danfoss safety valve pricelist

With the SFA 10 and DSV 10 change-over valve, Danfoss is widening its range of highly reliable safety valves designed to industrial standards. The new safety valves with their lower capacity and higher pressure range up to 65 bar provide more flexibility in system design. The SFA 10 can now be used in C02 applications on the low-pressure site as well as in low-charge ammonia systems. Furthermore, the spring housing is designed for reliability, increased lifetime, and to have no sudden reliefs below set pressure.

A set of radiator thermostats. RAE 5054 thermostatic element for RA connection with liquid filling, limitation of Min/Max settings, temp. limits 8-28 °C and RA-FN 15 valve without preset, for two-pipe systems, straight DN15/kvs 0.90 and RLV-S 15 shut-off valve DN15, straight, kvs 2.2

A set of radiator thermostats. RAE 5054 thermostatic element for RA connection with liquid filling, limitation of Min/Max settings, temp. limits 8-28 °C and RA-FN 15 valve without preset, for two-pipe systems, straight DN15/kvs 0.90 and RLV-S 15 shut-off valve DN15, straight, kvs 2.2

A set of radiator thermostats. RAE 5054 thermostatic element for RA connection with liquid filling, limitation of Min/Max settings, temp. limits 8-28 °C and RA-N 15 valve with preset, for two-pipe systems, corner DN15/kvs 0.90

A set of radiator thermostats. RAE 5054 thermostatic element for RA connection with liquid filling, limitation of Min/Max settings, temp. limits 8-28 °C and RA-N 15 valve with preset, for two-pipe systems, straight DN15/kvs 0.90

VFG2 PN16 DN150 kvs 280 control valve two-hole working temperature 2+140 °C connection - flange, stroke 24 mm (30 mm with AMV613-Y60), gray cast iron EN-GJL-250 (GG-25)

VFG2 PN16 DN200 kvs 320 control valve two ports working temperature 2+140 °C connection - flange, stroke 24 mm (30 mm with AMV613-Y60), gray cast iron EN-GJL-250 (GG-25)

VFG2 PN16 DN250 kvs 400 control valve two-hole working temperature 2+140 °C connection - flange, stroke 24 mm (30 mm with AMV613-Y60), gray cast iron EN-GJL-250 (GG-25)

VFG2 PN25 DN15 kvs 4 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 6 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN20 kvs 6.3 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 6 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN25 kvs 8 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 6 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN32 kvs 16 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 8 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN40 kvs 20 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 8 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN50 kvs 32 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 12, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN65 kvs 50 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 12, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN80 kvs 80 control valve two ports working temperature 2+200 °C connection - flange, stroke 18 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN100 kvs 125 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 20 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN125 kvs 160 control valve two-hole working temperature 2+200 °C connection - flange, stroke 20 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN16 DN15 kvs 4 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN20 kvs 6.3 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN25 kvs 8 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN32 kvs 16 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 8 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN40 kvs 20 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 8 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN50 kvs 32 control valve two ports working temperature 2+200°C (350°C with accessories) connection - flange, stroke 12, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN65 kvs 50 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 12, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN80 kvs 80 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 18 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN100 kvs 125 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 20 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN125 kvs 160 control valve two ports working temperature 2+200 °C (300 °C with accessories) connection - flange, stroke 20 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN150 kvs 280 control valve two ports working temperature 2+200 °C (300 °C with accessories) connection - flange, stroke 24 mm (30 mm with AMV613-Y60), gray cast iron EN-GJL-250 (GG-25 )

VFGS2 PN25 DN15 kvs 4 regulating valve two-hole working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN20 kvs 6.3 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN25 kvs 8 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN32 kvs 16 regulating valve two-hole working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 8 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN40 kvs 20 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 8 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN50 kvs 32 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 12, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN65 kvs 50 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 12, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN80 kvs 80 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 18 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN100 kvs 125 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 20 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN125 kvs 160 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 20 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VMV PN16 DN15 kvs 2.5 control valve three-hole RAV type connection working temperature 2+120°C connection - internal thread, Rp½, stroke 2 mm, red bronze - Rg5

VMV PN16 DN20 kvs 4 control valve three holes RAV type connection working temperature 2+120°C connection - internal thread, Rp¾, stroke 2.1 mm, red bronze - Rg5

VMV PN16 DN25 kvs 6.3 control valve three holes RAV type connection working temperature 2+120°C connection - internal thread, Rp1, stroke 2.6 mm, red bronze - Rg5

VG2 PN25 DN32 kvs 12.5 control valve two-hole working temperature 2+150°C connection - external thread, G1¾, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VG2 PN25 DN40 kvs 16 control valve two-hole working temperature 2+150°C connection - external thread, G2, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VG2 PN25 DN50 kvs 20 control valve two-hole working temperature 2+150°C connection - flanged G2½, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VGF2 PN25 DN32 kvs 12.5 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VGF2 PN25 DN50 kvs 25 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

