workover rig job description free sample

Description :Ran floors, picking up the pipe, picking up rods, pump change-outs, trip pipe, run tubing board, assist driller, hammer, setup pump, rigging up, rigging down.

Objective :Experienced Floor Hand with over one plus years of oil field experience. Very familiar with several different types of drilling rigs and workover rigs. Also skilled at welding and other trades. Seeking a career where my diverse experience and training in management, leadership, and teamwork can help support the company"s vision.

Summary :Floor Hand experienced in most operations performed during completion and remedial work including drill outs with snubbing unit, drill outs with the hybrid tool and annular, TCP operations, remedial operations such as cleanouts, nitrogen kickoffs, cased hole fishing, cement, and gel squeeze jobs, and plug and abandon operations. Seeking a factory worker position with a reputable factory in order to utilize physical work capabilities as well as knowledge of basic factory operations.

Description :Repaired and tested air lines, hydraulic lines by replacing or affixing new connectors and insured that the safety catchline was in good condition.

Objective :Works under the direction of the Rig Operator/Driller. This individual is part of a crew that is responsible for the maintenance and day to day operation of the service rigs and/or the drilling rig.

Headline :Rig Hand is responsible for maintaining the rig in a safe and efficient manner. This includes ensuring the rig is properly maintained, repaired, and serviced by qualified staff. Ensure that all maintenance schedules are met and that all scheduled work is completed within acceptable time frames.

Objective :A Water Pipe Installer and as a Rig Hand in industries including Business Services, and Oil and Gas Extraction. Skills and experiences include machine operation, equipment operation, welding.

This is a real resume for a Rig Operator in Odessa, Texas with experience working for such companies as J & M Well Services, Cc Forbes. This is one of the hundreds of Rig Operator resumes available on our site for free. Use these resumes as templates to get help creating the best Rig Operator resume.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Heavy equipment, also known as heavy machinery, refers to heavy-duty trucks that are specifically built to complete building works, most often earthwork activities or other major construction projects. Heavy machinery works by multiplying the amount of input force added to force exerted, allowing jobs that would otherwise take hundreds of workers and weeks of labor to be completed in a fraction of the time.

Job safety analysis is the process of analysing the occupational safety at a workplace. It measures factors like safety wellbeing and health of employees. It also aims to solve conflicts that may further lead to the assault of an individual either by a colleague or the employer.

Here"s how cdl is used on rig hand resumes:Learned more of forklift operation as well as extensive CDL Driving experience.Skills UsedOperation of various equipment and tools.

Here"s how h2s is used on rig hand resumes:Worked & certified around H2S Accomplishments I was acknowledged multiple times in big safety meetings for showing my awareness of safety.

Heavy equipment, also known as heavy machinery, refers to heavy-duty trucks that are specifically built to complete building works, most often earthwork activities or other major construction projects. Heavy machinery works by multiplying the amount of input force added to force exerted, allowing jobs that would otherwise take hundreds of workers and weeks of labor to be completed in a fraction of the time.

Here"s how heavy equipment is used on rig hand resumes:Remove and replace well heads, able to work safely around heavy equipment and flammables, operate machine shop tools safely.

Job safety analysis is the process of analysing the occupational safety at a workplace. It measures factors like safety wellbeing and health of employees. It also aims to solve conflicts that may further lead to the assault of an individual either by a colleague or the employer.

Here"s how job safety analysis is used on rig hand resumes:Experience with safety meetings and Job Safety Analysis as per company standard and policies.

Here"s how safety meetings is used on rig hand resumes:Help co-workers repair rig, Participate in daily safety meetings to help avoid incidents, Help rig stay clean and keep drilling

Zippia allows you to choose from different easy-to-use Rig Hand templates, and provides you with expert advice. Using the templates, you can rest assured that the structure and format of your Rig Hand resume is top notch. Choose a template with the colors, fonts & text sizes that are appropriate for your industry.

Here"s how flow lines is used on rig hand resumes:Monitored issues with the well such as closed valves along the flow lines in order to prevent pressure buildup.

Here"s how general maintenance is used on rig hand resumes:Perform general maintenance of draw works, load and off-load pipe and assists in rig movement.

