u bolt for wire rope brands

Wire rope clips, sometimes referred to as u bolt clamps, u bolt clips, u clips, u clamps or cable clamps, are used to secure the loose end of a wire rope when forming an eye. Wire rope u clips have a u-bolt that is secured into a saddle by two nuts. Wire rope assemblies almost always require two, or more wire rope clamps to secure the wire rope properly. When using wire rope cable clamps to form an eye in a wire rope, the working load limit of the wire rope is reduced by about 20%.

Here at Tri-State Rigging Equipment we pride ourselves on providing only the highest quality wire rope clamps from only the most reputable manufacturers. We can provide you with any wire rope clip on the market so, if you are unable to find what you are looking for, or if you don’t know exactly what you need, call or email our sales team to speak with a rigging product specialist.

Wire rope cable clamps come in a variety of materials ranging from galvanized and zinc plated steel, to stainless steel. The two most important different types, however, are drop forged and malleable wire rope u bolt clips.

Drop forged wire rope clips are more heavy duty than malleable rope clips and can therefore be used for more heavy-duty rigging applications. In addition, they are galvanized with a heavy coating of zinc that resists the corrosion and abuse found in rugged work environments. Wire rope cable clamps of every type are not designed to be used in an overhead lift but drop forged wire rope u bolt clamps can be used to suspend an overhead load. This makes wire rope cable clamps ideal for use with:

Regarding the first question, if the load is being moved, wire rope clips are not to be used. If the load is being held in place, heavy-duty drop forged wire rope clips can be used. For the second question, if the load is near the ground, malleable wire rope clips may be used, as their lighter duty design is more than enough for the job. On the other hand, if the load is being suspended above the ground, heavier duty drop forged wire rope clamps must be used.

In the rigging and lifting industry there is a common saying that is used to remember the correct way to use wire rope u clips: “Never saddle a dead horse.” This means that the saddle of the u clamp should always be in contact with the live side of the wire rope rather than the dead side. The dead side of the wire rope is the side of the eye that has the cut end. The dead end is attached to the live end of the wire rope to form an eye and it is imperative that the saddle be on the live side of the wire rope.

Tri-State Rigging Equipment is a service provider and distributor for all wire rope cable clamps, and u bolt clips for rigging serving clients from coast to coast, Canada, Mexico and especially focused in the states of Missouri, Illinois, Indiana, Iowa, Kansas, Nebraska, Arkansas, Mississippi, Tennessee, Kentucky, South Carolina, Florida, and Oklahoma.

Custom manufacturer of U-bolt clips. Materials used include aluminum, brass, carbon and stainless steel, iron, magnesium, zinc, Monel®, Inconel®, Kovar®, silver, platinum, niobium, and tungsten. Offered in black oxide, chrome, nickel plated, phosphate, and galvanized finishes. Capabilities include lean manufacturing, Kaizen, 5S, medium to high volume production, heat treating, assembly, machining, stamping, forging, welding, grinding, anodizing, swaging, tapping and electroplating. Industries served include aerospace, automotive, building and construction, electrical, electronics, food and beverage, medical, marine, semiconductor and defense. Meets ASME, ASTM, ANSI, NAS, SAE, and Military Spec standards. CE certified. Emergency and rush services are available.

Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load, and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties, and material traceability, not addressed by ASME B30.26.

This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.

Welcome to U-Bolt-It where you will find a broad range of standard and custom made forged eye bolts, hex bolts, heavy hex (hexagon) nuts, nuts, washers, wire rope, wire rope clips, chain, fasteners, transport chains, drill bits, U-bolts, and lifting hardware. We can have custom manufactured bolts made to meet all your requirements and in all materials from low carbon steel, to stainless steel and exotic materials. We also have the ability to modify almost any existing bolt to your specifications. Let U-Bolt-It be both your standard and non-standard supplier.

Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 1/8” through 7/8” sizes, and 90% for sizes 1” through 3-1/2”.

Meets or exceeds all requirements of ASME B30.26 including identification, ductilit , design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

En la página del curso, se enumeran todas las lecciones junto con una indicación de su progreso. Puede hacer clic en una Lección para ir a ella y ver el Tema y la Prueba asociada. Alternativamente, también puede hacer clic en un Tema debajo de la Lección para ir directamente a un Tema. A medida que avance en el curso y complete cada tema, aparecerá un círculo verde junto al tema. Una vez que haya completado el tema y el cuestionario, la lección se completará y mostrará una marca de verificación verde. Este progreso se guarda en su cuenta de Crosby, puede abandonar el curso en cualquier momento y reanudarlo más tarde.

Drop forged wire rope clips are galvanized finished. These are not the cheap malleable clips found in hardware stores, but the original "Crosby™" Red U Bolt™.

National Hardware"s 1/8" Wire Rope Clamp is designed for forming an eye or loop on wire rope. Steel U-bolt and nuts provide maximum clamping strength against malleable iron saddle. Installs using included U-bolt and hex nuts. The perfect anchoring point for webbing or strap meeting torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Always follow requirements for number of clamps per loop according to wire rope thickness. Also known as a Wire Rope Clamp. National Hardware"s Lifespan Limited Lifetime Warranty.

National Hardware"s 1/8" Wire Rope Clamp is designed for forming an eye or loop on wire rope. Steel U-bolt and nuts provide maximum clamping strength against malleable iron saddle. Installs using included U-bolt and hex nuts. The perfect anchoring point for webbing or strap meeting torque value of Federal Specifications FF-C-450D, Type 1, Class 2. Always follow requirements for number of clamps per loop according to wire rope thickness. Also known as a Wire Rope Clamp. National Hardware"s Lifespan Limited Lifetime Warranty.