rod basket workover rig supplier
WILSON WELL SERVICE RIG (Ref#3000Ta) 103’ x 248,000# derrick, Out of service since 2017, lot of rust, will start and run and/or drive down the road POR
Refurbished, 700 hp, Double drum 2042 drawwroks with Parmac 202 brake assist, (2) Caterpillar 3406 Engines, (2) rebuilt Allison 750 6 speed auto transmission with reverse. 112" x 300,000 # hook load capacity on 8 lines, clear height 97 feet, leg spread 7" 6-1/2", racking board, oil bath chain case, elevated rotary drive, all raising lines and guidelines. The Draw-works, hydro-mantic break, and crown assembly have been rebuilt. Heavy duty Draw works drive propeller shaft through right angle gear box, rotary drive propeller shaft, heavy duty reverse gear box and oil bath roller chain, and a self-locking handling winch. Mounted on triple front axle mechanical 6 axle carrier with 134,000# capacity designed to meet highway safety standards with necessary toughness for off road operations. Price: $265,000
Manufactured 2014, 72’ x 180,000# derrick on 4-line (250,000# on 6-line), mounted on 5 axle carrier, Detroit Series 60, Allison transmission, all hydraulic, 8000’ of 5/8” sandline, 100 ton McKissick casing blocks, 1” line 42” x 12” casing drum, 42” x 12” sand drum, disc assist on casing drum, 1500 hours, 3000 miles. Westco power tongs 1-1/2”, 2”, 2-7/8” and 5-1/2”, set of bails/links, tubing elevators 1-1/2” – 2”, rod hook, elevators, wrenches, swab tools, Martin Decker weight indicator, stored inside Price: $645,000
Derrick fell onto rig when being raised, derrick would need to be replaced or repaired. Built 1981, double drum, 42 x 12, 42 x 8, swab drum removed from jack shaft, 5-axle back in carrier, 250,000# derrick with double racking board and triple rod basket, Cat 3408, CLT 5860 transmission, Cooper right angle box, 4 hydraulic leveling jacks, air rod transfer in derrick, hydraulic winch, Kerr 6 cyd 10000 psi Mustang pump powered from jack shaft, Kerr 3-valve release 10,000 psi, tong carrier f/Foster, steel work platform, Parmac 22 SR hydromatic brake. Extra rebuilt 3408 Cat engine. Price as is: $112,500
Chinese built 2006, 8300 hours, 104’ x 250,000# derrick, rod basket and tubing board (18000’ tubing capacity), Detroit Series 60 diesel engine, 5680 Allison 5-speed transmission, sandline drum with 14,500’ 9/16” sandline (new January 2022), main drum with 1’ drill line on 6 lines with conventional brake pads and brake assist (new November 2021), brand new winch line (replaced May 2022), mounted on 6 axle carrier (2 steer, 2 drive and 2 tag), total weight 100,000 lbs., currently working Price: $270,000
Manufactured 1981, mounted on 5 axle carrier, double triple service rig, 96’ x 250,000# derrick, Detroit Series 60 12.7 diesel engine, Allison transmission, 9/16” sandline, 1” drill line, hydraulic jacks, hydraulic catwalk, travelling block, tubing bard, rod basket and all necessary lines. Tooling not included. Price: $115,000
Manufactured 1983, double drum, 96’ x 180,000# derrick, mounted on 5 axle carrier with 92T engine, Allison transmission Price rig only: $300,000 Price with tooling:$340,000
WILSON 42 WELL SERVICE RIG(Ref#7562Ta) Manufactured 1975, 180,000# Pemco double/triple derrick, mounted on Wilson carrier with Detroit 8V71 engine, 4 hydraulic leveling jacks, ready to work Price rig only: $74,500 Price with tooling: $94,500
Manufactured 1983, 70" x 120,000# non telescoping stiff mast, double drum 26 x 8, Detroit 6V71 diesel engine, 740 Allison transmission with Spicer power divider, mounted on 4 axle carrier. Rig runs and truck drives, stacked for several years, good condition Price: $93,500 USD
FRANKS 500 WORKOVER RIG(Ref#7615Tc) Built 1980, refurbished 2018, 102" x 250,000# mast, mounted on 5 axle carrier, new engine and transmission, 150 ton blocks, 15,000’ sandline, ready to work Price: $495,000
