outboard hydraulic pump manufacturer

Norman Equipment has been a leading supplier of hydraulic equipment including hydraulic piston pumps and motors for over 70 years. Full-line authorized stocking distributor of quality hydraulic components and systems from top manufacturers renowned for performance and reliability.

We recommend using the piston pumps in high-pressure applications. In some cases, it is more economical to run a piston pump compensated that puts out a very low output flow until needed. This lowers electric cost and pump wear that may reduce system down time.

Norman currently stocks the Parker Denison PV (PVP) units and is part of the Parker Denison Distribution Network if another unit is needed that is not in stock at Norman Equipment. Denison is one of the most recognized names in hydraulic units in the world. For many years, their products were recognized by their distinctive blue color. Today, the Denison brand is part of the Parker-Hannifin family and all pumps are painted black.

Gear Pump Manufacturing (GPM) manufactures a complete range of internationally interchangeable commercial components for Bearing gear pumps, Bushing gear pumps, Motors and Flow Dividers.

Hydraulic motors (sometimes incorrectly spelled as “hydrolic” motors) convert hydraulic pressure into force that is able to generate great power. They are a type of actuator that converts the pressure of the moving hydraulic fluid into torque and rotational energy.

Hydraulic motors are an important component overall in the field of hydraulics, a specialized form of power transmission that harnesses the energy transmitted by moving liquids under pressure and converts it into mechanical energy. Power transmission is a general term denoting the field of translating energy into usable, everyday forms. The three main branches of power transmission are electrical power, mechanical power, and fluid power. Fluid power can further be divided into the field of hydraulics and the field of pneumatics (translating the energy in compressed gas into mechanical energy).

Arguably, hydraulic power traces back to the beginnings of human civilization. For thousands of years, humans have harnessed the power of moving water for energy. (The most basic “hydraulic” application is harnessing moving water to turn wheels.) For a brief survey of hydraulic history, please refer to our article on Hydraulic Cylinders.

In terms of hydraulic motor development, the middle of the Industrial Revolution proved to be a notable turning point. During that year, English industrialist William Armstrong started developing more efficient applications of hydraulic power after observing inefficiencies in water wheel usage on a fishing trip. One of his first inventions was a rotary, water-powered engine. Unfortunately, this invention failed to attract much attention, but it provided an early model for a rotary actuator based on hydraulic power.

The use of hydraulic systems in general offer several advantages within the overall field of power transmission. Some of those advantages include efficiency, simplicity, versatility, relative safety, etc. These and other advantages are further elaborated on in our article on Hydraulic Pumps.

Hydraulic motors are able to produce much more power than other motors of the same size and for this reason are used for larger loads than electric motors.

When space constrictions are an issue, small hydraulic motors are used. Small hydraulic motors have small stroke lengths; they may be less than an inch.

A major disadvantage of using hydraulic motors is inefficient usage of the actual energy source. Power systems with hydraulic motors can consume large amounts of hydraulic fluid. For example, it is not uncommon for hydraulically-driven machines on construction sites to require 100 or more gallons of hydraulic oil to operate.

Since they are often confused in everyday language, it is important to distinguish between hydraulic motors and hydraulic power packs or hydraulic power units. Technically speaking, an enclosed mechanical system that uses liquid to produce hydraulic power is known as a hydraulic power pack or a hydraulic power unit. These packs, or units, generally include a reservoir, a pump, a piping/tubing system, valves, and actuators (including both cylinders and motors). It is not uncommon, however, to hear a hydraulic motor described as consisting of these components – a reservoir, a pump, etc. However, it is more accurate to describe a hydraulic motor as a part of an overall hydraulic power system that works in sync with these other components. Hydraulic motors are a type of actuating component within an overall hydraulic power system – a component responsible for actually translating hydraulic energy into mechanical energy.

Liquids represent a “median” state between gases and solids on the matter spectrum. Despite this, liquids represent solids far more than gases in an important aspect: they are virtually incompressible. One consequence of this is that force applied to one point in a confined liquid can be transmitted quite efficiently to another point in that same liquid. This reality forms the basis of the mechanical energy that hydraulic systems are able to produce. For a fuller explanation of how hydraulic power works, please refer to our article on Hydraulic Pumps.

It has previously been noted that “Pascal’s Law” applies to confined liquids. Thus, for liquids to act in a hydraulic fashion, it must function with some type of enclosed system. As noticed in the introduction, these “systems” are known as hydraulic power packs and share three main parts—a reservoir, a pump and an actuator—that work together to convert hydraulic energy into mechanical energy.

Hydraulic motors are an integral part of machines that rely on hydraulic power for operation because they actuate and “complete” the process of converting hydraulic energy into mechanical energy. Since hydraulic motors are fairly simple machines that are composed of rotating machinery, they specifically translate hydraulic energy into rotational mechanical energy. The main enclosure and interior components of the motor are made from metal such as steel or iron so they can withstand high pressures and operating speeds. In a sense, motors can be thought of as hydraulic pumps working “backward” or in reverse.

Overall, a hydraulic power unit pumps fluid (usually a type of oil) via a small pneumatic engine from a reservoir and sends it to the motor while regulating fluid temperature. Oil is pumped from the reservoir through an inlet valve to an outlet valve through a series of gears, turning vanes or cylinders, depending on what specific type of hydraulic motor it is. Pressurized fluid creates mechanical energy and motion by physically pushing the motor, causing the rotating components to turn very quickly, and transferring energy to the machinery that the motor is linked to. Typically, not every rotational component is directly connected to producing mechanical energy; for example, in a typical gear motor, only one of the two gears is connected to and responsible for turning the motor shaft. This type of operation directly contrasts with electric engines, in which electromagnetic forces produced by flowing electric current are the response for rotating the motor shaft.

Hydraulic motors, rotary or mechanical actuators which is operated by the conversion of hydraulic pressure or fluid energy to torque and angular displacement.

Driveshaft, a part of the hydraulic motor that delivers or transfers the torque created inside the motor to the outside environment where it is used for lifting loads and other applications.

Vane hydraulic motors have a hydraulic balance that prevents the rotor from sideloading the shaft, with the pressure difference develops the torque as the oil from the pump is forced through the motor.

There are three basic kinds of hydraulics motors: gear, vane and piston type. Each is identified by the design of the rotating component inside. Collectively, the various types of hydraulic motors are optimal for a wide range of specific applications, conditions or usages.

