double life mud agitator in stock

Double Life Mud Agitators are used within the Oil and Gas, Horizontal Directional Drilling (HDD), Chemical, & Water Well Drilling industries. Double Life manufactured Mud Agitators utilize the benefits of a USA Made Helical Bevel Gear Box with Heavy Duty Bearings, Solid Shafts, Keyless Couplings, Synthetic Oil, & Canted Impeller Blades. These Agitators are low maintenance and keep your pits continually in motion. With our low clearance and ease of service, our mud agitators are an easy choice for a contractor!

Derrick mud agitators include an explosion-proof, “C” faced motor, reduction gearbox (helical-bevel gears for horizontal agitators or all helical gears for vertical units), impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

Attaching the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Derrick agitators to do the same work at far less horsepower. By unitizing the motor and gearbox, weight and space requirements are reduced. Horsepower, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights. Available horsepower ratings* are: 5, 7.5, 10, 15, 20, 25, and 30.

As an SPX FLOW brand, Lightnin serves the challenging waste and water treatment sector, as well as the processing of solvents, fertilizers, food/beverages, pharmaceuticals and biofuels. The mixers and agitators, that are custom designed and fabricated, are used for equalization, neutralization, flocculation, aeration, sludge mixing, flash mixing and general blending purposes. The Lightnin industrial mixer portfolio covers both portable and larger fixed-mount units. All Lightnin equipment is designed to provide prolonged trouble-free operation regardless of the specific application demands. Through the proprietary gearbox and impeller technologies developed in recent times, we can offer the market advanced mixing solutions that are far more compact and power-efficient than ever before. They also have significantly greater operational lifespans, thanks to anti-fouling mechanisms and other state-of-the-art features. Consequently, customers are able to raise their productivity levels and avoid costly downtime issues, while also keeping the energy consumption involved to an absolute minimum.

When you need to gain rapid access to the essential wholesale mud agitator supplies that your business relies on, head to Alibaba.com where you"ll find thousands of Chinese wholesalers ready to provide the equipment, materials, consumables and products that you need to run your business. From mud agitator supplies that cover all technical specifications through to associated products and office consumables, you can buy everything that your business needs in one place at Alibaba.com.

Simply use the search filters and categories to swiftly find details of mud agitator prices, specifications, order volumes, lead times, discounting arrangements and more. See what other customers thought of individual wholesalers with the customer review feature and see images of operations, markets served and more. You can even chat instantly with sales and support or send an email at any time of day.

Ready to make your mud agitator order? Just do so in a few clicks in your private account area and you"ll receive regular updates on your shipment so that you know exactly where it"s at in the world until it arrives at your business! It"s swift, convenient and cost-effective to shop at Alibaba.com where you"ll find everything that your business needs to operate smoothly and without delay.

MAX2000 PROGRESSIVE CAVITY PUMPS The MAX2000® Progressing Cavity Pumps feature highly reliable pumping characteristics that allow the user to monitor fluid rates with precision in applications from environmental remediation to food service industries. Our unit’s proprietary double-seal pin joint available only in MAX2000® Progressing Cavity Pumps—virtually eliminates the possibility of contamination at this vulnerable connection. Its

Hydroman™ Electric Submersible Slurry Pumps with Agitator for Pumping Mud are capable of handling municipal applications for sewage and slight sludges, especially those resulting from residential or refining processes. Submersible Sludge Pump with industrial strength, sludge pumps are a perfect choice when pumping water with a high solids content, up to 80mm diameter such as many types of mud sludge and light slurry. These submersible sewage sludge pumpsare typically used for sewage dewatering, waste water as well as sand, mud/sludge and slurry dewatering, in addition submersible sludge pump can be supplied with integrated agitators these feature is quite useful when handling large concentrations of solids as it"s specifically designed for keeping solids in suspension and as a result maintaining the pump"s inlet unclogged consequently avoiding impeller blockage. Submersible sludge dredging pump can be widely used in industry, mine, agriculture, environment protection, building construction, such as drainage slurry, mortar, wastewater, and sewage containing flocks, paper scraps, mud and sand and other solid particles and available in three phase in both 50 and 60 Hz.