FRANKS 300 SERVICE RIG(Ref#1169Ta) 4-legged derrick, Series 60 Detroit engine, 6850 Allison transmission, blocks, Foster tongs, mounted on 4 axle carrier, working condition Price: $37,500
Manufactured 1979, double drum drawworks, Lebrus grooved for 1-1/8" drill line swedged to 1", 9/16" sandlne, Totco 190,000# weight indicator, air clutches, Parmac single hydromatic brake, hydraulic and pneumatic controls, Wilson 96" x 180,000# mast hydraulically raised and scoped, 3-stage raising ram, crown safety platform, double tubing board, triple rod board, ladder, guylines, adjustable working platform. Wilson tandem axle front, tri axle rear carrier with Detroit Series 60 diesel engine, electric start, radiator, gauges, Allison automatic transmission, air compressor, hydraulic pump, single man cab, Braden hydraulic winch, hyd reservoir, water tank, 4 hyd levleing ajcks, folding walkways, safety rails, toolboxes, McKissick 100 ton block, 84"L elevators, Foster hyd tubing tongs, Gill rod tongs, Cavins Type C tubing slips, 2-7/8" tubing elevators, 2-3/8 tubing elevators, rod elevators Price: $245,000
WILSON MOGUEL 42 WELL SERVICE RIG(Ref#3177Tb) Two available, 96" x 280,000# mast, Detroit Series 60 engine, 5860 Allison transmission, mounted on 5 axle Wilson carrier, handling tools Price: $315,000
Workover rig with 83’ telescoping derrick, 10’ crown extension, 200,000# lift capacity, 100,000# snubbing capacity. Catwalk with 42’ reach, forward and revere motion, hydraulic pipe slide, six portable pipe racks, powered by workover rig. 5000 ft/lb hydraulic rotary, 15k psi working pressure capability kelly hose, 300 ton mast with 5 x 5 heavy wall box tubing and 2 x 2 heavy wall cross sections, (2) mast raising cylinders, 9-1/8 x 25’ telescoping cylinders/crown sheaves with cable guides, (2) winch sheaves/snubbing sheaves, SRS fall protection, retractable flow tube design, non-swivel boom pole on curb side winch, (2) mast supports, 1” lifting cables, mounted on 5 axle Crane Carrier (3rd axle drop), with 375k Volvo Penta engine, 150 gal fuel capacity, hydraulic self-leveling components, 6 speed Allison transmission, 1:1 gear box, (2) 65 gpm pumps, (2) 30 gpm pumps, (1) 28 gpm Commercial shearing pump, 40 gal accumulator storage, single man cab, hydraulic leveling jacks Price on Request
Year 2006, double drum, 8V71 Detroit diesel engine, 5860 Allison automatic transmission, mounted on 5 axle Crane Carrier, 108’ x 225,000# derrick, 100 ton McKissick 3-sheave block, fully tooled with 6’ bailers, 58-93 tongs, 2-3/8 and 2-7/8 elevators, 3/4 and 7/8 rod elevators and wrenches, eight indicator, laydown floor Price: $162,500
Manufactured 1960’s, double drum, single rig mast, 64’ x 250,000# (tubing and rod racks), 70 ton blocks, 2 lines, Detroit diesel 60 gpm @ 2000 psi, hydraulic system, air clutch. Rig was refurbished 2013/2014 at a cost of $130,000: repairs included used 65’ derrick installed, new 1” main line, repairs to air system, hydraulic system upgrade, leveling jacks, derrick ljghting, tires, 70 ton blocks installed. But the rig has been sitting since 2015 and now needs rebuilding. It doesn’t run. Price as is: $19,500
Manufactured 1980, completely refurbished 2004, 5 axle double drum well service unit, double 15 Parmac brake on main drum, 96" x 180,000# hydraulic raised mast, mast lighting, Detroit 60 Sereis engine, 5860 Allison 6 speed transmission, 4 hydraulic leveling jacks, dual manual outriggers, PD12 Braden utility winch, McKissick 100 ton tubing block 21-31 diving, 1000" of 1" tubing line, 13000" of 9/16" sandline Price: $225,000
CARDWELL KB200B SERVICE RIG(Ref#11674Ta) 72’ x 140,000# stiff mast, 40 x 10 double drum drawworks, 2 aux deck winches, tubing board, rod board, cat walks, railing, stairs, floor BOP controls and accumulator bottles, McKissick 75 ton tubing block and hook, mounted on 5 axle carrier, Detroit 8V71 diesel engine, Alliston CLBT4460 auto transmission PRICE: $127,500