AVQM PN16 DN15 kvs 0.4 control valve two-hole control limits 0.015-0.18 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN15 kvs 1 regulating valve two-hole regulation limits 0.02-0.4 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN15 kvs 1.6 regulating valve two-hole regulation limits 0.03-0.86 (0.9) m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN15 kvs 2.5 regulating valve two-hole regulation limits 0.07-1.4 (1.6) m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN15 kvs 4 regulating valve two-hole regulation limits 0.07-2.2 (2.4) m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN20 kvs 6.3 control valve two-hole control limits 0.16-3 (3.5) m3/h working temperature 2+150°C connection - external thread, G1, stroke 7 mm, red bronze - Rg5

AVQM PN16 DN25 kvs 8 control valve two-hole adjustment limits 0.2-3.5 (4.5) m3/h working temperature 2+150°C connection - external thread, G1¼, stroke 7 mm, red bronze - Rg5

AVQM PN16 DN32 kvs 10 control valve two-hole control limits 0.16-5.5 (6) m3/h working temperature 2+150°C connection - external thread, G1¾, stroke 10 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 0.4 control valve control limits Qmin 0.015 Qnom 0.18 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 1 control valve control limits Qmin 0.02 Qnom 0.4 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 1.6 control valve control limits Qmin 0.03 Qnom 0.86 Qmax 0.9 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 2.5 control valve control limits Qmin 0.07 Qnom 1.4 Qmax 1.6 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 4 control valve control limits Qmin 0.07 Qnom 2.2 Qmax 2.4 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN20 kvs 6.3 control valve control limits Qmin 0.16 Qnom 3 Qmax 3.5 m3/h working temperature 2+150°C connection - external thread, G1, stroke 7 mm, red bronze - Rg5

AVQM PN25 DN25 kvs 8 control valve control limits Qmin 0.2 Qnom 3.5 Qmax 4.5 m3/h working temperature 2+150°C connection - external thread, G1¼, stroke 7 mm, red bronze - Rg5

AVQM PN25 DN32 kvs 12.5 control valve control limits Qmin 0.4 Qnom 8 Qmax 10 m3/h working temperature 2+150°C connection - external thread, G1¾, stroke 10 mm, malleable cast iron EN-GJS-400-18- EN (GGG-40.3)

AVQM PN25 DN40 kvs 16 control valve control limits Qmin 0.8 Qnom 10 Qmax 12 m3/h working temperature 2+150°C connection - external thread, G2, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT ( GGG-40.3)

AVQM PN25 DN50 kvs 20 control valve control limits Qmin 0.8 Qnom 12 Qmax 15 m3/h working temperature 2+150°C connection - external thread, G2½, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT ( GGG-40.3)

AVQM PN25 DN32 kvs 12.5 control valve control limits Qmin 0.4 Qnom 8 Qmax 10 m3/h working temperature 2+150°C connection - flange, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT (GGG -40.3)

AVQM PN25 DN40 kvs 20 control valve control limits Qmin 0.8 Qnom 10 Qmax 12 m3/h working temperature 2+150°C connection - flange, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3 )

AVQM PN25 DN50 kvs 25 control valve control limits Qmin 0.8 Qnom 12 Qmax 15 m3/h working temperature 2+150°C connection - flange, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3 )

AMV55 gear reverse ~230V 2000N three-position control signal, no position signal, with mechanical manual control, IP54 connection with valve - clamp, stroke 40 mm, speed 8s/mm

AME55 gear reverse ~24V 2000N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, IP54 connection with valve - clamp, stroke 40 mm, speed 8s/mm

VFS2 PN25 DN15 kvs 4 regulating valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN20 kvs 6.3 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN25 kvs 10 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN32 kvs 16 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN40 kvs 25 regulating valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN50 kvs 40 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN65 kvs 63 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN80 kvs 100 regulating valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN100 kvs 145 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN65 kvs 63 control valve two-hole working temperature (-10)+150°C connection - flange, stroke 30 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN80 kvs 100 regulating valve two-hole working temperature (-10)+150°C connection - flange, stroke 34 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN100 kvs 160 control valve two-hole working temperature (-10)+150°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN125 kvs 250 control valve two-hole working temperature (-10)+150°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN150 kvs 400 regulating valve two-hole working temperature (-10)+150°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN200 kvs 630 control valve two-hole working temperature (-10)+150°C connection - flange, stroke 50 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN250 kvs 900 regulating valve two-hole working temperature (-10)+150°C connection - flange, stroke 50 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF3 PN16 DN100 kvs 145 regulating valve three-hole working temperature (-10)+130°C connection - flange, stroke 30 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN125 kvs 220 regulating valve three-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF3 PN16 DN150 kvs 320 control valve three-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF3 PN16 DN20 kvs 6.3 regulating valve three-hole working temperature (-10)+130°C connection - flange, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN80 kvs 100 regulating valve three ports working temperature (-10)+130°C connection - flanged, stroke 20 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN200 kvs 630 control valve three-hole control characteristic working temperature (-10)+130°C connection - flange, stroke 70 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN250 kvs 1000 regulating valve three-hole regulating characteristic working temperature (-10)+130°C connection - flange, stroke 70 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN300 kvs 1250 control valve three-hole control characteristic working temperature (-10)+130°C connection - flange, stroke 80 mm, gray cast iron EN-GJL-250 (GG-25)