Here"s how swab is used on rig hand resumes:Help on Swab Rig/Fix Leaks/Hook up Wells/Roustabout/Read Meters/Keep Records of Wells/Walk Pipelines/Soap & Flow Wells/Maintain the Running of Four Compressors

Must have the ability to work on an oil and gas site under direct supervision. Responsible for successfully supporting operations based around work over rig operations.

II. Essential Duties and Responsibilities include the following. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned, this position is diverse and job duties may vary on a daily basis

•This position’s schedule is rotational but can vary greatly, to include any day of the week and at any times. This includes holidays, weekends, and various timeframes daily. Certain operations cannot be completed during a single daylight period and must be continued without interruption, over several consecutive days. Such operations are referred to as 24-hour operations and require multiple crews to operate the rig consistently over 24-hour periods. This position can be required to work all shifts for these operations.

Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.

The following is a list of seasonal work gear worn by drilling rig workers. Savanna supplies rig employees with coveralls, hard hat, safety glasses & impact gloves (1 pair).

Drilling rig crews are generally made up of six (6) people: Rig Manager, Driller, Derrickhand, Motorhand, Floorhand, and Leasehand. Each crew works 12 hours shifts as the rig operates 24 hours per day, and each position is vital to the operation of the rig.

Work in the oil and gas services industry is seasonal. Because of the weight of rigs and their equipment, and the remote location of wells, these locations are often only accessible when the ground conditions can tolerate heavy loads. Therefore, wells are typically drilled and serviced in the winter when the ground is frozen solid, or in the summer, when the ground has thawed and dried sufficiently. During the spring and fall, when the ground is in a transitional state, it is too soft to move equipment on and easily damaged. For this reason, provincial governments implement “road bans” prohibiting heavy loads from operating in certain areas. During this time, rig work is slower, and many rigs are shut down and their crews sent home. Be prepared to be off for anywhere from 6 to 12 weeks without pay during this time. However, rigs that are shut down are usually in need of maintenance, and there may be opportunities for employees who would like to help in this regard. Employees may be eligible for Employment Insurance benefits during seasonal shutdowns.

To work on a drilling rig, you must be able to get to and from all of your work locations.  As drilling often occurs in remote areas, having reliable transportation is considered mandatory for non-camp locations. Drilling rigs commonly operate 24 hours per day, 7 days per week with either three crews working 8 hour shifts or two crews working 12-hour shifts. Most often day crews and night crews will alternate weekly, so each crew has a chance to work during both the day and night. Most crews will work 14 days straight with 7 days off in-between. The typical living situation while working falls into three categories: Non-Camp, Full Camp and Texas Camp.

Non-Camp: When the rig site is near a town, non-camp conditions normally apply. Crews will stay in hotel rooms and receive a per day living allowance for food and accommodation. The living allowance is paid out on your pay cheque based on days worked, therefore you will need to be able to pay for your food and accommodation out of your own pocket.

Full-Camp: When a rig site is in a remote location, crews may stay in a full camp. In a full-camp all food and full accommodation is provided. Once at the camp, the crew travels to and from the rig in the crew truck. Almost all camp work is available in the winter only.

Texas Camp: These camps are typically located nearby the rig location.  Crews are responsible for supplying their own bedding, cooking supplies, groceries and toiletries.  While staying at a texas camp, a daily allowance is provided for food and toiletries.  The living allowance is paid out on your pay cheque based on days worked, therefore you will need to be able to pay for your food and toiletries out of your own pocket.

Once you have completed your orientation, you will immediately receive any other necessary training. This involves Workplace Hazardous Materials Information System (WHMIS) and Transportation of Dangerous Goods (TDG), along with an in-depth General Safety Orientation. This training is mandatory and provided by Savanna at no cost to the employee. Job-related, hands on training is conducted in the field through Savanna’s Rig Mentoring Program.

While it is not mandatory to have this certification, each service rig crew is required to have two members who are certified in Standard First Aid with CPR level C. Therefore, obtaining a certification beforehand is a great way to improve your chances of being hired.

To write an effective rig manager job description, begin by listing detailed duties, responsibilities and expectations. We have included rig manager job description templates that you can modify and use.

Our company is looking to fill the role of rig manager. If you are looking for an exciting place to work, please take a look at the list of qualifications below.

