rod basket workover rig manufacturer

WILSON WELL SERVICE RIG  (Ref#3000Ta)  103’ x 248,000# derrick, Out of service since 2017, lot of rust, will start and run and/or drive down the road POR

Refurbished, 700 hp, Double drum 2042 drawwroks with Parmac 202 brake assist, (2) Caterpillar 3406 Engines, (2) rebuilt Allison 750 6 speed auto transmission with reverse. 112" x 300,000 # hook load capacity on 8 lines, clear height 97 feet, leg spread  7" 6-1/2", racking board, oil bath chain case, elevated rotary drive, all raising lines and guidelines. The Draw-works, hydro-mantic break, and crown assembly have been rebuilt. Heavy duty Draw works drive propeller shaft through right angle gear box, rotary drive propeller shaft, heavy duty reverse gear box and oil bath roller chain, and a self-locking handling winch.  Mounted on triple front axle mechanical 6 axle carrier with 134,000# capacity designed to meet highway safety standards with necessary toughness for off road operations.  Price:  $265,000

Manufactured 2014, 72’ x 180,000# derrick on 4-line (250,000# on 6-line), mounted on 5 axle carrier, Detroit Series 60, Allison transmission, all hydraulic, 8000’ of 5/8” sandline, 100 ton McKissick casing blocks, 1” line 42” x 12” casing drum, 42” x 12” sand drum, disc assist on casing drum, 1500 hours, 3000 miles.  Westco power tongs 1-1/2”, 2”, 2-7/8” and 5-1/2”, set of bails/links, tubing elevators 1-1/2” – 2”, rod hook, elevators, wrenches, swab tools, Martin Decker weight indicator, stored inside  Price:  $645,000

Derrick fell onto rig when being raised, derrick would need to be replaced or repaired.  Built 1981, double drum, 42 x 12, 42 x 8, swab drum removed from jack shaft, 5-axle back in carrier, 250,000# derrick with double racking board and triple rod basket, Cat 3408, CLT 5860 transmission, Cooper right angle box, 4 hydraulic leveling jacks, air rod transfer in derrick, hydraulic winch, Kerr 6 cyd 10000 psi Mustang pump powered from jack shaft, Kerr 3-valve release 10,000 psi, tong carrier f/Foster, steel work platform, Parmac 22 SR hydromatic brake.  Extra rebuilt 3408 Cat engine.  Price as is:  $112,500

Chinese built 2006, 8300 hours, 104’ x 250,000# derrick, rod basket and tubing board (18000’ tubing capacity), Detroit Series 60 diesel engine, 5680 Allison 5-speed transmission, sandline drum with 14,500’ 9/16” sandline (new January 2022), main drum with 1’ drill line on 6 lines with conventional brake pads and brake assist (new November 2021), brand new winch line (replaced May 2022), mounted on 6 axle carrier (2 steer, 2 drive and 2 tag), total weight 100,000 lbs., currently working  Price:  $270,000

Manufactured 1981, mounted on 5 axle carrier, double triple service rig, 96’ x 250,000# derrick, Detroit Series 60 12.7 diesel engine, Allison transmission, 9/16” sandline, 1” drill line,  hydraulic jacks, hydraulic catwalk, travelling block, tubing bard, rod basket and all necessary lines.  Tooling not included.  Price:  $115,000

Manufactured 1983, double drum, 96’ x 180,000# derrick, mounted on 5 axle carrier with 92T engine, Allison transmission  Price rig only:  $300,000  Price with tooling:$340,000

WILSON 42 WELL SERVICE RIG(Ref#7562Ta)  Manufactured 1975, 180,000# Pemco double/triple derrick, mounted on Wilson carrier with Detroit 8V71 engine, 4 hydraulic leveling jacks, ready to work  Price rig only:  $74,500  Price with tooling:  $94,500

Manufactured 1983, 70" x 120,000# non telescoping stiff mast, double drum 26 x 8, Detroit 6V71 diesel engine, 740 Allison transmission with Spicer power divider, mounted on 4 axle carrier.  Rig runs and truck drives, stacked for several years, good condition  Price:  $93,500 USD

