stanley hp1 compact hydraulic pump for sale

STANLEY HP-1 COMPACT HYDRAULIC POWER UNIT 18 HP, #9281030G PARTS ONLY. STANLEY HP-1 COMPACT HYDRAULIC POWER UNIT. ( UNLESS LISTED OTHERWISE). STANLEY HP-1 COMPACT HYDRAULIC POWER UNIT BRIGGS & STRATTON VANGUARD V-TWIN MOTOR 18 HP 2 CYLINDER / GAS **LOCKED UP** FOR PARTS ONLY, NO RETURNS #9281030G O-60-F APPROXIMATE SHIPPING DIMENSIONS: 40 X 40 APPROXIMATE SHIPPING WEIGHT: 330 LBS JP IF ITEM DOES NOT WORK WE HONOR OUR 30 DAY RETURN POLICY. ( UNLESS LISTED OTHERWISE) COMPANY INFORMATION: Walton"s Industrial Supply Inc. Halls, TN 38040 **Office Hours: Mon-Fri 8am-4pm CST** IF YOUR ARRANGING YOUR OWN SHIPPING: YOU WILL NEED TO PROVIDE ALL PAPERWORK NEEDED FOR THE SHIPMENT INTERNATIONAL BUYER-PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCES FOR ITEMS PURCHASED IMPORT DUTIES, TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY"S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING.

HP1/HPR Compact Power Units Built to meet the tough HTMA standards. HTMA standards so they’ll provide sure Equipped with a high-speed blower and large air-to-oil cooler, our power units provide a source for clean and cool hydraulic power under the toughest operating conditions. All models feature either the powerful Briggs & Stratton Vanguard OHV V-Twin, or Honda OHV GX620 engine. These high-torque engines are fuel efficient, have lower exhaust emissions, yet run quieter than most engines their size. These power units are easy to service too – both the engine and the hydraulic spinon filters are a snap to change. A large readily available commercial battery is fully enclosed in a battery box. OPERATION AND PERFORMANCE HP1 COMPACT HPR ITEM U.S.A. METRIC U.S.A. METRIC Output (2) 5 gpm @ (2) 20 lpm @ 5 or 8 gpm 20 or 30 lpm 2000 psi circuits 140 bar circuit @ 2000 psi @ 140 bar (1) 10 gpm @ (1) 38 lpm @ 2000 psi circuit 140 bar circuit Length 35.5 in. 90.17 cm 35.5 in. 90.17 cm Width 23.25 in. 59.06 cm 23.25 in. 59.06 cm Height 29 in. 74 cm 29 in. 74 cm Weight (less fuel) 276 lbs 125 kg 286 lbs 130 kg Fuel Consumption 1.3 gph 4 lph 1.3 gph 4 lph Engine Lube System Pressure Lube/Low Pressure Lube/Low Engine Oil Shutoff Engine Oil Shutdown Running Gear 12 in. Wheels 31 cm Wheels 12 in. Wheels 31 cm Wheels Retractable Retractable Retractable Retractable Handles Handles Handles Handles Fuel Tank Capacity 4.2 gal. 16 ltr 4.2 gal. 16 ltr Hydraulic Reservoir Capacity 2.7 gal. 10 ltr 2.7 gal. 10 ltr Engine 18 hp Vanguard IC V-Twin (OHV) Stanley Features • Rugged Side Handles Run the entire length of the unit on both sides for easy lifting and protection. • Automatic Throttle Mechanism Provides automatic throttling when the tool is engaged, and return to idle when disengaged. • Sealed No-Maintenance Battery The 35-Ah battery is sealed, non-spillable and requires no maintenance. • Fiberglass Pack Muffler Quiet operation – only 85 db during normal operation. P/N 14530 3/02 • Low Oil Pressure Shutoff A standard feature to protect the engine from low lubrication conditions. • Swing Away Lifting Eye Makes lifting quick and easy using overhead lifting devices. 20 hp Honda (OHV) Equipped with a high-speed blower and large air-to-oil cooler, our power units Stanley"s compact power units feature the most efficient hydraulic circuits available in a portable power unit today.

The HP8 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The HP8 features an intuitive throttle selector which makes changing flow rates very easy. Its feature-rich, dependable operation make the HP8 the workhorse of the industry.