Must be proficient in well control, sustains the upkeep of rig equipment and suggests improvements, and maintains the paperwork (including morning reports, IADC daily log report)

Plans various rig activities such as repairs, daily maintenance, and preventative maintenance, major repairs to guarantee efficient drilling and minimize downtime of the rig

Ensures that crew members are properly trained and familiarized with standard operating procedures to include, but not limited to, proper care and maintenance of the rig and drill string, including lubrication of equipment and housekeeping

Our innovative and growing company is searching for experienced candidates for the position of rig manager. To join our growing team, please review the list of responsibilities and qualifications.

Responsibilities for rig managerEnsure that all required paperwork and approvals in connection with payment for ordered supplies of materials, equipment and services are carried out

At all times keep the Purchasing Manager, the management at the head office and the staff at the base office (if any) and on board the rigs well informed about the development of ordered supplies of materials, equipment and services

Maintain all required records and documentation at rig site and produce accurate and timely reports on all aspects of rig operations and personnel matters

Develop rig move plans and manage rig moves, taking personal responsibility for safely rigging-down & rigging-up of the drilling rig, camp and associated equipment

Take responsibility for all HR matters at rig site, including training and development of expatriate and national staff in the rig crews, particularly with regard to on the job training

Our growing company is hiring for a rig manager. If you are looking for an exciting place to work, please take a look at the list of qualifications below.

Our growing company is looking for a rig manager. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.

Learn all aspects of the operation of the Dyno and Horizontal Drilling Machine (HDM) including the rig, HPU, controls, data acquisition, pump truck, test fixtures

Our company is hiring for a rig manager. Please review the list of responsibilities and qualifications. While this is our ideal list, we will consider candidates that do not necessarily have all of the qualifications, but have sufficient experience and talent.

Manage engineering design for all New Rig Construction, Refurbishing and Maintenance activities, including scope of work, drafting oversight and final drawing issuance

The services that AVANI TECHNOLOGY SOLUTIONS INC provides to User is subject to the following Terms of Use ("TOU"). AVANI TECHNOLOGY SOLUTIONS INC reserves the right to update the TOU at any time without notice to User. The most current version of the TOU can be reviewed by clicking on the "Terms of Use" hypertext link located at the bottom of our Web pages.

The job description of an oil rig electrician entails installing, troubleshooting, repairing, maintaining, commissioning, and testing of electrical equipment and systems on oil rigs.

A rig sparky or oil rig electrician is usually employed by the maintenance department of a well and a drilling service contractor of petroleum-producing companies.

As with all electricians, electricians working on oil rigs are bound by the Electric Code of Practice; progression to higher positions is possible with experience and additional licensing examinations.

Job Summary: Working on an oil rig requires long and difficult days. Rig electrical workers are usually on a roster system; they often will work outdoors in all types of weather, or underground, and are part of a crew.

Are you trying to land a job on a drilling rig and start a career in the oil and gas industry? Like you - I started at the bottom and over a 15-year career progressed from an entry-level position to a project manager earning a six-figure income $$$,$$$. After this, I worked as a Recruiter and I am now an Executive CV / Resume Writer so have a very good understanding of the environment and what it takes to progress a career in the international oil and gas industry. This article will help you land an entry-level position like roustabout, operator, rigger or trainee graduate. It also contains a comprehensive guide of all the positions on a rig and descriptions of various types of rigs so that you can choose a career direction.

The Oil & Gas industry is extremely competitive with often 100"s candidates applying for 1 job. This article will give you an advantage over other candidates because of the insider information it contains. If you read to the very bottom you will find a list of 42 operating companies and 31 agencies that you can contact. But make sure you read section 5. CV / Resume Requirements to ensure your CV / Resume is ATS compliant and utilises Teal and Grammarly to give you the best chance of success.

It is a realistic option for you to break into the industry, it just requires patience and for you to apply everywhere necessary but make sure your CV is looking its absolute best before you apply, if not, it’s a wasted exercise... You only have one chance at making the right first impression!

Jobs on the rigs will include cleaners, painters and roustabouts (both entry-level), riggers (slingers), floor hands, catering staff, crane operators, welders, electricians, mechanics, motormen, engineers, chief engineers, derrickman, assistant drillers, drillers, tool pushers, warehousemen, medics, (HSE) safety supervisors, ballast control men, dynamic position (DP) operators, barge operators, barge engineers, offshore installation managers (OIMs), rig managers and rig superintendents.

