gas furnace safety valve price

A furnace gas valve replacement costs $200 to $800 on average. Furnace gas valve prices are $75 to $300 for the part alone or up to $600 for original manufacturer parts (OEM). Gas valve replacement labor costs $125 to $500. Furnace gas valve repair costs $75 to $200.

Furnace gas valve prices are $50 to $300 on average or up to $600 for original manufacturer parts (OEM) without installation. Gas valve prices depend on the type and brand.

A furnace gas valve repair costs $75 to $200 for diagnostics, valve cleaning, and tightening connections for minor problems. However, a faulty gas valve that needs internal repairs requires a full gas valve replacement. Only the part manufacturer can legally repair a gas valve for safety reasons.

The cost to replace a gas fireplace valve is $300 to $500 on average, including a full fireplace inspection and diagnostic tests. The total cost depends on the valve brand and fireplace accessibility.

The gas valve on a furnace opens or closes to regulate the gas flow to the pilot light and burners. A properly functioning gas valve is necessary to stop gas leaks and maintain indoor temperatures. Gas-valve designs are specific to different furnace makes and models.

If a furnace gas valve is bad, there will be no warm air coming from the furnace, or it will shut down completely. Faulty gas valves are a major safety concern. Contact an HVAC technician to test the valve and diagnose the source of the problem.

Some furnace gas valves are interchangeable between propane and natural gas models, depending on the furnace brand, location, type, and local building codes.

Replacing a furnace gas valve takes 30 to 60 minutes on average or up to 2 hours for hard-to-access locations like crawlspaces and small attics. This time includes HVAC diagnostic tests. Most technicians charge a minimum service fee regardless of the time spent.

Buy a furnace gas valve from Amazon, Walmart, or HVAC distributors and service companies for the widest selection. Buying directly from the manufacturer typically costs more but ensures an exact match.

A gas furnace offers an excellent and cost-effective form of heating your home–as long as it is working right. There is a lot that can go wrong, from a thermostat malfunction to problems with the heat exchanger, blower motor, a circuit board, a control board, a flame sensor, or igniter.

One of the most important parts of a furnace that needs to be kept in good working order is the gas valve. What happens when a gas valve breaks? A quick furnace fix is needed, and the part either repaired or replaced.

How much is that repair or replacement of the gas valve going to cost you? Can you do it on your own? Will a factory or home warranty help with that cost? Let’s dig in and find out.

According to sites like Home Advisor and CostEstimates.com, replacing the gas valve on your furnace can cost anywhere from $300 to $750 dollars. This includes the part itself and the services of an HVAC professional.

The valve itself can range from a cost of $90 to the mid $200s on the high end, depending on the manufacturer. Saving on labor can help you, but only if you know what you are doing around an expensive and potentially dangerous home system. In other words, be careful if you decide to DIY this project!

Furnace repair or replacement can add up. To keep your furnace in top working order, here are some basic tips for furnace maintenance from the US Department of Energy’Vent Connections – connections to vents and chimneys are one of the first places in your heating system that can deteriorate over time.

A functioning gas valve is one of many factors in an efficient heating system, along with clean and tight ductwork, and furnace parts like a thermocouple, draft inducer, or control valve.

This is where the bulk of your furnace cost will be, whether you are replacing a gas valve or any other part. We estimate you can save $200 – $500 by installing a gas valve yourself if you are out of the manufacturer’s warranty and don’t have a home warranty. Just be sure you know what you are doing and can do the install safely.

Furnace repair costs can be tricky. There are a lot of complicated parts jammed into a compact space. Like many parts in a gas furnace, the gas valve can sometimes be repaired. In some cases, just a good cleaning is what is needed. But if an actual repair is needed, often the cost of the repair is so similar to replacement costs that it makes just as much sense to get a new, well-functioning gas valve instead of repairing the old one.

A gas valve as a replacement part can be pricey – over $200 in some cases. Add to that the labor costs and, as we mentioned above, the cost can range from $300 – $750.

And if discovering a problem with a gas valve leads to discovering bigger problems, the replacement of the whole system with a new furnace might be necessary. In that case, be sure you have the rightpermits from your local government.