Another common type of hydraulic motor. Radial piston hydraulic motors have pistons mounted around a center shaft that is eccentrically balanced. Fluid causes the pistons to move outward, causing rotation. Axial piston hydraulic motors derive their name from the fact they use axial instead of radial motion, despite their similar design to radial piston motors.

Built into wheel hubs to supply the power needed to rotate the wheels and move the vehicle. A hydraulic wheel motor can operate a single wheel or multiple wheels, depending on the power of the motor and the size of the machine.

Other motors focus on the rotational speed and torque. High speed hydraulic motors convert hydraulic pressure into force at elevated rotations per minute thereby generating large amounts of power. High torque hydraulic motors run at low speeds while operating with increased torque, thus earning the name low speed-high torque (LSHT) motors.

Advances are still being made to hydraulic motors and their various applications. One example is the development of hybrid hydraulic automobiles, which are being developed as an alternative to gas/electric hybrid cars. Hybrid hydraulic vehicles are particularly efficient at reclaiming energy when braking or slowing down.

A type of orbital hydraulic motor, have rollers that are hydro-dynamically supported to minimize friction, ensuring maximum durability and high output at high pressure.

A type of orbital hydraulic motor, are particularly suited for long working cycles at average pressure. Rotor motors are operated by lobes that are fixed and set directly on the stator.

Hydraulic systems and their use are abundant in a wide variety of fields including construction fields, agricultural fields, industrial fields, transportation fields (e.g. automotive, aerospace), various marine work environments, etc. Hydraulic motors are commonly used in machinery that requires strong pressurized actions such as aircraft for raising the wing flaps, heavy duty construction vehicles such as backhoes or crane industrial lifting or for powering automated manufacturing systems. Hydraulics motors are also used in trenchers, automobiles, construction equipment, drives for marine winches, waste management and recycling processes, wheel motors for military vehicles, self-driven cranes, excavators, forestry, agriculture, conveyor and auger systems, dredging and industrial processing.

While hydraulic power transmission is extremely useful in a wide variety of professional applications, it is generally not recommended to use only one form of power transmission. Although it is somewhat counter-intuitive, the maximum benefit of each form of power transmission (electrical, mechanical, pneumatic, and hydraulic) occurs when each form is integrated into an overall power transmission strategy. As a result, it is worthwhile to put in an effort to find honest and skilled hydraulic manufacturers / suppliers who can assist you in developing and implementing an overall hydraulic strategy.

Despite the apparent simplicity of hydraulic systems, engineers and manufacturers must take into account certain variables in order to build an efficient and safe device. The fluid used in the motor or system must be a good lubricant, first and foremost. It should also be chemically stable and compatible with the metals inside the motor. The pump, fluid reservoir and relief valves should be of appropriate power, capacity or strength to allow the motor to perform at optimum levels.

Problems with hydraulic motors can often be traced to poor maintenance, the use of improper fluid within the motor, or improper usage of the motor itself. Some not uncommon causes of motor failure are:

It is important to keep in mind that hydraulic motors are designed to function within certain limits which should not be exceeded. Those limits mainly include torque, pressure, speed, temperature, and load. To give one example, operating a hydraulic motor at excessive temperatures thins hydraulic fluid, negatively affects internal lubrication, and decreases overall the efficiency of the motor. Staying within a motor’s operational limits will preempt unnecessary and needless malfunctions.

In terms of safety, the relative simplicity of hydraulic systems and components (when compared to electrical or mechanical counterparts) does not mean they should not be handled with care. A fundamental safety precaution when interacting with hydraulic systems is to avoid physical contact if possible. Active fluid pressure within a hydraulic system can pose a hazard even if a hydraulic machine is not actively operating.

A container that stores fluid under pressure. Accumulators, the common types of which are piston, bladder and diaphragm, are used as an energy source or to absorb hydraulic shock.

The amount of fluid that passes through a pump, motor or cylinder in a period of time or during a single actuation event, such as a revolution or stroke.

Proven in more than a decade of demanding commercial service, the Outboard Hydraulics system bolts onto and draws its power directly from an outboard motor. It provides the small-boat fisherman with access to established, efficient hydraulic haulers for gear such as lobster and crab pots, gillnets, and long-lines. The Outboard Hydraulics package has also proven itself highly effective in powering hoists and winches in other applications as diverse as mooring removal, salmon-pen maintenance, and oil-spill recovery work.

The Outboard Hydraulics system has been successfully fitted to electric-start Mercury/Mariner, Evinrude/Johnson, and Yamaha outboards of 50-235 horsepower. Installation is simple and can be performed by any of our qualified dealers: A keyed hub that bolts to the flywheel accepts the shaft of the kit’s hydraulic pump. The pump itself is attached to a torque arm that bears against the system’s cast-aluminum mounting plate, preventing the pump body from rotating. Because the hub is free floating and centered over the crankshaft, the pump automatically aligns itself as pressure is generated during the hauling operation.

Because of its simple design, the Outboard Hydraulics package is extremely rugged. And, when properly installed, it will not cause any extra wear-and-tear on the outboard and will not interfere with normal maintenance of the engine. At the same time, the unit can be quickly detached to allow for major repair of the outboard or for transfer to another engine.

The line speed capability of the Outboard Hydraulics system has consistently met the demands of small-boat fishermen in the United States, Canada, and abroad. Figure A demonstrates the no-load line speed generated by a typical unit when linked to three different haulers. (Note that performance varies, depending on the model of Char-Lynn hydraulic motor used with the system.) Figure B shows the lifting

The Outboard Hydraulics assembly has been bench and field tested under a wide variety of conditions. Pump output has been measured from 2 to 10 gallons per minute (g.p.m.) at pressures varying from 10 to 2,000 pounds per square inch (p.s.i.). At 1,500 p.s.i. and 3 g.p.m., the hydraulic motor in a typical setup is working well within its design capacity for torque (line pull) and speed.

Figure C shows how pump output varies with engine r.p.m.. Figure D demonstrates how hydraulic-motor output changes with outboard speed for each of the three Char-Lynn units commonly used with the Outboard Hydraulics system. Note in Figure C that the line labeled “recommended engine speed” is used to indicate maximum working efficiency under normal conditions. Up to 5 h.p. can be taken from the unit under the proper circumstances and with compatible components.

We strongly prefer to sell our hydraulics package through established outboard-motor dealers who can handle everything from installation to repairs. However, in cases where there is no dealer nearby, or when a local dealer chooses not to handle our system, we will sell directly to individual commercial fishermen, aquaculture-lease holders, boatyard operators, government agencies, and other qualified customers.

