wire rope lubricant specification price

Proper lubrication of your wire rope, chain and cable can safely extend its operational life regardless of application. Cranes, elevators, shovels, drilling rigs, suspension bridges and draglines are some of the many applications that use wire rope, chain or cable to perform work such as pulling, dragging or hoisting. These applications often are exposed to harsh environmental conditions, including extreme weather. Lubrication Engineers can help your wire rope, chain and cable last longer and operate safely by implementing a lubricant reliability program and recommending the right lubricants for the job.

Most wire ropes are lubricated during the manufacturing process, but this lubricant will not last the entire life of the rope. When looking for a lubricant to relubricate your wire rope, choose one that contains no acids or alkalis, possesses the adhesive strength to stay on the rope, can penetrate between wires and strands, has high fluid film strength, resists oxidation and remains pliable. It is important to remember that most wire ropes fail from the inside out. Corroded rope can be a safety hazard, as there is no way to determine its remaining strength and life. Proper lubrication will help prevent deterioration of wire rope due to rust and corrosion.

Because most wire ropes fail from the inside, it is critical to ensure the center core receives sufficient lubricant. LE recommends a combined regimen in which a penetrating lubricant is used to saturate the core, followed by a coating lubricant to seal and protect the outer surface. LE offers several penetrating and coating type wire rope lubricants to suit your specific needs.

Penetrating lubricants contain an evaporative solvent that facilitates migration of the lubricant into the core of the wire rope, then evaporates, leaving behind a heavy lubricating film that protects and lubricates each strand.

Wirelife Almasol Coating Grease (451-453) is a soft, semifluid calcium-based grease designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts, seal out damaging moisture, protect against premature wear and shield metal against corrosive attack.

Typical Applications: Wire rope, chain links, pins, bushings, cable sheave bushings, cables, open and closed silent and roller chains, and small, slow-turning gearboxes that require a semifluid lubricant

Wirelife Almasol Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wirelife Monolec Penetrating Lubricant, maximum protection and wear reduction is achieved.

Wirelife Almasol Syn Coating Lubricant (2022) is an extremely tacky, nonasphaltic synthetic lubricant with exceptionally high film strength. Perfect for extreme environments and conditions, it is the ultimate outer surface protector for wire rope and cable and comes from the same advanced technology that LE developed to protect large open gears in the mining and quarry industries. It derives its high load-carrying capacity from its synergistic blend of an extreme pressure additive and Almasol, LE’s exclusive wear-reducing additive.

Wirelife Monolec Penetrating Lubricant (2001) has excellent corrosion resistance and high load-carrying (EP) properties. It penetrates to the core of wire ropes, whether they are running or stationary. It is also excellent as a penetrating lubricant for chains of all sizes and works well in a variety of other industrial applications. When used in conjunction with Wirelife Almasol Coating Lubricant, maximum protection and wear reduction is achieved.

It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a film of heavy-bodied lubricant that protects and lubricates each strand and resists leakage from the wire rope core. Available in bulk sizes or in an aerosol version.

Typical Applications: All stationary or moving wire ropes or cables under heavy loads; chains of all sizes; mining and construction applications such as standing and running lines, draglines, cranes and derricks; marine applications such as cranes, hoists and drilling rigs; any other application that requires excellent rust protection for steel parts.

Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE’s Wirelife Low Tox Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.

Earthwise EAL Wire Rope Grease (3353) is recommended for use in applications on or near the waterways. It is an EAL and meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms. It is a soft, semifluid formulation designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its semi-tacky, water-resistant characteristics enable it to adhere to the application and seal out damaging moisture and protect against rust formation.

Typical Applications: Applications near or around waterways including: Wire rope; chain links, pins and bushings; cable sheave bushings, bearings and strands; open and closed silent and roller chains. Ideal for use in automatic lubrication systems.

LE is happy to offer industrial lubricant and reliability recommendations for a variety of applications, and to provide product-specific data on all of our items to help you make the right decision. To learn more about our wire rope lubricants, wire rope lubricators as well as our other enhanced lubricants and lubricant reliability products, please

DESCRIPTIONWire ropes contain numerous moving parts that require lubrication. Each time the rope bends or flexes, the internal strands rub together. WRL™coats these strands to prevent friction and wear. This results in longer life, less downtime for rope changes and more production.

JET-LUBE’s WIRE ROPE and CHAIN LUBRICANTquickly penetrates to the cores. This ensures that the rope is lubricated throughout while providing a nondrying, non-tacky film on the outside of the rope that protects outer strands from corrosion, as well as lubricating the wire rope drums and sheaves.

Part One in this series appeared in our June issue and dealt with early and more recent investigations which have proved the importance of wire rope lubrication. Part Two (July issue) covered the duties and properties of wire rope lubricants.

