ski lift wire rope manufacturer

Wirerope Works, Inc. manufactures Bethlehem Wire Rope®, the trade name under which we produce, sell and service our wire rope and strand products. The name "Bethlehem Wire Rope" represents the most complete facility and experienced personnel in North America. Our 46-acre manufacturing complex in Williamsport, Pennsylvania, with over 620,000 square feet under roof, is the single largest wire rope manufacturing facility in North America. Wirerope Works, Inc. manufactures its own wire, wire rope, structural strand, and all fabricated products such as pendants and other assemblies on the same premises.

Bethlehem brand wire rope and strand products have long been recognized worldwide for superior quality. Used for both lifting and stabilizing, Bethlehem Wire Rope products are used in a wide variety of applications ranging from crane and elevator hoist ropes to bridge suspension and anchoring offshore platforms. Wirerope Works, Inc. serves many industries including construction, logging, marine, mining, oil and gas, and steel.

The 6x19 Classification of wire rope is the most widely used. With its good combination of flexibility and wear resistance, rope in this class can be suited to the specific needs of diverse kinds of machinery and equipment. The 6x19 Seale construction, with its large outer wires, provides great ruggedness and resistance to abrasion and crushing. However, its resistance to fatigue is somewhat less than that offered by a 6x25 construction. The 6x25 possesses the best combination of flexibility and wear resistance in the 6x19 Class due to the filler wires providing support and imparting stability to the strand. The 6x26 Warrington Seale construction has a high resistance to crushing. This construction is a good choice where the end user needs the wear resistance of a 6x19 Class Rope and the flexibility midway between a 6x19 Class and 6x37 Class rope.

The 6x36 Class of wire rope is characterized by the relatively large number of wires used in each strand. Ropes of this class are among the most flexible available due to the greater number of wires per strand, however their resistance to abrasion is less than ropes in the 6x19 Class. The designation 6x36 is only nominal, as in the case with the 6x19 Class. Improvements in wire rope design, as well as changing machine designs, have resulted in the use of strands with widely varying numbers of wires and a smaller number of available constructions. Typical 6x37 Class constructions include 6x33 for diameters under 1/2", 6x36 Warrington Seale (the most common 6x37 Class construction) offered in diameters 1/2" through 1-5/8", and 6x49 Filler Wire Seale over 1-3/4" diameter.

Isn’t this the dream of every ardent skier: wedeling downhill merrily and then being taken uphill again within minutes in comfort and at ease by a ropeway or gondola?

Year after year, ski lift and/or ropeway operators are faced with this challenge: to take any number of winter and summer tourists from the valley up the mountain, safely and quickly. And not only in the mountains but in the cities, too, passenger ropeways play an increasing role in the daily transport of great numbers of people. To ensure that transportation is effected safely and fast, not only the appropriate lift systems are required, but also reliable ropeway ropes for passenger ropeways. And these very ropes for ropeways are one of the specialities of Teufelberger-Redaelli.

Our vast experience in steel wire rope manufacturing gained over two generations helps us create optimized products for all fields of use in the passenger ropeway segment.

Our high-performance steel wire ropes for passenger ropeways are developed and produced at two locations in Austria and two in Italy. We produce advanced steel wire ropes for the most spectacular ropeway projects all over the world. Our focus is set on the high requirements in terms of the rope’s service life as well as smooth running behaviour, which we meet through our special rope constructions and production technologies.

With our pioneering rope technologies such as SOLITEC® and SUPEFILL®, we can guarantee long maintenance intervals and thus less downtime, which constitutes a key factor for the success of a ropeway operator.

Our carrying ropes often do their duty throughout the entire lifetime of the ropeway system – and that with great reliability, low maintenance requirements, and the utmost riding comfort.

The provision of high performance steel wire ropes for your passenger ropeway custom-tailored to your specific needs is a fundamental prerequisite for a lasting and successful business relationship. However, TEUFELBERGER also provides additional services that render the construction or upkeep of your ropeway system significantly easier.

No matter which kind of ropeway you operate, we have the right rope for you in our product portfolio. Whether you need a rope for a funicular railway, a Funitel/Funitor, a bicable or tricable ropeway, a reversible aerial ropeway, a gondola ropeway, a chairlift or a surface lift, we have the appropriate hauling ropes, carrying ropes, tensioning ropes, as well as carrying-hauling ropes.

Wire rope is a complex mechanical device that has many moving parts all working in tandem to help support and move an object or load. Wire ropes are attached to a crane or hoist and are fitted with swivels, shackles or hooks. These are suitable for lifting or lowering elevators and are also used for supporting suspension bridges or towers.

