danfoss safety valve for sale

With the SFA 10 and DSV 10 change-over valve, Danfoss is widening its range of highly reliable safety valves designed to industrial standards. The new safety valves with their lower capacity and higher pressure range up to 65 bar provide more flexibility in system design. The SFA 10 can now be used in C02 applications on the low-pressure site as well as in low-charge ammonia systems. Furthermore, the spring housing is designed for reliability, increased lifetime, and to have no sudden reliefs below set pressure.

If you are looking for Danfoss USA Product Store and catalog - which enables you to purchase our products - then please select the USA Product Store button.

If you are looking for Danfoss USA Product Store and catalog - which enables you to purchase our products - then please select the USA Product Store button.

Pressure setting [bar]: 25, Connection type: G, Inlet connection size [in]: 3/4, Outlet connection size [in]: 1, Pressure certificate: Danfoss certificate included

Keep Supply is your trusted source for relief valves. Therelief valve is designed or set to open at a predetermined set pressure to protect pressurevessels and other equipment from being subjected to pressures that exceed their design limits.We carrier solenoid from Danfoss, Hansen and more.For all your parts needs, we are here to help.

Valves & Manifolds└ Hydraulics, Pneumatics, Pumps & Plumbing└ Business & IndustrialAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

New design according to Service Bulletin: SB-1989-002. This design replaces the previous shim adjustable charge relief valve. This improvement changes the design of the charge relief valve poppet and plug.

Danfoss will offer this adjustable charge relief valve kit for sale as a service part. This kit can be used to service any vintage series 90 variable pump. Since the new and old style charge relief valves are interchangeable as an assembly, the old style parts will no longer be available as service parts.

Made up by 2 relief valves with crossed tank, this valve is used to block pressure to a certain setting in the 2 ports of an actuator/hydraulic motor. It’s ideal to provide protection against sudden shock pressures and to adjust different pressures in the 2 ports of an hydraulic circuit as well. Direct flange is ideal for Danfoss motors type OMS, OMP-OMR and OMT and provides a maximum safety, very low pressure drops and solid installation.

Find in our Safety relief valves Catalog Product references such as: 148F3325 Danfoss, 148F3337 Danfoss, 148F3322 Danfoss, 148F4007 Danfoss, 148F4008 Danfoss, 148F3233 Danfoss, 148F3231 Danfoss, 2416+300 Danfoss, 148F4111 Danfoss, 2416+274 Danfoss, 148F4130 Danfoss, 2416+266 Danfoss, 148F3326 Danfoss, 148F3310 Danfoss, 2416+317 Danfoss

Which you can buy and have in UNITED STATES normally in a delivery time of 48 to 72 hours The convenience of buying Safety relief valves online on our website will allow you to enjoy more of your valuable time, place your order with us, leave the supply in our hands

Save money buying Safety relief valves with prices for resellers. We are a safe and reliable online business, our presence for more than 25 years in the international market endorse us, also find special offers for Safety relief valves

DSV 1 and DSV 2 are change-over valves, which are designed to meet all industrial refrigeration application requirements. DSV valves are designed specifically for use with double safety valve systems.

The valves are designed to give favourable flow characteristics and are easy to dismantle for servicing. The valve cone is designed to ensure perfect closing, even with minimum torque the valve will close effectively.