seizing wire rope ends pricelist

The majority of Loos & Co manufacturing is dedicated to the manufacturing of Military Specification wire rope fittings, connectors, and terminations. These products are on the QPD (Qualified Producers Database) for the US Government. There are several hundred product numbers that are produced and warehoused in our Naples plant. Additionally, they manufacture the swaging machines and tools necessary to connect the manufactured hardware to the numerous types of wire rope.

applies on both sides of the place where the cut is to be made. In a wire rope, carelessly or inadequately seized ends may become distorted and flattened, and the strands may loosen. Subsequently, when the rope is operated, there

The two widely accepted methods of applying seizing are illustrated in Figures 25A and 25B. The seizing itself should be soft, or annealed wire or strand. Seizing wire diameter and the length of the seize will depend on the diameter of the wire rope. But the length of the seizing should never be less than the diameter of the rope being seized. Normally, for preformed ropes, one seizing on each side of the cut is sufficient. But for ropes that are not preformed or rotation resistant ropes, a minimum of two seizings on each side is recommended; and these should  be spaced six rope diameters apart (Fig. 26).

In these standard terms and conditions of supply: “Arcus” refers to Arcus Wire Group Pty Ltd (ABN 25 000 465 163); “Customer” refers to the person, firm or company ordering or buying the Goods or Services from Arcus; “Goods” means all products, including wire rope, fittings, tools, rod systems, balustrades, marine rigging, and any other goods supplied by Arcus to the Customer; and “Services” means any services supplied by Arcus to the Customer.

3.5 Arcus will not accept the cancellation of any order for, or return of, used or customised Goods or Goods supplied to special order (including orders for cut-lengths of wire or chain) unless those Goods are defective.

11.1 This clause 11 applies to the extent that these terms and conditions provide for or contain a ‘security interest’ for the purposes of the Personal Property Securities Act 2009 (Cth) (“PPS Law”) (or part of it).

11.8 The Customer waives its rights to receive a verification statement in relation to registration events in respect of commercial property under section 157 of the PPS Law.