co2 tank safety valve in stock

This CMBecker CO2 regulator (1-product / 1-pressure) features a CGA 320 nut for connecting to your CO2 cylinder. The locking knob allows you to set and keep your desired serving pressure.

CMBecker CO2 Regulators were collaboratively designed by draft beer professionals in Germany, USA and Portugal. These CO2 regulators are professional grade and built to last. The CMBecker line of regualtors has one of the best warranties in the business. The dual gauge feature of this regulator allows you to view remaining CO2 cylinder pressure as well as pressure output to your draft system. The on-body PRV (pressure relief valve) is an additional feature that allows you to depressurize your system at the regulator, rather than at the keg.

Blow off caps for CO2 bottles from Power Tank. These safety devices are designed to fail at 3000 psi preventing damage to your Power Tank bottle, valve, or regulator from over pressurization. This is usually caused from excess heat on a full or almost full CO2 tank. The more liquid CO2 in your tank, the less room for expansion of CO2 vapor. It is very important to weigh your Power Tank before and after a fill so that you can ensure that your gas supplier did not overfill your tank. If you live in a hot climate, it is a good idea to slightly underfill your tank.

If your blow off cap ruptures, your CO2 will vent from the bottle and you will have to replace the cap and refill your bottle. Check with your gas supplier first to see if they have one of these in stock (most of them do). Otherwise, purchase one of these from us and have them install it. A certified gas technician needs to replace this cap, otherwise you will void your warranty.

Dual guage regulator. Lets you monitor both the pressure of beer and pressure of CO2 tank. This great regulator works with any Co2 Tank with a CGA-320 valve and measures PSI as well as the volume of the Co2 gas in the Cylinder. The second gauge indicates how much Co2 is left in the cylinder and when it should be refilled. The screw in the center is used to adjust the output pressure.

This double gauge regulator features a forged brass and die cast body for durability accurate machining molded nylon inslet seal stainless steel valve seats for high corrosion resistance stainless steel inlet filter and a constant pressure supply at high output flow rates. The safety relief valve releases at 51-53 PSI. This regulator is also UL Listed.Primary Double Gauge

3 to choose from! CO2 CHANGE-OVER. Allows two CO2 tanks to work together, preventing any CO2 supply interuption. Swagged fitting connections prevent...

I then removed the gas in QD and put it back on my still-to-be-drained corny keg containing my IPA. That keg got drained this weekend at a nice neighborhood party down the street. So I come back home to get my American Wheat Keg and I spray my StarSan like I always do over the QD"s, both posts, and the relief valve. After connecting the QD"s I was amazed to see the bubbles emanating from the relief valve with pressures of just 10 psi.

Since we have heard many times about racers forgetting to turn their air bottle on, and in turn losing a round, we decided to search for a product to prevent that occurrence. Well, here it is, the CO2 "Automatic Shutdown Valve". You can hook this up to your ignition switch, and never have to turn the bottle on or off again. This system mounts easily between your bottle and regulator, and the solenoid can withstand up to 3000 lbs of pressure. 12v and 16v compatible.