certified safety valve repair quotation

Shipment: All products and/or services covered by the quotation are sold F.O.B. either our plant in Linden, NJ or the manufacturer"s plant for the parts and/or valves required, unless otherwise indicated. The risk of loss or damage in transit will be upon the purchaser. The products will be prepared for shipment in a manner prescribed by us or the manufacturer and shipped by any public carrier which we deem satisfactory, unless the purchaser provides other specific shipping instructions when placing orders. Any date provided by us for completion of work or for shipment is intended as an estimate only and is not to be deemed a term of the quotation. Shipping charges shall be pre-paid and billed at the time of shipment.

Warranties and Limitations: We warrant only that our products will conform to their description herein and that at the time of sale our products will be free from defects on workmanship and material. The name and reputation of Certified Valve Repair stands prudently behind every valve or piece of equipment we recondition. We are valve repair specialists, if at any time, in any way, a valve or piece of equipment that we have repaired fails to provide complete satisfaction, please bring the matter to our attention. Every repaired valve, pump, instrument, or equipment when used in accordance with the manufacturer and our recommendations is guaranteed to be free from defective workmanship and material. We will repair or replace without charge, F.O.B. our plant any repaired unit which our own examination proves to be defective within a period stated by our firm at the time of delivery. We assume no responsibility for incidental damage or expense. Authorization is required before returned articles will be accepted.

Taxes: Any sales, use/excise taxes and applicable state and local taxes, required to be collected by Certified shall be added to quoted prices and billed at time of invoicing, unless the purchaser provides us with a tax exemption certificate acceptable to the relevant taxing authorities.

Legislation requires that the owner of a facility has access to repair and recertification documents for pressure management equipment. Our pressure management experts provide relief valve asset audits to generate, maintain, and utilize applicable data for use in your facility’s maintenance planning activities and recertification.

We provide onsite safety relief valve diagnostic testing and repair services while helping you manage your overpressure protection assets for regulatory compliance.

Legislation requires that the owner of a facility has access to repair and recertification documents for pressure management equipment. Our pressure management experts provide relief valve asset audits to generate, maintain, and utilize applicable data for use in your facility’s maintenance planning activities and recertification.

IVI is a VR certified safety valve repair facility, approved by the National Board of Boiler and Pressure Vessel Inspectors as a VR certificate holder (stamp 179). We certify pressure relief valves in the shop and in the field for sections V and UV. We also perform on-site testing (while the plant operates) providing documented reports for all valves tested. We are also certified to administer special process conversions regarding machining, welding, heat treating, and N.D.T. (non-destructive testing) with our VR certificate.

With our VR stamp, we repair all types of pressure relief valves such as Consolidated, Crosby, Kunkle, Farris, Spence, Anderson Greenwood, and numerous other O.E.M. safety and pressure relief valves.

To ensure that pressure relief valves relieve and flow properly, the ASME and the National Board of Pressure Vessel Inspectors certify all assembly programs, testing facilities, and even technicians under the VR Valve Repair program. Dante Valve is proud of our VR program certification and our ability to offer VR valve repair at our California location.

Accreditation under the National Board’s VR program ensures the quality of all valve repairs, the authenticity of materials, and the completion of work in accordance with established quality protocols. All VR valve repairs receive the VR stamp upon repair completion.

Utilizing state-of the-art diagnostic, measurement, weld repair, and machining equipment, we provide comprehensive valve repair regardless of valve type, pressure class, or manufacturer.

We are National Board certified for repair of safety and relief valves, regardless of manufacturer, media, or pressure class. Certified services are available on-site or at one of our local repair facilities, featuring:

Ensure compliance, prevent overpressure and protect downstream equipment with industry regulated repairs for Section I & Section VIII Pressure and Safety Relief Valves. We offer rapid response and delivery times to minimize plant downtime while maximizing valve performance. We service all major makes and manufacturers for emergency, maintenance and scheduled outage needs. We also repair and replace conservation, tank and vacuum vents. Contact our sales team today to receive a quotation to repair, test or replace your safety relief valves.

Valsource is certified by The National Board of Boiler and Pressure Vessel Inspectors to repair and test Section I and Section VIII Pressure relief and Safety Relief Valves. Every valve is repaired to standards set by The National Board’s VR program. We provide 24/7 repair, testing and engineering services. We also maintain an extensive inventory and can provide replacement valves and parts with same day delivery options.

Valsource provides 24/7 repair and testing services in our shop or in the field. Our valve program allows our technicians to repair, remove, install and test your pressure relief and safety relief valves on-site. Using our AVK Electronic Test Vessel Package, our technicians are able to accurately test safety relief valves on-site without removing them from line. The primary function is to verify the set pressure in-line without having to shut down a system or unit. This service is a sure way to guarantee minimal downtime and peak valve performance. If you are preparing to service your boiler, Valsource technicians will come to your site and test each main steam safety valve to determine which valves require service. We will perform the repairs in-house or on-site using our 53’ field machining trailer, install and re-test back to calibrated set points.

If you need the best in valve repair and remanufacturing, Valsource can deliver the right options for your company. We offer rapid response times and emergency repair services available to resolve unplanned outages quickly. Our experienced technicians look forward to working with you to determine the most effective solutions for your valve repair needs.