A warranty for a natural gas furnace from the original equipment manufacturer (OEM) like Lennox, Goodman, Bryant, Honeywell, Amana, or Trane can be helpful but limited. For instance, A Trane registered warranty will cover parts such as a gas valve or pilot light, but will not cover the labor it takes to install the valve.

So a new system is great, but be sure to understand the limitations of the manufacturer’s warranty. And make sure you mark a calendar to know when the warranty runs out or you become responsible for the full cost of repair or replacement of a gas valve or other furnace part.

A home warranty will cover parts and labor for the repair or replacement of a furnace gas valve. There will be exclusions depending on the home warranty company you work with–such as exclusions for improper maintenance or mismatched parts or systems.

You’ll need to factor in the annual cost of a home warranty–which tends to run around the same cost as the professional replacement of a gas valve alone–along with the service call fee–which can be anywhere from the mid-$60s to $125 depending on the type of home warranty plan and the provider you choose. For instance, AHW has a policy premium that runs around $475 with a flat $75 service call fee. Or American Home Shield has a Systems Plan for around $420 and a service call fee between $75 and $125 with a lower premium depending on the service call fee.

A home warranty can provide protection for your furnace–when things like a gas valve break down–and provide peace of mind for other systems and appliances in your home.

Unless you have some training in heating and air conditioning systems, it might be a better choice to leave furnace gas valve replacement or repair to the professionals. It may not be the most technically challenging repair on your furnace, but if you don’t have the experience, it’s worth the expense.

Two-stage and variable capacity gas valve replacement can beas high as $850, but are usually closer to $500. These are the cost of gas valve replacement when you hire a furnace repair technician for the work.

Parts Cost:Replacement gas valves cost from $65 to $300 or more for the part. Cost depends on gas line size, gas valve stages, 1, 2 or variable, and the manufacturer. A quick inventory reveals a cheap Rheem/universal 1-stage gas valve for below $60, an Amana/Goodman single-stage valve for about $150, Carrier unit for $250 and a Lennox 2-stage gas valve for $300. A Trane modulating gas valve goes for a little more than $300.

One of the most common issues that come up with any furnace problems is that the gas valve will fail. You can clean the valve to try to remedy the problem, and that will buy you time. Remove the valve, and gently clean it with Emery cloth. If the hole is visibly clogged, do what you can to remove the buildup.

Is it under warranty?Before you decide to hire an HVAC technician to check your furnace and see if your gas valve needs to be replaced, check the warranty on your furnace. Most furnaces have a 10-year parts warranty. The warranty will cover the replacement cost of the part, but it does not cover labor.

There are many factors that will contribute to the overall cost to replace the gas valve for your furnace. First, whether you have a single or a two-stage or variable-capacity furnace. Two-stage and modulating furnaces require a more expensive valve.

Most furnaces either use natural gas or propane as fuel for the furnace. Gas valves generally will be set up or come standard for natural gas, so if you need to convert the valve to propane you can expect to pay around $35 for the conversion kit.

There are very few things that you might need to purchase in addition to the part. Some gas valves require a wiring harness. The wiring harness is usually included with the gas valve, but you may have to purchase it separately for between $10 and $30. We recommend replacing the wiring, since the part is cheap and takes just a few minutes for you or a furnace technician to install.

Not only do you most likely want to know if your furnace gas valve is not functioning properly, you will also want to know what caused it to actually fail. There are few possible reasons why gas valves often fail. Over many years, gas valves will simply wear out and need to be replaced. Also, if the valve happens to be submerged or have any water seepage, this can cause the valve to fail.

Electrical issues can also be the issue. The components that make up the gas ignition system or if there is a short in the safety circuit will make the valve not work properly. Finally, the thermocouple, also called the flame sensor, may need to be replaced or at least cleaned or replaced. Both cleaning and replacing are DIY jobs.

Troubleshooting a furnace that won’t start involves checking the gas valve. One sure sign that the valve needs replacing is that it shuts down, and the burner goes out, before your thermostat is satisfied. The valve is either stuck or not working properly.

