wire rope for railings quotation

* Price ranges reflect average pricing based on intermediate customization choices and finishes, not including sales tax or shipping costs. Some projects may be subject to higher rates. It is possible to purchase railing systems for less than the lowest price in the range based on customization and finishing choices.

Cable railing can use both metal and wood posts. Wood cable railing systems can use pre-existing or purchased wooden posts, which can make this a budget-friendly cable railing option. Products like our cable railing kits – Drivetite allows you to drill into your wooden posts and tension runs of cable to form the cable railing system. Using our cable railing kits for wood posts to create Wood Cable Railing (without purchasing posts) will cost about $10-12 per linear foot before kit cost.

Viewrail custom makes every post for your individual project. These posts come pre-cut, pre-drilled, and ready to install. Viewrail designs posts to be sleek. Their hardware is hidden, and the weld seams are covered. Each post can be powder coated and finished to achieve your ideal look.

Using aluminum for your cable railing system will cost about $150-240 per linear foot, which is about 30% less than using stainless steel posts. Our DIY cable railing system (Express Cable Railing) uses aluminum cable railing posts making it a great way to save money when your project doesn’t require the extra strength and security that comes with stainless steel. Plus, aluminum cable railing posts are suitable for indoor and outdoor* use.

Using stainless steel on your cable railing system will give your railing extra strength and durability. It will cost $215-285 per linear foot, depending on the grade of your stainless steel. Viewrail offers 304 stainless steel and 2205 duplex stainless steel posts. 304 stainless steel is a great option for outdoor projects that are not near the water. 2205 duplex stainless steel posts are ideal for the toughest environments. This is the same material that is used on deep sea oil rigs, high-traffic tourist areas, and other saltwater locations. Stainless steel cable railing posts will cost about $150 per post for 304 Stainless Steel, and $200 per post for 2205 Duplex Stainless Steel

A general rule of thumb for planning out the cost of your cable railing project is that corners add cost. If cable simply runs through a post, it will cost less than a cornerpost which holds the tension for each line of cable. Since corner posts tension the runs of cable, they require cable railing hardware which will increase your total railing cost. Check out the glass railing cost guide for a comparison between cable and glass railing.

Stainless steel cable rolls at wholesale prices now available at Stainless Cable Railing. We design, manufacture and ship modular (easy for the do-it-yourself-er) aluminum and stainless steel handrail systems that complimented with stainless steel cable rail wire rope. Our staff has helped with every deck system type imaginable. From cedar decks, composite decks, even on bare sidewalk. Oh, lets not forget about indoor and out door stair systems. Each one of our staff members are highly trained in designing a stainless steel cable hand railing system and helps with the design process for each individual deck system. With our explosive growth from last year we have to import an enormous amount of stainless steel cable from our sources overseas.

With this large ordering power, Stainless Cable Railing receives very favorable pricing and are now extending the savings to our customers. Wholesale pricing for 316 marine grade stainless steel cable railing wire is now available to the public in 1000" rolls. Prices as low as $.39 a lf.

Our 1x19 stranded stainless steel cable has 19 individual wires twisted together while the 7x7 stainless steel cable has 7 bundles of 7 separate cable wire twisted into a bundle to form a very strong and solid stainless steel cable. The 316 marine grade stainless steel cable insures not to rust in harsh weather conditions like the salty ocean breezes.

Note: Stainless Steel is highly resistant, but not impervious to the elements, and requires minimal maintenance for ideal results. We recommend applying Citrisurf 77 Plus to all exposed stainless steel components at the time of installation. In addition, apply Rust Rescue if within 10 miles of a marine environment to further protect the stainless steel. Learn more about these products and general stainless steel care on our Cleaning & Maintenance Page.

The cost of cable railing installed by a contractor is $60 to $165 per linear foot based on the materials used for posts, the number of cable rails and the complexity of the deck itself.

The average cost of cable railing professionally installed is about $135 per linear foot. The breakdown is roughly $100 per foot for the most common materials and $30 per foot for installation labor, which includes installing the materials and getting the permit. If old railing is removed and disposed of by the contractor, additional costs will come into play.

Cable railing gives any deck a contemporary profile with minimal obstruction. But it comes at a higher price than most other options like aluminum or similar like metal and cast iron railings. The cost of cable deck railing is only exceeded by glass railing prices.

This cable railing price guide discusses cost factors to help you consider which materials fit your budget. A list of retail costs and a comparison of cable railing price based on what materials are used for posts and rails. Composite railings are a very popular choice and keep the modern look and appeal, when matched with cable runners. There’s a place for homeowners to submit their costs providing real-life prices for other readers. Consider bookmarking this page of Costimates and return to share your project prices with others.