Rig manufacture 1980, mounted on 1980 GMC Brigadier with Cat 3208 engine, includes elevators & misc tools, also includes 1996 1-ton Super Duty tool truck, tandem axle, Cat 3208 diesel, sitting 1-1/2 years Price: $92,500
69’ x 140,000# striff mast, 32 x 7 double drum drawworks, 2 aux deck winches, mounted on 4 axle carrier, Detroit 6V71 diesel engine, Allison HT750 automatic transmission, tubing board, rod basket, cat walks, railings, stairs, ladders, lights, floor, BOP controls, accumulator bottles, 6 sheave crown, 75 ton McKissick tubing block Price:$105,000
Manufactured 1991 (not used until 2005), 38 x 10 double drum, p/b 8V92T diesel engine (430 hp), Allison 750 transmission, 18" twin disc cloutches, 48" double disc brake assist on main drum, water mist on both mai and sandline drums, main drum has 7/8" Lebus grooving, 104" x 240,000# mast, tubing board, rod basket, 13,500" of sandline, 875" of 7/8" swedgeline, 100 ton SOWA block, all mounted on tandem axle trailer Price: $375,000 PRICE REDUCED: $325,000
1980, 475 hp, single drum (new), reworked, 96" x 205,000# hydraulically raised mast, 6 lines, crown block: 3 new sheaves blocks and bearings, racking board, guide wires, (2) hydraulic hoist, weight indicator, block, elevator links, fall safety device, work platform, mounted on 4 axle carrier with Detroit Series 60 diesel engine, Allison transmission, rig in excellent condition and has been well maintained, ready for use PRICE: $115,000
SKYTOP BREWSTER RR400(Ref#13190T) Mounted on 4 axle carrier, single drum drawworks, 8x7 disc assisted brakes, tubing board, Cat3406B engine, Allison 860DB transmission, 100 ton McKissick block, Foster 58-92R tongs, misc hand tools, approx 36" base beam for rig, ready to work Price: $110,000
Manufactured 1976, 50 Series Detroit engine, 4460 Allison auto transmission, 96" x 180,000# Skytop derrick, 100 ton McKissick blocks, 7000" of 9/16" sandline, BJ tubing tongs, Guiberson air slips, 2-3/8 and 2-7/8 elevators, rod wrench, rod elevators, weight indicator, lubricator pump, misc tools Price: $320,000
72’ x 140,000# hook load telescoping mast, single tubing, double rods, self guyed, 36” x 8” double drum drawworks, Detroit Series 60 engine, Allison 6750 transmission, Level IV in 2005 Price: $490,000 CDN (approx. $390,000 USD)
500 hp, manufactured 2007, Pemco 104" x 225,000# derrick, double triple, 100 ton McKissick blocks, BJ style tubing tongs, rod tongs, rod basket, 8"3" bales, 16,993 miles on truck, 4016 hours, all handling tools
Detroit 8V-71N Diesel Eng, Allison CBT-4460-1 Trans. Service King 96" x 180,000# Hydraulically Raised & Scoped W/5-Sheave Crown, Dbl Tubing & Triple Rod Boards. Mtd On Franks 4-Axle Carrier W/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Floatation Front Tires Price: $350,000
Refurbished 2017, 4 lines, 96’ x 205,000# mast, 8V71 Detroit engine, mounted on CCC, 75 ton McKissick blocks, tubing board, rod basket, work platform, rigged up and working in field Price: $295,000
Manufactured 1977, 72’ x 125,000# derrick, 8V71 Detroit engine (rebuilt), Allison 750 transmission, 6500’ of new 5/8” sand line, tubing line new, drum brakes new, new style McKissick blocks, working daily Price rig only: $157,500
38x10 drawworks, 4 axle Crane Carrier, 6V92 Detroit diesel engine, 4460 Allison tranmission, 96" x 133,000# mast with 4 lines, no block, no sandline, no rod board, no monkey board, needs a little work Price: $94,500