FRANKS 500 WORKOVER RIG(Ref#7615Tc)  Built 1980, refurbished 2018, 102" x 250,000# mast, mounted on 5 axle carrier, new engine and transmission, 150 ton blocks, 15,000’ sandline, ready to work  Price:  $495,000

FRANKS 300 SERVICE RIG(Ref#1169Ta)  4-legged derrick, Series 60 Detroit engine, 6850 Allison transmission, blocks, Foster tongs, mounted on 4 axle carrier, working condition  Price:  $37,500

Manufactured 1979, double drum drawworks, Lebrus grooved for 1-1/8" drill line swedged to 1", 9/16" sandlne, Totco 190,000# weight indicator, air clutches, Parmac single hydromatic brake, hydraulic and pneumatic controls, Wilson 96" x 180,000# mast hydraulically raised and scoped, 3-stage raising ram, crown safety platform, double tubing board, triple rod board, ladder, guylines, adjustable working platform.  Wilson tandem axle front, tri axle rear carrier with Detroit Series 60 diesel engine, electric start, radiator, gauges, Allison automatic transmission, air compressor, hydraulic pump, single man cab, Braden hydraulic winch, hyd reservoir, water tank, 4 hyd levleing ajcks, folding walkways, safety rails, toolboxes, McKissick 100 ton block, 84"L elevators, Foster hyd tubing tongs, Gill rod tongs, Cavins Type C tubing slips, 2-7/8" tubing elevators, 2-3/8 tubing elevators, rod elevators  Price:  $245,000

WILSON MOGUEL 42 WELL SERVICE RIG(Ref#3177Tb)  Two available, 96" x 280,000# mast, Detroit Series 60 engine, 5860 Allison transmission, mounted on 5 axle Wilson carrier, handling tools  Price:  $315,000

Workover rig with 83’ telescoping derrick, 10’ crown extension, 200,000# lift capacity, 100,000# snubbing capacity.  Catwalk with 42’ reach, forward and revere motion, hydraulic pipe slide, six portable pipe racks, powered by workover rig.  5000 ft/lb hydraulic rotary, 15k psi working pressure capability kelly hose, 300 ton mast with 5 x 5 heavy wall box tubing and 2 x 2 heavy wall cross sections, (2) mast raising cylinders, 9-1/8 x 25’ telescoping cylinders/crown sheaves with cable guides, (2) winch sheaves/snubbing sheaves, SRS fall protection, retractable flow tube design, non-swivel boom pole on curb side winch, (2) mast supports, 1” lifting cables, mounted on 5 axle Crane Carrier (3rd axle drop), with 375k Volvo Penta engine, 150 gal fuel capacity, hydraulic self-leveling components, 6 speed Allison transmission, 1:1 gear box, (2) 65 gpm pumps, (2) 30 gpm pumps, (1) 28 gpm Commercial shearing pump, 40 gal accumulator storage, single man cab, hydraulic leveling jacks  Price on Request

Year 2006, double drum, 8V71 Detroit diesel engine, 5860 Allison automatic transmission, mounted on 5 axle Crane Carrier, 108’ x 225,000# derrick, 100 ton McKissick 3-sheave block, fully tooled with 6’ bailers, 58-93 tongs, 2-3/8 and 2-7/8 elevators, 3/4 and 7/8 rod elevators and wrenches, eight indicator, laydown floor  Price:  $162,500

Manufactured 1960’s, double drum, single rig mast, 64’ x 250,000# (tubing and rod racks), 70 ton blocks, 2 lines, Detroit diesel 60 gpm @ 2000 psi, hydraulic system, air clutch.  Rig was refurbished 2013/2014 at a cost of $130,000: repairs included used 65’ derrick installed, new 1” main line, repairs to air system, hydraulic system upgrade, leveling jacks, derrick ljghting, tires, 70 ton blocks installed.  But the rig has been sitting since 2015 and now needs rebuilding. It doesn’t run.    Price as is: $19,500

Manufactured 1980, completely refurbished 2004, 5 axle double drum well service unit, double 15 Parmac brake on main drum, 96" x 180,000# hydraulic raised mast, mast lighting, Detroit 60 Sereis engine, 5860 Allison 6 speed transmission, 4 hydraulic leveling jacks, dual manual outriggers, PD12 Braden utility winch, McKissick 100 ton tubing block 21-31 diving, 1000" of 1" tubing line, 13000" of 9/16" sandline  Price:  $225,000