In this article, we"ll cover details on the top U.S. providers of wire ropes, along with our featured list of top wire rope suppliers on Thomasnet.com.

Below is a list of featured suppliers of wire rope from our platform. Included with these companies is their location, year established and the number of employees.

Below we have assembled information on the top suppliers of wire rope in the U.S. based on currently available public sales data. The table also includes the company name, location and the number of employees.

With the help of the provided details on the wire rope suppliers in the United States in the above tables and descriptions, we hope you can use this data to further aid your sourcing decisions.

ISO 9001 & AS 9120 certified 8(m)WOSB certified manufacturer of floatable polypropylene ropes for barrier, crowd control, ski tow and slope, and electrical applications. Available in 3-strand twisted and 8-strand plaited construction with 3/16 to 4 1/2 in. diameter sizes and 1,300 to 115,000 lbs. average tensile strength. Features chemical resistance. Also offers custom ropes. Meets military specifications.

Our structural ropes are produced and assembled in accordance with the EU harmonization directives and are certified with CE approval. The CE certification guarantees that the marked products can be traded in the EU without restrictions. Fatzer guarantees that all requirements necessary for CE approval have been met in accordance with the relevant directives.

Bekaert offers a wide range of coated round and Z-shaped steel wires for the production of hauling and carrier ropes. The wires that make up the rope core are of consistent quality. They feature high tensile strength and excellent ductility, leading to optimal fatigue resistance and a high breaking load. Moreover the round and Z-shaped wires can be coated with advanced coatings ( Bezinal®, Bezinal®3000 ). The combination of these features provides the right requirements for any traction or track rope: safety, stability, sustainability and less maintenance.

Because cable way projects mean a significant investment, we help you manage costs with economical and streamlined production. Bekaert offers Just-In-Time delivery that keeps up with the planning of your projects. Our cable way rope wire is produced according to EN-10264-2 or EN-10264-3 specifications. You can also set specific mechanical requirements to customize your rope.

Knight Equipment Company, Inc. was founded in 1945 by Aubrey Knight, after working for Broderick & Bascom Rope Company since 1927. His son, R.J. Knight, worked along side his father until, in December 1975, he purchased and incorporated the business from his father. Knight Equipment Company, Inc. continues under that leadership today.

Knight Equipment Company has had a continued growth, not only in the wire rope field, but in the ski industry as well. RJ, along with his sons, Justin and Jason, does splicing, inspections, and electromagnetic inspections at the ski areas, nationwide, as well as worldwide.

Some of the products carried by Knight Equipment Company, Inc. are wire rope, wire rope fittings, M.S. Slings and H.T. Slings, chain slings, chain fittings, and nylon slings. We also make wire rope and chain assemblies for construction.

We do custom wire rope splicing, such as the endless drive cables used by the Amusement Industry for their rides and endless cables used by the Ski Industry.

Design, ride comfort and environmental sustainability play an important role in today‘s requirements for ropeways. From the continuous ongoing developments and an innovative spirit, products from Leitner-Poma of America have been setting new standards for many years.

Highlander is pleased to be the North American sales and service representative for Redaelli Wire Ropes in the aerial tramway industry. Please click on the Redaelli logo for more information on Redaelli Wire Ropes. To contact Highlander for a quote on a new rope or wire rope service, or for more information, please go to our Contact page.

In late April 2022, the Lodgepole Chairlift haul rope (aka the wire cable that the chairlifts are attached to) was replaced with a brand-new haul rope supplied by Fatzer, LTD - a specialty steel wire rope manufacturer based in Switzerland. The process of replacing the haul rope is a complicated one, requiring an all-hands-on-deck approach from the resort’s summer maintenance staff, as well as expert outside consultants.

First the chairlift carriers - what skiers/riders sit on - must be removed. Then the old rope is detensioned and taken off a number of lift towers so it can be accessed. The new rope is then temporarily spliced into the old, and a special system is rigged on the ground to pull the new rope around all of the lift towers, using the old rope as a guide. Finally, the temporary splice is undone, and the new rope is permanently spliced together, rehung on the lift towers, and retensioned to its operating tension.

Extensive testing is conducted throughout the process and after to ensure the new rope is functioning properly before the chairlift carriers are reattached and the chairlift is fully load tested and certified as ready for passengers for next winter season.

i understand the factors at hand. just a little background info though.. the "cables" used for ski lifts start as wires that are twisted together to form a strand. then this strand, along with a number of other strands, is wound around a smaller wire rope (the core) to form the finished wire rope.

wire rope - cross section is made up of many of the honeycomb-looking strand cross sections and one core that is made up of many honeycomb cross sections

how exactly does varying all of those change the mechanical properties in a wire rope... i would think its a little more complicating that just the outer diameter of the finished product. especially since all of the sources ive looked at have said something about a range of wire numbers being used different types of strands, meaning there has to be some way of telling how many wires/strands you need at a certain thickness to provide the requested tensile properties

Over the years, IDM has become one of the specialists in cableworks, offering full service packages particularly appreciated by ski area managers as well as people working on touristic sites beyond the mountains.