Experitec is an authorized Anderson Greenwood™ and Crosby™ assembler and a National Board-Certified VR, Test Only, and ASME UV stamp holder. As such, we carry an extensive inventory of Anderson Greenwood and Crosby parts and assemblies right on the shelf. In addition, we have the ability to source pressure relief valves from a variety of manufacturers. This combination allows Experitec to repair all your pressure relief valves. Our vision is to serve our customers like no others. We can and will cater to your specific needs. Remember, don’t let the lack of a qualified PRV repair compromise the safety of your plant and your people.

Need more flexibility? We offer our customers the option of providing an Experitec 40-foot mobile repair trailer on-site or a 16-foot trailer for those smaller and quick turnaround jobs.

Specialized in maintenance and repair services for valves, boilers, heat exchangers, regulators, actuators, turbines and other products. Capabilities include in-line machining, fabrication, turning, welding, engineering, inspection, testing and consulting. Suitable for petrochemical, pharmaceutical, commercial, construction, power generation, HVAC, pulp and paper applications. Additional services include polishing, sandblasting, powder coating, plating and painting. Serves the chemical, hospital, oil, gas, manufacturing plant, food and beverage industries. Meets ASME standards and military specifications. 1-year warranty.

Certified Safety Valve Repair, located in Linden, NJ, has served the tri-state area for over 30 years. Providing service to Power Generating, Chemical and Manufacturing Plants and even our U.S. Navy Vessels.

Certified Safety Valve Repair has been authorized by the National Board of Pressure Vessel Inspectors, VR program to repair and certify any Section I or Section VIII Pressure Relief Device.

We are also the authorized repair facility for Anderson Greenwood Crosby Valve. This corporation is one of the leaders in the industry for manufacturing Section I, and Section VIII Safety-Relief Valves.

Our corporation is fully insured and certified by the Association of Safety Valve Calibrators, The Defense Manufacturers & Suppliers Association and the Quality Control Motivations Program, just to name a few.

Our rigorous training and real-world experience means you get experienced, knowledgeable factory-certified technicians who are dedicated to serving your needs 24 / 7 / 365.

Our nationally certified Valve Repair Centers in Winslow, ME and Cazenovia, NY are staffed by factory-trained and certified technicians.Masoneilan Authorized Repair Centers (MARC)

We have the capability to service your safety, pressure relief and control valves at your site or in one of our repair centers. Our services include:Inspection & testing

From high-quality products to repairs, from installation and set-up to regular maintenance and testing –you name it, we"ve got it. We also have in-stock valves and critical products that can be hard to find, especially for emergency service jobs.

The Mec-Tric Repair Shop is an ASME (American Society of Mechanical Engineers) and National Board certified repair shop. Our certifications include Section I (boiler code) and Section VIII (pressure vessel code). We are authorized in these sections for Air, Steam, Water, and Vapor.

Mec-Tric Control Company is authorized to assemble and repair safety valves by the National Board and A.S.M.E Code Section I and Section VIII for Air, Steam, Liquid, and Vapor.

Mec-Tric Control Company is the representative for the most well known regulator, the Spence regulator. Being a manufacturers representative gives Mec-Tric an advantage over other repair facilities. We repair regulators to like new condition and inventory many sizes and types.

We also repair and assemble Control Valves giving the same attention as our Safety Valve and Regulator programs. Mec-Tric calibrates the valve to receive pneumatic signals as well as electro-pneumatic signals.

We also provide in place testing at your facility or factory to minimize down time. Mec-Tric’s in place testing equipment allows for diagnosis of valves operating correctly and repair of valves not meeting specifications. This helps eliminate customer down time and limits the amount of valves customers must maintain in stock.

We have a 3,000 ft2 staffed facility with factory trained technicians and engineers to service and repair a wide variety of measurement, process control and gas detection equipment. Our technicians are able to perform service on site or in our workshops and are available to respond to most urgencies on a 24 hour, round the clock, basis.

Our technicians are trained and certified by Vega Americas Inc for the commissioning and diagnosis of all level measuring instruments for the provinces of Ontario, Quebec and the Maritimes. Whether for a radar, a level reading by pressure or commissioning of a nuclear product for level, density or weight on a conveyor our technicians will be able to support you.

Our technicians also have Yokogawa Corporation of America certification for the commissioning and diagnosis of all pressure, flow, temperature, controllers, data logging, lasers and many other measuring instruments. We are certified for the provinces of Ontario, Quebec and the Maritimes.

The National Board requires that the owner of a facility has access to repair and recertification documents for pressure management equipment. Our pressure management experts provide relief valve asset audits to generate, maintain, and utilize applicable data for use in your facility’s maintenance planning activities and recertification for all your PRV’s.  Customers have real-time access to all documentation through a secure portal.

We also offer our “ANSI” shop, repairing and selling rebuilt pumps, ball valves, orbits and gate valves. Our on-site service utilizes four mobile units and one emergency unit.

We also recognize the importance of safety and training. The Mercer Valve Repair Division has an extensive training program to ensure that only qualified technicians are working on our customer’s valves.

Mercer Valve began its valve repair business in 1986, under the direction of Wesley L. Taylor. We became “VR” certified in 1986. In the fall of 1989, Glen Quillin became the Valve Repair Manager where he brought fifteen years of oil and gas industry experience to Mercer’s team. Since then, the Repair Division has grown from a two-man shop to 21 employees.