The HP12 hydraulic power unit is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 2 and Type 3 hydraulic tools. Its powerful 23 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The HP12 features an intuitive throttle selector which makes changing flow rates very easy. Its feature-rich, dependable operation make the HP12 the industry choice for high-flow applications.

Two Stanley HP-1 compact Hydraulic power units and various Hydraulic tools. Has Two cutting saws, One Pole chain saw. One Impact. One Jack hammer with hammer bits. One Water pump. and more. See pictures. One power unit has 131 hours and one has 272 hours. Both power units are electric start with Briggs and Straton Vanguard 18 horse power gas motors on them. Condition unknown. has been sitting.

Stanley Hydraulic Tools (hereinafter called “Stanley”), subject to the exceptions contained below, warrants new hydraulic tools for a period of one year

from the date of sale to the first retail purchaser, or for a period of 2 years from the shipping date from Stanley, whichever period expires first, to be free

FREIGHT COSTS: Freight costs to return parts to Stanley, if requested by Stanley for the purpose of evaluating a warranty claim for warranty credit, are

This limited warranty and the obligation of Stanley thereunder is in lieu of all other warranties, expressed or implied including merchantability or fitness

The HP8BD Hydraulic Power Unit is a small compact hydraulic power unit designed to provide power for underwater hydraulic tools requiring a single 5 gpm up to 8 gpm. The Stanley HP8BD Hydraulic Power Unit is...

The Stanley HP28 (TWIN8) Twin Circuit Hydraulic Power Unit offers a revolutionary design capable of operating two tools at 8 gpm simultaneously. For the first time, running two hydraulic...

The Stanley PD45 Post Driver is a heavy duty tool for driving a wide range of posts including #2, #3, & #4 lb/ft "U" channel, #3 & #4 Strong Back "U" channel, #1 delineator, up to 2-5/8 inch round, or up to 2-1/2 inch square posts...

The Stanley PD45 Post Driver is a heavy duty tool for driving a wide range of posts including #2, #3, & #4 lb/ft "U" channel, #3 & #4 Strong Back "U" channel, #1 delineator, up to 2-5/8 inch round, or up to 2-1/2 inch square posts...

90 lb weight class. 1-1/4 inch Hex. Nothing equals the impact force of hydraulic breakers. With the best power-to-weight ratio, higher blow energy, and...

Stanley"s New Utility Chain Saw is a revolutionary cutting method designed to change the way the job gets done. From ductile iron to plastic pipe, this chain saw will get you in and out of the job faster,...

The TA54 Tamper is ideal for soil compaction around utility poles, sign and fence posts. It provides 1,600 blows per minute with a long 2-1/2 inch stroke for optimum compaction. The long stroke keeps the TA54 above the...

The Stanley SM21 Water Pump is one of the lightest and most durable pumps available. It’s capability of pumping 300 gpm (1135 lpm) at a 50 foot head make it ideal for vaults, manholes and more specifically in...

UTHORIZED AND UTHORIZED AND UTHORIZED AND CERTIFIED DEALER CERTIFIED DEALER CERTIFIED DEALER..CERTIFIED DEALER CERTIFIED DEALER Copyright © 1998 The Stanley Works All rights reserved OPS/MAINT USA & CE VERSION Printed in U.S.A. 24280 06/97 Ver 3...

Neumann Equipment manufactures a range of self-contained diesel or electric-powered hydraulic powerpack units to power hydraulic plant and equipment. Each powerpack unit is powered by a diesel engine or 3-phase electric motor. These units are selected with the hydraulic flow to suit your application. They are manufactured from high-quality components and will provide many years of dependable service. You can use these systems to power a range of applications, including but not limited to Winches. Cylinders. Motors. Conveyors. Drill rigs. Trommel. Centre pivot irrigation. All of our p....

The Stanley GT18 HP1 HP 18 HP8 hydraulic power unit AKA Hydraulic Power Pack is engineered for continuous professional use and is optimized to deliver ideal flows and pressures to both Type 1 and Type 2 hydraulic tools. Its powerful 18 HP Briggs & Stratton engine and best-in-class cooling system deliver the power and heat rejection pros need to keep tools working uninterrupted all day in all types of conditions. The GT18 features a computerized all-electric throttle control system that idles-down the engine when tools aren"t running, saving fuel and extending service life. Its feature-rich, dependable operation make the GT18 the workhorse of the industry. Output Flow: 5 or 8 gpm Perfect for Heavy duty Jack Hammer operations and Manta Ray Anchor Installations.