In addition to manufacturing each package at our shop in Waldoboro, Maine, we offer an extraordinary level of support to those who purchase the Outboard Hydraulics kit. Contact us for product ordering and technical assistance, and–when needed–we can talk a buyer through installation procedures and problem repairs.

This equipment was specifically engineered to create little additional strain on an outboard. The increase in fuel consumption is minimal (far less than the extra gasoline that would be burned if a Briggs & Stratton-type auxiliary engine were used to drive your boat’s hydraulics). A typical piece of gear, like a trap hauler, draws only 1.5-3 h.p.- a small percentage of a large outboard’s output, even at idle. Furthermore, this minimal horsepower loss occurs only when the gear (in this case, a trap hauler) is engaged.

At idle, there just isn’t enough available horsepower/torque in the smaller engines, except for the lightest of applications. The outboard has to be run at high r.p.m. to generate the amount of power required for serious hauling operations, and that sort of usage can appreciably shorten the life of the engine.

Both pressure and flow vary with engine r.p.m. In a typical installation, there is a flow of 3 gallons per minute (g.p.m.) at 1,200 pounds per square inch (p.s.i.) when the outboard is turning at 1,150 r.p.m. As engine speed increases, so do the rate of flow and the level of pressure.

The capacity of any hydraulic system is a function of the flow and pressure it can generate. The Outboard Hydraulics equipment has the power to lift in excess of two tons, but because of the relatively low flow involved, the rate of lift would be quite slow. Your dealer can help you select the hydraulic motor that will meet the line-speed and lifting requirements of your particular hauling operation.

5. Can a specific Outboard Hydraulics package be transferred from one outboard to another? What if the second engine differs from the first in horsepower and/or brand name.

The important variables are the top-cover casting, the pump cover, and the coupling. The casting is made of aluminum and can often be filed to fit the cowling of the new engine. The molded-fiberglass pump cover is a different matter: The original holes for the inlet and outlet hoses may not be in the right place once the pump has been transferred to the second outboard. But, new top covers are readily available through your dealer.

The farther the pump from the reservoir, the greater the strain on the pump. In other words, the shorter the distance between the outboard and the fluid tank, the longer the life of the pump. We don’t recommend using additional lengths of hose, but if it’s required because of a particular boat’s layout, call us. You will need to use hoses of a larger inside diameter than originally called for, and we can specify the right sizes for your layout.

Because of their design, quick-disconnect fittings would restrict flow in the hydraulic lines and unbalance the system’s self-centering hub. As a result, the lifting capacity and/or speed of the Outboard Hydraulics package would be compromised.

In general, the reservoir has enough capacity to handle hot weather. However, like all on-board systems, the Outboard Hydraulics equipment should be checked regularly. If the hoses or tank are too hot to touch, the system is overheating and should not be used in hauling operations.

Check the hydraulic motor that normally powers the equipment you’ve chosen, and determines its requirements for flow (in gallons per minute) and pressure (in pounds per square inch). If these specifications match the output of your Outboard Hydraulics package, then the accessory will probably perform as required; if not, you should consult with the equipment’s manufacturer about alternative hydraulic motors.

Since 1935, Muncie® Power Products has been a leading source of mobile power components to the truck equipment industry. In addition to Power Take-Offs and hydraulic motors, Muncie offers directional, pressure and flow control valves as well as system design capabilities. Call us today or visit our website for more information.

FluiDyne is an ISO certified manufacturer of hydraulic pumps, motors & valves. Our promise is to serve and respect the rebuilders and resellers of North America and the global market with high quality new and remanufactured pumps, motors, valves, filters and filter elements.

Having innovative solutions for mission-critical applications makes Hydraulics Technology the preferred. For over 25 years, our impressive list of hydraulic pumps has met the needs of various applications. In assuring the highest quality products to our customers and meeting their expectations, Hydraulics Technology maintains ISO Certification. HTI is ISO 9001:2008 Certified.

Industrial Flow Solutions is a trusted manufacturer of hydraulic pumps and centrifugal pumps. We pride ourselves on our high-quality products and personalized customer service. Various industries we serve include industrial, food & beverage, and medical. All of our products are tested to ensure quality and durability.

AeroControlex began manufacturing pumps in Cleveland, Ohio in 1945. Over the years, AeroControlex has established itself as an industry leader in the production of hydraulic, fuel, lube and scavenge, centrifugal and coolant pumps. Our worldwide customer base demands the highest quality, cost effective products for the most demanding commercial and military applications.

All World Machinery Supply offers high-quality, affordable pumps, motors, and power units from reputable brands like Daikin, Nachi, Eaton, Tokimec, NOP, Grundfos, Yuken, and Fuji . Our team of representatives and engineers can find or cross any pump/mortor to what you are looking for. We can even help you design a custom application suited to your fit your needs.

American Eagle Accessories Group is a manufacturer of truck equipment accessories. These products include: hydraulic-driven air compressors, drawer systems (tool storage), bolt bins (fastener and fitting storage), lube skids, lube trailers, fuel trailers, and utility construction trailers. All of our products are designed and manufactured in the U.S.A.

Founded in 1991, AZ Hydraulic Engineering manufactures high quality air-operated hydraulic pumps serving a broad clientele. We offer hydraulic piston pumps, power units, tank pumps and more with 25 different pressure ranges up to 50,000PSI and a proven track record for reliability and easy, low cost maintenance. AZ Hydraulics is the source for quality hydraulic pumps and friendly customer service.

Barbee Engineered Testing Systems is a manufacturer of hydraulic power units, hydraulic valve testers, air-driven hydraulic piston pumps, high pressure pumps, hydraulic power systems, high pressure systems and more. Our hydraulic pumps are available with up to 30,000 PSI. Check out our website.

Berendsen Fluid Power is one of the largest distributors of pneumatic and hydraulic products in North America. We distribute from quality manufacturers products such as hydraulic pumps, hydraulic motors, hydraulic gear pumps, mixer pumps and more. Visit our website for more information.

Bosch Rexroth is a global leader in manufacturing industrial hydraulics, including proportional and servo valves. Directional control, high response, flow control, pressure relief, pressure reducing, and servo valves name some of our products. Our rugged valves are a perfect fit your electrohydraulic control applications. A variety of models are available for your viewing on our website.

Brand Hydraulics is a leading designer and manufacturer of high-quality hydraulic valves including hydraulic directional control valves, hydraulic flow control valves, hydraulic relief valves, hydraulic selector valves, shuttle valves, pilot check valves, flow dividers and more. Brand also has a line of quality hand-operated hydraulic pumps. Premium hydraulics since 1956.