Double drum drawworks with hydromatic brake, 10" brakes, 96" x 180,000# derrick, mounted on 4-axle PEMCO carrier with hydraulic support legs, 8V71 Detroit, 4460 Allison transmission, Spicer 784 split shaft gearbox, 250 hp right angle drive, 650" of 7/8" tubing line, 8000" of 9/16" swab line, 100 ton Sowa block, hydraulic winch, hydraulic weight indicator, 84" links, 2-3/8" and 2-7/8" tubing elevators, BJ tubing slips, Foster 5893R power tongs with lift in derrick, rod hook, rod stripper, rod elevators, wrenches, transfers, rod fishing tools, misc hand tools and connections Price: $140,000
CAT 3406 Diesel Eng, ALLISON HT-750 Trans., 96"H 180,000# Telescoping Mast, Hydraulically Raised & Scoped W/4-Sheave Crown, Dbl Tubing & Triple Rod Boards, Adjustable Height Work Platform. Mtd On FRANKS "Cruiser" 4-Axle Carrier W/NEW Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Flotation Front Tires Price: $300,000
Manufactured 1974, double drum drawworks, double triple 96" x 180,000# derrick with a hydromatic. The rig has working line with heavy traveling block and approx. 12,000" 9/16 sand line. Mounted on Skytop carrier with tandem steering and rear ends 4 axles W/ tag axle, 4 leveling jacks, powered by an 8V-71 with a Allison 4460 transmission, (note transmission was overhauled in early 2000"s) and the engine has a new head on right bank. The rig has two leveling jacks on the rear and two leveling jacks on the front which are located right behind the steering axels. Tooled out with hydraulic rod and hydraulic tubing tongs, air slips, rod and tubing elevators, hand tools and misc over items. PRICE REDUCED: $115,000
Double drum, double pole 8-5/8" x 7 x65", 6,000" of 2-7/8" line, mounted on 1974 International Model 2070A tandem axle truck with Detroit diesel engine, leveling jacks, 454 Chevy propane engine on deck with 250 gallon propane tank, automatic transmission for smooth operating, Foster 58 power tongs, Guiberso air clips, tooled for tubing and rods, will do 6000" of 7" tubing, currently working Price: $89,500
10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 with 8’ lift ram, air backup, swing around tong rack, mounted on 2001 Freightliner F80 truck, Cat C12 Series 3125, Fuller 9-speed transmission, PTO, winch for pole scope Tulsa 48, blocks raise pole, dual fuel tank, dual battery, 50 gal hyd tank, toolboxes, hydraulic outriggers, BJ rod tongs, ¾” and 7/8” heads, tools, swabs, extra tongs, orbits, drilling head Price: $242,500
Built 1979, 65’ 10” x 13” poles hydraulically raised, block line, sandline, winch line, hydromatic brake, new Detroit 8V71 engine (installed by Stewart Stevenson) and new Allison 750 transmission, mounted on 4-axle carrier with single man cab, hydraulic leveling jacks, hydraulic utility hoist, air and hydraulic control and floatation tires, sand pump, two bailers, Foster tongs, 2 bailers, sand pump, rod and tubing elevators and all tools Price:$94,500
Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable, no tooling Price: $52,500
10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000 PRICE: $49,500
Cable Tool Drilling and Completion Rig, 60" double poles rated to 150,000#, 5000" drill capacity, 10,000" pull capacity, propane Waukesha 145 engine, 500 gal propane tank, trailer moutned with International 4300 truck, last drilled 2012, 2300" drill line on drum, 3500" on spool casing drum, heavy block sandline drum, cat heads each side, tooling, spare engine Price: $72,500
400’ of 7/8” block line, 9/16” sandline drum (no cable), 2000’ of ¾” drilling drum, 3 McKissick sheaves, air clutches and controls, mounted on 1961 Mack truck with 250 hp Cummins engine, older rig but runs good. Includes elevators, oil saver pump, no BJ tongs, currently working. Price: $87,500 - Pennsylvania
Triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools Price: $112,500 - Oklahoma
Well Service | Workover Rigs - 844/80 Double drum draw works. looks to be recently rebuilt. Has new Lebus Grooving on Tubing Drum. Comes w/ 250 HP 2 speed jackshaft/RA BOX. More Info
