seim hydraulic pump for sale

*Shanley Pump Group is not affiliated with nor distributor for Seepex®, Allweiler®, Moyno®, Tarby®, Netzsch®, or Continental Inc.® all referenced product names, brands, models, or part numbers is solely for identification purposes. Seepex® is a registered trademark of Seepex®. Moyno® and Tarby® are registered trademarks of Robins and Myers® and NOV®, Netzsch® Incorporated is a registered trademark of the Netzsch® Group, Allweiler® is a registered trademark of Colfax® Corporations Continental® Pumps is a Trademark of Continental® Ultra Pumps.

The SEIM PA Series Submersible 3-Screw Pump is SEIM"s best seller worldwide. These economical screw pumps are designed for submerged applications in the lube oil or hydraulic oil tank.

This is ideal for use in difficult locations where a normal pump will not fit. It’s simple yet robust construction ensure years of operability with minimal complications.

SEIM screws pumps are volumetric self-priming pumps suited to handle oils and fluids with a minimum lubricating property. The pumps design makes them intrinsically reliable and efficient in their applications.

For over 30 years SEIM has been supporting the pumping industry with their innovation and expertise in the pumping and handling of oils and viscous chemicals.

The system of Company Quality Seim S.r.l. - Screws Pumps -, recognized as early as November 1995 (certification in accordance with ISO 9001 and extended to UNI EN ISO 9001:2000 nell"otdabre 2003), oversees all activities of the Company, with the aim of provide the customer with a service which fully meets their expectations in terms of product quality, delivery reliability and availability from stock of finished products. The sales network Seim S.r.l. - Screws Pumps - is extended in all the continents, is growing, and is able to provide supporda qualified technician to product selection and begin operating an extensive international customer base of primary importance.

CIRCUITSThis is a group of applications where the lubrication pump operates at higher suction pressures than the atmospheric pressure. The inlet pressure typically ranges between 10 and 100 barg.

The pump is used to seal the chambers of a screw compressor and to lubricate the mechanical seals. Pressurised closed circuits are usually used for this service.

SCREW PUMPS COMPONENT TYPE COMPONENT MODEL MAIN CHARACTERISTICS TYPICAL APPLICATIONS BOILER /BURNER LUBE: Diesel Engine, Thruster, Gear Box THREE SCREW PUMPS TYPICAL FLUIDS Body Materials Nitrided Steel Nitrided Steel Nitrided Steel Nitrided Steel Carbon Steel Mechanical Seal Magnetic coupling Integrated Relief Valve STANDARD IN/OUT Port Connection ANSI - option * Deck Machinery, Pitch Propeller, Steering Gear, Door and Ramp *** Up to size 083: SAE 3.000psi port /from size 083 to 156: DIN FLANGE

THREE SCREW PUMPS MEDIUM PRESSURE TWIN SCREW PUMPS DOUBLE STATION PO-PWO POF-PWOF Nitrided Steel Nitrided Steel Nitrided Steel Nitrided Steel Nitrided Steel Nitrided Steel Nitrided Steel ANSI - option ANSI - option "Depends from valve model and size

SCREW PUMPS Viscosity Range jcStl \ Model Pump FUEL and DIESEL Oil PUMP HYDRAULIC PUMP depending from operation conditions and applications - with or without Timing-gear

TECHNICAL DETAILS SERIES INSTALLATION DATA Installation Marine, Industrial Transfer, fuel supply, lubricating, boiler OPERATING DATA Handled fluid Viscosity range Fuel oil HFO - DO - LSMG0 - Hydraulic and Lube oils From 1,2 to 5000 cSt Pump speed Rotation (viewed from coupling end) Flow rate Suction pressure Delivery pressure Operating temperature range Mechanical seal Bearing type Radial ball on main shaft Bearing lubrication Mounting arrangement Inlet & Outlet connection Horizontal or vertical mounting Special version MATERIALS Casing/Flanges Modular cast Iron GGG40 Nitrided steel Surface...

PB pump Series was designed for low capacity (from 3 Ipm) and low pressure {16/40bar) services. Fluids normally used are Diesel Oil, LSMGO, Fuel Oil forBoiler/ Bumerfeeding and Lubricant Oil, Mineral Oil forsmall lube and pre-lube system Like ali the other SEIM pumps series, PB series is designed to satisfy customer needs also in terms of !ow maintenance cost and long iifeofthe internal parts of the pump. Every choice taken during the PB pump project, like material or components to be used, like surface treatmentand hardening, dimension, tolerance and surface roughnessand machining, is...

Main characteristics of this pump series are: - Compact shape - Same casingforthe two sizes - Standard flange connection (SAE) - High quality mechanical Seals -Casing material: UNI EN 1563GJS400 Nodular Cast Iron - Screw material: Nitrided Steel -Version coupled with Magnetic Drive - Pumps used forSEIM SPB double pump station for Boiler/Burner

SOLUTIONS FOR GREEN APPLICATIONS MAGNETIC COUPLING DRIVE SERIES INSTALLATION DATA Applicable to all PUMPS SIZE: PB series (from 3 to 41 lpm) at 16 / 40 bar PHS series (from 6 to 200 lpm) at 16 bar PZ series (from 30 to 4.800 lpm) at 16 bar More usual applications : FUEL SUPPLY: Cargo, Transfer, Separator, Feeder, Circulating, Boiler/Burner OPERATING DATA Handled Fluids: HFO, DO, GO, LSMGO (all fluids with some lubricant properties but dangerous in case of leakage) Minimum viscosity: From 1,2cS (*) For different values contact Seim WHERE and WHEN we propose the GREEN SOLUTION Where we must...