VL3 PN6 DN80 kvs 100 regulating valve three ports working temperature (-10)+130°C connection - flange, stroke 20 mm, gray cast iron EN-GJL-250 (GG-25)

VF2 PN16 DN100 kvs 145 regulating valve two-hole working temperature (-10)+130°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF2 PN16 DN125 kvs 220 regulating valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF2 PN16 DN150 kvs 320 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

AME130 gear reverse ~24V 200N control uniform 0(2)-10V; 0(4)...20 mA no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 24s/mm

AME130H gear reverse ~24V 200N control uniform 0(2)-10V; 0(4)...20 mA no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 24s/mm

AMV13 SD drive reverse without mechanical manual control with safety function 2+55°C ~230V 300N consumption 7VA control signal three-position, no position signal, IP54 M30, stroke 5 mm, 14s/mm

AMV150 gear reverse ~230V 250N three-position control signal, no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 4 mm, speed 24s/mm

AME10 gear reverse ~24V 300N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 14s/mm

AMV20 gear reverse ~230V 450N three-position control signal, no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 14s/mm

AME20 gear reverse ~24V 450N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 14s/mm

AMV30 gear reverse ~230V 450N control signal three-position, no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 3s/mm

AME30 gear reverse ~24V 450N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 3s/mm

AMV23SD gear reverse ~230V 450N control signal three-position, no position signal, without mechanical manual control with safety function working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 14s/mm

AME140 gear reverse ~24V 200N control uniform 0(2)-10V; 0(4)...20 mA no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 12s/mm

AME140H gear reverse ~24V 200N control uniform 0(2)-10V; 0(4)...20 mA no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 12s/mm

AMV33 SD gear reverse ~230V 450N control signal three-position, no position signal, without mechanical manual control with safety function working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 3s/mm

AME438SU drive reverse ~24V 450N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, working temperature 2+55°C IP54 connection with valve - clamp, stroke 15 mm, speed 15s/mm

AMV438 SU drive reverse ~230V 450N control signal three-position, no position signal, without mechanical manual control with safety function working temperature 2+55°C IP54 connection with valve - clamp, stroke 15 mm, speed 15s/mm

HRE3 PN6 DN20 kvs 6.3 control valve three ports working temperature 2+110 °C connection - internal thread, Rp¾, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE3 PN6 DN25 kvs 10 control valve three-hole working temperature 2+110 °C connection - internal thread, Rp1, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE3 PN6 DN32 kvs 16 control valve three-hole working temperature 2+110 °C connection - internal thread, Rp1¼, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE3 PN6 DN40 kvs 25 control valve three ports working temperature 2+110 °C connection - internal thread, Rp1½, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE3 PN6 DN50 kvs 40 control valve three ports working temperature 2+110 °C connection - internal thread, Rp2, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN20 kvs 6.3 control valve four holes working temperature 2+110 °C connection - internal thread, Rp¾, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN25 kvs 10 control valve four ports working temperature 2+110 °C connection - internal thread, Rp1, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN32 kvs 16 control valve four ports working temperature 2+110 °C connection - internal thread, Rp1¼, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN40 kvs 25 control valve four ports working temperature 2+110 °C connection - internal thread, Rp1½, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN50 kvs 40 control valve four ports working temperature 2+110 °C connection - internal thread, Rp2, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 0.63 control valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 1 regulating valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 1.6 control valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 2.5 control valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 4 control valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN20 kvs 6.3 control valve two-hole working temperature (-10)+130°C connection - external thread, G1¼, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN25 kvs 10 control valve two-hole working temperature (-10)+130°C connection - external thread, G1½, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN32 kvs 16 regulating valve two-hole working temperature (-10)+130°C connection - external thread, G2, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN40 kvs 25 control valve two-hole working temperature (-10)+130°C connection - external thread, G2¼, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN50 kvs 40 control valve two-hole working temperature (-10)+130°C connection - external thread, G2¾, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 0.63 control valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 1 regulating valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 1.6 control valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 2.5 regulating valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 4 control valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN20 kvs 6.3 control valve three-hole working temperature (-10)+130°C connection - external thread, G1¼, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN25 kvs 10 control valve three-hole working temperature (-10)+130°C connection - external thread, G1½, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN32 kvs 16 control valve three-hole working temperature (-10)+130°C connection - external thread, G2, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN40 kvs 25 control valve three-hole working temperature (-10)+130°C connection - external thread, G2¼, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN50 kvs 40 control valve three-hole working temperature (-10)+130°C connection - external thread, G2¾, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VB2 PN25 DN15 kvs 0.25 control valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN15 kvs 0.4 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN15 kvs 0.63 control valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN15 kvs 1.6 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN15 kvs 2.5 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN20 kvs 6.3 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN40 kvs 25 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN50 kvs 40 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

