workover rig weight indicator brands

Designed for use on small drilling units, the Deflection-type Weight Indicator is easy to move from rig to rig. The Weight Indicator system consists of a Gauge and a Deadline Diaphragm, connected by a high-pressure Hose. The deadline diaphragm converts line-load into a hydraulic pressure signal that is transmitted to the gauge. All system components fit inside a steel container for convenient, compact storage. Built-in handles make the entire system easy to transport.

Designed for use on small drilling units, the Deflection-type Weight Indicator is easy to move from rig to rig. The Weight Indicator system consists of a Gauge and a Deadline Diaphragm, connected by a high-pressure Hose. The deadline diaphragm converts line-load into a hydraulic pressure signal that is transmitted to the gauge. All system components fit inside a steel container for convenient, compact storage. Built-in handles make the entire system easy to transport.

Each weight indictor is shipped with 10 dials so moving it from rig to rig is easy and by simply changing a dial you can switch between drill line size and number of lines strung. Each Weight Indicator system consists of a Gauge, Deadline Diaphragm connected by a high-pressure Hose and a C-Clamp to attach the diaphragm to the drill line. The deadline diaphragm works on a deflection principle, the tighter the drill line gets the more force is applied to the diaphragm which converts the deflection to hydraulic pressure and sends that pressure to the 12”gauge which displays weight.

Weight Indicator has two pointers, one for weight and the other for sensitivity which is a 6:1 ratio and ideal for work such as setting packers and bridge plugs.

Versatile mounting options allows the weight indicator to be mounted just about anywhere on the drill floor but the diaphragm and Indicator gauge should be mounted at roughly the same height.

Panel-mounted as an integral part of drillers’consoles or box-mounted for portability, the hydraulic deadline Anchor-type Weight Indicators help the driller maintain consistent weight on bit for faster, more efficient, and more economical drilling.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

A deflection type weight indicator, also known as a line scale or clipper, is ideal for use with work over rigs and small drilling rigs. The complete boxed unit includes a 12” Gauge with interchangeable dials, hose and loadcell. The unit is highly portable and durable.

OILFIELD INSTRUMENTS WEIGHT INDICATOR SYSTEMS DRILLING INSTRUMENTATION ...Quality is Everything... Contact Rigchina Group Company for more information on our complete line of Oilfield Instruments, drilling fluids testing equipment and instrumentation for oil and gas industry. Call us today, or visit our website at www.rigchina.com © Copyright 1996-2016 Rigchina Group Company All rights reserved. Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL: http://www.rigchina.com Email: sales@rigchina.com SKYPE:RIGCHINA Add: No.80-82, Qiude Rd, West Cheng Industrial Estate, Yongkang city Zhejiang Province, China 321300

OILFIELD INSTRUMENTS DEADLINE ANCHORS & WEIGHT INDICATOR SYSTEMS 1 ANCHOR TYPE WEIGHT INDICATORS-INDICATOR SYSTEM Accurate and reliable indications of hook load and weight on bit are essential to drillers for the efficient control of ROP and hole direction. The hydraulic deadline anchor type weight indicator is a standard of the industry, and the weight indicators set the standards for quality, accuracy, and reliability against which all others are judged. RIGCHINA group has weight indicator models designed to work in conjunction with all industry-standard deadline anchors using either...

OILFIELD INSTRUMENTS 4:1 vernier movement for sensitive bit weight indications Main Technical Specification Part No. Description &Technical Parameters For deadline loads to 168,000 lb (750 kN) 10, 12, 14, and 16 lines strung E551 compression load cell or E543 Sensater tension load cell 16" indicator 9 MPa For deadline loads to 130,000 lb (580 kN) 10, 12, 14, and 16 lines strung E551 compression load cell or E543 Sensater tension load cell 16" dial indicator 7.49 MPa For deadline loads to 103,400 lb (460 kN) 10, 12, 14, and 16 lines strung E551 compression load cell or E543 Sensater tension...

OILFIELD INSTRUMENTS 6, 8, 10, and 12 lines strung E551 compression load cell or E543 Sensater tension load cell 16" dial indicator 5.2MPa For deadline loads to 22,500 lb (100 kN) 4, 6, and 8 lines strung E551 compression load cell or E543 Sensater tension load cell 16" dial indicator 4.2MPa 2. DEFLECTION-TYPE (CLIPPER) WEIGHT INDICATOR Model CDT-1013 For other drilling rig applications, including workover rigs, service rigs and pulling units that do not have conventional wireline anchors, RIGCHINA offers several weight indicator solutions. These include Clipper type weight indicators that...

OILFIELD INSTRUMENTS principle, the tighter the drill line gets the more force is applied to the diaphragm which converts the deflection to hydraulic pressure and sends that pressure to the 12”gauge which displays weight. The whole weight indicator system fits into the steel case for convenient, compact storage. Built-in handles make the entire system easy to transport. FEATURES: 12-inch gauge comes standard. Complete set of 10 dials included from 2-lines 7/8” to 8-Lines 1” Weight Indicator has two pointers, one for weight and the other for sensitivity which is a 6:1 ratio and ideal for...