Cost estimates for cable deck railing vary widely, and most sites underestimate price. Deck Cost Guide pegs the price at $40-$60 per linear foot, but you’d have to use the cheapest materials and install them yourself into existing posts to get close to that cost. Even Home Advisor, a typically reliable site, offers a narrow cost range of $60 to $135, definitely on the low side of what homeowners are paying for cable deck rail systems.

Many homeowners install cable into existing wood posts when refurbishing or repairing an old deck. Whether you’re repairing an existing deck or constructing a new one, here are cable railing cost comparisons for materials.

$60 – $90 per linear foot | Aluminum Cable Railing Kits – they are an affordable choice for homeowners willing to assemble them. DesignRail kits by Feeney are a popular example.

$30 – $150 | A permit including an inspection is required for any deck with a railing. Deck size and where you live determines exact cost of the deck permit.

Here’s what DIY cable deck railing installation will save you. The low end is for decks with predrilled wood and metal posts, while time/costs go up if wood posts must be drilled onsite.

Below we have a simple form to fill out that will give us a good indication of how to best quote you a cable rigging price.  It is in a PDF and, if supported by your browser, it will allow you to fill out the necessary information on the website. Simply fill out the information, save the file to your computer, and email it to us. You may also print the PDF and send it via email.

One of the main questions most people have is: What type of fittings do I need? Click here to see the most common Cable Rail Hardware with information about how they can be used.

Although we do not build wood frames, if you are having a wood frame built for your deck with our cables installed, please Click here for a suggested wood frame layout that has proven successful for past installations.

Our website uses cookies. For more information on our cookie use, see our Privacy Policy. By continuing to use this website you agree to our use of these cookies. Accept

Used as both interior and exterior barriers and fall protection systems, cable railings are commonly made of durable and weather resistant materials such as stainless steel. This results in low maintenance railing with a sleek and elegant look.

While the appearance of rails may be important to decorative and personal use railings, workplace cable railing is much more restricted. Such systems must comply with regulations established by the U.S. Occupational Safety and Health Administration (OSHA). This organization stipulates that railings must be able to support 200 pounds, be set 3 inches from the wall and stand 30 to 37 inches from the ground with a mid-rail. Many residential applications comply with these structural specifications as a matter of convenience and structural integrity.

There are several basic components applied in the design of a cable railing system. The cable itself has three main elements known as filaments, strands, and cores. Filaments are cold drawn rods of metal materials of varying diameters. These wires are then twisted or braided together to form what are known as strands. Each strand may contain as few as two strands or several dozen. Variable numbers of these strands are then wrapped around the third and final component, the core. Cores can be fibrous or made of wire as well, depending upon the application.

The overall diameter of the cables for railing may be as small as 1/8 of an inch or may reach considerable size. The larger the diameter the more rigid, but also more expensive the cable rail will be.

The framework used with stranded wire railing must be very rigid due to the force applied by tensioning the cable. The cable tension prevents deflection and can yield great amounts of stress which are placed on the posts. Intermediate posts are placed at varying intervals throughout the railing system to relieve some of the burden from the end posts.

The 9020 Grab Rail system is constructed with the same aircraft grade 6063-T6 aluminum alloy as the primary railing system. We have developed a clean and sleek set of accessory components to allow for easy field attachement; including seemless splice connections for long runs and rotating angle mounting brackets.

The Latitude Cable Railing System with wood (customer supplied) handrail is comprised of mechanical swage tensioners to allow for cable railing infill.

The Spectrum Cable Railing System is a customer favorite featuring 1 ½ x 1 ½ inch post made of heavy gauge stainless steel and powder coated for maximum durability.

Atlantis Rail offers a complete line of stainless steel cable railing systems. This innovative collection of low maintenance railings offers unobstructed views capable of fitting any indoor or outdoor, commercial or residential design. Our railing systems have been designed for assembly using a collection of patented railing fittings and components to allow for the delivery of turn key stainless steel railing systems at a low cost. Atlantis Rail designs and manufactures stainless steel railing systems to client specifications, making it ideal for all applications by offering a complete line of deck railing systems and components to suit every need.

The Spectrum Cable Railing System is a customer favorite featuring 1 ½ x 1 ½ inch post made of heavy gauge stainless steel and powder coated for maximum durability.

Cable railings (also known as cable railing systems and wire rope railings) are a low maintenance alternative to traditional wood or metal railings. Quite simply, they are guard rails and hand rails that use horizontal cables in place of traditional spindles, glass, mesh, etc. for infill.