Another way to check your gas valve to see if it is leaking when it should be closed is to coat the area around the valve with soapy water. If there is any sort of leak at all, the escaping gas will cause the water to bubble up, and you will be able to see it very clearly. This will show that your valve is faulty and needs to be replaced. Finally, if your furnace burners are sputtering or making other unusual noises, or if the burners run for a long time without warming your home, then you should contact a licensed HVAC technician to determine if the problem is the gas valve or if there are other problems with your furnace.

Replacing a furnace gas valve is something that a homeowner can accomplish on their own by following the directions carefully. YouTube has many videos available to walk you through the process including the necessary safety steps of shutting off power and the gas supply before disconnecting the gas line to the valve.

Anytime you are working with gas or electricity, you run the risk of possible issues that may arise. Unless you are very familiar with working with gas and/or furnace systems, it is recommended that you hire a professional HVAC technician to replace the gas valve. It will most likely take less than a few hours to complete, and you will have the peace of mind that the job is done correctly the first time.

Gas valves are the devices that HVAC manufacturers and installation experts use to ensure safety and security in residential, or commercial settings. Gas valves help to control the flow of gas within a system, ensuring that everything runs according to plan. At Furnace Part Source, we find and stock the most reliable gas valves, from the best brands around the country, to give you performance that you can trust.

Whether you’re looking for diaphragm gas valves that contain a valve and actuator in a single body, or you need a solution in the form of combustion gas valves, you can find everything you’re looking for here at Furnace Part Source. We provide burner tubes, furnace gas valves, main burner assembly parts, slow open kits, and more. Our parts can handle gas in boilers, commercial water heaters, and heating systems. For that reason, we recommend that you peruse the various options for repair and replacement.

As any expert knows, an HVAC specialist can only build a great heating system with the best possible parts. At Furnace Part Source, we combine exceptional customer service with great prices and quick delivery, to give you the ultimate HVAC solution.

Standard solenoid valves are used for pneumatic gases; testing gas pressure at the valves is often the first thing HVAC technicians do when they are called in to check on faulty furnaces. Even though these systems are generally built to last, gas furnace valves are the parts more likely to need replacement over the life of the furnace.

For this reason, the Furnace Part Source keeps a wide assortment of valves to fit all major brands as well as systems that are not so common. Below are some of our most popular gas valves; they are offered at wholesale prices and are ready to ship on the spot.

This valve is for natural gas Carrier furnaces. It is a factory authorized part that includes the manifold and all other pieces needed for complete replacement.

Honeywell gas valves represent the brand’s dedication to quality. This universal part will fit various Honeywell gas appliances. In the case of Honeywell 24 Vac furnaces, it can handle either natural or liquefied petroleum gas when the adequate conversion kit is used. The current version of this gas valve features a compact design with a rotation radius of about four inches, thus making it easy to reposition as needed even in the tightest spaces.

This part will fit the Mighty Therm2 line of combination and natural gas boilers by Teledyne Laars. The V0079400 includes the kit for converting from propane, and it is very inexpensive when considering its durability.

Popular Emerson furnaces feature HSI and DSI electronic ignition systems. The 36J22-214 Emerson gas valve provides a one-stage fast opening system that fits into a very compact part for half-inch pipes. This is a straight-flow valve that includes a conversion kit for LP gas.

The Selectra line of modulator gas valves from Maxitrol feature unique systems for quick temperature control without the need of an actuating motor or butterfly valve. The M411 gas valve will fit half-inch and 3/8″ pipes. Both direct and indirect gas-fired appliances can be regulated with Selectra gas valves.

You need to know the signs of when your gas valve is failing. The first is if the valve is receiving an allotted number of volts to open or close — 24 is the standard –and you hear no internal clicking. That’s a sign that it may not be opening or closing.

Use an electronic gas sniffer to detect leaks. Leaks can be dangerous with the gas’s combustion properties. Assess pressure levels as well to see if the valve may not be working due to improper settings. Unclog your burner orifices and ductwork, since a lack of flow can also be the culprit.

If you have conducted all of these steps and the gas valve is still not working, then replace the valves. Never bang them with any tools to open them because that can risk an explosion.

When it comes to finding the right parts and equipment for your HVAC equipment needs, you can trust Furnace Part Source’s extensive catalog. Active since 2006, the catalog has more than 500,000 items offered at wholesale prices. You will find exactly what you need to replace control valves and prevent imminent shutoffs.