OILFIELD INSTRUMENTS 2 WIRELINE WEIGHT INDICATORS Wireline Weight Indicators Ideally suited for used by wireline service trucks. Model CW-50 Wireline Weight Indicators Model CW-20 Wireline Weight Indicators FEATURES: -6” or 8.5” fluid filled gauge with dial faces available in decanewtons, pounds, kilograms, or dual scale. -Damper system allows operator to increase or decrease sentivity easily to monitor the minutest changes. -Each system is calibrated in our factory and is shipped precharged and ready to use. Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL:...

OILFIELD INSTRUMENTS -Calibration and line pull certificates are sent with the system. -Available in the following capacities: 1000, 2000, 3000, 4000, 5000, 6000, and 10,000 pounds. 3 DEADLINE ANCHORS Deadline anchors provide accurate weight measurements and secure deadlines Full line of all-weather, quality-built deadline anchors pull capacities from 30,000 to 160,000 pounds Constructed with top-quality steel and proof-tested to 150% of rated capacity, Deadline Anchors are highly accurate, super-strong anchors of exceptional reliability. RIGCHINA Deadline Anchors are designed to be used...

OILFIELD INSTRUMENTS Size of rig Derrick capacity in pounds Size of drilling wireline Number of lines strung Right or left hand model Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL: http://www.rigchina.com Email: sales@rigchina.com SKYPE:RIGCHINA Add: No.80-82, Qiude Rd, West Cheng Industrial Estate, Yongkang city Zhejiang Province, China

OILFIELD INSTRUMENTS Main technical specification for deadline anchor (Weight Indicator) Specification Mounting Model of Type of weight Welding(W) deadline indicator anchor Casting(C) Max deadline pulling force (pounds) Deadline Max load numbers (pounds) Left hand model Right Hand Left hand Crown block Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL: http://www.rigchina.com Email: sales@rigchina.com SKYPE:RIGCHINA Add: No.80-82, Qiude Rd, West Cheng Industrial Estate, Yongkang city Zhejiang Province, China 321

OILFIELD INSTRUMENTS Pull line Pull line Pull line Tel: 0086-579-87537698(switchboard) Fax: 0086-579-8753 696 Rev.2015 URL: http://www.rigchina.com Email: sales@rigchina.com SKYPE:RIGCHINA Add: No.80-82, Qiude Rd, West Cheng Industrial Estate, Yongkang city Zhejiang Province, China 321300

OILFIELD INSTRUMENTS WARRANTY Rigchina Group Company warrants its products to be free from defects in material and workmanship for a period of 24 months from the time of shipment. If repair or adjustment is necessary, and has not been the result of abuse or misuse within the twelve-month period, please return, freight prepaid, and correction of the defect will be made without charge. Out of warranty products will be repaired for a nominal charge. Please refer to the accompanying warranty statement enclosed with the product. RETURNS For your protection, items being returned must be carefully...

For other drilling rig applications, including workover rigs, service rigs and pulling units that do not have conventional wireline anchors, RIGCHINA offers several weight indicator solutions. These include Clipper type weight indicators that have a diaphragm that clamps to the deadline and Summarizer type weight indicators that have pad type load cells to directly sense mast loads.

Each weight indictor is shipped with 10 dials so moving it from rig to rig is easy and by simply changing a dial you can switch between drill line size and number of lines strung. Each Weight Indicator system consists of a Gauge, Deadline Diaphragm connected by a high-pressure Hose and a C-Clamp to attach the diaphragm to the drill line. The deadline diaphragm works on a deflection principle, the tighter the drill line gets the more force is applied to the diaphragm which converts the deflection to hydraulic pressure and sends that pressure to the 12”gauge which displays weight. The whole weight indicator system fits into the steel case for convenient, compact storage. Built-in handles make the entire system easy to transport.

Weight Indicator has two pointers, one for weight and the other for sensitivity which is a 6:1 ratio and ideal for work such as setting packers and bridge plugs.

Versatile mounting options allows the weight indicator to be mounted just about anywhere on the drill floor but the diaphragm and Indicator gauge should be mounted at roughly the same height.

By replacing conventional bourdon tube analog gauges, the LCI-90i Electronic Weight Indicator redefines the weight indicator category bringing next generation safety, accuracy, data acquisition and operational improvements to the well servicing weight indicator.

Our mini weight indicator systems, also called “midget indicators”, are ideal for small work over rigs, water well drilling rigs, and geothermal drilling. Our complete mini weight indicator systems are mounted in a compact box for convenient transport and are ready to use, right out of the box. No assembly or loading is required. The load cell attaches easily  to the rig without the need for a deadline anchor, and everything you need to install this system is included. Our indicators are designed to provide extremely accurate weight measurement, and the large dial is easy to read at a distance. The 6″ gauge is fluid-filled to resist shock, vibrations, corrosion and dial bounce. This hydraulic system is complete, needing no external power source.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Franks Double Drum back-in Wellservice/Workover unit. Lebus Grooved for drill line & sand line w / line type weight indicator, air clutches & controls and McCormick 300,000 lb weight indicator. 10,000′ New sand line.Tongs included, no tools.

Also ask me about my entire supply line of other oil patch equipment, New, Used and Surplus, Mud Systems, Vessels, Casing, Tubing, Swivel Rotary, Rods, Gas Turbines, Steel and Fiberglass Production Tanks, Backhoes, PumpJacks, Rods CNG Compression Packages, Tongs, Swivel Joints, Heavy Equipment, Drilling and Workover Rigs, Construction! Do you have any oilfield equipment that you seek to market? I Get Quality Oilfield New, Used and Surplus Equipment.