stanley hp1 compact hydraulic pump manufacturer

HP1/HPR Compact Power Units Built to meet the tough HTMA standards. HTMA standards so they’ll provide sure Equipped with a high-speed blower and large air-to-oil cooler, our power units provide a source for clean and cool hydraulic power under the toughest operating conditions. All models feature either the powerful Briggs & Stratton Vanguard OHV V-Twin, or Honda OHV GX620 engine. These high-torque engines are fuel efficient, have lower exhaust emissions, yet run quieter than most engines their size. These power units are easy to service too – both the engine and the hydraulic spinon filters are a snap to change. A large readily available commercial battery is fully enclosed in a battery box. OPERATION AND PERFORMANCE HP1 COMPACT HPR ITEM U.S.A. METRIC U.S.A. METRIC Output (2) 5 gpm @ (2) 20 lpm @ 5 or 8 gpm 20 or 30 lpm 2000 psi circuits 140 bar circuit @ 2000 psi @ 140 bar (1) 10 gpm @ (1) 38 lpm @ 2000 psi circuit 140 bar circuit Length 35.5 in. 90.17 cm 35.5 in. 90.17 cm Width 23.25 in. 59.06 cm 23.25 in. 59.06 cm Height 29 in. 74 cm 29 in. 74 cm Weight (less fuel) 276 lbs 125 kg 286 lbs 130 kg Fuel Consumption 1.3 gph 4 lph 1.3 gph 4 lph Engine Lube System Pressure Lube/Low Pressure Lube/Low Engine Oil Shutoff Engine Oil Shutdown Running Gear 12 in. Wheels 31 cm Wheels 12 in. Wheels 31 cm Wheels Retractable Retractable Retractable Retractable Handles Handles Handles Handles Fuel Tank Capacity 4.2 gal. 16 ltr 4.2 gal. 16 ltr Hydraulic Reservoir Capacity 2.7 gal. 10 ltr 2.7 gal. 10 ltr Engine 18 hp Vanguard IC V-Twin (OHV) Stanley Features • Rugged Side Handles Run the entire length of the unit on both sides for easy lifting and protection. • Automatic Throttle Mechanism Provides automatic throttling when the tool is engaged, and return to idle when disengaged. • Sealed No-Maintenance Battery The 35-Ah battery is sealed, non-spillable and requires no maintenance. • Fiberglass Pack Muffler Quiet operation – only 85 db during normal operation. P/N 14530 3/02 • Low Oil Pressure Shutoff A standard feature to protect the engine from low lubrication conditions. • Swing Away Lifting Eye Makes lifting quick and easy using overhead lifting devices. 20 hp Honda (OHV) Equipped with a high-speed blower and large air-to-oil cooler, our power units Stanley"s compact power units feature the most efficient hydraulic circuits available in a portable power unit today.

The HP8 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The HP8 features an intuitive throttle selector which makes changing flow rates very easy. Its feature-rich, dependable operation make the HP8 the workhorse of the industry.

The HP12 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 2 and Type 3 hydraulic tools. Its powerful 23 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The HP12 features an intuitive throttle selector which makes changing flow rates very easy. Its feature-rich, dependable operation make the HP12 the industry choice for high-flow applications.

Stanley Hydraulic Tools (hereinafter called “Stanley”), subject to the exceptions contained below, warrants new hydraulic tools for a period of one year

from the date of sale to the first retail purchaser, or for a period of 2 years from the shipping date from Stanley, whichever period expires first, to be free

FREIGHT COSTS: Freight costs to return parts to Stanley, if requested by Stanley for the purpose of evaluating a warranty claim for warranty credit, are

This limited warranty and the obligation of Stanley thereunder is in lieu of all other warranties, expressed or implied including merchantability or fitness