Well Service | Workover Rigs - CARDWELL KB200B Freestanding Oilfield Workover Rig / Service Rig / Pulling Unit, Service Rigs, Used Cardwell KB200B Freestanding Service Rig, 5 Axle Carrier, Detroit 8V71... More Info
Well Service | Workover Rigs - WELL SERVICE RIG - COOPER 350 Well Service Unit p/b DETROIT 8V-92 Diesel Eng, ALLISON 750 Trans, 42X12-38x8 DRAWWORKS w/dual disc assist, 97â 200,000# Telescoping M... More Info
Well Service | Workover Rigs - CROWN 350 SERIES -- SERVICE KING 104" 205,000# DERRICK, CAT3406, ALLISON 5860,38X10 DOUBLE DRUM DRAWWORKS, CROWN SHEAVES REBUILT 2013 MAIN26âX4,SANDLINE 22â, NE... More Info
Well Service | Workover Rigs - 2008 Crown/Cabot 1058 Service unit mounted on 4 axle carrier w/Detroit 60 Power. New 5860 Drop Transmission. 72" Double rod/single tubing Derrickmast 125000# Rig is in Ex... More Info
Well Service | Workover Rigs - WELL SERVICE RIG - FRANKS 1287-160-DTD-HT D/D Well Service Unit p/b DETROIT 8V-71N Diesel Eng, ALLISON CBT-4460-1 Trans. SERVICE KING 96" 180,000# Hydraulically Raised & ... More Info
Well Service | Workover Rigs - FRANKS 300 D/D 1287 w/hydromatic brake, Well Service Unit p/b DETROIT 8V-71 Diesel Eng, ALLISON 750 Trans, (Reman Dec 2011) FRANKS 96âH 150,000# Tri-Scope Telescopin... More Info
Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b CAT 3406 Diesel Eng, ALLISON HT-750 Trans, FRANKS 96âH 180,000# 4-Leg Telescoping Mast, Hydraulically Raised & Scoped w/4-Sheave... More Info
Well Service | Workover Rigs - FRANKS 658 D/D Well Service Unit p/b Series 60 Detroit Diesel Eng, ALLISON 5860 Trans, 102âH 225,000# (on 4 line) Telescoping Mast, Hydraulically Raised & Scoped, Db... More Info
Well Service | Workover Rigs - IDECO H35 96̢۪ 210,000 MAST, DETROIT 60 SERIES ENGINE, ALLISON 5860 TRANSMISSION, REFURB 2005, IDECO DERRICK REPLACED WITH NATIONAL DERRICK, TUBING DRUM CON... More Info
Well Service | Workover Rigs - IDECO RAMBLER H-35 Oilfield Workover Rig / Service Rig / Pulling Unit, Service Rigs, Used Ideco Rambler H-35 workover rig / service rig / pulling unit, 4 axle carrier, De... More Info
Well Service | Workover Rigs - 2015 INTERNATIONAL PAYSTAR 5900 Flushby Unit. C/w 2003, Refurbished in 2015, Western Fab Ltd. flushby unit, s/n 03-09-1008, 50 Ft. Mast height, 50,000 lb. pull rating, fr... More Info
Well Service | Workover Rigs - 2005 KENWORTH T800 Flusby Unit. C/w Lash Ent. flushby unit, 47 ft mast, slant compatible, 3x5 Gardner Denver triplex pump, 5000 psi, 2005 Advance 8m3 tank, TC 406 code, P... More Info
Well Service | Workover Rigs - 2003 KENWORTH T800 Flushby Unit. c/w Online flushby unit, 47 ft. mast, slant compatible, Pullmaster HL25 wotking winch, Pullmaster PL5 catline winch, 2002 wabash two comp... More Info
Well Service | Workover Rigs - 2005 KENWORTH T800B Flushby Unit. c/w Online flushby unit model 50-50, s/n 24641, 40 ft. mast,Salnt compatable, Pull master HL25 and PL5 winch, Gardner Denver 3x5 triplex... More Info
This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.
About products and suppliers:Alibaba.com offers 224 workover rig manufacturers products. About 49% % of these are oilfield drilling rig, 28%% are mine drilling rig.
A wide variety of workover rig manufacturers options are available to you, You can also choose from diesel, electric and gasoline workover rig manufacturers,As well as from energy & mining, construction works , and manufacturing plant. and whether workover rig manufacturers is unavailable, 2 years, or 6 months.
Enjoy the best returns on your investment with these supreme hydraulic workover rig ranges at Alibaba.com. Their efficacy and reliability will prove that they’re worth their price tags. They will empower you to attain your mining and drilling goals and definitely surpass your expectations.
