oilfield term kelly hose price

The main advantage of a kelly hose is that it helps you move water from one point to another without much struggle. Hose pipes are also versatile and can be used for various activities in your home or at your workplace. Moreover, rubber horse pipes are durable since rubber is a strong material. This means that you won’t need to replace it often. Additionally, rubber hoses are less prone to cuts and abrasions. Another advantage of this hose pipe is that it absorbs shocks and vibrations. Also, there is no need for specialized bending or brazing since it can bend easily. Lastly, it reduces pressure surges and lubricates itself.

When buying a kelly hose, there are several factors that you need to consider, including length, couplings, thickness, and price. The length of the kelly hose is an important factor to consider. If you are taking the water to the furthest corner of your compound, consider getting a longer pipe for convenience. Also, if you are watering a large garden, a longer pipe will serve you better. Couplings or horse pipe fittings are also another important consideration. These are the accessories that help you connect your pipe to the water source. They can either be made from brass or plastic. Some people prefer plastic couplings since they are lightweight, but they can break easily. Brass fittings are heavier but long-lasting. Lastly, consider the thickness of the pipe. This refers to the number of layers used to make the kelly hose. Thickness determines the weight of the pipe and ease of bending.

For a wholesale kelly hose, visit Alibaba.com. This online shopping platform offers a wide range of rubber hoses that suits your needs. Visit the website at any time and place your order.

High Pressure Drilling Rotary Hoses is used in drilling and exploration work. Suitable for hydraulic fluids, such as hydraulic oil, fuel oil, lubricants, emulsion, glycol and water.Drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake. To transmit high pressure oil or water based mud.

Recommended For:Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

All shipments will be made F.O.B. shipping point. Qualified orders will be shipped prepaid to one destination served by common carrier within the Continental United States. NRP Jones will select the shipping point, routing, and carrier for all prepaid shipments. Hydraulic hose and fitting back orders will be shipped prepaid, provided the original order qualified for prepaid freight. Add-on orders will not qualify for prepaid freight.

Accredited Investor - A person or institution deemed capable of understanding and affording the financial risks associated with the acquisition of unregistered securities. The federal securities laws define the term accredited investor in Rule 501 of Regulation D as:a bank, insurance company, registered investment company, business development company, or small business investment company;

a natural person with income exceeding $200,000 in each of the two most recent years or joint income with a spouse exceeding $300,000 for those years and a reasonable expectation of the same income level in the current year; or

Anticline - A geological term describing a fold in the earth"s surface with strata sloping downward on both sides from a common crest. Anticlines frequently have surface manifestations like hills, knobs, and ridges. At least 80 percent of the world"s oil and gas has been found in anticlines.

Completion - A general term referring to all activities necessary to put a well on production after it has been drilled to casing point. The completion phase of operations generally includes cleaning out the well bore, setting the casing and tubing into the hole, adding surface equipment (pumps, tanks, meters) and perforating the casing so that oil or gas can flow into the well and be brought to surface. Once a well is completed, it is ready to produce oil or gas.

Conditions of Sale - The legal terms that govern the conduct of an auction, including acceptable methods of payment, terms, buyer"s premiums, possession, reserves and any other limiting factors of an auction. They are usually included in published advertisements or announced by the auctioneer prior to the start of the auction.

Dipmeter Survey - An oil well surveying method that determines the direction and angle of formation dip in relation to the borehole. It records data that permit computation of both the amount and direction of formation dip relative to the axis of the hole and thus provides information about the geologic structure of the formation. It is also called a dipmeter log or dip log.

Down-dip - A term used in a hydrocarbon reservoir that is not flat, i.e., a dipping formation. In such a formation, oil is found down-dip from the gas.

Drill String - The column, or string, of drill pipe with attached tool joints that transmits fluid and rotational power from the kelly bushing to the drill collars and the bit. Often, the term is loosely applied to include both drill pipe and drill collars.

Electric Log - An electrical survey made on uncased holes. A special tool is lowered into the hole which ejects an electrical current into the rock and records its resistance to the current. The data from the survey is used by the geologist to determine the nature of the rock and its contents.

Formation- A geological term that describes a succession of strata similar enough to form a distinctive geological unit useful for mapping or description.

Gas Lift - A method of secondary recovery similar to gas injection, except that the injection well and the production well are both the same well. Dry natural gas is pumped down through the space between the casing and the production tubing, and into the reservoir. Gas dissolves into the oil increasing the oil"s ability to flow, and reservoir pressure is increased around the well. The procedure of injecting gas and then flowing the oil-and-gas mixture is carried on intermittently. The gas is separated from the mixture at the surface, where it is stored for re-injection.

Joint Operating Agreement (JOA)- A detailed written agreement between the working interest owners of a property which specifies the terms according to which that property shall be developed.