All these positions except entry-level will require some type of prior experience and specialist training unless you just get very, very lucky. Below is a guide for a more in-depth look at the permanent positions on a rig.

If you want to work overseas, understand that drilling contractors seldom if ever send lower echelon people overseas. An overseas crew usually have Expatriate Rig Managers, Tool pushers, Drillers, Assistant Drillers, Crane Operator, Barge Engineer, Electrician and Mechanic. Maybe even a few more, maybe a few less, it varies from company to company, rig to rig, job to job. All lower positions will be locally hired!

You are not going to see expatriate roustabouts, cleaners, painters, riggers or floor hands going overseas and working a 28/28 schedule because the country where the rig is working will use (nationals) for those jobs. Often local governments stipulate that a certain percentage of the crew needs to be national so expatriate positions are reduced.

To work offshore you will need to pass a thorough medical examination and present your employer with a valid medical certificate. Various countries require slightly different medicals but they are all similar and last around one hour. The following description is for the UK and Norwegian offshore medical, however this medical is good to use worldwide because Norwegian standards are the highest.Completion of a medical questionnaire.

There are many other Oil and Gas courses that are job-specific but once you are on board with a new employer they often plan your training and keep you up to date.

You can also identify keywords for your CV / Resume by using Teal (It"s Free). Teal is the secret weapon that I"ve been happily using for the past couple of years to help my clients identify keywords for their CVs, Resumes and LinkedIn profiles - and believe me the tool is mind-blowing. Teal is a full-proof solution that easily stores jobs that you"re interested in, tracks your progress, including notes and also automatically highlights important keywords for every job you save. It"s like an online excel sheet on adrenalin and did I forget to mention, it"s free to use!

Laid out below are the basic jobs on an offshore drilling rig starting with the lowest level of the worker through to the Offshore Installation Manager (OIM) also including the support staff after the OIM.

Roustabout - The job of roustabout is about the easiest entry level job to get. It involves a lot of hard manual labor and long work hours. Roustabouts typically are involved on the main deck with painting and sandblasting, unloading pipe and other kinds of physical work. During breaks they also fill in for the roughnecks on the rig floor.

Roughneck - Higher up are the roughnecks also known as floor hands who do the jobs on the rig floor. The job of the roughnecks is to make connections in the drill pipe using pipe tongs or an automatic device known as an “iron roughneck”. Roughnecks “trip pipe” joints of drill pipe into and out of the hole when drill bits, etc, need to be changed.

Derrickman - Aligns and manipulates the sections of pipe or drill stem from a platform on the rig derrick during the removal and replacement of strings of pipe, or drill stem and drill bit. Assist in setting up, taking down and transporting drilling and service rigs. Supervises the roughnecks. This job entails working at height in the derrick usually at 170ft.

Crane Operators - Responsible for all crane operations on the rig and to and from the supply boats. Cranes are used to load supplies, such as casing, pipes and rig equipment, onto the oil rig. Crane operators also assist in general labour around the rig. Crane operators supervise the roustabouts and the crane operator assistant. This is a senior deck crew position.

Assistant Driller (AD)- Runs the work crew and takes information from the driller and gives it to their crew. While the assistant driller acts in a predominately supervisory role, they may also work alongside the roughnecks to run machinery. ADs train roughnecks to recognize abnormal well conditions in order to prevent leaks and rig blowouts.

Driller - A driller is a person in charge of the rig floor and of overseeing the drilling of an oil well. They directly control the rate of drilling and it is a skilled position that requires extensive knowledge of rock types and drilling procedures. Drillers must be highly knowledgeable and make real-time decisions in a calm and controlled manner.

Tool Pusher - On a land drilling rig the tool pusher may be the rig manager and responsible for all operations, but on drillships and offshore drilling rigs, tool pushers are in charge of the drilling department and report to the Offshore Installation Manager (OIM).

OIM (Offshore Installation Manager) - is the most senior manager of an offshore installation. If an emergency were to arise they control the situation and manage the response. He is responsible for all personnel and operations and reports to the Rig Manager who is onshore.

Rig Electrician - They are responsible for ensuring that all electrical systems on the rig are functioning properly. Duties include repairing, maintaining, installing and operating all electrical equipment on the rig. They need to be competent in the use of electricity in hazardous areas and communicate with the rig crew.