The hydraulic workover rig you’ll come across at Alibaba.com are designed with the operators’ safety and comfort in mind. Advanced safety precautions such as perfect ergonomics for physical comfort, reduced noise, low dust emissions, and minimal physical hazards are notable features of the hydraulic workover rig. Operating these hydraulic workover rig is not very complicated. They have many standard features and professionally trained operators will have an easy time working with them.
Get wholesale hydraulic workover rig from global wholesalers, Alibaba. At competitive prices, you can maintain, modify, enhance or replace your machines and vehicles. From the selection of new, used, and rebuilt parts from different manufacturers, choose the suitable hydraulic workingover rig to get your construction equipment up and running in no time. The collection of hydraulic worksover rig at Alibaba.com includes parts for both mechanical and electrical systems. From transmission systems to hydraulics, engines to pumps, and brakes to wheels, Al Alibaba.com got it. You can chat with your supplier to make modifications or even get custom designs, and that’s what Alibcom. for your business needs.
This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.
The Lifting Solutions Rod Rig is engineered for efficient conventional sucker rod and light-well servicing. Designed for quick mobilization to any wellsite, the unit is smaller and faster than a conventional service rig and can be rigged up or down in 30 minutes or less. The Rod Rig is equipped with a pump and tank for diagnosing well problems and killing and flushing wells. In addition, the unit has a 72-ft mast with rod basket for hanging double joints of all sucker rod sizes. To enable more flexibility, the Rod Rig can be paired with our Truck Mounted Gripper (TMG) for continuous sucker rod servicing in addition to conventional sucker rod servicing.
Comes With: Caterpilar C15, Allison A/T 6 spd, single drum, 150 ton 4 sheave block, 106 ft 2 stage mast, tubing board, rod basket, air lift 3rd, walking beam susp
PetroActive offers the oil and gas industry time proven and quality oilfield equipment & services, Our equipment are installed in some of the largest and most diverse production regions, We have developed a reputation for providing products of superior quality and state-of-the-art design.
PetroActive established in 2020, focusing on the oil & gas sector, having the support of our sister companies “TMU Supplies & OilSave Trade” which gave us the edge to deliver a faster and safer performance that which gave us the edge to deliver a faster and safer performance that raises your well productivity and profitability through providing integral solutions to our clients with cost & time effective relying on our vast experience, huge inventory and excellent relations with our suppliers, strong financial structure & finally the employees who are the driving force behind all the company processes which had been always supporting PetroActive"s growth and lead to our customer"s satisfaction.
Central to this strategy is a determination to guarantee customers the maximum level of service and to provide them at an international level with as complete as product and service package as possible.
Our focus on specific market segments which help create added value for our workers .We stand out thanks to our customer- oriented business approach and the high quality of our products and services.
PetroActive offers the oil and gas industry time proven and quality oilfield equipment & services. Our equipment are installed in some of the largest and most diverse production regions.
When you"re seeking the field flexibility to complete your drilling faster, easier and safer, count on Geoprobe® drill rigs engineered for versatility and manufactured for reliability. Industry leaders depend on our ongoing commitment to innovation and industry-leading customer support to advance their business ahead of the competition. Digital readouts providing instant feedback, enhanced safety features, easy operation, and availability of training options mean veteran drillers find their jobs simplified while new drillers build confidence, making them productive as they"re quickly coming up the learning curve.
Whether you’re facing consolidated materials, glacial till, or backfill rubble, quickly complete complex holes to greater depths with the powerful GV5 50K sonic head on our line of sonic drill rigs. Engineered by Geoprobe® to advance up-to 12-inch tooling, the GV5 produces torque required to maintain rotation in tight formations – all backed by a 2-year warranty.
Increase depth advancement and recovery speeds while minimizing waste with the 8150LS sonic drilling rig engineered for driller safety, sampling speed, and operation efficiency.
Geoprobe® combination drill rigs possess the power to tackle difficult site conditions combined with the versatility to exceed subsurface sampling expectations to equal business growth in both direct push and rotary drill rig applications.
Combine geotechnical augering and high-speed rotary with advanced direct push capability to offer additional services to your customers, quickly going from coring rock to pushing CPT - all in one drill rig.
From crowded street corners to far removed places, tackle various environmental, geotechnical and exploration applications with a single machine combining rotary drilling and direct push, saving time and money required to mobilize multiple drill rigs.