For 40 years, Bucher Hydraulics, Inc. has specialized in hydraulic systems, including products such as hydraulic motors and hydraulic power units. Applications include concrete pumps, forage wagons, harvesters, lifting devices, recycling machines, door openers, log splitters and many others.

A Cascon hydraulic pump is used in a wide range of OEM equipment market applications. Whether you"re in the aircraft & aerospace, chemical, gas turbine or industrial or mobile markets, our hydraulic pumps and specialty pumps will meet your requirements and provide solutions that an off-the-shelf pump cannot. Contact Cascon, Inc. today for more information!

CAT PUMPS specializes in high pressure pumps, reciprocating pumps, positive displacement pumps, plunger-piston pumps and we also manufacture hydraulic pumps and hydraulic power units. We are an industry-leader in customer service and quality triplex pump design and products.

CLYDEUNION Pumps is one of the world"s leading pump companies - a centre of excellence in Pump Technology, Hydraulic Design and Engineering. We are structured to provide a specific focus on each of our customer"s key markets as well as providing full global aftermarket support. CLYDEUNION Pumps incorporates an accumulation of over 300 years of engineering expertise.

We have over 55 years of experience in manufacturing hydraulic components. CROSS Manufacturing, Inc. distributes hydraulic filters, hydraulic cylinders, hydraulic gear pumps and hydraulic systems worldwide. Our hydraulic systems are used for automotive, agricultural, mining and construction purposes.

D&D Machine & Hydraulics Inc, located in Fort Myers, Florida, is a manufacturer of hydraulically driven, submersible pumping systems that serves the Agricultural, Construction, Industrial, Mining, Petroleum and Municipal markets worldwide. More than 45 years ago, D&D realized the unlimited potential of hydraulics. Since then, D&D has revolutionized the dewatering industry with a series of hydraulically driven pumps that provide the most technologically advanced and precisely engineered features available today. Specifically, D&D builds electric or diesel-driven Power Units and Axial Flow, Trash, Sludge, Slurry/Digester and Mixed Flow pump heads. The flow capacity of these pump heads range from 450gpm to 55,000gpm and heads of 250 feet are attainable. If a standard pump will not meet the performance needed for a special application, D&D’s wide range of specialty pumps can meet your individual requirement.

When the owners acquired D&D, it was a four-employee, custom machine shop that repaired pumps used by local farmers. Shortly thereafter, D&D began to manufacture hydraulic pumps for a local sales and rental company. In the 1980s, as the business grew, D&D began to sell to other customers throughout the country, eventually achieving global recognition.

Danfoss will drive your vehicle transmission to a new level of performance with our Danfoss piston pumps and motors. Designed for intelligent vehicle management systems, our range brings you closer to your goals for reduced fuel consumption and high operator comfort. We deliver components and systems for machine from 15 to 2500 horsepower.

We create hydraulic pumps that can be utilized for standard and specialized purposes. Our high pressure pumps can handle pressures from 3,000 to 15,000 psi with flows of 200 gpm. Our systems can also perform with various fluids including mineral-oils, low-lubricity fire-resistant fluids. We are dedicated to developing the most reliable hydraulic pumps!

Eaton Hydraulics designs, manufactures and markets a comprehensive line of reliable, efficient hydraulic systems and components including hydraulic motors, hydraulic power units and other hydraulic systems. We serve various markets and applications with our quality systems and accessories.

We offer and repair hydraulic pumps and hydraulic motors. As one of the biggest suppliers of hydraulic power units (original or replacement) and a worldwide distributor, we can ship anywhere in the world immediately. Our inventory of motors is immense and our sales staff has years of experience.

Welcome to the Florida Hydraulic Industrial web site. Browse our categories for hydraulic pumps, hydraulic cylinders, hydraulic and industrial hose, including a wide variety of pressure washer hose, all common hydraulic hose fittings.

Flowserve® is the world leading manufacturer of quality hydraulic pumps — air piston pumps, hydraulic water pumps, vane pumps, entire hydraulic systems, plus valve repair. Our products are used by many industries — chemical; hydrocarbon processing; oil and gas; power; water resources.

Fluid Power International provides expertise in hydraulic pump repair & replacement. We specialize in repairing & replacing metric pumps & motors for Japanese and German heavy machinery as well as hydraulic components for excavators. We will tear down and inspect your part with no obligation.

Established in 1978, Gator Pump manufactures high volume pumps for irrigation, flood control, liquid waste pumping and many other applications. Steel fabricated hydraulic pumps are offered in several different sizes and configurations including vertical pumps, floating pumps and trailer pumps as well as custom pumps operated on electric, diesel or hydraulics to suit clients" needs. Call us today!

We provide a number of different styles of air driven high pressure hydraulic pumps ranging from 100 PSI to 60,000 PSI. Here at High Pressure Technologies, LLC we take customer satisfaction very seriously which is why we can customize our products to match your requirements. It is our goal to exceed your expectations. Please visit our website or give us a call today to learn more information!

We started developing hydraulic drive submersible pumps in 1977. We can provide you with a hydraulic pump, hydraulic gear pump and hydraulic power unit to match. If a standard system doesn"t meet your needs, we can custom design one for you. We make our models in a variety of materials.

Since our beginning in 1947, Hydraulic Supply Company (HSC) has been dedicated to fulfilling customers’ needs. We are a full service distributor of fluid power products and services. We carry a selection of over 20,000 hydraulic, pneumatic and industrial products in stock from the most recognized brands in the industry. Our goal is to provide customers with a large selection of hydraulic, pneumatic and industrial products with the best professional services, right when you need them.

Made-to-order & made-to-last custom hydraulic pumps faster than you can expect from other companies. The widest selection of hydraulic gear pumps & piston pumps, plus stock replacement pumps ready for immediate shipment. Brands: Webster, Danfoss, Barnes, Haldex, Cessna, Eaton, Vickers, etc. Hydraulic.Net’s specialization is in short run special application gear pumps with little tooling expense.

