wire rope clips and thimbles made in china

Wire rope clips are widely used for making end terminations. Clips are available in two basic designs; the U-Bolt and fist grip. The efficiency of both types is the same.

When using U-Bolt clips, extreme care must be exercised to make certain that they are attached correctly; Incorrect installation can reduce the working load limit by 40%. Below are general guidelines for installing wire rope clips.

The saddle shall be placed on the live end of the wire rope, with the U-bolt on the dead-end side—Remember the well-known saying: “Never saddle a dead horse.” Use at least two or three wire rope clips to secure the ends properly to the length of the rope, and tighten nuts evenly one by one until reaching the recommended torque.

Step 1. Turn back a specified amount of rope from the thimble or loop. The first clip must be placed one bridge width from the turned back rope tailor dead end of the rope, Apply U-Bolt over dead end of wire rope – live end rests in the saddle (Never saddle a dead horse!) Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque.

Step 2. When more than two clips are required, apply the second clip as near the loop or thimble as possible, tighten the nuts firmly but not yet to the specified torque.

Step 3. When three or more clips are required, space additional clips equally between the first two – take up rope slack – tighten nuts on each U-Bolt evenly, alternating from one nut to the other until reaching recommended torque.

Step 4. Apply the first load to test the assembly. This load should be of equal or greater – weight than loads expected in use. Next, check and retighten nuts to recommended torque.

In accordance with good rigging and maintenance practices, the wire rope end termination should be inspected periodically for wear, abuse, and general adequacy. Periodically re-tightening of the nuts must be done at 10.000 cycles (heavy usage), 20.000 e.g. every 3 months, 6 months, annually.

Malleable clips are to be used for making eye termination assemblies only with the right regular lay wire rope and only for light-duty uses with small applied loads, such as handrails, fencing, guard rails, etc.

If you have any wire rope clips questions, you can contact us by email at info@hilifting.com. We will be glad to share with you more useful information.

wire rope clips and thimbles made in china

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

wire rope clips and thimbles made in china

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

wire rope clips and thimbles made in china

DIN741 wire rope clip is used on wire rope eye-loop connections or complete loops, end-to-end connections where socketing or splicing is not feasible or when a temporary joint is required. This model wire rope clip is mainly made of carbon steel, stainless steel, malleable iron, etc. Our company offers a wide range of DIN741 wire rope clips and we will try our best to satisfy all your needs. Please feel free to attact with us. We are looking forward to cooperating with you.

wire rope clips and thimbles made in china

Looking for a wood clamp or a bar clamp to level up your woodworking workshop and skills? Look no further! At Alibaba.com, you can browse an endless variety of wholesale wire rope clamps and find the perfect fit for you regardless of experience.

If you are looking to further your woodworking skills, woodworking clamps such as the spring clamps can be your next best investment! Head over to Alibaba.com to get your brand new wire rope clamps for your next pet project! Who knows, this purchase may be the catalyst to your future greatness!

You can even get a beam clamp to suspend or secure fixtures, wires, threaded rods, and other hardware to beam flanges. They offer secure fixing without the need for welding and drilling, making it the perfect purchase for your next DIY project! Find affordable cable clamps made with quality materials on Alibaba.com!

On the other hand, if you would prefer to work with drilling and welding for your pet projects, you may browse our massive selection of metal clamps and welding clamps. The metal clamps will provide a more durable option to the other wire rope clamps you can find on the market! Find the most suitable product for your needs and level of expertise today on Alibaba.com and get free shipping and further discounts on your purchase!

wire rope clips and thimbles made in china

The collection of we have is well received in multinational marketplace. We are the correct selection for made in china and rigging hardware,polyester webbing slings,polyester round slings,polyester cargo lashings,flat webbing slings,flat web slings,polester web sling,round sling,cargo lashing,ratchet tie down,ratchet lashing,tie down,cargo net,marine hardware,turnbuckles products in the economical rates. If you are looking for a renowned china rigging hardware,polyester webbing slings,polyester round slings,polyester cargo lashings,flat webbing slings,flat web slings,polester web sling,round sling,cargo lashing,ratchet tie down,ratchet lashing,tie down,cargo net,marine hardware,turnbuckles products manufacturer that has speciallized in hardware: hooks & mounts, then Our company is the ideal option. Our company is a well-known business in china that is exporting transnationally.

wire rope clips and thimbles made in china

U.S Type G411 wire rope thimbles or Extra G414 heavy duty thimbles that are made from Type AISI 304 or 316 Stainless Steel. Stainless steel thimbles are best suited for outdoor applications and are highly resistant to rust. Stainless Steel thimbles are also ideal for being used in or near saltwater environments where corrosion frequently occurs, and are the best choice when using stainless steel cable or lifting chains.