NVD895 PN16 DN50 kvs 35.7 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN65 kvs 64.7 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN80 kvs 116.1 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN100 kvs 253.3 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN125 kvs 481.8 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN150 kvs 698.4 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN200 kvs 1345.5 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD895 PN16 DN250 kvs 2249.5 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD895 PN16 DN300 kvs 3098 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD895 PN16 DN400 kvs 5867 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN50 kvs 39.4 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN65 kvs 83 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN80 kvs 138 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN100 kvs 250 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN125 kvs 505 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN150 kvs 891 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN200 kvs 1510 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN250 kvs 2746 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN300 kvs 3936 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN350 kvs 4254 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN400 kvs 5000 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN450 kvs 6547 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN500 kvs 7800 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN600 kvs 11269 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD812 PN40 DN15 kvs 4.24 non-return valve medium - water or glycol mixture 50% (-10)+350°C connection - inter-flange installation in all directions AISI304

NovoCon®S electric actuator for Ds10-32 mm valves, 24V AC/DC, control signal - BAC net MS/TP, Modbus RTU, 0-10V, 0(4)-20 mA, IP54, stroke 7 mm, speed 3/ 6/12/24 s/mm,

NovoCon®M electric actuator for Ds40-100 mm valves, 24V AC/DC, control signal - BAC net MS/TP, Modbus RTU, 0-10V, 0(4)-20 mA, IP54, travel 15 mm, speed 7/ 14 s/mm

ASV-P DN 15 / kvs 1.60, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 10 kPa, 1.5 m. capillary, closing, draining.

ASV-P DN 20 / kvs 2.50, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 10 kPa, 1.5 m. capillary, closing, draining.

ASV-PV DN 15 / kvs 1.60, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 20 / kvs 2.50, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 25 / kvs 4.00, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 32 / kvs 6.30, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 32 / kvs 6.30, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 20-60 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 40 / kvs 10.00, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 20-60 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 20 / kvs 2.50, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. With shells

ASV-PV DN 25 / kvs 4.00, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. With shells

ASV-PV DN 32 / kvs 6.30, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. With shells

ASV-PV DN 50 / kvs 20.00, external thread automatic balancing valve, maintains equal pressure difference between risers. Setting 20-40 kPa, 1.5 m. capillary, closing, draining.

ASV-PV DN 65 / kvs 30.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 20-40 kPa, 1.5 m. capillary, closure.

ASV-PV DN 80 / kvs 48.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 20-40 kPa, 1.5 m. capillary, closure.

ASV-PV DN 100 / kvs 76.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 20-40 kPa, 1.5 m. capillary, closure.

ASV-PV DN 50 / kvs 20.00, external thread automatic balancing valve, maintains equal pressure difference between risers. Setting 35-75 kPa, 1.5 m. capillary, closure.

ASV-PV DN 65 / kvs 30.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 35-75 kPa, 1.5 m. capillary

ASV-PV DN 80 / kvs 48.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 35-75 kPa, 1.5 m. capillary

ASV-PV DN 100 / kvs 76.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 35-75 kPa, 1.5 m. capillary

ASV-PV DN 50 / kvs 20.00, external thread automatic balancing valve, maintains equal pressure difference between risers. Setting 60-100 kPa, 1.5 m. capillary

ASV-PV DN 65 / kvs 30.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 60-100 kPa, 1.5 m. capillary

ASV-PV DN 80 / kvs 48.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 60-100 kPa, 1.5 m. capillary

ASV-PV DN 100 / kvs 76.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 60-100 kPa, 1.5 m. capillary

ASV-PV DN 50 / kvs 16.00, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 20-60 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-BD DN 20 LF / Kvs 3.00, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV overshoot regulators.