Hydraulics International, Inc. (HII), headquartered in Chatsworth, California, U.S.A., is a leading manufacturer and supplier of integrated products, services and support to military forces, aviation and commercial industries, government agencies and prime contractors worldwide. Focused on defense and commercial technology, HII develops manufactures and supports a broad range of products and systems for over a hundred industries as well as mission critical and military sustainment requirements worldwide. HII is also recognized as a leading manufacturer and supplier of air, electric, hydraulic, & manual driven high-pressure products to Automotive, Airline & Aerospace, Cannabis, CNG, Defense, Fire-Health & Safety, Fluid Power, Fuel Cell Hydrogen, General Manufacturing, Laboratory, University & Research, Mining, Oil & Gas, Paintball, Plastics, Power & Energy, Recreational Sports Diving, Electronics and other industries. We produce 85% of our products internally, thus eliminating our dependency upon outside sources for quality, reliability, and expediency. Because of our self-sufficiency, we are able to maintain key competitive advantages that include faster response to engineering and design problems, and reliability of components critical to functionality.

Here at Hydreco we manufacture hydraulic solutions for a number of markets including: agricultural, municipal, construction, mining and transportation. Our company has an extensive history of engineering success. If you are unsure what hydraulic products are best for your task then just let one of our representatives know your application and we can handle the rest!

Over 50 years, Hydro Leduc has developed more than 100 patents because of our passion for innovation in the hydraulics field. We find solutions to our customers’ most complex and demanding applications for piston pumps, hydraulic motors, hydro-pneumatic accumulators and custom hydraulic components.

HYTORC developed the jet series pumps which are portable, heavy duty, light weight, high flow to withstand harsh environments. These air or electric driven Hydraulic Pumps are engineered for continuous, non-stop use in harsh environments. If used on Torque Tools, Jacks, Cutters, Presses or Bending equipment, their reliability is unmatched by any other Hydraulic Power Pack.

We are a distributor of hydraulic and pneumatic products such as hydraulic pumps, filters, motors, valves and more. Our manufacturers make hydraulic gear pumps, piston pumps and hydraulic pumps with aluminum or cast iron casings. We have been in business for 30 years and service all of our products.

Founded in 1971, Interface Devices is a world-class designer and manufacturer of air driven fluid pumps, hydraulic valves and custom engineered fluid power products. IDI proudly designs and manufactures all our products at our Milford, CT facility. As we continue to grow and develop it is our principle aim to provide quality in our designs and manufacturing while responding to customer needs.

Jones Hydraulic Service is a company dedicated to solving the needs of our customers. Jones Hydraulic Service is a leading supplier / vendor too many large and small corporations, and many independent contractors. Our customer service is a top priority. Whether customers are looking to Purchase, Rent or Repair hydraulic tooling or keep their workers safe with High Visibility Apparel or Mosquito Repellent we get the job done. Jones Hydraulic Service is proud to be serving the energy, marine, petrochemical, railroad, construction, foundation repair, pipeline and shipyard industries since 1977. Jones Hydraulic represents some of the world’s leading Hydraulic Tool & Equipment manufacturers that include SPX Power Team, SafeWay Hydraulics, Pell Hydrashear, TORC LLC, Eagle Pro, and more. Offering Hydraulic Tool & Equipment Sales, Service and Repair for 40 years.

Jones Hydraulic listened to its customers needs for industrial supplies and now stocks LED Work Lights, Safety Mats, Hand Held Power Tools, LED Flood Head Lamp, Spill Clean Up Supplies, Water Dams and more. Jones Hydraulic represents the leading industrial supply companies including PowerSmith, Genesis, Spill Tackle, Quick Dams Nite Ize and more.

Jones Hydraulic helps their customer create a safe and healthy work environment by providing safety products that include Personal Protective Equipment, Hi-Vis Clothing, First Aid Supplies, Mosquito and Insect Repellents, Eye Protection and Outdoor Protective Equipment. Jones Hydraulic represents some of the leading safety product manufacturers such as SAS Safety, GSS Safety, Sawyer, Southern Glove and more.

We recently opened a Safety Equipment & Hydraulic Tool Showroom. We welcome you to stop by and see some of the latest product offerings. Our Showroom is located at 5955 Armour Drive, Houston, TX 77020. We are proud of our 40 year history and look forward to serving our customers for many more years to come.

At Linde Hydraulics, we pride ourselves on our designing/manufacturing of high pressure pumps and the Linde Hydraulic Valve. Our hydraulic pumps have been a mainstay since 1970. Our pumps are used in agriculture and defense. A complete hydraulic system can be offered, along with motors that deliver reliable performance.

Our Maximator® air-driven hydraulic pumps deliver from 60 to 60,000 PSI and cycle automatically. The Maximator® pumps are used in our hydraulic power units. We can provide you with standard or customized high pressure pump power systems. Repair and refurnishing services also available.

Since 1941, Metro Hydraulic Jack Co. has been your single source for all your hydraulic needs. We represent a wide variety of material lift and equipment manufacturers and we sell only the best. Our products are designed to help improve the safety of your work environment and increase your productivity. We are proud to provide a wide selection of high-quality hydraulic lifting products to our customers. As a third-generation family-owned business, all of us at Metro Hydraulic Jack Co. pride ourselves on delivering the same high-quality hydraulic products and top-notch customer service as we have always been. Our knowledgeable sales staff are experts at specifying the right equipment to meet our customers’ requirements and needs. Our extensive list of hydraulic lifting products includes aerial lifts , dock lifts , pallet lifts, platform lifts , rotary lifts, scissor lifts, small hydraulic lifts, and hydraulic lift systems. Additionally, we supply cylinders, pumps, valves, hydraulic and air jacks, pullers, punches, lubrication equipment, and more. The manufacturers we represent, including Autoquip, ECOA, Lift Products, Inc., and Lift-rite, are the best in the industry and we are proud to offer their products.

Our engineering services include custom hydraulic and lube system design to meet our customers’ specifications, as well as other specialized services. We are a supplier to numerous industries, including automotive, construction, industrial, material handling, mobile, and railroad. You can find an impressive list of our customers on our website. Call or email us today to learn how we can service your hydraulic needs.

Our Hydraulics Division, headquartered in Greenwood Indiana, is a world-class manufacturer of pumps, valves, flow controls, hydraulic power units and other products. We are known not only for our product excellence but for our competitive pricing and the ready availability of our products when customers need them.

Sales, service and rental for all major brands of hydraulic pumps and other air, electric and hydraulic equipment. Hydraulic pump offerings include hand pumps, air pumps, electric pumps, gas pumps and intensifiers. Highly skilled at matching tool to application for hydraulic pumps and more.

Oilgear heavy-duty axial piston hydraulic pumps are built. Engineered with Oilgear’s advanced “hard-on-hard” rotating group and hydrodynamic bearing support on the cylinder barrel, our pumps provide longer operational life and optimal resistance to contamination. Available in a variety of frame sizes and control options, Oilgear offers just the right pump to fit your demanding needs.