In a geotech industry ruled by rate-per-foot, Geoprobe® geotechnical drill rigs capable of swiftly sliding from rotary to automatic drop hammer, even to CPT or direct push — without having to move drill mast or machine — position you for increased production and profit.
Save time and effort swiftly sliding the innovative centerline head side shift into position for rotary, automatic drop hammer, event CPT or direct push. No need to move the geotechnical drill or drill mast on the compact, off road drill rig.
Maximize the value of your investment by choosing a CPT drilling platform best suited to your specific business model. Whether you’re seeking a dedicated CPT drilling rig or a versatile drilling rig to run a variety of applications, you’ll find the combination of features to push your business ahead.
Generating a name for itself and redefining the way sites are investigated in the environmental industry, Geoprobe® continues to advance direct push drilling through continued innovation of its line of high-quality, hydraulically-powered direct push drilling rigs
Featuring a proven GH63 percussion hammer and able to use 5-foot tooling, the 6011DT direct push drill rig is still being sized to slip into small spaces.
To ensure our website performs well for all users, the SEC monitors the frequency of requests for SEC.gov content to ensure automated searches do not impact the ability of others to access SEC.gov content. We reserve the right to block IP addresses that submit excessive requests. Current guidelines limit users to a total of no more than 10 requests per second, regardless of the number of machines used to submit requests.
All Categories2 phase separator (6)Separator (6)Agitator (1)Mixing (1)Air Compressor (3)Compressor (2)Oil Free Compressor (1)Backhoe (14)710 (1)Back hoe (2)Digger (3)Excavator (2)Extenda hoe (2)Loader (1)Rear Actor (1)Tractor (2)Boom (14)Aerial work platform (1)Basket crane (2)Boom Lift (1)Cherry picker (2)Elevating platform (1)Lift (2)Man lift (1)Manlift (1)Mobile elevating work platforms (2)Reachlift (1)Boom Lift (4)Boom (1)Cherry picker (1)Man lift (1)Reach lift (1)Bucket Truck (2)Lift Truck (1)Man lift (1)Centrifugal Pump (12)Centrifugal Pump (6)Mix Tank (1)Mixing (1)Mud Pump (1)Centrifuge (267)Centrifuge (23)Control Panel (1)Decanter (89)Dewatering (25)Disc Stack (1)Drilling Equipment (37)Processing Equipment (36)Solids Removal (26)Trailer (2)Water Treatment (26)Centrifuge Stand (2)Centrifuge (2)Construction (1)Backhoe Loaders (1)Control Panel (3)Centrifuge (3)Conveyor (1)Screw Conveyor (1)Crane (5)Crane (1)Crane Truck (1)Crawler crane (1)Telescopic Crane (2)Cuttings Dryer (10)Centrifuge (1)Control Panel (2)Drilling Equipment (1)Dryer (4)Solids control (1)Solids Removal (1)Degasser (2)Atmospheric Degasser (1)Vacuum Degasser (1)Desander (2)Drilling Equipment (1)Solids Removal (1)Desilter (2)Drilling Equipment (1)Solids Removal (1)Diesel Engine (4)Caterpillar (1)Diesel (1)Diesel Engine (1)Engine (1)Drilling (1)Swivels (1)Drilling Equipment (45)Atlas copco (1)Blowout Preventer (1)Centrifuge (5)Cuttings Dryer (1)Degasser (1)Drilling (1)Drilling Rig (1)Dryer (1)For Sale (1)Hydraulic (1)Mud Cleaning (1)Mud Recycling (1)Power Swivel (2)Processing Equipment (5)Shale Shaker (10)Solids Control (7)Solids Removal (1)Tanks (1)Tophead Drive (1)Water Drilling (1)Water Well (1)Drilling Rigs (7)Drilling Equipment (1)Workover Rig (6)Drive In Bin (1)Solids Bin (1)DUMP TRUCK (3)10yard (1)DUMP (1)HAULER (1)Electrical & Electronic Components (1)Wire (1)Excavator (2)Digger (1)Heavy machinery (1)Filtration (3)Filtration (1)Forklift (2)Lift (1)Warehouse forklift (1)GENERATOR (2)POWER (1)TEMP POWER (1)Heater (2)Electric (2)High Shear Hopper (1)Shearing (1)Hydraulic Screen Vibrator (1)Shale Shaker (1)Inline Heater (1)Heater (1)Light Tower (7)Disel Engine (3)Generator (1)Light (1)Light Plant (1)Tower (1)Liner hangers (1)Mini Excavator (2)Excavator (1)Mini Ex (1)Mixing Tank (13)Centrifugal Pumps (1)Diesel Driven (1)Diesel Engine (1)Drilling Equipment (1)Mix Tank (1)Mixing (1)Mud Recycling (1)Mud Tank (1)Shaker Tank (1)Tank (4)Mud Guns (1)Mixing (1)Mud Hopper (1)Shearing (1)Mud Pumps (14)Drilling Equipment (2)Gardener Denver (2)Mud Pump (4)Processing Equipment (2)Triplex (2)Triplex pump (2)Oil, Gas and Mining (42)Cuttings Dryer (1)Drilling Rigs (5)Frac Pumps (32)Hydraulic Rig (1)Processing Equipment (1)Separation Equipment (1)Transmission (1)Oilfield Equipment (7)Power Swivel (7)Parts (1)Dryer (1)Pressure Washer (7)Processing Equipment (92)Air Stripper (1)Artificial Lift System (1)Centrifuge (49)Cuttings Dryer (2)Dewatering (1)Dryer (1)Filter Press (1)Mix Tank (2)Oil Water Separation (3)Pump Jack (1)Remediation (1)Rod Pump (1)Separator (2)Shale Shaker (12)Solids Control (2)Tanks and vessels (1)Test Separator (1)Vessels (2)Water Filtration (1)Water Softener (1)Water Treatment (4)Wemco (2)Production Equipment (2)Combustor (1)Flare (1)Progressing Cavity Pumps (1)Positive Displacement Pumps (1)Pump (13)Centrifugal Pump (3)Centrifuge Feed Pump (1)Diesel Driven (1)Lobe Pump (1)Mulitstage Pump (1)Positive Displacement Pumps (3)Rotary Lobe Pump (1)Self Priming (1)Trash Pump (1)Reach Forklift (3)Forklift (1)Reachlift (1)Up and over (1)Scissor Lift (20)Boom Lift (2)Cherry picker (3)Lift (4)MAN LIFT (2)Manlift (3)REACHLIFT (1)Rough Terrain (1)Scissor (4)Shaker Screen Cleaner (1)Shaker Screens (1)Shaker Screens (1)Screens (1)Shale Shaker (9)Centrifuge (1)Screens (1)Shaker (4)Shaker Screens (1)Shale Shaker (1)Solids Removal (1)Skid steer (6)Bobcat (2)Skidsteer (2)Track (1)Track Skid steer (1)Stand Centrifuge (7)Centrifuge Stand (7)Tanks & Kettles (1)Coalescer (1)Three phase separator (7)Separator (7)Top Drive (5)Drilling Equipment (1)Drilling Rig (1)Hydraulic (1)TOP DRIVE (1)Well Service Equipment (1)Trash Pump (5)Centrifugal Pump (1)Diesel Driven (1)Diesel Engine (1)Trash Pump (1)Water pump (1)Truck (3)Crew Cab (1)Pickup (1)Service & Utility Trucks (1)Vacuum trailer (2)Vac trailer (1)Vacuum (1)Vessels (12)Acid Tank (1)Frac Gel (1)Frac Tank (3)Mix Tank (1)Mud Tank (2)Tank (1)Truck (1)Water tank (2)Water Treatment (2)Reverse Osmosis (2)WATER TRUCK (3)Tank (1)TANK TRUCK (1)WATER (1)Welder (2)300Amp welder (1)Big Blue (1)Welding Equipment (1)Arc Welder (1)WHEEL LOADER (1)3 YARD WHEEL LOADER (1)
We formed the BOTTA Group as a team of internal oil rig operators, drilling contractors, rig and equipment manufacturers and logistics experts. Our management team offers you in excess of 300 years cumulative oil and gas experience.
Starting over 10 years ago with a small project of supplying a 100 tonne workover rig to Turkmenistan, we have since successfully grown to a globally respected rig supplier, delivering a large number of workover rigs and onshore drilling rigs to international operators. Our rigs gave rise to the need for equipment and spare parts supply which formed this key division of the group.
Currently we operate both BOTTA-Equipment, the oilfield equipment supply and services arm and BOTTA-Rigs,which supplies certified oilfield drilling rigs.
8613371530291