Stainless steel is a relatively new material compared to copper, steel and other commonly used metals so there are some misunderstandings regarding the material. The practice of making good stainless steel is not simple, but understanding the elements that make good stainless steel is fairly straight forward.

Enter to win in our Atlantis Rail Systems photo contest, view our Cable Railing “How-To” page, explore our featured products or visit our blog for Atlantis news and upcoming events, as well as, tips and tricks on cable railing installation, maintenance, care and more! You may also find valuable information by visiting our YouTube Channel!

How to install Cable Railing the RailEasy™ way! Let us help guide you through the proper design and installation of the RailEasy™ Cable Railing System.

Looking for railing for your home that will keep your view unobstructed? Consider cable railing. Learn why cable railing is a great option and investment.

A Cable Railing System (also known as cable railing systems and wire rope railings) can be composed of a variety of materials including wood, metal, and some plastics or composite materials. These wood, metal, and plastics or composite materials are often mixed in a design to create a hybrid system that is like no other. Cable Railing is a unique railing design in it of itself, but combined with a little imagination it truly becomes one of a kind. No matter which variation of material you choose to use, the frames need to be rigid enough to support without deflection against the combined pull of several rows of cable. The railing cable must be installed at distances of 3 inches apart with posts no more than 4 feet apart to prevent a 4 inch sphere from passing through the cable railing.

We offer Designer Stainless Steel Railings that are elegant and have a long service life. These are manufactured using high grade raw material that is well tested and verified in or in-house quality testing unitread more...

Being one of the reputed organizations in the market, we are engaged in offering an exclusive array of Stainless Steel Marvel Railings. Our offered products are designed using top class stainless steel and advanced technology under the guidance of our skilled personnel. These products are tested on well-defined parameters ofread more...

Copyright © 2014 D&A Wire Rope | 3400 E Cesar Chavez St Austin, Texas 78702 | 512.385.6190 | sales@dawirerope.com| Open M-Th 7a-5p, F 7a - 4:30p

Ultra-tec stainless steel cable railing products are an excellent choice for a variety of commercial designs, offering unobstructed views and a spacious appearance. The most common use of cable railings in designs today are horizontally run cable railing system for interior and exterior applications.

The use of cable railings for commercial projects offer architects and designers flexibility, versatility, and a modern approach to any design. Cable railings also allow a creative and easy to install alternative for fabricators and installers. In addition to design and creativity, there are key design considerations for a successful cable railing system installation.

Cable, also referred to as wire rope or aircraft cable, is very strong in tensile strength and is designed to be flexible. The degree of flexibility varies depending on the cable’s diameter and construction (1×19, 7×7, 7×19, etc.), the tradeoff for flexibility is strength, and the opposite is also true.

For commercial projects or anywhere there is heavy pedestrian traffic, we recommend a 3/16-inch diameter cable (316-grade stainless steel). It is most commonly used and is durable, low-maintenance, and is attractive. For a variable aesthetic option, other diameters are available from 1/8-, 1/4-, 5/16-, and 3/8-inches.

Other factors include the tension — to at least 225 pounds — of the cable, the span between supporting intermediate members, the cable’s diameter, the vertical spacing of the cables on center, and temperature at the time of installation. Temperature fluctuations can cause variations in cable tension due to differing thermal expansion of the railing frame and the cable. Depending on geographic locations, cable railings installed outdoors may experience large swings in temperatures; hot summer days to the cold winter nights may be a 140-degree difference.

Mounting and tensioning hardware is attached to end posts and work together to minimize the deflection. Posts must not deflect perceptively as the cables are tensioned to a minimum of 225 pounds at heights of 36- to 42-inches. It is crucial to minimize end post deflection, and potential bending, as an incredible amount of force is placed on the end post with ten or more lines.

A sturdy top rail is required to support the tensioning end posts and prevent bending under the strain of the tensioned cables. The most commonly used top rail for commercial use is stainless steel due to its resistance to corrosion and low maintenance.

Vertical cable railings — cables run from the top rail to the bottom rail — are becoming increasingly popular to differentiate a project for either interior or exterior use. The building code requirements apply to vertical cable railings; however, the installation of vertical railings differ.

Framing material — pipe, or structural square or rectangular tube framing (stainless steel for exterior use) — with a minimum wall thickness of ¼-inch is ideal. Cable braces are appropriate for replacing every eight cables to keep the top and bottom rails from bending when the cables are tensioned.

Stainless steel cable railings and fittings offer a beautiful, low maintenance option to enhance interior and exterior designs. Ultra-tec products also contribute to LEED® credits benefiting architects, designers, and building owners to achieve required building certifications.