oilfield term kelly hose pricelist

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

All shipments will be made F.O.B. shipping point. Qualified orders will be shipped prepaid to one destination served by common carrier within the Continental United States. NRP Jones will select the shipping point, routing, and carrier for all prepaid shipments. Hydraulic hose and fitting back orders will be shipped prepaid, provided the original order qualified for prepaid freight. Add-on orders will not qualify for prepaid freight.

The complexities of the oil and gas industry can make keeping up with all the terms and definitions related to drilling difficult. To simplify things, we’ve compiled a glossary of the most important terms related to drilling and to the oil and gas industry.

A test of oil mud to determine if the aniline point temperature (aninline point) of the oil will damage elastomers (rubber compounds). The aniline point corresponds to the amount and type of hydrocarbons found in an oil sample, so a low aniline point indicates higher aromatics, and vice versa.

Also known as “As Is, Where Is” and “In Its Present Condition”, “As Is” states there are no guarantees about the condition or usage of the property. The buyer is responsible for determining its condition and use cases.

Paid to the lessor by the lessee, this consideration extends the oil and gas lease terms when there is no operations or production. The payment typically gives the lessee another year, however, if no payment is made and operations cease, the lease is considered abandoned.

Also called a dip meter or dip log, this surveying method determines the direction and angle of a formation dip in relation to the borehole to provide geological structure of the formation.

Transmits fluid and rotational power from the kelly bushing to the drilling collar. As the name suggests, the drill string is a column, or string, with attached tool joints.

Used by geologists to determine the nature of rocks, a special tool is used in an uncased hole that outputs electrical current into the rock and records the rock’s resistance.

A long hollow steel bar that’s used to connect the upper end of a drill string. Kelly bushing is a sleeve in the rotary table that allows the Kelly to freely move up and down during drilling. Kelly bushing also plays a part in the measurement of well depth, as well depth is measured from the Kelly bushing, down to the bottom of the well.

A contract between the mineral owner and the company interested in drilling that gives the interested company rights to explore and produce oil and gas for a specified term. The lease is usually given for royalty payments in return.

The machine used to drive rotational power to the drill stem while still allowing vertical movement of the pipe for rotary drilling. Most moden rotary machines have a rotary or master brushing used to turn the kelly bushing, which then allows vertical movement of the kelly while the stem is turning.

Table of Contents Oilfield Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Well Completion Applications . . . . . . . . . . . . . . . . . . . . . . . 3 Additions & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Engineering & Services . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safe Hydraulics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Certifications & Standards . . . . . . . . . . . . . . . . . . . . . . . . . 8 MTR Data Book...

Oilfield Applications Drilling Mast Mast Base Pipe Handler Pipe Rack Draw Works Service Crane Water Tank Power Unit Fuel Tank Choke Manifold Drill Floor Emergency Generator Gates solutions can be found on virtually every part of a drilling rig.

Well Completion Applications FRAC FLEET Hydraulic fracturing fleets can consist of a variety of oilfield service trucks that feature applications in which Gates can be a solutions provider. 6 BLENDER TRUCKS WATER TRANSFER SYSTEM HYDRATION UNIT PUMP TRUCKS

Additions & Modifications PRODUCT All Gates Industrial Hoses Gates is excited to announce the revolutionary Efficiency Engineered program with a new naming system for industrial hose. All of the products in this catalog will start using the new descriptive and intuitive names. But don"t worry, the previous names will be included on all catalog pages and product labels for reference during the transition. Black Gold Rotary Vibrator 7500 Grade E Low Temp Black Gold Rotary Vibrator 5000 Grade D Low Temp Flexible connection between standpipe and top drive/swivel or between pump and standpipe...

Engineering & Services Gates delivers premium Engineering & Services to decrease downtime, increase safety for the oil & gas market, and foster risk management. It only takes one hose-related incident on a rig to shut down your an entire operation. Gates E&S is dedicated to providing worldclass products and support services to minimize downtime. Gates Hose Management System (GHMS) Hose management is key in maximizing production. The Gates Hose Management System is a comprehensive Lifecycle Management System for critical hose assemblies. Contact your nearest Gates E&S location to help...

Safe Hydraulics WHY PREVENTIVE MAINTENANCE? There are several valid reasons to begin a preventive maintenance program. Costly emergency repairs, production downtime and worker safety are just a few.The main objective of a preventive maintenance program is to identify component weaknesses before failure and loss of production. Some believe that PM actually should mean “predictive maintenance” rather than “preventive maintenance.” Preventive maintenance is especially important with hydraulic products. The high pressures and temperatures associated with hydraulics make hose and fitting...