Together, they embody since 10 years already a duo that is well reknown in the field of ropeways. They owe their fame to their responsiveness, their know-how and their respect for the customers exactings.

Daniel O"Connor & Sons Wire Rope and O"Connor Ski Lifts, Inc. is one of four companies across the country that make cable for ski lifts and perform safety inspections on them. The company also builds surface tows, rebuilds old lifts and markets conveyor belts, similar to moving sidewalks, for beginner areas.

The small company has just five employees who make the giant cables that hold up chairlifts and aerial trams. They also travel around the country and sometimes abroad to inspect installed lifts for safety, owner Daniel W. O"Connor said.

Having grown up in the business, O"Connor knows nearly everyone in the ski business and can talk about the state of the industry as well as telling plenty of stories about the people who run it.

His father, who worked for a wire company in Palmer, started the business part-time in the basement of their house in 1936, just when the first ski lifts came over from Europe.

While the business of wire cable hasn"t changed much, how it is being used has. At one time, nearly every town had a small rope tow on a hill where children used to learn to ski. Now, those are gone but most ski areas have far more lifts than they did in the past.

The technology used to examine the rope has improved. In the past, inspectors could only examine the outside of the cables. Now, the company has an electromagnetic machine which can test the interior of the cable to see if there are broken wires inside. Once multiple wires start fraying, the entire cable begins to weaken, O"Connor said.

To capitalize on the non-skiers, a number of ski areas, including Berkshire East and Magic Mountain in Vermont as well as those in New York, New Jersey and Pennsylvania, installed slopes for sledding on inflatable round tubes. People are pulled to the top in a surface lift that looks a lot like a rope tow.

A lot of amusement parks are also buying the cable, which is typically thinner than those that hold chairlifts, for a variety of different rides, O"Connell said.

The company will also take down old chairlifts, refurbish them and sell them elsewhere. Zoos have been buying them because people want to ride above and get a better look at the wildlife, he said.

Recently, the company installed three chairlifts in Texas. The Omaha, Neb. Zoo managed to pay off a $600,000 investment in one in 14 months by charging $2 a ride, O"Connor said.

Still, his real interest remains the ski industry. O"Connor talks about his close friendship with the late James J. O"Connell, better known as Jimmy Joe, who owned Mount Tom in Holyoke. He laughs that his company and O"Connell"s, Daniel O"Connell Construction company in Holyoke, are frequently confused.

O"Connor has traveled internationally to ski as well as perform inspections and install lifts. Probably the most interesting place he has been is Columbia, where his company installed a gondola in the middle of an area known for drug trafficking.

There are different ways of creating wire ropes, and each produces a rope that offers unique stress and rotational qualities suited to specific tasks. For most tasks, the two primary types of rope in use are stranded and spiral wire ropes.

Stranded wire ropes—steel strands wound in one or more layers around a core made of synthetic material, a wire strand, or a wire rope—secure loads as wire rope slings or running ropes because, in addition to being stressed by tensile forces, they take stress by being bent over the items that they are securing.

The three types of spiral wire rope, steel strands wound in opposing helical layers to make them nearly non-rotating, offer their own positives and negatives. Open spiral wire rope, made only from round wires, is suited to lighter applications. The half- and full-locked variants have a round wire core surrounded by profile strands that protect the rope and keep it lubricated. Given these qualities, spiral ropes are generally used as stationary ropes and stay ropes as they are good with both static and fluctuating tensile stresses. Full-locked ropes also serve as track ropes for cable cars, ski-lifts, cranes, and similar machines as they experience an increase in their free-bending radius when the tensile force increases, decreasing the bending stresses on the rope. As the roller force increases, however, that tensile force, along with the free-bending radius of the rope, decreases.

CERTEX has a wide range of steel wire ropes. We offer all existing types and dimensions of steel wire ropes, from the simplest 7-wire stay ropes to the most advanced "rotation resistant" steel wire ropes in compact construction. We have the products you need – from rope for crane to ropes for ski lifts and industrial applications. The steel wire ropes come from well-known manufacturers, who have high quality products. The ropes are delivered in customized lengths and are available with casted, pressed or hand-spliced ​​end fittings.