ASV-BD DN 20 / Kvs 6.60, internal thread DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV overshoot regulators.

ASV-BD DN 25 / Kvs 9.50, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV sag regulators.

ASV-BD DN 32 / Kvs 18.00, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV sag regulators.

ASV-BD DN 40 / Kvs 26.00, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV overshoot regulators.

ASV-BD DN 50 / Kvs 40.00, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV sag regulators.

MSV-BD 15 Balance valve with ball valve shut-off function, measuring/drainage rotating 360ºC nozzles, DN15 - 3.0, internal thread, DZR bronze and MSV-S 15 DN 15 / Kvs 3.00 internal thread, DZR bronze ball valve with drainage function

MSV-BD 20 Balance valve with ball valve shut-off function, measuring/drainage rotating nozzles 360ºC, DN 20 / Kvs 6.60, internal thread, DZR bronze and MSV-S 20 DN 20 / Kvs 5.90, internal thread, DZR bronze ball valve with drainage function

MSV-BD 25 Balance valve with ball valve shut-off function, measuring/drainage rotating 360ºC nozzles, DN 25 / Kvs 9.50, female thread, DZR bronze and MSV-S 25 DN 25 / Kvs 9.30, female thread, DZR bronze ball valve with drain function

MSV-BD 32 Balance valve with ball valve shut-off function, measuring/drainage rotating nozzles 360ºC, DN 32 / Kvs 18.00, internal thread, DZR bronze and MSV-S 32 DN 32 / Kvs 17.70, internal thread, DZR bronze ball valve with drain function

MSV-BD 40 Balance valve with ball valve shut-off function, measuring/drainage rotating 360ºC nozzles, DN 40 / Kvs 26.00, female thread, DZR bronze and MSV-S 40 DN 40 / Kvs 25.70, female thread, DZR bronze ball valve with drain function

MSV-BD 50 Balance valve with ball valve shut-off function, measuring/drainage rotating 360ºC nozzles, DN 50 / Kvs 40.00, female thread, DZR bronze and MSV-S 50 DN 50 / Kvs 41.40, female thread, DZR bronze ball valve with drain function

FHF-4 1" Adjustable underfloor heating collector, with integrated shut-off valves in supply and pre-setting thermostatic valves in return, 4+4, 2 pcs.

FHF-5 1" Adjustable underfloor heating collector, with integrated shut-off valves in supply and pre-setting thermostatic valves in return, 5+5, 2 pcs.

FHF-7 1" Adjustable underfloor heating collector, with integrated shut-off valves in the supply and preset thermostatic valves in the return, 7+7, 2 pcs.

FHF-8 1" Adjustable underfloor heating collector, with integrated shut-off valves in the supply and pre-setting thermostatic valves in the return, 8+8, 2 pcs.

FHM-C1 water mixing unit for floor heating, with UPM3 15-70 pump, with two-way thermostatic valve (temp, limits for floor contour 18-50°C), manual drain, thermometer. Connection to the collector 1", connection to the system ½". Working pressure PN10. The distance between the connecting pipes for the collector is 213mm.

SSM-3F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 3+3, 2 pcs., drainage and manual drains, 2 pcs.

SSM-4F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 4+4, 2 pcs., drainage and manual drains, 2 pcs.

SSM-5F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 5+5, 2 pcs., drainage and manual drains, 2 pcs.

SSM-6F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 6+6, 2 pcs., drainage and manual drains, 2 pcs.

SSM-7F 1" Adjustable steel underfloor heating collector, with flow meters in supply and preset thermostatic valves in return, 7+7, 2 pcs., drainage and manual drains, 2 pcs.

SSM-8F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 8+8, 2 pcs., drainage and manual drains, 2 pcs.

SSM-9F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 9+9, 2 pcs., drainage and manual drains, 2 pcs.

SSM-10F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 10+10 2 pcs., drainage and manual drains, 2 pcs.

SSM-11F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 11+11, 2 pcs., drainage and manual drains, 2 pcs.

SSM-12F 1" Adjustable steel underfloor heating collector, with flow meters in supply and preset thermostatic valves in return, 12+12, 2 pcs., drainage and manual drains, 2 pcs.

SSM-3 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 3+3, 2 pcs., drainage and manual drains, 2 pcs.

SSM-4 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 4+4, 2 pcs., drainage and manual drains, 2 pcs.

SSM-5 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 5+5, 2 pcs., drainage and manual drains, 2 pcs.

SSM-6 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 6+6, 2 pcs., drainage and manual drains, 2 pcs.

SSM-7 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 7+7, 2 pcs., drainage and manual drains, 2 pcs.

SSM-8 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 8+8, 2 pcs., drainage and manual drains, 2 pcs.

