pto driven hydraulic pump with reservoir for sale

Chief & PrincePTO Hydraulic Tractor Pumps are for all tractors with power take off with a shaft size 1 3/8 " Dia. 6 - Tooth Shaft 540 R.P.M. 21 Tooth Shaft 1000 RPM

A Chief or Prince PTO Pump can be used to power Log splitter, Backhoe, Landscaping equipment Farm machinery, Hydraulic motors, Front end loader, wood splitter, Fence post driver

Self adjusting wear plates both sides-Roller bearings-Internal spline with Thru-drive feature - High tensile cast iron end plates - Slips on Two outlet ports with plug to seal unused port. no gear box required

PTO drive shaft. No additional gear box required. They feature self-adjusting wear plates that seal off oil leakage and offset any wear or expansion that may occur during the life of pump.. Minimum gear clearance. Made of high tensile aluminum housing, with cast iron end plates.

Hydraulic pumps convert mechanical energy into fluid power energy. All hydraulic pumps are positive displacement which means the outlet flow is sealed from the inlet flow. A small amount of fluid is designed to leak internally to lubricate and cool the internal components of the pump. The only function of the pump is to produce flow in a system. Bailey International, LLC provides a wide range of pumps and accessories including clutch pumps, dump, gear, jaw couplers, mounting brackets, pistons, PTO, vane and two stage pumps.

It mounts easily to any planter and, depending which pump size is purchased, will provide an extra 12 gpm to 40 gpm as well as 4 to 6 additional ports.

Many producers wanting to upgrade or upsize their air seeders discover they are lacking hydraulic capacity on their current tractor, and don’t have room in their machinery budget to upgrade their tractor.

One solution is the Command HydraBoost PTO-driven auxiliary hydraulic system, these can operate a portion of the hydraulic flow requirement, allowing producers to continue using their favourite tractor! These units come in several sizes, the larger sizes - 24gpm, 32 gpm & 40 gpm are used in combination with air seeders.

Our PTO Auxiliary Hydraulic System is used for any type of agricultural equipment when an application or piece of equipment requires more hydraulic oil flow than the tractor/equipment can provide. Out most typical application is for Air Seeders (planters) when Ag Tractor Hydraulic systems don"t meet the flow, pressure or cooling requirements for proper operation of equipment. DFP"s PTO Auxiliary Hydraulic Systems are completely customizable to fit your specific application.

Hydraulic reservoir is typically 25 gallons, but capacity is flexible to meet any application requirements as these systems are built to order. Also included is a Spin-on Return Filter and an Oil Cooler (12VDC) with Temp. Switch mounted and plumbed to Hydraulic Reservoir (tank). (end user to supply power to 12VDC Fan on cooler) Other options for the hydraulic reservoir, but are not limited to: Relief Valve Block, Pressure and Tank Manifolds, Hydraulic Directional Control Valves and Flow Controls. DFP"s PTO Auxiliary Hydraulic Systems are completely customizable to fit your specific application.