shell naturelle s2 wire rope lubricant a manufacturer

Shell Naturelle S2 Wire Rope Lubricant A is a high performance fully biodegradable grease for use on open gears, wire ropes and cables. This product is formulated with renewable base fluids and contains a select blend of additives to offer corrosion resistance and high load carrying performance. Shell Naturelle S2 Wire Rope Lubricant A offers high resistance to water wash off due to its outstanding adhesion properties.

Shell Naturelle S2 Wire Rope Lubricant A is a high performance fully biodegradable grease for use on open gears, wire ropes and cables. Supplied in an 18kg Pail.

Lubricants with poor resistance to water wash-off may fail to protect your equipment, which means there is an increased likelihood of additional costs through unplanned maintenance or equipment downtime.

Shell Naturelle S2 Wire Rope Lubricant A is designed for wire ropes, open gears and other deck equipment. It has excellent adhesion properties and is formulated with a selected blend of additives to offer superior extreme-pressure and anticorrosion protection in the most challenging of environments.

Low-cost lubricants can be poor value if they fail to stay where you need them. Shell Naturelle S2 Wire Rope Lubricant A offers high resistance to water wash-off owing to its outstanding adhesion properties. This can help to cut product consumption and labour costs, thereby reducing the cost of keeping your mooring and crane wires protected and working efficiently.

VGP Compliant - Shell Naturelle S2 Wire Rope Lubricant A is an Environmentally Acceptable Lubricant under the definitions of the USA EPA 2013 Vessel General Permit.

Excellent Corrosion Protection - Formulated to include special anti corrosion additives to offer the best possible protection from corrosion, even under the influence of seawater.

Low toxicity towards the environment - Made from >60% renewable raw materials. Shell Naturelle S2 Wire Rope Lubricant A is also classed as minimally toxic and non-bioaccumulative.

Special purpose biodegradable synthetic wire rope and open gear lubricant in which US EPA VGP CompliantProduct #: goldenwellenergy-Shell Naturelle S2 Wire Rope Lubricant A https://www.goldenwell.store/i/Wy_wQIgAA 2023-12-10 Regular price: $HKD$5473.0 Available from: Golden Well Energy Company LimitedIn stock

wire ropes and cables. This product is formulated with renewable base fluids and contains a select blend of additives to offer corrosion resistance and high load carrying performance. Shell Naturelle S2 Wire Rope Lubricant A offers high resistance to water wash off due to its outstanding adhesion properties.

Antes de que usted pide, en contacto con nosotros con sus requisitos y que se citan un gastos de envío a través de nuestro servicio de mensajería internacional.

2 COMMITTED TO HELPING YOU Shell Marine Products is committed to helping you to meet the latest requirements of the US EPA 2013 VGP. We offer a range of biodegradable lubricants that are approved by leading manufacturers for use in applications that have a potential oil-to-sea interface. SHELL NATURELLE S4 STERN TUBE FLUID 100 DESIGNED TO PROVIDE SUPERIOR PROTECTION AND EFFICIENCY FOR STERN TUBES: OUR SPECIAL-PURPOSE, BIODEGRADABLE, SYNTHETIC STERN TUBE FLUID Shell Naturelle S4 Stern Tube Fluid 100 is a non-emulsifying synthetic fluid specifically developed for use in stern tubes. Manufactured from fully saturated esters, Shell Naturelle S4 Stern Tube Fluid 100 is designed to offer superior lubrication performance while also being readily biodegradable and having low ecotoxicity. Shell Naturelle S4 Stern Tube Fluid 100 is an environmentally acceptable lubricant according to the definitions of the US EPA 2013 VGP. Increased wear protection Ashless (zinc-free) additives provide protection over a wide range of conditions. Approvals from leading stern tube and seal manufacturers include* SKF Blohm + Voss Industries Wärtsilä Propulsion Kemel Aegir-Marine. Designed to offer superior lubrication performance Fully saturated esters ensure excellent resistance to oxidation and hydrolysis while offering high-temperature thermal stability. Excellent hydrolytic stability A non-emulsifying fluid with excellent water separation and anti-foaming characteristics that helps to maintain equipment performance. Environmentally considerate EU Eco Labelled Independently certified as VGP compliant. BEFORE AFTER In a simple visual demonstration, 40 ml of oil and 40 ml of water were mixed for 1 minute at 1,000 rpm under ambient conditions. The photos below were taken after 30 minutes settling time at room temperature. Shell Naturelle S4 Stern Tube Fluid 100 Emulsifying oil STERN TUBE FLUIDS ARE NOT ALL THE SAME Ingress of water in some types of stern tube fluids can produce an emulsion whereby the water held in this emulsion cannot be drained away. In these situations, the stern tube fluid increases in viscosity and becomes more susceptible to hydrolysis, which leads to the formation of harmful acids. Ultimately, the life of the stern tube fluid may be reduced and equipment wear may increase. RAPID WATER SEPARATION Clear separation of oil and water enables easy draining from the stern tube system THICK, VISCOUS MILKY EMULSION Water remains in the oil and in the system Shell Naturelle S4 Stern Tube Fluid 100 does not form an emulsion; instead, it has excellent water separation characteristics, which means water can be easily drained from the system. Manufactured from fully saturated synthetic esters, Shell Naturelle S4 Stern Tube Fluid 100 can help to extend fluid and equipment life by protecting against hydrolysis and oxidation.