SSM-9 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 9+9, 2 pcs., drainage and manual drains, 2 pcs.

SSM-10 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 10+10 2 pcs., drainage and manual drains, 2 pcs.

SSM-11 1" Adjustable steel underfloor heating manifold, with preset thermostatic valves in the return, 11+11, 2 pcs., drainage and manual drains, 2 pcs.

FHF-ME2 1" adjustable underfloor heating collector 2+2, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME3 1" adjustable underfloor heating collector 3+3, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME4 1" adjustable underfloor heating collector 4+4, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME5 1" adjustable underfloor heating collector 5+5, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME6 1" adjustable underfloor heating collector 6+6, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME7 1" adjustable underfloor heating collector 7+7, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME8 1" adjustable underfloor heating collector 8+8, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

CF-DS Dew point sensor for power supply 24V AC/DC; 3mA, transformer required. The dew point sensor is installed at the bottom of the supply manifold, connected to the controllers of the Danfoss LINK HC or CF-MC systems.

SonoSafe 10 meter for heating DN15 qp0.6m³/h G¾ for 110mm return pipeline Θ: 5-95°C PN16 IP54 Pt1000 Ø5.2mm DS 1.5m battery 3.6V DC (1 AA-cell) min. 11-year-old M-Bus. Set with valve and fittings

Safety valves Danfoss is of Danish origin. From the Danfoss brand, manufacturing equipment such as safety valves, solenoid valves, pressure relief valves...

Safety valve company Danfoss is a Danish valve company, Danfoss was founded in 1933, initially just a small company, until now Danfoss has grown strongly into a leading organization in the world in the work. manufactures and supplies industrial valve products on the market.

The Danfoss safety valve company operates extensively in markets around the world. With an open field of development, Danfoss products have been developed and supplied to more than 100 countries on all continents.

Danfoss also provides technologies for a number of industries such as power solutions, climate solutions, sensor solutions, compressed air solutions, fire safety.

Danfoss products are very diverse, because Danfoss" fields of activities are very diverse, popular products such as valves, faucets of all kinds, compressors, pipe equipment, accessories, engine equipment, machines pumps, heat exchangers, cylinders, pumps… In general, Danfoss offers a wide range of products to customers.

Currently, Danfoss has been popular in Vietnam market quite a lot, products such as solenoid valves, safety valves are probably the most used products.

Safety valve BSV 8 is a safety valve product line manufactured from cast iron body, stainless steel head, BSV 8 product is a product with a typical input size of ¾", typical output size is first".

Danfoss SFA 10 safety valve is a safety valve product line made from stainless steel material line, very good quality, stainless steel material has advantages to mention such as anti-corrosion, anti-rust.

This is a 10H safety valve product line that is set up with a switch valve device to install two safety valve products operating in the same system, using two 10H safety valve products.

Safety valve products SFA 15 have very good corrosion resistance, besides, this safety valve product line made from micro-stainless steel material is also resistant to dirt and deposits, so this type of safety valve This safety is capable of working in applications with high requirements for hygiene and safety. The most typical are applications in food production.

The Danfoss SFV 20 safety valve is a threaded product line, a direct acting safety valve product, which can be used for a variety of water and steam applications.

Danfoss solenoid valve is a famous product originating from Denmark, Danfoss manufacturer not only produces itself solenoid valve but the company also guarantees the production of valves and fittings in the pipeline system.

In 1933 Mads Clausen founded his own company called "Dansk Køleautomatik og Apparatfabrik", in 1946 the company changed its name to Danfoss as it is now.

Danfoss products are diverse in types and sizes, the company is constantly improving and developing to produce and provide customers with the highest quality valve products.

The body of the mechanical valve is made of copper, stainless steel or plastic, the valve body has two fluid inlet ports, on the valve body there is an arrow symbol for installation in the direction of water flow, valve disc, sealing gasket and shaft The valve is also a small part of the valve body.

With this device they are widely used in compressed air or high pressure liquid environments, valves have models EVR 2, EVR 3, EVR 6, EVR 10, EVR 15, EVR 20, EVR 25, EVR 32 , EVR 40, EVR 50.

This product line uses voltages of 12v, 24v, 110v, or 220v to operate, the valve is made of stainless steel material, which helps to withstand chemicals and has excellent oxidation resistance.

We bring forth for our clients a wide range of Safety Ammonia Valve, which is right angled and loaded with spring. Safety Ammonia Valve are available in screwed type. The valve is made of high grade material and built with great precision and normally set at 250 pounds and 300 pounds per square inch pressure.

These valves are manufactured using high grade raw material, sourced from some of the most reliable vendors of the industry. Available in various sizes , these products can be availed from us as per the clients" specific requirements. Beside this, we provide this product to our customers at pocket friendly prices.