STANLEY HP-1 COMPACT HYDRAULIC POWER UNIT 18 HP, #9281030G PARTS ONLY. STANLEY HP-1 COMPACT HYDRAULIC POWER UNIT. ( UNLESS LISTED OTHERWISE). STANLEY HP-1 COMPACT HYDRAULIC POWER UNIT BRIGGS & STRATTON VANGUARD V-TWIN MOTOR 18 HP 2 CYLINDER / GAS **LOCKED UP** FOR PARTS ONLY, NO RETURNS #9281030G O-60-F APPROXIMATE SHIPPING DIMENSIONS: 40 X 40 APPROXIMATE SHIPPING WEIGHT: 330 LBS JP IF ITEM DOES NOT WORK WE HONOR OUR 30 DAY RETURN POLICY. ( UNLESS LISTED OTHERWISE) COMPANY INFORMATION: Walton"s Industrial Supply Inc. Halls, TN 38040 **Office Hours: Mon-Fri 8am-4pm CST** IF YOUR ARRANGING YOUR OWN SHIPPING: YOU WILL NEED TO PROVIDE ALL PAPERWORK NEEDED FOR THE SHIPMENT INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCES FOR ITEMS PURCHASED IMPORT DUTIES, TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY"S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING.

STANLEY HP-1 COMPACT HYDRAULIC PUMP POWER UNIT VANGUARD 18HP. Runs great!! New battery, only 373 hours on unit. Local pick up or if the buyer sets up shipping I will strap it to a pallet. I do have a fork lift to load

Condition: Used, Brand: Stanley, Model: HP-1, Type: Hydraulic, Country/Region of Manufacture: United States, Rated Power: 18 Horse Power Briggs & Stratton

The Stanley TP08 Heavy Duty Trash Pump has been designed to get the most from an HTMA Type II hydraulic circuit. Using only 9 GPM/34 lpm of hydraulic flow, the TP08 will pump over 800 gpm/3,028 lpm at a 10 ft/2.54 m head. The free-flow impeller and 4 in./ 100 mm inlet and outlet combine to make the TP08 one of the most efficient pumps in the business.

Weighing only 59 lbs/27 kg and with its convenient handle, the Stanley TP08 Heavy Duty Trash Pump can easily be handled by one operator. The Stanley TP08 Heavy Duty Trash Pump and the Stanley HP1 Compact Power Unit make a powerful, portable team for high volume de-watering and trash pump applications.

The heavy-duty construction of the Stanley TP08 Heavy Duty Trash Pump features a fabricated, all-steel volute and abrasion-resistant cast iron impeller. The volute uses replaceable UHMW polyethylene wear plates to reduce wear and extend pump life. The heavy-duty Stanley HYREVZ™ hydraulic motor is self-lubricating.

Routine maintenance for the Stanley TP08 Heavy Duty Trash Pump is easy. The top cover is attached to the volute with six wing nuts so cleaning and inspection can be accomplished in just a few minutes.

The HP8BD Hydraulic Power Unit is a small compact hydraulic power unit designed to provide power for underwater hydraulic tools requiring a single 5 gpm up to 8 gpm. The Stanley HP8BD Hydraulic Power Unit is powered by a Briggs & Stratton industrial grade engine. Folding and locking handle, electric start, auto throttle, pressurized engine lubrication, and large pneumatic tires are standard equipment.

The Stanley GT18 HP1 HP 18 HP8 hydraulic power unit AKA Hydraulic Power Pack is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The GT18 features a computerized all-electric throttle control system that idles-down the engine when tools aren"t running, saving fuel and extending service life. Its feature-rich, dependable operation make the GT18 the workhorse of the industry. Output Flow: 5 or 8 gpm Perfect for Heavy duty Jack Hammer operations and Manta Ray Anchor Installations.

The Stanley HP Hydraulic Power Unit is a small compact hydraulic power unit designed to provide power for underwater hydraulic tools requiring a single 8 gpm up to 12 gpm. The Stanley HP12B Hydraulic Power Unit is powered by a 23 HP Briggs & Stratton industrial grade engine. Folding and locking handle, electric start, auto throttle, pressurized engine lubrication, and large pneumatic tires are standard equipment.