Founded nearly 25 years ago, Panagon Systems has remained a trusted company producing hydraulic parts on demand for a number of shops, manufacturers and industries. The company, located in Macomb, Michigan, is the largest aftermarket hydraulic piston pump and parts manufacturer in North America, providing a vast variety of current and obsolete components. Panagon has the ability to produce a product from raw materials to a finished pump, assembled, tested, painted and shipped from our facility. Due to the phasing out of old products, customers usually find that the parts they need are no longer available, or that the delivery time is too long or the cost is too high. Panagon Systems attempts to fill the void OEM’s create by manufacturing the phased out, expensive, unavailable pumps, motors and transmissions, from companies like Vickers, Denison and Rexroth.

We manufacture hydraulic pumps, motors and parts for a variety of industrial and mobile applications. Our replacements are equivalent to the Eaton/Vickers line of PVH, PVQ, PVB, PVM, PVE, PFB, MFB, MFE, TA19, TA1919, TDV10 and TDV20 series units and Rexroth A10V series units.

In addition to supplying complete replacement piston pumps, Panagon also offers all replacement parts for all series units such as Rotating Groups, Shafts, Compensators, Yokes, Valve Blocks, Housings, Bearings, Seal Kits, Cylinder Blocks, Shoe Plates, Swash Plates, Piston Kits, Wafer Plates, Control Pistons, Control Rods, Bias Pistons, Bias Rods, Spacer Kits, Saddle Bearings, and more.

Parker"s Hydraulic Pump and Power Systems Division provides a broad selection of piston pumps, hydraulic motors and power units that help our customers meet their industrial and mobile application needs.

The Parker Pump & Motor Division specializes in gear pumps and motors used in a myriad of industries. With decades of experience, PMD provides the best products in the market, supplemented by best-in-class customer service, and the deepest knowledge in the industry.

Perfection Hydraulics manufactures, distributes, and services hydraulic cylinders, hydraulic pumps, hydraulic valves, hydraulic gear pumps, and other hydraulic components for heavy equipment. Our products provide you with the best value available for today’s dynamic industry. With our reputation for quality and reliability, you can rely on us for your heavy duty hydraulics needs.

Pierce Sales is a manufacturer and distributor of 12-volt hydraulic pumps, hydraulic hoses, hydraulic fittings, tie-rod cylinders and many more products. We offer professional installation services. We also have spare parts and provide repair services to get your equipment running as soon as possible.

Precision Fluid Power is a distributor of hydraulic pumps, including hydraulic vane pumps, hydraulic piston pumps and hydraulic gear pumps. We provide new hydraulic motors or we rebuild them, as well as hydraulic valves and hydraulic cylinders. We also offer hydraulic pump repair. Call us today.

Robeck Fluid Power is a leading manufacturer of hydraulic pumps and an assortment of lubrication equipment. Our products include aluminum structural framing, automation equipment, electronics, fluid conveyance equipment, hydraulic pumps, lubrication systems, and pneumatic products. We are a fully authorized distributor of Eaton, Charlynn, Hydro-line, Aeroquip, and Vickers products. Visit our website to learn more about our manufacturers or to speak with a sales representative.

Since 1978, we have been offering hydraulic pumps, motors, valves and cylinders with 100 years combined experience. We distribute hydraulic systems, and also do on-site machine shop repair services and rebuilding. Our quality hydraulic power units can be ordered around the clock for your convenience.

SC Hydraulic Engineering has been a leader in the design & manufacture of various air-powered hydraulic pumps, hydraulic piston pumps, hydraulic power units and systems plus hydraulic valves—relief, inline check, high pressure. We also have the ability to customize our products to fit your needs. In business since 1953, we work worldwide through distributors and manufacturers.

Since 1899, SIMPLEX products have been used by industries that need hydraulic and mechanical equipment and solutions. Our continuous duty hydraulic pumps are equipped for up to 5HP, as are our gas, air & electric hydraulic pumps for heavy-duty tooling applications. Our positioning and lifting products turn challenges into progress.

Established in 1979, Southwest Seal and Supply has grown to become one of the most predominant distributors of sealing, hydraulic hoses, fittings, couplings/connectors, gasketing and fluid control products in the Southwest. We offer a wide range of products including the best in selection, quality, and value-added services.

POWER TEAM is a world leader in hydraulic special service tools and equipment for motor vehicle and industrial markets, manufacturingprecision quality high-pressure hydraulic products, which include pumps,cylinders, valves, clamping components, related hydraulic accessoriesand special tools and equipment.

Stone Hydraulic Systems manufactures AC and DC hydraulic power units for a broad range of OEM applications such as auto hoists, dock levelers, hose crimpers, lift tables and compactors to name a few. Stone"s products provide a wide power range up to 5.5 horsepower.

SRS Crisafulli hydraulic-powered pumps handle industrial-strength pumping jobs: trash, mud, waste, raw sewage, sludge. Discharge sizes 2" to 24" and flows to 18,000 GPM. Standard Power Unit models in electric, diesel or gas, 32 to 180 horsepower, outputs from 18 to 119 GPM or custom built to your spec.

Sunfab was founded by Eric Sundin in the year of 1925. Sunfab develops, produces and sells components to operate hydraulic equipment within the area of mobile vehicles. After more than 90 years, the third generation of the Sundins are still running the company in the spirit of Eric Sundin, with a family atmosphere, flexibility and innovative solutions.

TK Trailer Parts is a dedicated manufacturer of high quality products. We are a turnkey supplier of hydraulic cylinders, hydraulic pumps, hydraulic valves, and much more. If you need assistance with find the right solution for you then feel free to reach out to one of our representatives.

Serving customers worldwide since 1911 with our innovative positive displacement pumping solutions, including custom designs. For even the toughest industrial, OEM & sanitary applications, we manufacture Vane Pumps, Internal & External Gear Pumps & more.

Willman Industries is a large, independent, jobbing foundry, located in Cedar Grove, Wisconsin. We produce all types of gray iron and ductile iron components, ranging from ounces to 40,000 lbs. Thin-walled exhaust manifolds, heavy-section hydraulic pumps, valves, housings, flywheels, clutch plates, machine tools, power generating equipment are typical of our product mix.

Zinko Hydraulic Jack is a leading manufacturer of high-quality hydraulic products. In addition to our namesake hydraulic jacks, we provide scissor jacks and aluminum jacks as well as hydraulic cylinders, lifts and other material handling equipment. At Zinko, your needs are met with a diverse inventory of quality hydraulic pumps including air pumps, hand pumps, electric hydraulic pumps and more.

