gates kelly hose manufacturer

New rubber compounds, higher working pressures and temperatures, stricter environmental and safety regulations – all make hose selection a challenge. At Gates, we make it easy. That’s because our line of high pressure oilfield hoses are made with the demands of today’s drilling methods in mind. From rotary-vibrator drilling hoses to choke and kill hoses, find oilfield hoses built tough to handle the pressure.

Example: "Gates® Black Gold® Rotary Vibrator 3 Inch Max WP 7500 PSI API SPEC 7K Tested To 15000 PSI Grade E FSL 1 Temp Range 1 ISO 14693 License 7K-0003 Made In U.S.A."

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

ISO 9001:2000 certified custom manufacturer of abrasion, oil & weather resistant reinforced hose with tubes, covers & fittings for rotary drilling & exploration work. Hose are available in various models with specifications including 2 1/2 in. to 5 in. ID, 3.06 in. to 8.90 in. OD, 5 ft. to 100 ft. length, 2500 psi to 7500 psi rated working pressure, 48 in. to 72 in. minimum bend radius, 3 in. to 6 in. API thread, 2 in. to 3 in. NPT thread, minus 40 degrees F to plus 200 degrees F operating temperature & 3.9 lbs. to 43.6 lbs. weight/ft.

The high pressure hoses are a bonded construction comprising steel and elastomeric materials. The principal characteristic of bonded construction is the build-up of individual layers in the flexible hose wall which are then combined into one unit through vulcanisation. Hose assemblies are manufactured as a single bonded unit to specified lengths where the couplings are a chemically bonded integral part of the hose.

Protects the polymer lining from mechanical damage, prevents blistering in case of high pressure gas service and decompression with vacuum service, supports the wall of the flexible hose. This layer is optional and present only for rough bore hoses, such as for flexible choke & kill lines with TauroFlon™ liner.

Fluid barrier of the flexible line. Protects the hose construction from corrosive and abrasive effects of the conveyed medium. The thickness of lining depends on the internal pressure, the inside diameter and the conveyed medium. The lining material is selected to withstand chemical and heat effects of drilling mud, well effluents, cement slurry, hydraulic fluid or whatever substance is conveyed through the hose.

Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.

Our inventory of hydraulic hose, fittings and adapters is stocked with premier manufacturers, vast and local. Able Hose is a premier Gates distributor that can meet the needs of high-powered, high-pressure hydraulic equipment with its MegaSys line. As part of an integrated solution, the spiral-wire and wire-braid hose and coupling products offer peak performance and flexibility. Our customers are in the most demanding industries such as construction, refuse, agriculture, mining and oil and gas. Customers applications challenge the strength and durability of even the toughest components. We can crimp 1/4″ – 2.5″ up to 10,000 PSI working pressure and 1-1 & 1/2″ up to 6000 PSI working pressure.

Our quality hydraulic hose assemblies feature improved hose construction technologies such as improved wire reinforcement designs and processing and new insulation materials that are abrasion resistant and color-coded (making it easy to install).

Oilfield Applications Drilling Mast Mast Base Pipe Handler Pipe Rack Draw Works Service Crane Water Tank Power Unit Fuel Tank Choke Manifold Drill Floor Emergency Generator Gates solutions can be found on virtually every part of a drilling rig.

Well Completion Applications FRAC FLEET Hydraulic fracturing fleets can consist of a variety of oilfield service trucks that feature applications in which Gates can be a solutions provider. 6 BLENDER TRUCKS WATER TRANSFER SYSTEM HYDRATION UNIT PUMP TRUCKS

Additions & Modifications PRODUCT All Gates Industrial Hoses Gates is excited to announce the revolutionary Efficiency Engineered program with a new naming system for industrial hose. All of the products in this catalog will start using the new descriptive and intuitive names. But don"t worry, the previous names will be included on all catalog pages and product labels for reference during the transition. Black Gold Rotary Vibrator 7500 Grade E Low Temp Black Gold Rotary Vibrator 5000 Grade D Low Temp Flexible connection between standpipe and top drive/swivel or between pump and standpipe...

Engineering & Services Gates delivers premium Engineering & Services to decrease downtime, increase safety for the oil & gas market, and foster risk management. It only takes one hose-related incident on a rig to shut down your an entire operation. Gates E&S is dedicated to providing worldclass products and support services to minimize downtime. Gates Hose Management System (GHMS) Hose management is key in maximizing production. The Gates Hose Management System is a comprehensive Lifecycle Management System for critical hose assemblies. Contact your nearest Gates E&S location to help...