ADVANTAGES & SOLUTIONS MAGNETIC COUPLING DRIVE SERIES WHICH and HOW CHANGES with the G G G G G GREEN SOLUTION SHIP SAFETY System EFFICENTY RULES COMPLIANCE REALIABILITY PERFORMANCE with Low Sulfur and Low viscosity FLUID GREEN SOLUTION: MAGNETIC COUPLING RISK OF FIRE (Leakeage FREE PUMP) ENVIRONMENT IMPACT (also: less Packaging materials, less additional transport G HEALTH IMPACT (less Skin contact and Inhalation during the Maintenance) G SPARE PARTS NUMBER and WEIGHT to MANAGE on EACH SHIP G SPARE PARTS COST G MAINTENANCE COST

SEIM in Germany SEIM Headquarter SEIM S.r.l. Via Volta, 17- 20090 Cusago - Milano - Italy Tel. +39 02 903 92 11 - Fax +39 02 903 921 41 www.seim.it e-mail: seim@seim.it Le informazioni contenute nel presente catalogo sono a titolo indicativo, SEIM si riserva la possibilità di modifica senza preavviso. Informations included in this catalogue are indicative, SEIM reserves the possibility to introduce variations without prior notice.

Shopping for a replacement Pump for your Master Spas Swim Spa just got easier! We have a large variety of new factory-direct models available in stock. We sell only brand name Swim Spa Pumps,never used or refurbished units.

This is a Genuine OEM Direct Replacement Master Spa Part 6hp, 2spd, 48 Frame Sta-Rite Pump Sale is for this pump, Brand New, Power cable and wet-end attached.

To face them, SEIM rearranges the share of the company know-how within it Sales Dept. structure and at the same time reinforces itwith a Team of specialized Sales Engineers. Their high level of professionalism aim to provide quick answers to inquiries and queries from our customers all over the world.

The renowned reliability of SEIM pumps, unfortunately, can not mean that they are indestructible ... To provide answers to the growing demand for spare parts for SEIM pumps now obsolete and out of catalogue, as well as to provide prompt assistance to the request for specific spare parts, SEIM starts business at the Spare Parts Office. Here, a dedicated Team follows customers from all over the world and quickly provides them with answers.

The market demand is constantly expanding and SEIM responds with further investments. Two new CNC machines served by a robotic system allow the production of components in a 24/7 cycle.

The PB three screw pump finds development in the cooling lubrication sector in machine tools with a version dedicated to this specific use, and it is immediately successful!

The high reliability of the SEIM product and the extrinsic characteristics in the series of advantages offered against other types of pumps, lead the PB product to be one of the most requested in the production of SEIM.

The growing demand for finished products requires a new organization of space for the SEIM structure: hence the need to expand its boundaries with the acquisition of the neighboring structure of over 2000 square meters.

The new spaces are used for Logistics and offer opportunities for the installation of new testing areas for custom products SEIM products and for all the tests requiring the presence of inspectors of the Customer, third parties and / or certification bodies.

SEIM"s investments to cope the demand of the Markets passes new through production technologies, then the purchase and commissioning of a new CNC machine capable 24/7 production and equipped with an integrated control system of the screws manufactured.

A big step forward in order to produce ever better components: this does not exempt SEIM from the 100% functional testing of the pumps produced, to further grant user’s satisfaction and product reliability.

Among the line-up of SEIM pumps, is added the PB Series: it is specifically designed for applications in the Marine sector, for the pumping of combustible fluids and lubricants.

In the Mid-West of the USA, the collaboration of Shanleypump Inc., undertaken by the interest of Larry Shanley Jr. in SEIM since the early 2000s, is affirmed with the creation of SEIM USA.

In Germany, the engineer Lars Kampmeier and his propensity for commercial development given his long experience on the market bring SEIM to a rapid growth thanks to the start of commercial activity under the name SEIM GERMANY UG.

The collaboration with a local entrepreneur, the graduated engineer Chan Suk SEO, begun in 2005. It finds its concretization in the definitive affirmation of the SEIM products on the market with the opening of the offices of Seoul and then of Pohang.

In Pohang are located office building with warehouse (a large pumps inventory), test benches and after-sales service. SEIM KOREA provides further impetus to penetrate a demanding market from the point of view of professionalism, service and fast delivery.

SEIM Marine Division is born, specializing in all ship and port applications where pumps are required that are approved by leading international Classification Bodies.

Quality in production also passes through a system equipped with adequate control systems: SEIM equipes with a state-of-the-art 3D metrological system.

the new twin-screw pumps produced by SEIM find applications where high flow pumps and / or situations are required where the NPSHr represents a challenge.