Since 1935, Muncie® Power Products has been a leading source of mobile power components to the truck equipment industry. In addition to Power Take-Offs and hydraulic motors, Muncie offers directional, pressure and flow control valves as well as system design capabilities. Call us today or visit our website for more information.

Hartmann Controls offers some of the most dependable hydraulic motors for industrial and mobile applications. Exceeding the capabilities of most other hydraulic motors, our products offer simplicity and precision for exact operations. Our superior motors can go for decades. Check out our catalog today! Our products are used by the world’s largest manufacturers and companies. Contact our company!

Planet Products Corp. is a contract manufacturer and manufacturer of various hydraulic products. Hydraulic products include motors, valves, and pumps. Planet serves mainly the defense, aerospace, machine tool, and industrial sectors and is ISO9001/AS9100 certified.

Precision Fluid Power sells new & rebuilt hydraulic motors. We also specialize in the repair of hydraulic components such as hydraulic motors, pumps, valves & cylinders. All units received for repair will be completely stripped down, cleaned and inspected, & any bad parts will be replaced. With over 150 years of experience we serve all industries, large or small. Please contact our company today!

For 40 years, Bucher Hydraulics, Inc. has specialized in hydraulic systems, including products such as hydraulic motors and hydraulic power units. Applications include concrete pumps, forage wagons, harvesters, lifting devices, recycling machines, door openers, log splitters and many others.

Danfoss has 45 years of experience offering hydraulic motor solutions. We supply hydraulic power systems for moderate to heavy load demands. Our orbital motors have speeds extending from 2,500 rpm to 600 rpm. We also have hydraulic motors that vary in size from mini to medium to large.

Established in 1966, Delta Power designs and manufactures industrial hydraulic cartridge valves and manifold systems using these valves. We also produce hydraulic motors and hydraulic power units. Contact us for cutting-edge hydraulic system designs and products.

For more than four decades, Dynex/Rivett has been manufacturing hydraulic power systems and components. Our products include hydraulic motors, hydraulic power units and variable speed motors. We serve the worldwide market with our top-quality motors and hydraulic systems.

Eaton Hydraulics designs, manufactures and markets a comprehensive line of reliable, efficient hydraulic systems and components including hydraulic motors, hydraulic power units and other hydraulic systems. We serve various markets and applications with our quality systems and accessories.

Flint Hydraulics, Inc. is dedicated to the worldwide distribution of original and replacement hydraulic pumps, hydraulic motors, and hydraulic pump replacement parts for heavy mobile and industrial equipment. We maintain a database of more than 30,000 hydraulic pumps, motors and parts by OEM part number for name brands of heavy mobile equipment such as Caterpillar, J.I. Case, John Deere, Clark-Michigan, Terex, Grove, Komatsu-Dresser, Bobcat and many more. Located in the heart of America’s distribution center, Flint Hydraulics, Inc. has grown into one of the largest suppliers of original and replacement hydraulic products in the world. Off-the-shelf availability, coupled with the distribution center advantages Memphis has to offer, give us the unique ability to provide hydraulic components across the globe, using the most efficient and economical means available. We stock substantial quantities of pumps, motors, parts and assemblies and can ship at a moment’s notice anywhere in the world. Most items are available for same or next day shipment.

Our production facility is uniquely designed for assembly and testing of various types and designs of hydraulic pumps & motors to meet the just-in-time inventory requirements of our clients. Our professionally trained staff is the most knowledgeable and schooled customer service team in the entire industry. Equipped with the latest distribution software and our own custom-tailored cross-referencing databases, our staff is able to provide instant information regarding the particular hydraulic component your client needs.

Fluidyne Fluid Power is a leading industrial power distributor and manufacturing facility specializing in hydraulic motors, components and custom-designed fluid power systems. We have an extensive product line able to provide exactly what you need. They combine fluid power expertise with a vast selection of world-class components to provide you with unsurpassed system efficiency.

Haldex is a global provider of vehicle solutions, including hydraulic pump motors, hydraulic power units, gear pumps and fan drive pumps as well as AC/DC motors. Reduce emissions and innovative diesel engines with Haldex excellent solutions and customer service. We base our decisions and actions on the customer’s best interests. Contact us today!

An employee-owned company, Hydraquip is a distributor of fluid power products, including hydraulic motors from Hydro-Gear, Hydrokraft, Rineer Hydraulics, Rotary Power, Sauer Danfoss, Ultra, Vickers and Von Ruden. Since 1951, we have been serving the fluid power industry.

Need an old cylinder swapped or remanufactured? Need telescopic cylinders, replacement cylinders or hydraulic cylinders for large industrial equipment? At Hydraulic Repair & Design, we can supply all industries with new, custom or repaired cylinders, experienced design & friendly customer service!

Hydreco® Inc. offers a wide range of hydraulic gear motors as well as hydraulic pumps and valves. We offer drive axles, gearboxes, hydraulic pumps, gear pumps and piston pumps. Contact us today for more information on our quality products.

Over 50 years, Hydro Leduc has developed more than 100 patents because of our passion for innovation in the hydraulics field. We find solutions to our customers’ most complex and demanding applications for piston pumps, hydraulic motors, hydro-pneumatic accumulators and custom hydraulic components. A complete list of available motors and features can be found on our website. Contact a representative today for any further inquiries!

Since1967, Hydrotech has provided industries with innovative solutions for their fluid power needs. Our listing of hydraulic motors are manufactured by Bosch Rexroth, Rineer Hydraulics and White Drive Hydraulics. For more information call our experienced team of technicians and sales support!

Founded 40 years ago, Innerspace designs, develops and manufactures top-quality, efficient propulsion systems for marine vehicles. Our product capabilities include hydraulic products such as hydraulic motors and customized hydraulic systems. Check out our website for more information.

For over 50 years, MacTaggert Scott has been in the hydraulic motor business. Our radial piston hydraulic motors are used in various markets such as marine, offshore and defense. If you are looking for a hydraulic motor that runs quietly and efficiently, MacTaggert Scott is your answer. Call us today!

Our DVT Series of hydraulic motors started our hydraulic drive efficiency in the 1970s. We’ve developed more products and grown since then. Now we invite you to explore our MHA Series of heavy-duty, high-torque, low-speed, rotating shaft or rotating case hydraulic wheel motors. Check our website.

