gas pilot safety valve supplier

When you’re working with gas, safety should be the name of the game. It’s extremely easy to cause a lot of damage, both to yourself and your establishment, when you’re not showing that invisible little devil the respect it deserves. Fortunately, modern-day gas safety valves have been tested and outfitted around the world, and these bad boys are essential pieces to any efficiently-working system. That said, when your gas safety valves are a little worse for wear, making a repair or finding a replacement is a no-brainer. That’s why keeping an extra in your repair kit or tool closet is a smart move, and we’ve got the gas safety valves you need!

This White Rodgers Safety Valve offers 100% shut off of both the pilot and the main gas burner if the pilot light is extinguished or is not sufficiently combusting. It is thermocouple-operated and does not require electricity to operate. It features a three-position control knob: Off, Pilot, and On.

This unit comes with the pilot light with 6" of ¼” aluminum tubing and a 6’ long thermocouple. This can be used with all domestic heating gases delivered up to 0.5 psi max. It offers two different gas inlets for your choice of a side inlet or bottom inlet and also includes the plug to seal the inlet opposite your choice. The inlets and outlet of the valve are ½” F NPT. Included are two bushings to reduce the inlet and outlet to 3/8” F NPT.

Gas Safety ValvesThese valves automatically control main gas flow. Our automatic pilot valves shut off both the main and pilot gases. Pilot gas is tapped from the main line within the control. Gas will flow only to the pilot burner when the reset button is depressed. The manual pilot valve stop can be adjusted for maximum pilot flow.

Pilot BurnersThese “J Series” combination pilot burners are universal replacement pilot burners and are supplied in three models. Mounting brackets on all four sides of each burner permit adaptation to almost any application. We also offer pilot burner fittings (R Series) and replacement flame sensors and inlet fittings (Y Series).

Gas Safety ValvesThese valves automatically control main gas flow. Our automatic pilot valves shut off both the main and pilot gases. Pilot gas is tapped from the main line within the control. Gas will flow only to the pilot burner when the reset button is depressed. The manual pilot valve stop can be adjusted for maximum pilot flow.

Pilot BurnersThese “J Series” combination pilot burners are universal replacement pilot burners and are supplied in three models. Mounting brackets on all four sides of each burner permit adaptation to almost any application. We also offer pilot burner fittings (R Series) and replacement flame sensors and inlet fittings (Y Series).

Searching for tools to control the flow of your piping system? Explore one of the largest featured collections of products and discover a range of wholesale pilot safety gas valve on Alibaba.com. When you search for pilot safety gas valve and related items, you will be able to find many types of pilot safety gas valve varying in size, shape, use, and quality, all at prices in which are highly reasonable!

There are many uses of valves - mainly controlling the flow of fluids and pressure. Some examples include regulating water for irrigation, industrial uses for controlling processes, and residential piping systems. Magnetic valves like those using the solenoid, are often used in a range of industrial processes. Whereas backflow preventers are often used in residential and commercial buildings to ensure the safety and hygiene of the water supplies. Whether you are designing a regulation system for irrigation or merely looking for a new replacement, you will be able to find whatever type of pilot safety gas valve that you need. Our products vary from check valves to pressure reducing valves, ball valves, butterfly valves, thermostatic mixing valves, and a lot more.

Distributor of hydraulic press safety, quick opening safety, rotary and safety valves. Amerigear®, Boston Gear®, Carlisle®, DeMag®, Desch® and IMI Norgren®, pneumatic, double action, quick release and flow control valves also provided. Repair and preventative maintenance services are offered. Value added services such as custom barcoding, CAD capabilities, OEM assembly, plant surveys and third party logistics are also available. Serves the metal processing, metal service center, paper mill and paper converting, canning, grinding, commercial laundry, marine, oil and gas and material handling industries. Vendor managed inventory (VMI) programs available. Kanban delivery.

RSTC210-600 - 210°F to 600°F - Robert-Shaw thermostat gas control, temperature control range of 210°F to600°F.Includes: thermocouple, pilot light, spark ignitor, temperature probe, and a 3/8"ID gas hose.

We have high quality Robert-Shaw thermostat gas controls which are ideal for smokers, smokehouses, deep fryers, hog roasters, pig cookers, and many other set-temperature control range applications.These thermostat gas control units are all-in-one assemblies which do not require electricity to operate. They have a built-in safety so that if the pilot light extinguishes, the gas to both the pilot and the burner(s) will be shut off within 20-30 seconds. Thermostat gas control unitscome with thermocouple, pilot light with tubing, piezo spark-ignitor to light the pilot, a temperature probe, and a 3/8” ID outlet gas hose. These pieces are all 5"-6’ in length. Thermostat gas control units will turn the burner on and off based upon the set temperature control range. Theycan be used with low pressure propane or natural gas; maximum inlet pressure is 0.5 psi.

If you have been searching for a safety release valve that you can use to reduce short-term pressure surges successfully and diminish the effects of gas leaks, this is the product for ...

... regulators have safety valves which will slam shut in the event of emergencies, such as the gas reaching too high a pressure level. The valve works to protect any fittings ...

This product has hydraulically actuated class A gas safety valves to EN 161 used for automatic shut-off. It shuts off when unstimulated for gas and air, ...

The S 104 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses ...

The S50 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses ...

The S100 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses ...

... Pressure Safety Valve + Rupture Disk is protected and may be utilized autonomously as essential security gadgets or in conjunction. There are 3 possible combinations. The first combinations ...

It"s a Safety valve in according with Directives ATEX 20K/34/EU. Technical Norm Fire Prevention 41/256 31/10/2019. d.P.R. 10/520 19/03/1955 and subsequent amendments.

This range of spring loaded conventional and balanced safety relief valves is specifically designed for overpressure protection of unfired pressure vessel (ASME Section VIII application). ...

130 Series Safety valves are also available as Relief valves. Relief valves, identified by the letter R after the type number, are devices with an operational function, ...

V651 Series safety relief valves are produced as safety and relief type. Safety valves are pressure relief elements used to evacuate excessive pressure ...

PVS type slam shut valves are pilot-operated relief valves in which the opening and the closing of the main plug is controlled by a pilot device which is very ...

The EMERSON BM7 SERIES is a disk slam-shut valve characterized as automatic isolating elements, which are suitable for installation as safety devices in regulating stations. This device has a high operation ...

... control and regulate the gas, air flow to burners and other combustion devices. HMV is a unique safety valve that can be supplied for the requiremen of handling higher ...

Type 50 is a safety valve for universal use. It can be used for nearly any industrial application, e.g. in shipping and pipeline construction, the chemical and petrochemical industries, ...

The RIEGER Safety valve Type SH prevents excessive pressure in steam and gaseous media in plant components and tanks. The set pressure is generally higher than the operating pressure of the system.

... sewage, gas, glycol, diathermic oil, industrial water, steam and other natural and aggressive media, depending on theresistance of materials usedfor the construction ofthe valve.