sae aa hydraulic pump in stock

1AG2U02L HONOR HYDRAULIC PUMP, GEAR TYPE, SAE AA 2-BOLT, 1/2" X 1/8" KEYED SHAFT (1.51" LONG), CCW ROTATION, 0.12 CUBIC INCH DISPLACEMENT, 3500 PSI CONTINUOUS, 4200 PSI INTERMITTENT, 600-4000 RPM RANGE, SIDE PORTS, #8 SAE O-RING INLET, #6 SAE O-RING OUTLET, VITON SEALS, PRESSURE BALANCED PUMP FOR HIGH EFFICIENCY, HONOR 1AG2U02L

High pressure hydraulic gear pump. Constructed of an aluminum center section and cast iron end plates. Mounting flange is a 2 bolt AA. Ports are SAE 8 inlet and SAE 6 outlet and the drive Shaft is a 1/2” Dia.meter x .75 long straight keyed Shaft with 1/8” keyway. Shaft is determined when the Shaft is facing you.

Equipped with bi-directional check valves, the Chief MH Series series features small displacement and high pressure ratings. The MH series Pump/motors have an aluminum body with cast iron flange construction, and case drain. Available displacements range .065 to.517cu.in/rev. Similar to MTE “D” series and Sauer-Danfoss Webster YB series.

1.5PE Series Aluminium Gear Pump, 0.57 cu in/rev, 2-Bolt SAE AA Mounting Flange, 1/2 St. Keyed x 1.06 long SAE AA Shaft, SAE -10 Side Inlet, SAE -8 Side Outlet, CW Rotation

These are high-quality Vivolo Italian-made hydraulic gear pumps. Hydraulics demands extremely fine tolerances & quality materials. Vivolo has been producing hydraulic items for over 30 years. We offer a 12-month warranty These are interchangeable with much more expensive hydraulic pumps such as Casapa. These come with Clockwise rotation as a standard, but we can supply as counterclockwise. Please contact us for this option.

If you are unsure about identifying your pump, please clean & send a photo of numbers & letters stamped in the housing of all pumps. We may be able to interpret this for you

At OneHydraulics, we aim for 100% customer satisfaction on every order. If you are not completely satisfied with your order, please contact us right away so we can make it right.

Items purchased on onehydraulics.comwith inventory from our Houstonlocation can be returned within 30 days from the date it was shipped. Items purchased that come from our manufacturer"s stock may be subject to restocking fees as determined by our manufacturers. Before returning any products, please verify with OneHydraulics if a restock fee is required for the product return.

Any item custom manufactured for a customer’s application,including winches and other made-to-order products, may be non-cancellable and non-returnable. OneHydraulics will not accept returns on those items for any reason. If you may need to return a product you are ordering, please verify if it may be returned prior to ordering.

All items must be returned in NEW condition, in the original packaging. We will not accept items that have been used or purchased from another company. All returns are subject to a restocking fee and shipping fees are non-refundable. If a return is required as a result of an error made by OneHydraulics (e.g., shipping an incorrect item, etc.), the abovementioned fees may not apply. Please contact your sales person or emailsales@onehydraulics.comso we can fix any errors relating to your order immediately.

Please see our Terms and Conditions relating to warranty claims. Prior to shipping an item back to OneHydraulics, you must first obtain a Return Goods Authorization (RGA) form and number. All returns must be shipped prepaid, with the RGA number clearly marked on the outside of the shipping carton. All items must be packaged properly to prevent damage upon shipping back to OneHydraulics. Failure to do so may result in a rejection of the return. Following our inspection, you will be notified of the product’s disposition and charges, if any. Products returned for factory warranty issues must be accompanied by a report explaining the non-performance or failure of the returned part. Please contact OneHydraulics prior to shipping back any item relating to a warranty issue, as those items may need to ship back to the factory directly.

Any item labeled ‘Final Sale’ on the website is non-cancellable and non-returnable. Any item custom manufactured for a customer’s application is non-cancellable and non-returnable. OneHydraulics will not accept returns on those items for any reason.

At OneHydraulics, we aim for 100% customer satisfaction on every order. If you are not completely satisfied with your order, please contact us right away so we can make it right.

Items purchased on onehydraulics.comwith inventory from our Houstonlocation can be returned within 30 days from the date it was shipped. Items purchased that come from our manufacturer"s stock may be subject to restocking fees as determined by our manufacturers. Before returning any products, please verify with OneHydraulics if a restock fee is required for the product return.

Any item custom manufactured for a customer’s application,including winches and other made-to-order products, may be non-cancellable and non-returnable. OneHydraulics will not accept returns on those items for any reason. If you may need to return a product you are ordering, please verify if it may be returned prior to ordering.

All items must be returned in NEW condition, in the original packaging. We will not accept items that have been used or purchased from another company. All returns are subject to a restocking fee and shipping fees are non-refundable. If a return is required as a result of an error made by OneHydraulics (e.g., shipping an incorrect item, etc.), the abovementioned fees may not apply. Please contact your sales person or emailsales@onehydraulics.comso we can fix any errors relating to your order immediately.

Please see our Terms and Conditions relating to warranty claims. Prior to shipping an item back to OneHydraulics, you must first obtain a Return Goods Authorization (RGA) form and number. All returns must be shipped prepaid, with the RGA number clearly marked on the outside of the shipping carton. All items must be packaged properly to prevent damage upon shipping back to OneHydraulics. Failure to do so may result in a rejection of the return. Following our inspection, you will be notified of the product’s disposition and charges, if any. Products returned for factory warranty issues must be accompanied by a report explaining the non-performance or failure of the returned part. Please contact OneHydraulics prior to shipping back any item relating to a warranty issue, as those items may need to ship back to the factory directly.

Any item labeled ‘Final Sale’ on the website is non-cancellable and non-returnable. Any item custom manufactured for a customer’s application is non-cancellable and non-returnable. OneHydraulics will not accept returns on those items for any reason.

Lovejoy Hydraulics Pump / Motor Mounts help power unit designers and fabricators simplify their Power Unit designs. The Pump / Motor Mount, commonly called the “Bell Housing”, allows direct mounting of flange mount pumps to NEMA “C-Face electric motors. This eliminates the need for coupling guards, foot brackets, shims, risers, and motor mounting plates, and assures accurate shaft alignment.

The ease of assembly reduces power unit fabrication costs. Lovejoy precision machines each cast aluminum alloy pump/motor mounts to 0.003 inch concentric from the motor pilot to the pump pilot, and the mounting faces parallel to each other and perpendicular to the pilot Centerline within 0.002 inch. This assures accurate shaft alignment, which prolongs bearing, seal and coupling life. This also helps to reduce noise and vibration in the power unit.

Lovejoy Hydraulics Cast Aluminum Pump / Motor Mounts are cast from a lightweight, high strength aluminum alloy. For safety, a molded OSHA orange coupling access cover is included for mounts larger than the 56C motor frame size.

Should you have a problem finding a Lovejoy Hydraulics distributorin your area, please contact a Lovejoy sales representative or ask your current Lovejoy Power Transmission distributorto start carrying and supporting the new products!