Safe Hydraulics WHY PREVENTIVE MAINTENANCE? There are several valid reasons to begin a preventive maintenance program. Costly emergency repairs, production downtime and worker safety are just a few.The main objective of a preventive maintenance program is to identify component weaknesses before failure and loss of production. Some believe that PM actually should mean “predictive maintenance” rather than “preventive maintenance.” Preventive maintenance is especially important with hydraulic products. The high pressures and temperatures associated with hydraulics make hose and fitting...

Safety Connections Industrial hose applications become more demanding every day. New rubber compounds, higher working pressures and temperatures, stricter environmental and safety regulations – all make hose and coupling selection a challenge.The traditional industry practice of mixing and matching hoses and fittings from different manufacturers carries greater risk than ever. Poor quality or incorrectly fabricated hose assemblies cause equipment damage, lost productivity, personal injury, or worse. GATES E2E (END-TO-END) ENGINEERED SYSTEM AND DISTRIBUTOR PARTNERSHIP To mitigate risk and...

Efficiency. Engineered MORE THAN JUST NAMES Most industrial hose naming systems spawn confusion, so relating them to products and applications becomes a difficult, time consuming chore. Plus, the risk of choosing the wrong hose for the job may compromise safety, performance, and the customer"s trust. We"re making our industrial hose naming system more efficient and user-friendly. This running change uses descriptive and intuitive names. All our industrial hoses are now named "Master." The "Master" name is linked to an industry or application [ag, chem, mining, etc.), so you can tell...

Black Gold Products Rotary Vibrator 7500 Grade E Hose I.D. (ln.) RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between pump and standpipe for pumping mud at extra high pressure in oil drilling and exploration work. Meets the severe demands of today’s drilling methods including directional drilling, pressure pulses and elevated temperatures. The 3/16” thick tube is designed to handle abrasive, corrosive and oil based drilling muds. The UltraBrasion cover is designed to handle external damage from abrasion, corrosion, gouges, oil and weather. CAUTION: Field...

Black Gold Products Rotary Vibrator 7500 Grade E Low Temp Hose I.D. BLACK GOLDTM ROTARY VIBRATOR 7500 GRADE E LOW-TEMP RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between pump and standpipe for pumping mud at extra high pressure in low temperature oil drilling and exploration work. Meets the severe demands of today’s drilling methods including directional drilling, pressure pulses and elevated temperatures. The 3/16” thick tube is designed to handle abrasive, corrosive and oil based drilling muds. The UltraBrasion cover is designed to handle external...

Black Gold Products Rotary Vibrator 7500 Sour Service Hose I.D. RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between pump and standpipe for pumping mud at extra high pressure in oil drilling and exploration work. Meets the severe demands of today’s drilling methods including directional drilling, pressure pulses and elevated temperatures. The tube is designed to handle abrasive, corrosive and oil based drilling muds. The UltraBrasion cover is designed to handle external damage from abrasion, corrosion, gouges, oil and weather. Hoses are manufactured to...

Table of Contents Section F or Oilfield Hose and Industrial Service Hose specifications, refer to the Gates Industrial Hose, Couplings & Equipment catalog (#39496-000). F or Hydraulic Hose and Equipment (Crimper) specifications, refer to the Gates Hydraulic Hose, Couplings & Equipment catalog (#35093).

Gates Worldwide Locations Gates Corporation 1551 Wewatta Street, P.O. Box 5887 Denver, Colorado 80217-5887 Tel: (303) 744-5070 Fax: (303) 744-4540 Gates Rubber Co. (S) Pte. Ltd. No. 1 Changi South Street 3 Singapore 486477 Tel: 65-545-3800 Fax: 65-545-5322 Gates Canada, Inc. 225 Henry Street, Bldg. #8 Brantford, Ontario, N3S 7R4, Canada Tel: (519) 759-4141 Fax: (519) 759-0944 The Gates Group (Shanghai) Co., Ltd. No. 15 Hai Tang Street China-Singapore Suzhou Industrial Park Suzhou 215021, PR China Tel: 86-521-6761-9633 Fax: 86-512-6761-7184 Gates de Mexico, S.A. de C.V. Cerrada de Galeana...

Super Choke & Kill or 15,000 W.P. Cementing Hose Request for Quote/Order Form 1.  You must fill in all the information on the form in order to have your quote request/order processed. Any missing information can lead to costly delays in processing your request. If there are any questions about any part of the form or the application, check details with your oilfield customer, or call Ron Trujillo at 303-744-4735. The Date, Customer Name, P.O.# (if actual order) must be completed. Hose Type is Super Choke & Kill or 15,000 W.P. Cementing. Hose Size is the Hose I.D. Fill in Overall Length of...

