garlock mechanical seal brands

KLOZURE® Mechanical Seals are engineered to meet the demands of challenging sealing applications. Through the innovative use of materials, configurations, and custom designs for pumps, mixers, and agitators, KLOZURE® Mechanical Seals can handle abrasive, viscous, or adhesive media. KLOZURE®’s high-performance seals minimize equipment downtime, environmental leakage, and lost product.

To improve pump and mixer time between overhauls and reduce the total cost of ownership of specialized equipment, utilize the engineering and materials expertise of the KLOZURE® Mechanical Seal Family. Ideal for Food, Pharmaceutical, Pulp and Paper, Asphalt, and Chemical Production, the KLOZURE® Mechanical Seal portfolio is infinitely customizable.

KLOZURE® Mechanical Seals with P/S Technology utilize flexible GYLON elements for a non-clogging design perfect for abrasive, viscous, or adhesive media, as well as offering high run-out capable solutions.

The P/S®-II seal is a cartridge mounted, multi-lip seal, which is designed to seal those thick, viscous, temperature-sensitive products that create problems for face seals. The P/S®-II seal is extremely successful sealing positive displacement and centrifugal pumps within the published operating limits. The seal is not recommended in applications where the sealed product contains solids. Simple repair kits available.

GYLON high-performance PTFE material gives you a tight seal for reduced leakage and more uptime, even in the most challenging chemical and corrosive environments.

The Style 85 seal is similar to the P/S®-I seal in that it is a single or multi-lip seal in a single casing. Because each seal is machined, it can be manufactured in various sizes and configurations without special tooling requirements. Style 85 is o-ring mounted, so it can be installed and removed without damage.

A double cartridge mounted face seal which is both stationary and balanced, which can be used in higher pressures and at higher speeds than unbalanced alternatives. it can be used with a pressurized barrier fluid (double seal applications) or unpressurized buffer fluid (tandem applications). The GMP-II seal is available in a wide range of materials to suit the application requirements.Minimum Shaft Diameter: 1.000 in. / 25.4 mm

KLOZURE is the industry leader in high performance large bore seals. Our heavy-duty seals protect critical equipment, preventing premature failure due to lubrication loss or contamination.

When up-time in your plant is critical, trust the MILL-RIGHT® family of elastomer materials to keep you running. MILL-RIGHT materials are engineered to have the highest abrasion resistance and lowest wear of any seal in the industry. This translates to higher equipment efficiencies, longer bearing life, increased production, and less maintenance.

Garlock"s portfolio of innovative products deliver solutions that solve unique sealing challenges, improve plant productivity, reduce costs, and help our customers comply with increasingly stringent environmental regulations.

Garlock"s KLOZURE brand of dynamic seals are designed, manufactured, and tested to ensure long life, safety, and value. KLOZURE seals are available in a wide variety of configurations to meet the challenging requirements of major industries around the world.

With decades of experience solving demanding rotating equipment sealing challenges, you can depend on KLOZURE to provide solutions that are specifically engineered to be durable and cost effective.

Whether your challenge involves the cost of maintenance, harsh operating conditions or high levels of dependability, you can count on Garlock to back our KLOZURE solutions with world class engineering, top quality materials, industry leading application support, and global distribution networks.

The PK Seal features a single spring rubber bellows that will not wear the shaft or sleeve. It fits into shallow stuffing boxes and the flexible rotary face floats to compensate for misalignment.

Garlock is proud to offer technical training from our engineering experts throughout the year. From our multi-session Garlock Fluid Sealing Academy series to our Garlock Technical Insight sessions, we make sure you have the knowledge you need to select, install, and troubleshoot your Garlock products.

Where others fail, PS-SEALs reliably seal rotating shafts at high circumferential speeds, high pressures, and extreme temperatures. PS-SEAL"s excellent chemical resistance makes it well suited for food and pharma applications, including those where FDA approval is required.

Available in a wide variety of standard or custom styles and materials, the PS-SEAL utilizes high-performance GYLON® modified PTFE to maintain contact between the seal and shaft. The result is a seal that can withstand pressures up to 50 times that of standard lip seals, surface speeds up to 45 m/s, and temperatures up to 500º F (260ºC), in both dry and abrasive environments.

A double seal utilized as the critical seal in a broad range of equipment in the industrial market including industrial fans and autoclaves. The Syntron RP seal has also proven to be highly effective on propeller shafts and thrusters in the marine industry.

Depending on the process and the fluid to be pumped, the Garlock Klozure engineering staff will assist you in selecting the best materials for the following key components:Metallurgy: 316SS

The PS-SEAL® product line stands for reliable sealing of rotating shafts at high circumferential speed, high pressure and extreme temperatures. Abrasive media is sealed as well as aggressive media. Radial shaft seals typically do not perform well under these conditions as their seal lips are made of elastomeric materials. PS-SEALs are used in many different applications and can also be an alternative to mechanical seals and braided packings. The product line PS-SEAL® offers cost-effective and practical solutions to a wide range of applications. The portfolio of Garlock shaft seals offers standardized as well as special customized seals. The high performance seals PS-SEAL® work with a sealing lip made of GYLON® or other modified PTFEs. Garlock produces GYLON® in a process that has been specially developed.

Learn how Garlock became a multinational manufacturer of high-performance fluid sealing and pipeline solutions with an emphasis on safety, longevity, and productivity.

See what"s new in Garlock news, including product releases, new case studies, technical articles, upcoming webinars, holiday plant schedules and more.

Support your Garlock marketing and sales efforts with high quality printed marketing materials and information kits. Search materials and order directly online.

The PS-SEAL® product line stands for reliable sealing of rotating shafts at high circumferential speed, high pressure and extreme temperatures. Abrasive media is sealed as well as aggressive media. Radial shaft seals typically do not perform well under these conditions as their seal lips are made of elastomeric materials. PS-SEALs are used in many different applications and can also be an alternative to mechanical seals and braided packings. The product line PS-SEAL® offers cost-effective and practical solutions to a wide range of applications. The portfolio of Garlock shaft seals offers standardized as well as special customized seals. The high performance seals PS-SEAL® work with a sealing lip made of GYLON® or other modified PTFEs. Garlock produces GYLON® in a process that has been specially developed.

The PS-SEAL® product line stands for reliable sealing of rotating shafts at high circumferential speed, high pressure and extreme temperatures. Abrasive media is sealed as well as aggressive media. Radial shaft seals typically do not perform well under these conditions as their seal lips are made of elastomeric materials. PS-SEALs are used in many different applications and can also be an alternative to mechanical seals and braided packings. The product line PS-SEAL® offers cost-effective and practical solutions to a wide range of applications. The portfolio of Garlock shaft seals offers standardized as well as special customized seals. The high performance seals PS-SEAL® work with a sealing lip made of GYLON® or other modified PTFEs. Garlock produces GYLON® in a process that has been specially developed.