CARDWELL KB200B SERVICE RIG(Ref#11674Ta)  72’ x 140,000# stiff mast, 40 x 10 double drum drawworks, 2 aux deck winches, tubing board, rod board, cat walks, railing, stairs, floor BOP controls and accumulator bottles, McKissick 75 ton tubing block and hook, mounted on 5 axle carrier, Detroit 8V71 diesel engine, Alliston CLBT4460 auto transmission PRICE:  $127,500

Rig manufacture 1980, mounted on 1980 GMC Brigadier with Cat 3208 engine, includes elevators & misc tools, also includes 1996 1-ton Super Duty tool truck, tandem axle, Cat 3208 diesel, sitting 1-1/2 years  Price:  $92,500

69’ x 140,000# striff mast, 32 x 7 double drum drawworks, 2 aux deck winches, mounted on 4 axle carrier, Detroit 6V71 diesel engine, Allison HT750 automatic transmission, tubing board, rod basket, cat walks, railings, stairs, ladders, lights, floor, BOP controls, accumulator bottles, 6 sheave crown, 75 ton McKissick tubing block  Price:$105,000

Manufactured 1991 (not used until 2005), 38 x 10 double drum, p/b 8V92T diesel engine (430 hp), Allison 750 transmission, 18" twin disc cloutches, 48" double disc brake assist on main drum, water mist on both mai and sandline drums, main drum has 7/8" Lebus grooving, 104" x 240,000# mast, tubing board, rod basket, 13,500" of sandline, 875" of 7/8" swedgeline, 100 ton SOWA block, all mounted on tandem axle trailer  Price: $375,000  PRICE REDUCED:  $325,000

1980, 475 hp, single drum (new), reworked, 96" x 205,000# hydraulically raised mast, 6 lines,  crown block: 3 new sheaves blocks and bearings, racking board, guide wires, (2) hydraulic hoist, weight indicator, block, elevator links, fall safety device, work platform, mounted on 4 axle carrier with Detroit Series 60 diesel engine, Allison transmission, rig in excellent condition and has been well maintained, ready for use   PRICE: $115,000

SKYTOP BREWSTER RR400(Ref#13190T) Mounted on 4 axle carrier, single drum drawworks, 8x7 disc assisted brakes, tubing board, Cat3406B engine, Allison 860DB transmission, 100 ton McKissick block, Foster 58-92R tongs, misc hand tools, approx 36" base beam for rig, ready to work  Price:  $110,000

Manufactured 1976, 50 Series Detroit engine, 4460 Allison auto transmission, 96" x 180,000# Skytop derrick, 100 ton McKissick blocks, 7000" of 9/16" sandline, BJ tubing tongs, Guiberson air slips, 2-3/8 and 2-7/8 elevators, rod wrench, rod elevators, weight indicator, lubricator pump, misc tools  Price:  $320,000

72’ x 140,000# hook load telescoping mast, single tubing, double rods, self guyed, 36” x 8” double drum drawworks, Detroit Series 60 engine, Allison 6750 transmission, Level IV in 2005  Price:  $490,000 CDN  (approx. $390,000 USD)

500 hp, manufactured 2007, Pemco 104" x 225,000# derrick, double triple, 100 ton McKissick blocks, BJ style tubing tongs, rod tongs, rod basket, 8"3" bales, 16,993 miles on truck, 4016 hours, all handling tools

Detroit 8V-71N Diesel Eng, Allison CBT-4460-1 Trans.  Service King 96" x 180,000# Hydraulically Raised & Scoped W/5-Sheave Crown, Dbl Tubing & Triple Rod Boards.  Mtd On Franks 4-Axle Carrier W/Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Floatation Front Tires  Price:  $350,000

Refurbished 2017, 4 lines, 96’ x 205,000# mast, 8V71 Detroit engine, mounted on CCC, 75 ton McKissick blocks, tubing board, rod basket, work platform, rigged up and working in field  Price:  $295,000