To speed installation, you can spread the thimble open slightly so it will pass over the ¼” thick wire of the large eye bolts and screw eyes. Make sure to close them after installation.

- When choosing an extra heavy duty wire rope thimble or light duty thimble for your application, it’s important to consider what type of environment the thimble will be used in.

Quality assurance and competitive price, professional service and experienced staff. We help select the ideal product you want, contact us directly via email sales101@titansuhe.com.

wire rope clips and thimbles made in china

* The breaking load is approximate, and will change depending on usage situation and environment. In addition, in the event test data is required, please make a separate request, and extra cost will be generated.

wire rope clips and thimbles made in china

APO/FPO, Afghanistan, Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan Republic, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, British Virgin Islands, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde Islands, Cayman Islands, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo, Democratic Republic of the, Congo, Republic of the, Cook Islands, Costa Rica, Croatia, Republic of, Cyprus, Czech Republic, Côte d"Ivoire (Ivory Coast), Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Islas Malvinas), Fiji, Finland, France, French Guiana, French Polynesia, Gabon Republic, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, Korea, South, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macau, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, Netherlands Antilles, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Reunion, Romania, Russian Federation, Rwanda, Saint Helena, Saint Kitts-Nevis, Saint Lucia, Saint Pierre and Miquelon, Saint Vincent and the Grenadines, San Marino, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, Spain, Sri Lanka, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, Uzbekistan, Vanuatu, Vatican City State, Venezuela, Vietnam, Virgin Islands (U.S.), Wallis and Futuna, Western Sahara, Western Samoa, Yemen, Zambia, Zimbabwe

wire rope clips and thimbles made in china

Acknowledged as one of the leading wire rope thimbles manufacturers and suppliers in China, Toho-Rongkee now bring you the newest wire rope thimbles made in China which low in price and high in quality. Offering you the wholesale service and the OEM service, we warmly welcome you to buy the cheap TOHO wire rope thimbles with CE certification in stock from our factory. We will also offer you a discount and the free sample.

wire rope clips and thimbles made in china

As one of the most professional wire rope clip manufacturers and suppliers in China, we"re featured by quality products and good service. Please rest assured to wholesale customized wire rope clip at competitive price from our factory. Din 1480 Turnbuckles with Stub Ends, Auto Accessories, Din 1480 Eye/Eye

wire rope clips and thimbles made in china

Thimbles are perfect for wire ropes terminating in a loop and are one of the most commonly used end fittings for steel cable.They are used to help protect the steel wire-rope which forms the eye,and therefore will greatly extend the working life of the rope,they also add extra rigidity to a soft loop making it stronger and much easier to attach wherever it is needed.

Our products are manufactured in strict accordance with national and international standards, and we test each product before delivery. If you would like to view our quality certification and various test reports, please ask us.

2. How about price?We are a factory and be able to give you lowest price. Please trust the quotation we would give you, it is professional one.3. Why should you chose us?Chose happens because of quality, then price, We can give you both. Additionally, we can also offer professional products inquiry, products knowledge train(for agents), smooth goods delivery, excellent customer solution proposals.4. How to ensure the interests of buyers?Our company supports Alibaba online trading, which not only ensures the safety of the buyer"s funds, but also guarantees the quality of the goods. From the outbound, to the loading, and finally to the receiving, the whole process is transparent.5. How to guarantee delivery time?We are a factory with a large inventory of stock, which guarantees that the goods will be shipped within the fastest day from the date of signing the contract.6. How to get samples?We can provide samples for buyer"s testing free of charge, but buyers need to pay for shipping costs.

wire rope clips and thimbles made in china

US based company with manufacturing in US and China. ISO 9001:9002, ISO 9001:2000 & ISO/TS 16949 certified manufacturer & distributor of rigging hardware including load binders, anchor & chain shackles, and wire rope thimbles. Products are available in different sizes. Capabilities include aluminum die casting, investment casting, iron sand casting, steel forging, sheet metal stamping and forming, plastic injection molding and aluminum extrusion. Services include CAD model development, stress analysis, mechanical & chemical lab tests & prototyping service. Local US customer service handles project from beginning to end.