The furnace gas valve regulates pressure and flow of gas to the pilot light and burners. Gas valves are electrical and mechanical devices in various designs, including single stage, two stage, and modulating . In this section displayed are many replacement gas valves for repairing various HVAC applications.

HVACPartsShop.com is your #1 internet source for HVAC repair parts. We sell original equipment manufacturer (OEM) parts from most brands, including Lennox, Carrier, Bryant, Rheem, Ruud, Goodman, Armstrong, Trane, York, etal. We have a knowledgeable and friendly staff ready to assist you. If you ever need assistance choosing the right Blower Motor, Gaskets Burner, Electric Heat Kit, Flame Sensor, Flue Part, Gas Valve, Heat Exchanger, Ignitor, Induce Draft Blower, LP Conversion Kit, Pilot Burner, Pilot Orifice, Pressure Switch, Thermocouple, Blower Part, Cabinet Part, or Control Board please contact us via Live Chat or call us at 1-866-215-3831.

During the winter months, a damaged or broken furnace is a huge inconvenience. If you suspect your furnace may need repair, address the issue as soon as possible. Whipple Service Champions can help you keep your house heated with its affordable furnace repair service. Costs will vary depending on several factors, but you can get an estimate based on the average cost to replace certain parts or fix specific issues. Read on to learn more about the average furnace repair costs for various furnace problems.

Since there are so many possible furnace problems to repair, there is an extensive wide range of potential costs. Furnace repairs range from around $500 to $1000 at the highest range in the United States. If your furnace happens to be under warranty when it needs repair, replacement parts may be covered by the warranty. If this is the case, you will only need to cover the cost of labor and service fees. Otherwise, you will also need to factor in the cost of replacement parts into your estimated cost. When you are estimating the cost of your repair job, be sure to consider whether it would be a good investment to replace the furnace entirely. When it gets to be more than 10 years old, you might want to replace the furnace instead of getting it fixed, so you can avoid having to continue replacing parts frequently.

When we send out an expert member of our team to repair your furnace, this fee helps cover their time and labor. Service fees tend to be higher for emergency jobs outside regular service hours, such as evenings or weekends. Doing regular maintenance can help you avoid having to make a last-minute call that results in a higher bill. Having filters changed, checking the furnace for leaks, and keeping it clean can extend the life of your furnace and keep repair bills lower.

Problem igniters are one of the most common problems and reasons for repair. When they are not maintained with regular cleaning, they can build up dirt quickly and stop functioning. They are often replaced as an emergency job, which adds up to a cost somewhere around $300-$400 due to service fees. If they are replaced during normal hours, they can cost around $200. A failed ignitor can also damage other parts of the furnace, such as the circuit board. It’s important to replace an ignitor before it can cause other problems.

The heat exchanger is a vital component of your furnace. Heating fluid combusts inside this part, which heats up the air that will be circulated throughout your home to keep it warm. If your heat exchanger cracks, it can cause serious problems including carbon monoxide leaks.

Flame sensors ensure that the gas valves stay closed unless there is a flame available to burn the gas, which prevents gas leaks by preventing a buildup. It is a metal rod that sits in front of the furnace’s flame. Repairs and replacements will both stay within the range of $80-$250.

Many furnaces have multiple circuit boards, but some only have a motherboard. Circuit boards control the operation of the other parts, including the motors and sensors. Repairs and replacements are around $900, depending on the extent of the repair needed.

The pressure sensor, or switch, in your furnace, helps ensure the furnace is drafting and expelling excess gases. There are two types, high and low-pressure switches, for different kinds of furnaces. They prevent the flame from lighting if there is a buildup of gas that could be dangerous. The cost of replacing this switch can range from $40-$350, depending on the type of switch. There are two types, high and low-pressure switches.

Gas valves control the flow of gas into your furnace. As they get older, they can sometimes lose the ability to open and close when necessary. Gas valves for two-stage furnaces tend to be more expensive than those for single-stage furnaces because they are more complex. If your gas valve needs to have a liquid propane valve added during installation, the price will also be higher by about $50. Universal gas valves are cheaper than brand name valves. With all this in mind, the price for a replacement job on a gas valve ranges from $195 to $870.