Motorman / Rig Mechanic - The primary job function is oil rig equipment maintenance. The motorman checks the rig motors and other mechanical equipment on the rig for proper functioning and takes all necessary steps including lubrication and regular maintenance to render equipment in a working condition.

Barge Engineer - The Barge engineer is in charge of control room operations, including anchor handling, rig stability and supply vessel operations. A barge engineer should have a good knowledge of Coast Guard operations and water safety. Most barge engineers have experience as master merchant in the Navy.

Radio Operator - Efficiently communicating vital information between land bases, rigs, boats and helicopters. Sets up, operates and maintains sensitive equipment to establish verbal, data and encoded interactions regarding emergency situations, weather conditions and important job directives.

The most commonly used rigs in the industry are Jack-ups, used to drill in shallow water, Semi-submersibles used to drill in deep water and land rigs which are moved on trailers and spotted on concrete bases on land, I will also mention fixed platforms which can have drilling facilities on board. The most expensive to run is the semi followed by the jack-up and finally the land rig. This is all down to the size, equipment differences and also the difficulty with logistics to and from the rig. Each rig will have similar drilling equipment on board but some will vary due to the nature of the rig.

These types of rigs come in a variety of sizes depending on the type of well you will be drilling. The rig breaks down into many parts so that it can be transported with trucks and trailers. First, a concrete base will be laid at the location of the well and a pit will also be dug next to the location for the cuttings from the well to be temporarily dumped into. These rigs can be assembled very quickly usually within 3-7 days and can be transported in as little as 12 truckloads.

These rigs are towed into location and then jack their 3 legs down until the legs reach the sea bed. Some larger rigs can have up to 5 legs. The rig will then raise itself out of the water to the deserved height. Jack-ups are good in water depths of up to 400ft (120m) and can be found most commonly in the North Sea because of the seas shallow nature. Once settled the Jack-up rig has a static base in which to drill from. Occasionally rocks has to be placed around the legs to keep the platform from sinking or tilting into the seabed.

Sit on pontoons and float high above the water. The ballast tanks can be adjusted to raise or lower the rig and they can be moved under their own power or towed into place. Once in place the rig will deploy its six anchors and they will be tensioned accordingly to move the rig over the drilling location. Semi-Submersible rigs can be used in water depths from 200ft – 10,000ft (60m – 3000m). The main difference with drilling from a Semi is that the rig is not static and is constantly moving with the swell, therefore the drill pipe moves up and down with the swell. The rig is fitted with heave compensators which keep the drill pipe firmly at the bottom whilst drilling. When the rig moves upwards the heave compensators push down the drill pipe and vice versa.

A drillship is a mobile offshore drilling rig where a mono-hull ship, catamaran, triple-hull ship, or barge is adapted or built for use as a platform. After reaching the well position, the drillship first gets into position with the mooring system or dynamic positioning (DP) system and then begins to drill a well. From the action of wind and waves, the drillship will encounter a heaving motion and sway on all sides, hence, it needs measures such as a drilling string heave compensation device and swing angle reduction device as well as dynamic positioning (DP) to guarantee displacement of drillship within the allowable limits, so as to properly drill a well.

Fixed drilling platforms offer stability but not mobility. Today they’re usually used to tap shallow, long term oil deposits. These platforms are permanently anchored directly to the seabed with the use of a steel structure known as a “jacket”. This rises from the seabed to support a surface deck that is above the ocean. The jacket provides the rig’s sturdy base and holds everything else out of the water, while the drilling modules and crew quarters are located on the surface deck. They can drill to depths of about 1,500 feet below the surface but are expensive to build, so they usually require a large oil discovery to justify their construction.

