danfoss safety valve quotation

The Danfoss SFVL safety valves are back-pressure dependent pressure relief valves. These are designed for protection of vessels and other components against excessive pressure. These valves are recommended as an external and internal safety relief valve in refrigeration plants. These valves are manufactured according to strict quality demands and safety requirements for refrigeration installations, as specified in many markets and comply with ASHRAE Addendum15C-2000. These valves are manufactured in accordance with the ASME Quality Control Procedures and stamped with the UV symbol. They are certified by the United States National Board of Boiler & Pressure Vessel Inspectors and are stamped with the NB symbol.

With the SFA 10 and DSV 10 change-over valve, Danfoss is widening its range of highly reliable safety valves designed to industrial standards. The new safety valves with their lower capacity and higher pressure range up to 65 bar provide more flexibility in system design. The SFA 10 can now be used in C02 applications on the low-pressure site as well as in low-charge ammonia systems. Furthermore, the spring housing is designed for reliability, increased lifetime, and to have no sudden reliefs below set pressure.

We bring forth for our clients a wide range of Safety Ammonia Valve, which is right angled and loaded with spring. Safety Ammonia Valve are available in screwed type. The valve is made of high grade material and built with great precision and normally set at 250 pounds and 300 pounds per square inch pressure.

These valves are manufactured using high grade raw material, sourced from some of the most reliable vendors of the industry. Available in various sizes , these products can be availed from us as per the clients" specific requirements. Beside this, we provide this product to our customers at pocket friendly prices.

Made up by 2 relief valves with crossed tank, this valve is used to block pressure to a certain setting in the 2 ports of an actuator/hydraulic motor. It’s ideal to provide protection against sudden shock pressures and to adjust different pressures in the 2 ports of an hydraulic circuit as well. Direct flange is ideal for Danfoss motors type OMS, OMP-OMR and OMT and provides a maximum safety, very low pressure drops and solid installation.

Danfoss solenoid valve is a famous product originating from Denmark, Danfoss manufacturer not only produces itself solenoid valve but the company also guarantees the production of valves and fittings in the pipeline system.

In 1933 Mads Clausen founded his own company called "Dansk Køleautomatik og Apparatfabrik", in 1946 the company changed its name to Danfoss as it is now.

Danfoss products are diverse in types and sizes, the company is constantly improving and developing to produce and provide customers with the highest quality valve products.

The body of the mechanical valve is made of copper, stainless steel or plastic, the valve body has two fluid inlet ports, on the valve body there is an arrow symbol for installation in the direction of water flow, valve disc, sealing gasket and shaft The valve is also a small part of the valve body.

With this device they are widely used in compressed air or high pressure liquid environments, valves have models EVR 2, EVR 3, EVR 6, EVR 10, EVR 15, EVR 20, EVR 25, EVR 32 , EVR 40, EVR 50.

This product line uses voltages of 12v, 24v, 110v, or 220v to operate, the valve is made of stainless steel material, which helps to withstand chemicals and has excellent oxidation resistance.

A comprehensive supplier of power and motion control components and systems, Vickers became part of Eaton in 1999. One of the most experienced and respected names in hydraulics, Vickers produces a wide range of vane & piston pumps, valves, electro-hydraulic controls, cylinders, and filtration products. These products are found in industrial, mobile, aerospace, marine, and defense applications worldwide. Vickers also pioneered the industry’s first fluid analysis service, a tradition carried on by Eaton Fluid Analysis Laboratory.

Efficient performance and precise operation with the PVG proportional valves. Load sensing proportional valve type PVG 120 is a combined directional and flow control valve which is supplied as a valve group consisting of modules specified to match particular customer needs. The flexible nature of this valve will allow an existing valve bank to be easily adapted to suit changes in requirements.

Valves & Manifolds└ Hydraulics, Pneumatics, Pumps & Plumbing└ Business & IndustrialAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else