Avoid high repair bills or dangerous furnace problems by scheduling regular maintenance. A technician can check the state of your furnace and its parts, as well as replace the filter and clean the interior. An annual inspection can alert you to failing parts before they cause extensive damage or become a safety hazard. Save money on the cost to replace furnace parts by getting replacements done as soon as possible so that you can be prepared for winter or sudden cold days. Some good maintenance tasks to start with are:

If your furnace needs repairs, chances are you have noticed some of the signs that parts have stopped working. The most obvious way to tell your furnace needs repairs is when it blows cold air out. This shows that it isn’t doing its most important job, which is heating air. New, loud noises suggest that a part is loose and is banging around inside the furnace. Higher heating bills tell you that the furnace is losing its efficacy and efficiency, probably due to an issue with one of its parts. Another clear sign that something is wrong is a yellow pilot light. If it is yellow, carbon monoxide may be leaking from your heat exchanger. Always be sure to call an expert if your furnace is having issues. Some furnace problems are extremely dangerous and can cause poisoning or fires. Technicians can provide quick and effective help for broken or damaged components.

The gas valve of the furnace is the fuel unit of the furnace. This valve in the furnace can close and open as well. The design of the furnace valve is rather simple. Although, this valve requires proper care and maintenance as it is a very important part of the furnace.

The thermopile is the power generator that opens the primary valve. It is the section of the valve that is submersed in the flame in the pilot light. The thermopile is supposed to be heated right to let the gas valve to stay open. If the furnace valve closes, the pilot light stops receiving gas. This is also a safety design to avoid an accumulation of gas in homes.

All the valves are very safely placed in the right order. Whenever the unit senses an obstruction in the working of the system of the circuit is automatically interrupted.

The gas chain valve consists of the solenoid valve, the manual valve, and pilot safety. This type of valve will let you close and open the gas valve manually.

The thermopile should be producing an adequate voltage for the primary valve to stay open. There is a definite need for a replacement if the voltage is not enough.

A house with a furnace is very comfortable in the winter season. But the furnace needs to be taken care of to avoid the immature wearing out of its parts. A typical furnace can be used for up to 20 years. However, after a certain point, some issues cannot be neglected. It not only affects the working of the furnace but also the power consumption at your place.

While the furnace might not be in use in the summer season, but you should maintain it and check the parts every few months. Especially before the winter arrives. In some areas, the lack of heat in houses lead to the potential bursting of the pipes after being frozen.

That being said, anything with heat can be extremely dangerous if not maintained properly. And with furnaces, there is always a risk of leakage and fire.

The gas valve is the fuel unit of the furnace and needs to be checked even more carefully. The furnace needs adequate gas supply to be functioning and that can be achieved only when the gas valve is in a suitable condition.

If you have figured out that your valve requires replacement then you can proceed further. You can always contact us for any assistance needed anywhere in the process.

Firstly, you will need to cut off the gas supply. This is the first and very crucial step in the process. Leaving the gas supply will lead to gas leakage.

Now once the gas supply is checked, you can take the old valve out. Use your toolkit to loosen the screws. Be gentle as you do not want to be breaking the parts. When you have the valve loose, you can take it out by your hand.

Fit the new valve. Use your toolkit to fix everything in place as not doing so will be a hazard to your safety. Be gentle and check that the pipes are not getting affected. Double and triple-check that the valve is firmly attached.

You can always use the internet and the tutorials as a guide while changing the gas valve yourself. If you want to know an estimate of your time and expenditure, feel free to contact us. We pride ourselves as being one of the best furnace repair companies in the local area. Contact us today to learn how we can help!

With the weather changing, now is a great time to get prepared with heating specials at Faucet Depot! Shop gravity gas comfort wall furnaces by Cozy Heaters in 25,000, 35,000 and 50,000 BTU models. Cozy wall furnaces are excellent for new construction or remodel projects.

Gas Safety ValvesThese valves automatically control main gas flow. Our automatic pilot valves shut off both the main and pilot gases. Pilot gas is tapped from the main line within the control. Gas will flow only to the pilot burner when the reset button is depressed. The manual pilot valve stop can be adjusted for maximum pilot flow.