Vitalife® bio-lube is for environmentally sensitive applications. Vitalife® bio-lube is a unique light-bodied wire rope lubricant and protector built from environmentally safe base fluids. For field application it offers outstanding lubrication, penetration and preservation of wire ropes. The consistency of Vitalife® bio-lube makes it suitable for manual and automatic application. It can be applied with relative ease even under the most severe climatic conditions. Vitalife® bio-lube is produced from the highest-quality readily biodegradable oil base stocks. In addition to having excellent lubricating properties, they contain selected additives to obtain acid and alkali-resistance, water-displacing properties, excellent rust prevention, oxidation stability and penetration. The high polarity of Vitalife® bio-lube enables into creep and "wet" the metal surface forming an adhesive and protective film.Vitalife® products are the preferred wire rope lubricants in the industry because of their ability to penetrate into wire rope and displace water and contaminants, thus reducing wear and corrosion throughout the rope

The Chain and Wire Rope Lubricant is a heavy duty high temperature and pressure lubricant that penetrates chains, cables, and wire rope to deposit a wear resistant coating. The foam spray clings to the surface penetrates and coats leaving a Molybdenum and extreme pressure lubricant on the inner surfaces. This two in one lubricant both penetrates into the core of the wire rope , evaporates and leaves behind a heavy lubricating film to protect and lubricate each strand and with a second coating penetrates slightly and seals the outside from moisture reducing wear and corrosion.

The Chain and Wire Rope Lubricant can be used on conveyors, hoist chains, link and roller assemblies, rail equipment, mining equipment, road and construction machinery, cutter bars, material handling equipment, chain saws, etc.

SWEPCO 150 Superior Wire Rope Grease is a semi-fluid grease, especially formulated for lubrication and protection of expensive wire ropes and cables. High performance synthetic base stocks and state-of-the-art overbased calcium sulfonate chemistry provide industry leading extreme pressure, antiwear and corrosion protection.

Coats exteriors to eliminate abrasive wear and corrosion. Prolongs the life of wire rope, sheaves, pulleys, drums, guides, pins and rollers in a variety of applications. These include cranes, hoists, marine tow and mooring lines, dockside cables, aerial tramways, dredges, draglines, mining, elevators and many other applications in construction, mining, transportation and manufacturing.

SWEPCO 150 Superior Wire Rope Grease is a high performance synthetic lubricant with state-of-the-art overbased calcium sulfonate chemistry that provides superior resistance to wear, rust and corrosion in a wide range of heavily loaded wire rope applications. Wire ropes run longer, cooler, smoother, quieter, more efficiently and more economically with greater equipment reliability and service life.

Mobilarma 798 works well between the strands of wire rope providing excellent lubrication as well as protective films. These characteristics reduce wear and improve life of the wire ropes as well as minimize maintenance costs associated with their use. It is compatible with other wire rope core impregnating materials that may have been applied during manufacture. It is easy to apply and economical to use.

Our users can always expect excellent performance from any one of our Kirkpatrick wire rope lubrication systems. Their superb engineering provides unmatched strand lubrication and cleaning benefiting customers in any industry where wire rope maintenance is a priority. The Wire Rope Surface and groove pattern are scraped clean of penetration blocking debris and product buildup as the wire rope surface is uniformly coated with new lubricant. Every space within the wire rope open to receive the newly applied wire rope lubricant is filled.

Optimum penetration occurs as the wire rope being serviced passes through a controlled 100% pressurized immersion within the system’s internal seal lubrication chamber. This immersion displaces any entrapped surface moisture within the rope’s internal strands and replaces it with the newly applied coating product. You can trust Kirkpatrick systems’ functionality with high- and low-viscosity coatings. Higher viscosity coating products maximize fluid film support against strand rubbing that can shorten any working ropes life due to friction wear. In the event your application requires low viscosity coatings such as a mining friction hoist; our systems easily apply those products as well accommodating high wire rope travel speeds.

We offer both standard and customized solutions for Wire Rope Lubricant to Cranes, Offshore, Onshore, Oil & Gas, Marine, Port, Ship Management, Construction, Transportation, Steel, Industrial and EPC Contractors. We are serving Worldwide Clients based in Dubai, United Arab Emirates UAE, Saudi Arabia, Oman, Qatar, Kuwait, Bahrain, Iraq, Kurdistan, Yemen, Lebanon, Jordan, Sudan, Egypt, Nigeria, Algeria, Angola, Kenya, Tanzania, South Africa, Morocco, Libya, Kazakhstan, Armenia, Azerbaijan, Turkmenistan, Tunisia, Ghana, Tanzania, Uzbekistan. We are Looking forward to fulfilling your expectations with the best of our product range. Our Excellent Logistics setup supports shipping of goods to major Cities Such As Dubai, Abu Dhabi, Al Ain, Sharjah, Ajman, Ras Al Khaimah, Fujairah, Doha, Muscat, Kuwait, Riyadh, Jeddah, Dhahran, Jubail And Yanbu, Baghdad, Basra, Mosul, Erbil, Sulaymaniyah, Manama, Beirut, Amman, Sanaa, Aden, Mukalla, Khartoum, Abuja, Algiers, Luanda, Nairobi, Dar es salaam, cape town, Durban, Johannesburg, Rabat, Tripoli, Benghazi, Misrata, Ashgabat, Almaty, Aktau, Yerevan, Baku, Accra, Lagos, Port Harcourt, Port Sudan, Tunis, Port of Mombasa, Dodoma, Dar Es Salaam, Aktobe, Tashkent, Balkanabat, Turkmenbashi, Kirkuk. We will be pleased to serve your requirements with the best of our products.

Part One in this series appeared in our June issue and dealt with early and more recent investigations which have proved the importance of wire rope lubrication. Part Two (July issue) covered the duties and properties of wire rope lubricants.