The most recent Division at SEIM – the Marine Division, achieves the type approval of ABS and begins the production of double pumping stations for fuel supply systems.

The beginning of the new year sees the expansion of the area owned by SEIM, with the annexation of a neighbor building directly connected to the buildings of the “historic core” (production department and office building).

Continuing in the wake of the success of the pumps meeting the requisites of the API 676, the version of the PCX Series complying with the III ed. is now available.

The three screw pump PWO - high-performance series - appears on the market and it becomes immediately successful in the world of cooling lubrication in the machine tool sector and production of mechanical components for the auto motive industry.

SEIM pumps comply with ATEX regulations for zone II, but in 2007 a step forward takes place when some Series obtain the ATEX Ex II 2G T3 / T4 certification.

The API676 standard pumps have been SEIM"s know-how since the 1990s: the most up-to-date version becomes the PCX Series, complying with the requirements of the API676 II standard.

For the first time in the history of SEIM, the weight of the turnover of the Industry and O & G Divisions exceeds that generated by the LIFT Division.

The cooling lubrication in machine tools achieves new performance targets with the entry into the catalog of the PO6 Series - high pressure pump for water - oil emulsion featuring top construction characteristics.

To complete the offer to the PO6 pump, are now available the pneumatic control valves VCP and the safety valves for direct mounting on the PO6 pump OUT port, the BVPA Series.

- SEIM FRANCE (ESP GROUPE) is the local collaborator for France. His General Manager - Mr. René Radigon, with its long experience deriving from the previous collaboration with SEIM of the company Fluavis, gives great impulse to the French market for SEIM.

- the winning series of "PX" pumps begins to make its appearance on the markets, the forerunner of SEIM"s global success in hydraulic and heavy lubrication.

The growing demand for pumps requires a more structured production lines at SEIM screw pumps. The answer is to implement the production quality and capability from a few CNCs to a set of new machining centers (characterized by superior performance).

SEIM s.r.l. born from the intuition of its founder, the entrepreneur Mr. Giuseppe Martini, who wants to give an Italian answer to the growing demand for screw pumps for the hydraulic elevators sector. On July 1, 1975 SEIM began its production at the plant located in the west of Milan.

Production of modern modular semi-mobile washing lines for separation (enrichment) of sand by size classes: 0.05; 0.071; 0.1; 0.16; 0.2; 0.63; 1.0; 2.0 and 5.0 mm. These models of SGU sieve hydrocyclone plants are designed for different capacities: 20 t / h, 40 t / h, 60 t / h and 120 t / h. Each of these installations can be adjusted for individual customer requirements (coal sludge, sand, limestone and granite screening, metallurgical waste, thermal power plant sludge, etc.).A typical model of SSU consists of:- a sump of the circulating pulp, which receives the starting material and water, but often the prepared suspension is supplied;- a classification unit, which consists of a slurry pump that creates the necessary pressure to feed the slurry, a hydrocyclone of the required diameter (which affects productivity) and shape (which affects the separation size), separating the watered target product "sands" and the suspension "drain" containing dusty and clay particles (usually waste of enrichment), as well as pipelines and shut-off equipment;- dehydrating high-frequency screen GVCh with special sieves (polyurethane, rubber urethane or stainless steel sieves), which brings the final product to the required moisture class.This set of equipment is enclosed in a common semi-mobile frame and is equipped with ladders and walkways for quality control and maintenance.The sieve hydrocyclone unit operates on a partially closed cyclic principle. Its basis is a reservoir, which receives the initial mixture of sand, clay inclusions and water, in which the slurry level is kept within a certain range. In fact, the reservoir is needed to provide a certain concentration of the mixture that the centrifugal pump is able to lift into the hydrocyclone. In a hydrocyclone (or in double hydrocyclones), due to centrifugal forces, almost 100% of particles larger than 100 microns and 50-80% of particles larger than 40-80 microns are classified, which in the form of a highly concentrated mixture are discharged from the cyclone onto a dehydration (dehydration) screen located under the hydrocyclone. Smaller particles (which should contain all clay particles and other inclusions) are carried away with the main volume of water from the hydrocyclone into a system that divides the flow (automatic regulation by a valve) into a return to the tank and a drain, which is sent to the water purification system. The dewatering screen is equipped with polyurethane or rubber modular screens with openings (usually 0.3-1.5 mm), through which water efficiently drains into the tank, and sand particles slide to the discharge chute and are discharged onto the product conveyor. The content of dust particles in the sand will decrease to 0.02-0.9%.We strongly recommend that before choosing sorting or classifying equipment that is planned to solve your problem, it is imperative to carry out the necessary research of raw materials in our laboratory.

This depends on several factors; how frequently are spare parts required? how long has the pump been in operation? and the price of the required spare parts versus the cost of a complete new pump. For example, if a new casing, screw set and mechanical seal are required, then it is more cost effective to purchase a complete new pump as a large proportion of the high value parts are required. If the pump is wearing frequently and prematurely, then this may be an indication that the wrong type or size of pump is installed. It is a good idea to talk to us in this situation as we may be able to identify the issue with your pump or system and select a more suitable pump for your requirements.