ENSCO, Dallas, TX, USA
One of the leading offshore oil and gas drilling contractors in the world with a fleet of 56 offshore drilling rigs and 27 oilfield support vessels.
 Work Area: Gulf of Mexico, Australia, Asia, Latin America, the North Sea, the Middle East and West Africa. http://www.enscous.com/\

FEMCO, 
Far East Marine Company, Sakhalin Region, Russia
 - A regular participant of all oil and gas development projects in offshore Sakhalin who plans to extend the sphere of theor traditional fleet activities as well as mastering new opportunities. 1 rig working in the Far East, 3 in the Persian Gulf. http://www.femco.ru/

Helmerich and Payne, Inc, Metairie, LA, USA
Owns and operates12 platform rigs and manages 4 offshore management contracts in the Gulf of Mexico and the West Coast Santa Barbara Channel. H&P"s diverse offshore fleet consists of deepwater tension leg platform (TLP) rigs, self-moving rigs and traditional self-contained platform rigs.
 Work Area: Gulf of Mexico, West Coast California. http://www.hpinc.com/

Mannai Offshore, Doha, Qatar
Operates a fleet of vessels, jack-up accommodation rigs and early production facilities that provide a wide range of specialized services to the offshore oil and gas industry.
 Work Area: Offshore Qatar and surrounding areas. http://www.mannai.com/

Nabors Industries, Houston, TX, USA
The largest land drilling contractor in the world. One of the largest well-servicing and workover contractors in the United States. A leading provider of offshore platform workover and drilling rigs. A provider of ancillary well site services such as oilfield management, engineering, transportation, construction, maintenance and well logging.
 Work Area: Gulf of Mexico, Latin America and the Middle East. http://www.nabors.com/

Odfjell Drilling, Bergen, Norway
Owns and operates semi-submersible drilling rigs in the North Sea and is also a leading platform drilling contractor with operations on fixed and floating production platforms. http://www.odfjelldrilling.com/

Parker Drilling Company, Houston, TX, USA
A global drilling company providing drilling rigs, labor management and rental tools to the energy industry. Parker"s primary business segment is drilling rigs with 33 in the United States Gulf of Mexico and 46 internationally. The company’s international rig fleet consists of barge rigs in the Caspian Sea and Nigeria and land rigs in 12 countries.
 Work Area: Gulf of Mexico, Eastern Europe and West Africa. http://www.parkerdrilling.com/

Prosafe ASA, Tananger, Norway
World"s leading owner and operator of semi-submersible service rigs, the largest platform drilling contractor in Norway and a major owner and operator of floating production- and storage vessels outside the North Sea. http://www.prosafe.no/

Paterson UTI, INC., Houston, TX, USA
The second-largest provider of onshore contract drilling services to exploration and production companies in North America. The company owns 324 land-based drilling rigs and is also engaged in drilling and completion fluid services and pressure pumping services.
Work Area: Texas, New Mexico, Oklahoma, Louisiana, Mississippi, Utah and western Canada. http://www.corporate- ir.net/ireye/ir_site.zhtml?ticker=PTEN&script=2100&layo/

Petrolia Drilling ASA, Oslo
Owns and charters drilling vessels for offshore, deepwater oil and gas exploration and development drilling. It intends to continue to expand its current rig fleet through a strategy of acquiring, refurbishing and selectively deploying offshore drilling rigs and drillships on fixed-rate, long-term contracts. http://www.petrolia.no/

Precision Drilling, Alberta, Canada 
Maintains a fleet of 240 plus land rigs working in Canada and other countries, making the company one of the largest land drilling contractors in the world. Operations include drilling, catering, well servicing and oilfield rentals.
Work Area: Canada, Mexico, Columbia, Venezuela, Brazil, Argentina, the United Kingdom, the Netherlands, Germany, Egypt, the Middle East, China, India, Indonesia and Kazakhstan. http://www.precisiondrilling.com/

Pride International, Houston, TX, USA
One of the world"s largest drilling contractors providing offshore and onshore drilling, workover and related services in more than 30 countries. Fleet of 328 rigs includes 2 ultra deep water drillships, 12 semi submersibles, 35 jackups, 5 tender assisted rigs, 3 barge rigs, 21 offshore platform rigs and 250 land based drilling and workover rigs.
 Work Area: Gulf of Mexico, West Africa, the Mediterranean, Latin America, the Middle East, Australia and Asia. http://www.mardril.com/

Prosafe SE, Stavanger, Norway
Prosafe is the world ́s leading owner and operator of semi- submersible service rigs and a major owner and operator of floating production and storage vessels. http://www.prosafe.com/

Rowan Companies, Houston, TX, USA
A provider of international and domestic contract drilling and aviation services. Rowan has a marine division which has designed or built over one third of all mobile offshore jack up drilling rigs, including 22 operated by the company.
Work Area: Gulf of Mexico, East Coast of Canada http://www.rowancompanies.com/