Danfoss STC angleway and straightway Shut-off valve family ranges from DN 15-150 with cap or handwheel option. The new Shut-off valves are designed referring European standards to meet the challenges in industrial refrigeration application requirements in Asia. The valves ensure favorable flow characteristics and are easy to dismantle and repair if required. The new packing gland design is

New products for Danfoss acquires AAIM Controls 2019!

Contacts:EAST CENTRAL WESTSGS Sales SWR Sales Industrial Refrigeration Equipment Partners(240) 420-1966 (210) 492-8024 Daniel Sniatowskicathy.spellar@sgsrefrigeration.com joe@swrsales.com (604) 219-6049 Daniel@irepcold.comRegional Sales Manager Regional Sales ManagerJohn Thomas Ryan Wenrich Regional Sales Manager(410)-513-1172 (410) 513-1186 Adam Andersonjthomas@danfoss.com ryanwenrich@danfoss.com (410) 209-9160 adamanderson@danfoss.com

NATIONAL SALES SERVICE AND SUPPORTNorth American Segment Director Customer Service & OrderingJim Hower 1-888-DANFOSS (1-888-326-3677)

t 24 hour(443) 912-9555 Cooling.CS.IR.NA@Danfoss.comjames.hower@danfoss.com Fax: (410) 931-0679 us a bo uNational Sales Manager Ask fo r pricing Technical Support ce ssBrian Kelly 1-888-DANFOSS (1-888-326-3677) web ac r tracking!(414)-552-9017brian_kelly@danfoss.com Ext. 2046 Cooling.TS.IR.NA@Danfoss.com and or d eBusiness Development Manager Warranty Claims DepartmentTerry Chapp (410) 513-1197(410) 513-1146 uswarranty@danfoss.comterrychapp@danfoss.com

CONTENTS DESCRIPTIONTYPEPAGE Valve StationsICF 4-11 Shut-off Valves SVA 12-15 Check Valves SCA/CHV/NRVA 16-17 Hand Expansion Valves REG 18 Pressure Regulating Valves ICS 19-21 Flanged Drop-in replacement ICS-(H)S4A/(H)A4A 22 Pilot Valves for ICS/PM23 Ammonia Pressure Gauges23 Gauge, Purge, and Needle Valves SNV-ST/SNV-SS 24 Solenoid Valves EVRA/EVRAT/ICS25 Dual Position Solenoid ValvesICS-H26 Coils for Solenoid Valves26 Small Regulator ValveCVMD26 Electronic Expansion Valves AKVA 27 Motorized Valves ICM28 Flanged Motorized ValvesICM-HMMR/V29 Strainers (Filters) FA/FIA 30-31 Gas Powered Stop ValvesICLX 32 Filter DriersDCR32 Liquid Level Sensors AKS 4100U 33 Liquid Level Glasses LLG 34-35 Oil Drain Valves QDV 35 Float SwitchesAKS 3835 NEW Gas Detectors GD/GDH 36-37 Pressure and Temperature SensorsAKS/MBT38 Electronic Controllers EKC/EKE 39-40 Terms and Conditions 41-43

AT288964218750Danfoss 3ICF Valve StationList Pricing Effective: January 28, 2019

Common ICF applicationsApplication #1 is typically used for:Pumped liquid lines in flooded systems without hot gas defrost Application #1 has the following valve functions: Stop valve, strainer, solenoid with manual stem, HEV, stop valve Connection Type/ Type Part No. * List Price Size ICF20-6-1RA 3/4” SW 027L3005 $1,744 ICF20-6-1RA 1” SW 027L3007 $1,831 ICF20-6-1HRB 1” SW 027L3408 $2,260 ICF20-6-1HRB 1¼” SW 027L3409 $2,367 ICF25-6-1RA 1” SW 027L4003 $2,284 ICF25-6-1RB 1¼” SW 027L4013 $2,397 ICF25-6-1RB 1½” SW 027L4017 $2,562 Application #1 example:* Price does not include coil. Coil must be ordered separately; ICF 25-6-1RA see page 26 for coil ordering. M1 M3 M5 STOP SOLENOID HAND EXP.Stainless Steel ICF-SS, Application #1 Danfoss

Application #1 has the following valve functions: Stop valve, strainer, solenoid with manual stem, HEV, stop valve STRAINER BLANK STOP Connection M2 M4 M6 Type Part No. * List Price Type/Size ICF-SS20-6-1RA 3/4” BW Sch 40 027L3555 $3,052 ICF-SS20-6-1RA 1” BW Sch 40 027L3556 $3,205 ICF-SS20-6-1HRB 1” BW Sch 40 027L3578 $3,955 ICF-SS20-6-1HRB 1¼” BW Sch 40 027L3557 $4,142 ICF-SS25-6-1RA 1” BW Sch 40 027L3568 $3,997 ICF-SS25-6-1RB 1¼” BW Sch 40 027L3584 $4,195 ICF-SS25-6-1RB 1½” BW Sch 40 027L3570 $4,482* Price does not include coil. Coil must be ordered separately; see page 26 for coil ordering.