Safety Connections Industrial hose applications become more demanding every day. New rubber compounds, higher working pressures and temperatures, stricter environmental and safety regulations – all make hose and coupling selection a challenge.The traditional industry practice of mixing and matching hoses and fittings from different manufacturers carries greater risk than ever. Poor quality or incorrectly fabricated hose assemblies cause equipment damage, lost productivity, personal injury, or worse. GATES E2E (END-TO-END) ENGINEERED SYSTEM AND DISTRIBUTOR PARTNERSHIP To mitigate risk and...

Efficiency. Engineered MORE THAN JUST NAMES Most industrial hose naming systems spawn confusion, so relating them to products and applications becomes a difficult, time consuming chore. Plus, the risk of choosing the wrong hose for the job may compromise safety, performance, and the customer"s trust. We"re making our industrial hose naming system more efficient and user-friendly. This running change uses descriptive and intuitive names. All our industrial hoses are now named "Master." The "Master" name is linked to an industry or application [ag, chem, mining, etc.), so you can tell...

Black Gold Products Rotary Vibrator 7500 Grade E Hose I.D. (ln.) RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between pump and standpipe for pumping mud at extra high pressure in oil drilling and exploration work. Meets the severe demands of today’s drilling methods including directional drilling, pressure pulses and elevated temperatures. The 3/16” thick tube is designed to handle abrasive, corrosive and oil based drilling muds. The UltraBrasion cover is designed to handle external damage from abrasion, corrosion, gouges, oil and weather. CAUTION: Field...

Black Gold Products Rotary Vibrator 7500 Grade E Low Temp Hose I.D. BLACK GOLDTM ROTARY VIBRATOR 7500 GRADE E LOW-TEMP RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between pump and standpipe for pumping mud at extra high pressure in low temperature oil drilling and exploration work. Meets the severe demands of today’s drilling methods including directional drilling, pressure pulses and elevated temperatures. The 3/16” thick tube is designed to handle abrasive, corrosive and oil based drilling muds. The UltraBrasion cover is designed to handle external...

Black Gold Products Rotary Vibrator 7500 Sour Service Hose I.D. RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between pump and standpipe for pumping mud at extra high pressure in oil drilling and exploration work. Meets the severe demands of today’s drilling methods including directional drilling, pressure pulses and elevated temperatures. The tube is designed to handle abrasive, corrosive and oil based drilling muds. The UltraBrasion cover is designed to handle external damage from abrasion, corrosion, gouges, oil and weather. Hoses are manufactured to...

Onshore and offshore, today"s drilling environments demand the most advanced products, superior performance, and excellent service. Oil field hoses consists of High Pressure hoses, Rotary, Kelly, Vibrator, and Mud Pump hoses, Cementing hoses, Choke and Kill hoses, Blow Out Preventer (BOP) hoses, and Petroleum and Fuel Transfer hoses.

High pressure oil field hoses range from 2" ID up to 5" ID with a wide range of available end connections. These hoses are built strong and are designed to last.

Choke hoses and kill hoses are commonly grouped together as Choke & Kill hoses. These hoses are usually 2" to 3-1/2" ID armored hoses designed to survive those critical moments when a well experiences trouble. More dangerous environments commonly call for fire rated Choke & Kill hoses which can survive even longer if things really get out of hand.

Rotary drilling hoses which are commonly referred to as Kelly Hoses are used on the drilling rig as high pressure, flexible rubber, steel reinforced hoses used to connect the standpipe to the swivel or top drive. Made of heavy duty rubber and steel cables the rotary hose flexible piping allows the Kelly, the bit, and drill string to be raised and lowered while the drilling fluid is pumped through. The lowering of the drill string while pumping fluid is crucial to the drilling process and a durable reliable hose is a most. Usually made in diameters of 2", 2-1/2", 3", 3-1/2", and 4" ID"s and in lengths starting at 4ft vibrator hoses all the way up to 91ft.

Those "fundamentals" -- a tight global oil supply, rising energy demand and steady or increasing oil prices -- will entice producers to increase output and continue to demand drilling equipment, technology and services. And they"re not expected to change anytime soon. The war in Ukraine tightened oil and gas supplies and pushed prices higher. Then, early this month, the Organization of the Petroleum Exporting Countries and its alliessaid they will cut production, which could keep oil prices elevated.

“Weatherford has started to think in terms of customer service and customer value,” Mittal said. “But for them to be successful, they need to have a relentless focus on it. It can"t be just one among many things -- they need to not get distracted with everything else, they have to be 100 percent customer focused and everything else is subordinate to that.”

Reinforcing our capability to meet the growing demand forLarge Diameter Hose (LDH), JGB Enterprises, Inc. has decided to expand our production capabilities to include 12” crimping.

With our continued development and support of the energy exploration market, JGB Enterprises, Inc. has invested in the Techmaflex PES-500 Large Bore Hose Assembly Machine.

We feel this investment will lead the energy exploration market to the next level. We also look forward to this investment opening more opportunities in markets where the need for safety of crimped large diameter hoses exists.