Manufactured 1977, 72’ x 125,000# derrick, 8V71 Detroit engine (rebuilt), Allison 750 transmission, 6500’ of new 5/8” sand line, tubing line new, drum brakes new, new style McKissick blocks, working daily  Price rig only:  $157,500

38x10 drawworks, 4 axle Crane Carrier, 6V92 Detroit diesel engine, 4460 Allison tranmission, 96" x 133,000# mast with 4 lines, no block, no sandline, no rod board, no monkey board, needs a little work  Price:  $94,500

Double drum drawworks with hydromatic brake, 10" brakes, 96" x 180,000# derrick, mounted on 4-axle PEMCO carrier with hydraulic support legs, 8V71 Detroit, 4460 Allison transmission, Spicer 784 split shaft gearbox, 250 hp right angle drive, 650" of 7/8" tubing line, 8000" of 9/16" swab line, 100 ton Sowa block, hydraulic winch, hydraulic weight indicator, 84" links, 2-3/8" and 2-7/8" tubing elevators, BJ tubing slips, Foster 5893R power tongs with lift in derrick, rod hook, rod stripper, rod elevators, wrenches, transfers, rod fishing tools, misc hand tools and connections  Price:  $140,000

CAT 3406 Diesel Eng, ALLISON HT-750 Trans., 96"H 180,000# Telescoping Mast, Hydraulically Raised & Scoped W/4-Sheave Crown, Dbl Tubing & Triple Rod Boards, Adjustable Height Work Platform.  Mtd On FRANKS "Cruiser" 4-Axle Carrier W/NEW Sgl-Man Cab, (4) Hyd Leveling Jacks, Hyd Utility Hoist, Air & Hyd Controls, Flotation Front Tires  Price:  $300,000

Manufactured 1974, double drum drawworks,  double triple 96" x 180,000# derrick with a hydromatic. The rig has working line with heavy traveling block and approx. 12,000" 9/16 sand line. Mounted on Skytop carrier with tandem steering and rear ends 4 axles W/ tag axle, 4 leveling jacks, powered by an 8V-71 with a Allison 4460 transmission, (note transmission was overhauled in early 2000"s) and the engine has a new head on right bank. The rig has two leveling jacks on the rear and two leveling jacks on the front which are located right behind the steering axels. Tooled out with hydraulic rod and hydraulic tubing tongs, air slips, rod and tubing elevators, hand tools and misc over items. PRICE REDUCED:  $115,000

Double drum, double pole 8-5/8" x 7 x65", 6,000" of 2-7/8" line, mounted on 1974 International Model 2070A tandem axle truck with Detroit diesel engine, leveling jacks, 454 Chevy propane engine on deck with 250 gallon propane tank, automatic transmission for smooth operating, Foster 58 power tongs, Guiberso air clips, tooled for tubing and rods, will do 6000" of 7" tubing, currently working    Price:  $89,500

10 x 13 pole, double Drum, Franks 33” air over grease, brakes in good shape, 7/8” tubing line, tubing blocks, tong pressure adjustment, hi/low on tubing, air slips control, master kill on drawworks, Foster 36 with 8’ lift ram, air backup, swing around tong rack, mounted on 2001 Freightliner F80 truck, Cat C12 Series 3125, Fuller 9-speed transmission, PTO, winch for pole scope Tulsa 48, blocks raise pole, dual fuel tank, dual battery, 50 gal hyd tank, toolboxes, hydraulic outriggers, BJ rod tongs, ¾” and 7/8” heads, tools, swabs, extra tongs, orbits, drilling head  Price:  $242,500

Built 1979, 65’ 10” x 13” poles hydraulically raised, block line, sandline, winch line,  hydromatic brake, new Detroit 8V71 engine (installed by Stewart Stevenson) and new Allison 750 transmission, mounted on 4-axle carrier with single man cab, hydraulic leveling jacks, hydraulic utility hoist, air and hydraulic control and floatation tires, sand pump, two bailers, Foster tongs, 2 bailers, sand pump, rod and tubing elevators and all tools  Price:$94,500

