kunkle safety valve catalog brands

Kunkle delivers quality products from cryogenic to high temperature and vacuum to high pressure Steam, Air, Gas, and Liquid applications. Kunkle Valve provides code certifications that meet various global standards such as ASME, PED, CRN, TU and Chinese as well as non-code requirements.

Kunkle Relief Valve OverviewWhen it comes to industrial and commercial safety and relief valve products, Kunkle’s valve’s catalog is second to none in steam, air, gas, and liquid applications.

Kunkle relief valves range in size from ¼” NPT to 6” flange and are suitable in cryogenic and high temperatures up to 800°F environments at vacuum to 7,500 psig pressure. Kunkle Valve’s code certifications meet several global and national board standards, including ASME Section I, Section IV, and Section VIII, PED, CRN, TU and Chinese, as well as non-code requirements.

Relief Valves for Steam ServiceSteam supplies heat for industrial and chemical processes and also is used to heat buildings, supply mechanical energy, and drive mechanical equipment. Steam moves from the boiler to the end point, then heats by direct heating or indirect heating through a heat exchanger. Kunkle steam relief valves are critical to protecting equipment such as boilers, steam lines, and pressure valves, from being over-pressurized.

Relief Valves for Air ServiceKunkle designs valves for air service, for example for air compressors in mechanical shops and small factories where either low-pressure or high-pressure air is required. NASVI stocks Kunkle relief valves for air service in iron, steel and bronze for a variety of uses.

Relief Valves for Liquid ServiceKunkle also makes valves for liquid service, which provide bypass relief in a variety of applications and liquid types.

More About KunkleKunkle Valve is a renowned pressure relief valve manufacturer. Erastus B. Kunkle invented the safety valve to prevent overpressure in locomotive engines. Kunkle patented it in 1875. Since that time, Kunkle has earned its reputation for high-quality valves, and other equipment manufacturers ship their products with Kunkle’s valves pre-installed.

NASVI has stocked Kunkle safety relief valves since we opened in 1975, so we are confident when we call ourselves Kunkle safety valve experts. Every day we fulfill orders for our customers looking for Kunkle relief valves for steam, air, gas, and liquid applications.

Kunkle relief valves are available for ASME Section I, Section IV and Section VIII services with relief capacities certified by the National Board. In addition, Kunkle offers a range of non-code products and each valve, both code and non-code is set, tested, and retested to the customer’s specifications and then sealed at the factory to prevent tampering. Flotech is a Kunkle valve distributor.

Kunkle safety and relief valve products range in size from 1/4-inch NPT through 6-inch flange and are suitable for services ranging from cryogenic to 850°F at set pressures ranging from vacuum to 6,500 psig. They are available in a wide range of materials including Brass, Bronze, Carbon Steel, Stainless Steel, Cast Iron, and Aluminum.

Brass or stainless steel safety valves with a choice of Buna-N (NBR), Viton® (FKM) or stainless steel seats that meet ASME section VIII, ‘UV’, for air/gas and are National Board certified

Kunkle steam relief valve with a 6" 250 psi flanged inlet x 8" 125 psi flanged side outlet. This valve can be set from 10 to 250 psi pressure with a 25,203 to 216,412 psi per hour capacity. Please state operating pressure when ordering. Kunkle 6252 series steam relief valves are used on steam boilers. These cast iron body with brass trim valves offer side outlet and semi-nozzle trim with steam pressures from 10 to 250 psi and 250°F.

Kunkle Valves is a leading manufacturer of quality safety and relief valve products in all types of materials and connections for commercial and industrial applications, including liquid, air, steam and non-hazardous gases. The Kunkle Safety Valves are manufactured of materials including bronze, steel, brass and stainless steel and adheres to the ASME Sections I and VIII, Steam V and UV, and ASME Section VIII, Air/Gas, UV with relief capacities certified by the National Board. Kunkle Relief Valves are also manufactured at facilities that meet the requirements of the ASME pressure vessel code.

Kunkle Relief Valves is a leading company in the industrial sector on design, manufacturing and distribution of pressure relief and security valves for fluid control at different pressures and temperatures.Kunkle valves have industrial and commercial uses, so you can be sure these are the right solution to control fluids and avoid high pressures damaging other system components.

And the best way to show the quality and the resistance of the valves is they are made of brass, carbon steel, bronze, cast iron, stainless steel and aluminum.

So, every and each one of your commercial and Industrial applications are covered with a brand of valves that offers quality and precision. In addition, you don’t need to do a lot in order to purchase these valves because we are Kunkle dealers in EEUU.

In our catalog we have all kinds of Kunkle valves available for you, with sale prices as we are direct dealers, this means, and no third parties. The company send the products directly to USA so you can have them. Where will you find Kunkle dealers that offer the same?

Kunkle pressure relief valvecan be purchased preset per your requirements up to a pressure of 25 psig and a minimum pressure of 3 psig.Kunkle Model 337 pressure relief valves for positive displacement blowers are designed with 3 inch NPT port connections to accommodate handle high air flow capacities.

The Kunkle Model 337 pressure relief valve that can be purchased preset per your requirements up to a pressure of 25 psig and a minimum pressure of 3 psig.Pressure relief valves protect blowers from excessive back pressure and are commonly referred to as a "pop off valve" in the pneumatic conveying industry.