4 Danfoss AT288964218750ICF Valve StationList Pricing Effective: January 28, 2019

Application #2 and 3 are typically used for:Pumped liquid lines in flooded systems with hot gas defrost Application #2 has the following valve functions: Stop valve, strainer, solenoid with manual stem, HEV, stop/check valve Connection Type Part No. * List Price Type/Size ICF20-6-2RA 3/4” SW 027L3014 $1,831 ICF20-6-2RA 1” SW 027L3016 $1,923 ICF20-6-2HRB 1” SW 027L3412 $2,373 Application #3 has the following valve functions: Stop valve, strainer, solenoid with manual stem, check valve, HEV, stop valve Connection Application #2 example: Type Part No. * List Price Type/Size ICF 20-6-2RA ICF20-6-3HRB 1” SW 027L3416 $2,373 M1 M3 M5 STOP SOLENOID HAND EXP. ICF25-6-3RA 1” SW 027L4021 $2,398

Danfoss ICF25-6-3RB 1¼” SW 027L4031 $2,518 ICF25-6-3RB 1½” SW 027L4035 $2,715* Price does not include coil. Coil must be ordered separately; STRAINER MAN. STEM STOP/CHECK see page 26 for coil ordering. M2 M4 M6

Stainless Steel ICF-SS, Application #2 and 3 Application #3 example: ICF 25-6-3RB Application #2 has the following valve functions: Stop valve, strainer, solenoid with manual stem, HEV, stop/check valve M1 M3 M5 Connection Type/ STOP SOLENOID HAND EXP. Type Part No. * List Price

Danfoss Size ICF-SS20-6-2RA 3/4” BW Sch 40 027L3571 $3,205 ICF-SS20-6-2RA 1” BW Sch 40 027L3572 $3,365 STRAINER CHECK STOP M2 M4 M6 Application #3 has the following valve functions: Stop valve, strainer, solenoid with manual stem, check valve, HEV, stop valve Connection Type/ Type Part No. * List Price Size ICF-SS20-6-3HRB 1” BW Sch 40 027L3580 $4,154 ICF-SS25-6-3RA 1” BW Sch 40 027L3585 $4,197 ICF-SS25-6-3RB 1¼” BW Sch 40 027L3587 $4,406 ICF-SS25-6-3RB 1½” BW Sch 40 027L3588 $4,752* Price does not include coil. Coil must be ordered separately; see page 26 for coil ordering.

Application#47 is typically used for:Hot gas defrost lines to give a soft hot gas defrost Application #47 example: Application #47 has the following valve functions: ICF 50-4-47H50 Stop valve, strainer, ICSH dual position solenoid, stop valve ICS Port Connection M3 Type Part No. * List Price M1 DUALM3 POSITION Size Type/Size STOP SOLENOID SOLENOID ICF50-4-47H32 1¼” 1½” SW 027L5070 $3,078 Danfoss

AT288964218750Danfoss 5ICF Valve StationList Pricing Effective: January 28, 2019

Application #9 and 10 are typically used for:Hot gas defrost lines Application #9 has the following valve functions: Stop valve, strainer, solenoid with manual stem, stop valve Connection Type/ Type Part No. * List Price Size ICF15-4-9H 1/2” SW 027L4527 $1,369 3/4” SW 027L3351 $1,550 ICF20-4-9H 1” SW 027L3336 $1,628 1” SW 027L4064 $1,847 ICF25-4-9 1¼” SW 027L4069 $1,978 1½” SW 027L4073 $2,198 ICF50-4-9S32 1½” SW 148X1505 $2,599 1½” SW 148X1514 $2,653 ICF50-4-9S40 2” SW 148X1519 $2,765 ICF50-4-9S50 2” SW 148X1500 $2,973 Application #10 has the following valve functions: Stop valve, strainer, solenoid with manual stem, HEV Connection Type/ Type Part No. * List Price Size 3/4” SW 027L3404 $1,550 ICF20-4-10HRB 1” SW 027L3402 $1,628 ICF25-4-10RA 1” SW 027L4077 $1,847 1¼” SW 027L4087 $1,978 Application #9 example: ICF25-4-10RB ICF 25-4-9 1½” SW 027L4091 $2,198 ICF50-4-10S32 1½” SW 148X1524 $2,599 M1 M3 ICF50-4-1