Double drum (second drum is removed, rig is running as single drum), hyd pole and down riggers, mounted on 1990 Crane Carrier, 9 sp Eaton Fuller transmission, 100,000 miles, 8 x 10 telescoping poles, 3/4” cable, no tooling  Price:  $52,500

10 x 13” pole, single drum, mounted on 1980 Brigadier 9500 Series truck with 671 inline Detroit, drop box, travelling blocks, tubing lines, hyd jacks, no tooling, sitting since 2000  PRICE:  $49,500

Cable Tool Drilling and Completion Rig, 60" double poles rated to 150,000#, 5000" drill capacity, 10,000" pull capacity, propane Waukesha 145 engine, 500 gal propane tank, trailer moutned with International 4300 truck, last drilled 2012, 2300" drill line on drum, 3500" on spool casing drum, heavy block sandline drum, cat heads each side, tooling, spare engine  Price:  $72,500

400’ of 7/8” block line, 9/16” sandline drum (no cable), 2000’ of ¾” drilling drum, 3 McKissick sheaves, air clutches and controls, mounted on 1961 Mack truck with 250 hp Cummins engine, older rig but runs good.  Includes elevators, oil saver pump, no BJ tongs, currently working.  Price:  $87,500 - Pennsylvania

Triple drum, friction clutch, cathead (sandline holds 2400’ of 5/8” line), mounted on tandem axle Chevy truck with 427 gasoline engine, 8-5/8” x 45’ single pole, new tires, power steering, wireline unit, good usable rig for shallow oil/gas lease, drills, workover, swab capabilities, no tools  Price:  $112,500 - Oklahoma

To ensure our website performs well for all users, the SEC monitors the frequency of requests for SEC.gov content to ensure automated searches do not impact the ability of others to access SEC.gov content. We reserve the right to block IP addresses that submit excessive requests. Current guidelines limit users to a total of no more than 10 requests per second, regardless of the number of machines used to submit requests.

The Workover Rig Derrick hand, performs and maintains service on oil wells as part of a 3-5 person crew of a workover rig. Works closely with various field personnel as a team. Maintains and implements all parts of a rig, demonstrating knowledge of all aspects and equipment on site.

Contango Oil & Gas Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, gender identity, sexual orientation, age, genetic information, or pregnancy, status as a protected veteran, status as a qualified individual with a disability, or any other status protected by federal, state or local law.

ND Energy Services is looking to hire experienced Workover Rig Derrickhands with a strong work ethic and willingness to learn and grow with the company.

Position SummaryThe Workover Rig Derrick hand, performs and maintains service on oil wells as part of a 3-5 person crew of a workover rig. Works closely with various field personnel as a team. Maintains and implements all parts of a rig, demonstrating knowledge of all aspects and equipment on site. Essential FunctionsPerforms all well servicing tasks from an elevated position (rod basket or tubing board)Assists in rigging up or downPicks up or laying down tubingWorks the floors or operating the rig when necessaryOperates a Company vehicleComplete time sheets and work tickets accuratelyPerform physical labor which may require heavy lifting (50lbs +),bending, stooping, pushing and pulling, etc.Attend monthly safety meetingsRequirementsHigh school diploma, GED or equivalent1-2 years of Derrickhand experienceBasic oilfield well servicing experienceBasic problem-solving and organizational skillsAbility to perform duties in adverse weather conditionsAbility to effectively communicate, both oral and written - Excellent customer serviceAbility to bend, stoop and lift objects of up to 75 pounds for extended periods of timeAbility to multi-task and work in a fast-paced environmentPreferred Qualifications2+ years Derrick hand experience2+ years related oilfield experienceTo ApplyComplete our employment application and upload your resume to the Careers page of our website at www.contango.com or go directly to our jobs page at http://contango.applicantpro.com/jobs/.