Quote/Order Form S C&K or CEMENTING HOSE REQUEST FOR QUOTE \ ORDER Hose Size Hose Type _ Safety Clamp & Chain □ S C&K Hose 15,000 psi W.P. - 22,500 psi test - Spec 475SL □ Cementing Hose 15,000 psi W,P, - 22,500 psi test - Spec 4758L Overall Length Working Pressure Add-On Fittings (will be furnished welded) | TPC: Working Pressure. Working Pressure _ Nominal Size Pipe Size_ HAMMER UNION-MALE SUB/NUT Pipe Size. Nominal Size. Nominol Size Working Pressure .Nominal Size. Working Pressure _ Pipe Size _ HAMMER UNION-MALE SUB/NUT Pipe Siie. Nominal Size. CERTIFICATIONS /STANDARDS * =Request...

Gates High Performance Dynamic Pressure Rated Rotary Hose Assemblies To keep pace with rapidly advancing drilling technology involving directional drilling and down-linking with negative pressure pulses, Gates offers a high performance API 7K rated rotary hose assembly that far exceeds minimum standards. In addition to a high quality hose construction, the Gates system has a swage attached coupling with no seals to leak and no set screws to loosen with operation vibrations or epoxy to weaken with working temperatures above 180°F. Burst test results significantly exceed the API 7K minimum...

Gates Oilfield Hose Flow Rate Limits On some oil rigs, the flow rate of mud to the drill pipe has been increased significantly. Flow rates as high as 3,100 GPM have been reported. Three pumps aligned to work together can be set up to produce the higher flow rate. Replacing these expensive components more frequently is compounded with the additional service downtime. There are factors that need to be considered to safely and cost effectively provide such a high flow rate. As flow rate (GPM) increases, velocity of that fluid through a conduit such as a hose or a pipe will also increase. As...

Safety & Maintenance of Gates Oilfield Hose Assemblies Foreword The objective of this manual is to emphasize SAFETY by providing recommended procedures for proper handling, storage, use and maintenance of Rotary/Vibrator/Choke & Kill/BOP hose assemblies. External inspection and field pressure testing prior to any continued service of a hose assembly is critical to ensure safe operation. These are MANDATORY PROCEDURES for applications where an assembly failure could result in serious bodily injury or severe property damage. Scope This procedure is a recommended practice for the storage,...

Safety & Maintenance of Gates Oilfield Hose Assemblies Storage 1. ompletely drain hose assembly before C placing in storage. Caution: Care should be exercised to prevent mishandling. Crushing or kinking of hose can cause severe damage to reinforcement. If this occurs, remove hose from service and then contact local Gates representative for further advice. 2. henever feasible, store hose in original W shipping crate. This will provide extra protection against the deteriorating effects of solvents, corrosive liquids, ozone and sunlight. Hose should be stored so coils are in a horizontal...

Safety & Maintenance of Gates Oilfield Hose Assemblies Recommended Practices Where applicable, the following recommended practices should be used on rotary drilling and vibrator hose. A. Overall Hose Length 1. ncludes standard connector and/or I special adapters (see Figure 3). B. Rotary Hose Length 1. n order to avoid kinking hose, the I hose length and standpipe height should be such that when raising or lowering, as in making mouse hole connections, the hose must not exceed the rated minimum bend radius at the swivel when it is at its lowest drilling position and at the standpipe when it...

Safety & Maintenance of Gates Oilfield Hose Assemblies D. Vibrator Hose Length 1. It’s important to choose a vibrator hose having an inside diameter equal to that of the pump discharge fitting and the fluid supply line inside diameters. This is necessary to allow free flow of fluid and to avoid turbulence or unnecessary abrasion of the hose tube. The length of vibrator hose should be given careful consideration. It should be long enough to prevent kinks near the couplings, yet short enough to prevent kinks in the radius near the middle of the hose. E. Hose Connections 1. ine pipe threads...

Safety & Maintenance of Gates Oilfield Hose Assemblies Operations Caution: Care should be exercised during operation to prevent crushing or kinking of hose. Crushing or kinking can cause severe damage to cable reinforcement. If this occurs, remove hose from service and test as outlined in the “Field Test Pressure” section. A. Working Temperature 1. orking temperature should not W exceed the rating of the hose. Temperatures encountered higher than the rated temperature will reduce hose life expectancy. B. After Coolers 1. ompressors should always be C equipped with after coolers to lower the...