Since 1921, the world’s most demanding hydraulic control applications have relied on Oilgear high-performance fluid power solutions. We’ve met the challenge. Every time.Founded in Milwaukee, Wisconsin, Oilgear was built to bring only the most advanced engineering to our customers. Decades later, Oilgear continues to set the standard in industries requiring precise, high-performance hydraulic systems. From the depths of the ocean to the surface of the moon, Oilgear products often operate in the harshest of environments. We’re known for our robust line of pumps, but we offer so much more. No matter what your operations need, we have cartridge valves, subsea pressure control solutions and electrical embedded controllers to tackle your issues head on.

It might not seem possible, but we’re more than those products too. Oilgear is a worldwide provider of complex fluid power control system. We have a strong presence in forging and extrusion press control systems. And high-specification HPUs and high-pressure hydraulic systems.

With products operating in the toughest environments on earth, quality is Oilgear’s top priority. You can see it in our full collection of hydraulic control products and systems. We know what it takes to perform to ISO and API standards. And with an extensive history of earning certifications from institutions like ABS, DNV and Lloyds.

Parker"s Hydraulic Pump and Power Systems Division provides a broad selection of piston pumps, hydraulic motors and power units that help our customers meet their industrial and mobile application needs.

The Parker Pump & Motor Division specializes in gear pumps and motors used in a myriad of industries. With decades of experience, PMD provides the best products in the market, supplemented by best-in-class customer service, and the deepest knowledge in the industry.

The Perfection Machining Company was founded in 1964 to design and manufacture replacement parts for the mining industry. Renamed Permco 4 years later, the family-owned business developed a wide array of replacement hydraulic parts and eventually expanded its manufacturing capabilities to include cast iron parts and the resulting complete units. Today, we maintain our focus on customer service and continue a decades-long tradition of developing fluid power systems that meet each of our customer’s specific needs. Permco’s product offering now includes gear and vane pumps/motors, flow dividers, intensifiers and a variety of accessories and components. Permco offers the highest quality product possible to our wide customer base of OEMs and distributors. Because we understand that our success depends on the success of our customers, we are committed to reducing customers’ costs and increasing the simplicity of doing business with us.

Poclain Hydraulics manufactures hydraulic motors, hydrostatic transmissions and high-torque cam-lobe motors, which are used in agriculture, construction equipment, industry, marine and material handling applications. Our innovative company culture motivates us to pursue progress and excellence in everything we do. Contact Poclain today to learn more!

Established in 1979, Southwest Seal and Supply has grown to become one of the most predominant distributors of sealing, hydraulic hoses, fittings, couplings/connectors, gasketing and fluid control products in the Southwest. We offer a wide range of products including the best in selection, quality, and value-added services.

Founded in 1945, Spencer Fluid Power remains a value added distributor of hydraulic components and systems. Spencer Fluid Power continues to sell and support hydraulic components to a wide array of customer types. Small to large OEM"s, timber, mining, construction and oil & gas are just a sample of the numerous industries Spencer supports today.

Sunfab was founded by Eric Sundin in the year of 1925. Sunfab develops, produces and sells components to operate hydraulic equipment within the area of mobile vehicles. After more than 90 years, the third generation of the Sundins are still running the company in the spirit of Eric Sundin, with a family atmosphere, flexibility and innovative solutions.

Wojanis Supply Company is a total fluid power facility encompassing sales, service, design and manufacturing capabilities for a full line of hydraulic motors, pumps, valves and integrated systems for a range of applications. Additionally, we are an authorized representative for many of the top component manufacturers allowing us to fulfill your every demand.

Manufacturer and distributor of standard and custom liquid pumps including hydraulic pumps. Types include high-flow pumps and dual component injection pumps. Hydraulic pumps are available in single acting and double acting pump styles with single or double air drive head types. Features include different pressure ratios, air driven pressures ranging from 60 psi to 60000 psi, pilot air valves, explosion proof construction, external spool valves and air regulators. Liquid pumps are used for oil, water and chemical service applications including lifting, jacking, presses, tooling, roller tensioning, hydrostatic pressure testing, lubrication systems, trash compactors and truck or trailer wheel cylinders. Same day shipping available.

Showcasing among our product lines ourSilver Tsunamiself-contained outdrive propulsionunit, ourGemini Twin Thrusterself-contained outdrive propulsion unit with twin propellors powered by a single engine, and ourPowerPackstand-alone hydraulic power unit and ...

Completed on 9-16-2016 on schedule and shipped to Metalcraft Marine Inc. (Kingstong, Ontario Canada) for installation. 300HP Power Pack connected to two Tiltable Outboard Mounted Thrusters with Pilot House Controls.

Parks, Canada June 2016 Installed by Navamar Ship Repair Montreal Canada. 125hp Perkins with Tiltable Outboard Thruster, 360 Steering with Pilot House Controls.

Tilt and trim Pumps are a key component on I/O"s, and outboard motors. Without them, we would not get the performance or control necessary for a smooth ride. Also, with an outboard motor, the tilt and trim pump eliminates the need to physically raise and lower your motor, saving you from possible back issues down the road. These tilt and trim pumps help to get your boat up on a plane quicker as well, saving you in fuel costs.

Like anything electrical that is in a marine environment, eventual failure is always a possibility in which case you may be faced with having to rebuild or replace your tilt and trim pump. The way you can tell if it needs to be repaired or replaced is by watching and listening to the pump when it is being operated under a load. It will operate slower in the up position and will have a laboring sound. Before doing anything make sure that you have at least 12 volts at the tilt and trim motor. Usually, it is the motor that is the issue, but sometimes it can be more severe and an issue with the hydraulic pump itself.

Location of the tilt and trim pumps differ between the I/O"s and outboard motors, with the I/O"s generally being mounted on the inside of the boat close to the transom which makes it easier to access for repair or replacement. On the outboards they are usually located in between the transom brackets on the outside of the boat, making them more difficult to get to for repairs or replacements, although some are mounted on the outside of the transom bracket as well, which are not as difficult to work on. When it comes time to repair or replace your tilt and trim pump, please have your serial # or model # handy before calling your parts supplier.

Parker"s Hydraulic Pump and Power Systems Division provides a broad selection of piston pumps, hydraulic motors and power units that help our customers meet their industrial and mobile application needs. Our division is the result of the Parker piston pump business’s acquisition of Denison Hydraulics and merger with the Parker Oildyne Division. Reach higher hydraulic working pressures, get better reliability, higher efficiencies, and achieve lower operating costs and improved productivity on your heavy-duty equipment with Parker’s line of piston pumps and vane pumps, electro-hydraulic actuators, hydraulic motors and power units, piston motors and hydrostatic transmissions.