3 SHELL NATURELLE HF-E 46 AND 68 EFFICIENCY FOR HYDRAULIC AND POWER TRANSMISSION SYSTEMS WORKING IN ENVIRONMENTALLY SENSITIVE AREAS FROM OUR FULLY SYNTHETIC HYDRAULIC FLUID CUTTING OPERATING COSTS Hydraulic fluids that fail to protect your equipment from wear and corrosion can increase maintenance costs and reduce equipment availability. Shell Naturelle Fluid HF-E helps to lower maintenance costs by offering excellent wear protection over a wide temperature range. The naturally high shear stable viscosity index (VI) of Shell Naturelle Fluid HF-E helps to deliver responsive performance from cold start to full-load, heavy-duty operation. 1,000 Typical HM 46 fluid Kinematic viscosity, cst SHELL NATURELLE FLUID HF-E 46 SHELL NATURELLE FLUID HF-E 68 Environmentally considerate EU Eco Labelled Independently certified as VGP compliant. Approvals from leading marine equipment manufacturers include* Rolls-Royce (stabilisers) Sperry Marine (stabilisers) Wärtsilä Propulsion (stern tubes). Specialist hydraulic approvals include* Eaton Vickers ISO 15380: HEES VDMA HEES JCMAS P044 (endurance test) Temperature, o C Shell Naturelle Fluid HF-E is suitable for hydraulic and fluid power transmission systems in exposed environments where there can be wide variations in temperature. Shell Naturelle Fluid HF-E is blended from synthetic base stocks with a naturally high VI of The absence of viscosity modifier additives means the fluid is shear stable (i.e., there is no loss of viscosity control under high shear operating conditions) and offers multigrade performance with no loss of VI during use. The viscosity temperature curve is much flatter than that of conventional hydraulic fluids.

4 SHELL NATURELLE S4 GEAR FLUID 68, 100 AND 150 DESIGNED TO OFFER PROTECTION FOR GEARS IN THRUSTERS, PROPULSION DRIVES AND OTHER APPLICATIONS: OUR SPECIAL-PURPOSE BIODEGRADABLE, SYNTHETIC GEAR AND BEARING FLUIDS Prematurely worn components can mean additional maintenance costs and reduced equipment availability. Shell Naturelle S4 Gear Fluid can help to lower maintenance costs by offering outstanding anti-wear and load-carrying performance through their high-quality, synthetic ester base fluid and advanced non-toxic anti-wear additives. CUTTING OPERATING COSTS If water and air contaminate your oil, its ability to reduce friction and keep your gears working efficiently may be compromised. Shell Naturelle S4 Gear Fluids help to cut operating costs by maintaining system efficiency through their excellent waterseparating, load-carrying and anti-wear characteristics. Shell Naturelle S4 Gear Fluid meets industry standard DIN 51517/3 CLP-E, including full water separation in less than 30 minutes according to DIN ISO LONGER SERVICE LIFE Fully saturated esters ensure excellent resistance to oxidation and hydrolysis while offering high-temperature thermal stability. Shell Naturelle S4 Gear Fluid offers the potential to extend oil service life compared with conventional mineral gear oils. LOAD CARRYING AND WEAR PROTECTION Shell Naturelle S4 Gear Fluid is formulated to have excellent loadcarrying capacity and anti-scuffing performance. Advanced non-toxic additives provide protection over a wide range of conditions and ensure long component life, even under shock-loading conditions. All Shell Naturelle S4 Gear Fluid grades pass the FZG load test above load stage 13 according to ISO A20. Environmentally considerate EU Eco Labelled Independently certified as VGP compliant. APPLICATIONS Shell Naturelle S4 Gear Fluid is suitable for gears and bearings in vessel propulsion drives, thrusters and controllable pitch propellers, and is available in ISO viscosity grades 68, 100 and 150. Approvals from leading thruster manufacturers include* Kawasaki Heavy Industries Nakashima Propellor Holland Roerpropellor (ZF). Approvals from leading stern tube and seal manufacturers include* SKF Blohm + Voss Industries Wärtsilä Propulsion IHC Sealing Solutions Aegir-Marine. Approved for use in Sperry Marine for fin stabilisers Caterpillar (Berg) controllable-pitch propellers Ortlinghaus wet marine clutches. IT IS WELL-KNOWN THAT FREE WATER IN LUBRICATING OIL DECREASES THE LIFE OF ROLLING ELEMENT BEARINGS FROM 10 TO MORE THAN 100 TIMES. SKF Taken from SKF: SKF has been a leading global technology provider since 1907