We OfferContango Oil & Gas Company offers competitive salary, cash bonus and stock incentive bonus plans. The Company also offers a comprehensive benefit package which includes medical/dental/vision plans, company paid life and disability insurance, 401(k) retirement plan contribution matching with 100% immediate vesting, paid vacation and sick time, and much more. International ConsiderationsExpatriate assignments will not be considered. Contango Oil & Gas Company regrets that it is unable to sponsor employment Visas for this position. EEO StatementContango Oil & Gas Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, gender identity, sexual orientation, age, genetic information, or pregnancy, status as a protected veteran, status as a qualified individual with a disability, or any other status protected by federal, state or local law.If you are a qualified individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to use or access Contango"s online application as a result of your disability. Please email HR@contango.com or call 405-252-5709 to request reasonable accommodation(s).Job Posted by ApplicantPro

When you"re seeking the field flexibility to complete your drilling faster, easier and safer, count on Geoprobe® drill rigs engineered for versatility and manufactured for reliability. Industry leaders depend on our ongoing commitment to innovation and industry-leading customer support to advance their business ahead of the competition. Digital readouts providing instant feedback, enhanced safety features, easy operation, and availability of training options mean veteran drillers find their jobs simplified while new drillers build confidence, making them productive as they"re quickly coming up the learning curve.

Whether you’re facing consolidated materials, glacial till, or backfill rubble, quickly complete complex holes to greater depths with the powerful GV5 50K sonic head on our line of sonic drill rigs. Engineered by Geoprobe® to advance up-to 12-inch tooling, the GV5 produces torque required to maintain rotation in tight formations – all backed by a 2-year warranty.

Increase depth advancement and recovery speeds while minimizing waste with the 8150LS sonic drilling rig engineered for driller safety, sampling speed, and operation efficiency.

Geoprobe® combination drill rigs possess the power to tackle difficult site conditions combined with the versatility to exceed subsurface sampling expectations to equal business growth in both direct push and rotary drill rig applications.

Combine geotechnical augering and high-speed rotary with advanced direct push capability to offer additional services to your customers, quickly going from coring rock to pushing CPT - all in one drill rig.

From crowded street corners to far removed places, tackle various environmental, geotechnical and exploration applications with a single machine combining rotary drilling and direct push, saving time and money required to mobilize multiple drill rigs.

In a geotech industry ruled by rate-per-foot, Geoprobe® geotechnical drill rigs capable of swiftly sliding from rotary to automatic drop hammer, even to CPT or direct push — without having to move drill mast or machine — position you for increased production and profit.

Save time and effort swiftly sliding the innovative centerline head side shift into position for rotary, automatic drop hammer, event CPT or direct push. No need to move the geotechnical drill or drill mast on the compact, off road drill rig.

Maximize the value of your investment by choosing a CPT drilling platform best suited to your specific business model. Whether you’re seeking a dedicated CPT drilling rig or a versatile drilling rig to run a variety of applications, you’ll find the combination of features to push your business ahead.

Generating a name for itself and redefining the way sites are investigated in the environmental industry, Geoprobe® continues to advance direct push drilling through continued innovation of its line of high-quality, hydraulically-powered direct push drilling rigs

Featuring a proven GH63 percussion hammer and able to use 5-foot tooling, the 6011DT direct push drill rig is still being sized to slip into small spaces.

Key Energy Services-A dynamic and well respected company with a mission to be a leading global well intervention and production enhancement service company. We are the largest provider of onshore well service rigs in the United States and one of the leading onshore, rig-based well servicing contractors in the world.

Responsible for all work performed for the rod basket and tubing board (transferring rods and tubing from the vertical racks to the elevator), performs servicing on the well.

Key Energy Services (Key) is an equal opportunity employer. Key does not discriminate against any applicant or employee based on race, color, religion, sex, sexual orientation, disability, national origin, age, genetic information, military status, status as a Vietnam-era or special disabled veteran, or any other basis protected by federal, state, or local laws.

Key Energy Services-A dynamic and well respected company with a mission to be a leading global well intervention and production enhancement service company. We are the largest provider of onshore well service rigs in theUnited Statesand one of the leading onshore, rig-based well servicing contractors in the world.

Responsible for all work performed for the rod basket and tubing board (transferring rods and tubing from the vertical racks to the elevator), performs servicing on the well.

Key Energy Services (Key) is an equal opportunity employer. Key does not discriminate against any applicant or employee based on race, color, religion, sex, sexual orientation, disability, national origin, age, genetic information, military status, status as a Vietnam-era or special disabled veteran, or any other basis protected by federal, state, or local laws.