Kelly Bushing (KB) - Part of the drilling rig, the Kelly is a long hollow steel bar that connects to the upper most end of the drill string. it is square or hexagonal in cross-section. The Kelly bushing is a "sleeve" in the rotary table through which the Kelly can freely move up and down during drilling. The depth to a particular zone for a well is generally measured from the Kelly bushing, which can be anywhere from about 5 to 50 feet above ground level (dependent on the type and size of drilling rig used).

Lease- A contract by which the owner of the mineral rights to a property conveys to another, the exclusive right to explore for and develop minerals on the property, for a specified period of time. The conveying party is "lessor"; the mineral rights owner. The recipient is "lessee". The terms of the lease are typically negotiated between company, and the owner of the mineral rights.

Listing Agreement - A contract executed by the auctioneer and the seller which authorizes the auctioneer to conduct the auction and sets out the terms of the agreement and the rights and responsibilities of each party.

Midstream - A term sometimes used to refer to those industry activities that fall between exploration and production (upstream) and refining and marketing (downstream). The term is most often applied to pipeline transportation of crude oil and natural gas.

Non-Accredited Investors - Persons or entities who do not satisfy one or more of the alternative definitions of the term "Accredited Investor" and who, by virtue of their financial resources acumen, satisfy the suitability standards imposed by Rule 506 of Regulation D and otherwise meet the financial investment standards therein required.

Offering Memorandum - A legal document provided to potential investors in a venture (such as an oil and gas limited partnership, Joint Venture), describing the terms under which the investment is offered.

Porosity - A ratio between the volume of the pore space in reservoir rock and the total bulk volume of the rock. The pore space determines the amount of space available for storage of fluids. These spaces or pores are where oil and gas accumulate; therefore, a formation containing a high percentage of porosity can contain more hydrocarbons.

Roughneck- One of the two or three field-hands on the derrick floor during drilling operations, whose job revolves around breaking out the drill pipe, making connections, and stacking drill pipe. It is a tough, physically demanding, and very dangerous job.

Sealed Bid- A method of sale utilized where confidential bids are submitted to be opened at a predetermined place and time. Not a true auction in that it does not allow for reaction from the competitive market place.

Secondary Recovery - A broad term encompassing any method of extracting oil from a reservoir after a well or field has exhausted its primary production. After primary recovery operations have taken their course, various operations may be taken to increase the amount of oil by normal methods of flowing and pumping. The second stage to increase production is by addressing the condition of the reservoir. Typical operation may involve forcing gas ("gas injection"), or water ("water flooding") into the reservoir. This re-pressurizes the reservoir, which allows recovery of more oil than would be possible from primary recovery.

Sedimentary Rock- Rock that is naturally formed from fragments of other rocks by compression. Sedimentary rocks are important in terms of petroleum because sandstone and limestone are often reservoir rock. Rock is generally classified in one of three categories; sedimentary, igneous or metamorphic.

Spacing- The distance between wells producing from the same reservoir. Spacing is often expressed in terms of acres, e.g., 40-acre spacing, and is often established by state regulatory agencies.

Stimulation- The term used for several processes to enlarge old channels, or create new ones, in the producing formation of a well designed to enhance production. Examples include acidizing and fracturing.

Top Lease- A conditional lease that may be granted by the mineral-rights owner of a property while a pre-existing recorded lease of that property is nearing expiration, but nonetheless is still in effect. The top lease goes into effect only if and when the existing lease expires (or is terminated).

Unit- A fixed measure of investment into a Joint Venture, the number of units offered is determined by each exploration company and project. For example, a subscription agreement may offer 20 units at $25,000 per unit.

To start drilling, a surface drill bit is attached to a bottomhole drill collar, which is in turn attached to the kelly. Once made up, the driller lowers the bit through the rotary table and engages the mud pump(s) and checks for leaks and other abnormalities. The driller lowers the drill string and the kelly bushing is set in the rotary drive bushing and the rotary is engaged. The driller then slowly lowers the bit to bottom and begins the drilling operation.

A device fitted to the rotary table through which the kelly passes. It is the means by which the torque of the rotary table is transmitted to the kelly and to the drill stem. Also called the drive bushing.†

Here at TIOT, we pride ourselves in only selling high-quality, new and refurbished oilfield tools and equipment. We carry a wide range of oilfield tools for sale and rent, including: elevators, power tongs, power units, tong test stands, casing running tools, casing tools and rotary tools. We repair, recertify and test all of our drill pipe and casing handling equipment in house including inspecting, welding, machining, MPI and load tests. We’re API and ISO Certified from the American Petroleum Institute. Texas International Oilfield Tools stocks and distributes for several manufactures including Alltorque, ConTech, Tesco, McCoy, Starr, and Volant. Explore our wide range of tubular running equipment and pipe handling tools today!

Texas International Oilfield Tools stocks its own inventory of new, used, reconditioned and certified tools and equipment. With our 30 years in the industry we have a huge network to provide any drill pipe, tubular or casing tool needed for your operations. Call us Today!