5 SHELL NATURELLE S2 WIRE ROPE LUBRICANT A EFFECTIVE EXTREME-PRESSURE PROTECTION FOR WIRE ROPES, CABLES, PLAIN BEARINGS AND GENERAL DECK MACHINERY OPERATING IN CHALLENGING MARINE ENVIRONMENTS FROM OUR ADVANCED BIODEGRADABLE LUBRICANT Lubricants with poor resistance to water wash-off may fail to protect your equipment, which means there is an increased likelihood of additional costs through unplanned maintenance or equipment downtime. Shell Naturelle S2 Wire Rope Lubricant A is designed for wire ropes, open gears and other deck equipment. It has excellent adhesion properties and is formulated with a selected blend of additives to offer superior extreme-pressure and anticorrosion protection in the most challenging of environments. CUTTING OPERATING COSTS Low-cost lubricants can be poor value if they fail to stay where you need them. Shell Naturelle S2 Wire Rope Lubricant A offers high resistance to water wash-off owing to its outstanding adhesion properties. This can help to cut product consumption and labour costs, thereby reducing the cost of keeping your mooring and crane wires protected and working efficiently. ADHESION TEST 1: SPRAY CABINET <5% 25% 100 TEST 2: HEATED PLATE TEST Grease lost during test, % Shell Naturelle Competitor s EAL Shell Naturelle Competitor s EAL 3 g of grease is spread across a test plate and then jetted with water at 38 C at a pressure of 40 psi for 5 minutes. Shell Naturelle Wire Rope Lubricant A = <5% loss Competitor s environmentally acceptable lubricant (EAL) = 25% loss A small sample of grease is placed on a metal test plate, which is then hung vertically. The grease is subjected to a temperature of 70 C and its movement is monitored. The Shell Naturelle S2 Wire Rope Lubricant A has not moved, changed shape, lost any of its colour or stained the plate. SHELL NATURELLE S5 GREASE V120P 2 EXTREME PRESSURE AND ANTI-WEAR Specially selected solid lubricants and additives protect components from excessive wear, even under heavy loads. EXCELLENT CORROSION PROTECTION Shell Naturelle S2 Wire Rope Lubricant A is formulated to include special anti-corrosion additives to offer enhanced protection from corrosion, even under the influence of seawater. In an SKF EMCOR test for a period of one week, there was no sign of corrosion. READILY BIODEGRADABLE Shell Naturelle S2 Wire Rope Lubricant A achieves the OECD 301 F requirement of >60% degradation within 28 days and is made from >60% renewable raw materials classed as minimally toxic and non bioaccumulative. APPLICATIONS Shell Naturelle S2 Wire Rope A Lubricant is designed for use on wire ropes and open gears. It can also be used on other applications such as crane and davit wires, rudder stocks, propeller caps and dredger bucket wheels. Shell Naturelle S5 Grease V120P 2 is a biodegradable grease for use in rudder bearings; applications such as slowspeed plain bearings (slower than 500 rpm) and high-speed ball and roller bearings (up to 2,000 rpm) that require an extreme-pressure grease; and in routine greasing of deck equipment. The grease is based on a lithium hydroxystearate soap thickener and is fortified with extreme-pressure, anti-oxidant, anti-wear and anti-rust additives. Fully biodegradable to the latest CEC-L-33-A-93 standard Provides resistance to the formation of deposits caused by oxidation at high operating temperatures and maintains consistency, thereby reducing leakage Offers good corrosion resistance characteristics to offer effective protection in challenging environments. Approvals from leading marine manufacturers include* Becker Marine Systems (full approval for rudder carriers) Rolls-Royce (full approval for rudder carriers).

6 CHANGE OVER TO THE SHELL NATURELLE PRODUCT RANGE To change to our range of biodegradable lubricants, the entire process must be carefully managed. A detailed changeover guide can be obtained from your local Shell Marine technical services team. The team is available to provide you with the necessary advice to help to guide you through the changeover process and also to help you achieve the best performance from Shell Naturelle products while ensuring minimal waste throughout the process. As part of its international offering, Shell Marine Products offers the following range of branded technical services: Shell LubeAdvisor Technical support services, lubrication surveys and audits, storage and handling advice Shell LubeExpert Specialist on-site critical application support and inspections by application, marine and product experts Shell Lube Monitor Cylinder condition monitoring Shell Rapid Lubricants Analysis Laboratory oil condition monitoring tools service Shell Rapid Lubricants Onboard Plus and Shell Rapid Lubricants Onboard Alert Onboard oil condition monitoring tools. *The information and guidance offered for use of Shell Naturelle products is based on experience and understanding gained through the development and manufacturing of lubricants. The performance of the products can be influenced by a number of variables, not limited to, contamination, operating temperature, equipment application, external environment and material type. The suitability of Shell Naturelle products must be checked for all applications with original equipment manufacturers (OEM) or with Shell technical representatives before these products are used. It is important to check that the fluid has the necessary OEM approval for the specific make and model of equipment and to check that the materials used for seals, flexible hoses, O-rings and tank coatings are also compatible with the Shell Naturelle products that are to be used. Please contact your Shell technical manager for the complete list of approvals. CONTACT US To find out more about our range of marine fluids for operations in environmentally sensitive areas, please contact your local Shell representative or to Visit Shell International Petroleum Company Limited All rights reserved. Issued August 2014