Shaft: The shaft has been designed to be as short as possible, reducing deflection and vibration. This extend the life of the mechanical seals, bearings and reduces operational noise.

THE DOUBLELIFE MUD AGITATORThe Double Life Mud Agitators combine heavy duty design, dependability, low maintenance and easy access to parts for the contractor. This makes the Double Life Agitator the right choice for the customer. High torque combined with service factors well beyond industry standards gives the Double Life Agitator the ability to perform at levels necessary to suspend drill solids throughout the mud system. The Double Life Agitators use explosion proof class 1, group D, electric motors that are directly coupled to Grove heavy duty g~ boxes. Solid machined steel shafts designed to operate well below their first critical speed will easily withstand excessive l tensile and shear stress placedon them in drilling applications. Double Life uses heavy welded steel bases to avoid any deflection or vibration transmission which could cause misalignment or premature failure of couplings or bearings. Double Life 4npellers are designed to give optimum performancein mixing and solid suspension, 60 degree axial design has proven most effective in pits with depth over four feet. Other impellersare availablefor special applications. In all, when contractorscall for an efficient and extremely durable Mud Pit Agitator, call for Double Life.

Mud Mixer Selection(Refer to chart on page 3) 1. Dete11IWIe the heaviest mud to be suspended. 2. - Determine tank sizes using equal dimensions for length and width. Depth and width should not exceed length. Example 1: 10" x 30" Tank. .

MUD AGITATOR INSTALLATION: (1) MAKE CERTAIN THE MOUNTS IN WHICH THE AGITATOR WILL REST UPON ARE HEAVY AND SECURE ENOUGH TO SUPPORT THE WEIGHT AND TORQUEOF THE AGITATOR. (2) THE AGITATOR BASE IS MOUN:rED AND SECURED WITH FOUR BOLTS,NUTS, AND LOCKWASHERS. THE IMPELLER SHAFT SHOULD NOW BE COUPLEDTO THE GEARBOXSHAFT. (3) CHECK THE ELECTRIC MOTOR FOR PROPER VOLTAGE WIRING. THE DOUBLE LIFE AGITATORS ARE WIRED 460 VOLTS UNLESS SPECIFIED OTHERWISE. (4) THE IMPELLER SHOULD ROTATE CLOCKWISE WHEN VIEWED FROM THE TOP. IF THE ROTATION IS INCORRECT, SWITCH ANY TWO LEAD WIRES AT THE STARTERTO REVERSETHE ROTATION. (5) CHECK THE OIL LEVEL. OIL SHOULDBE FILLED TO THE BOTTOMEDGE OF OIL LEVELPLUG USING THE LUBRICANTSPECIFIED. GEAR DRIVE MAINTENANCE (1) A WORM GEAR RUNS HOT DURING THE FIRST FEW DAYS OF OPERATION. THERE IS NO CAUSE FOR ALARM UNLESS THE TEMPERATURE OF THE GEAR DRIVE EXCEEDS 200 DEGREES FAHRENHEIT(93 DEGREESCELSIUS). (2) THE FIRST "OILCHANGE SHOULD BE MADE AFTER 100 HOURS RUNNING TIME. AFTER THE FIRST OIL CHANGE, WE RECOMMEND THE OIL BE CHANGEDEVERY 1,800HOURS OF RUNNINGTIME. (3) GREASETHE TOP BEARINGEVERY 100OF RUNNINGTIME WITH A GOOD HIGH TEMPERATURELITHIUMBASED GREASE.. (4) THE GEAR BOX HAS BEEN TESTED AND ADJUSTED AT THE FACTORY. DO NOT DISMANTLE OR REPLACE COMPONENTS WHILE THE UNIT IS STILL UNDERWARRANTY. (5) CHECK OIL LEVER OF GEAR DRIVE ON A DAILY BASIS. lOlL LEVEL IS LOW, ADD LUBRICATIONTHROUGHTHE FILLER PLUG UNTIL IT COMES OUT THE OIL LEVELPLUG. (6) IF UNIT HAS BEEN SPECIAL ORDERED WITH SYNTHETIC OIL, DO NOT MIX COMPOUNDEDOIL AND SYNTHETICOIL IN REDUCER. (7) INSPECTVENT PLUG OFTEN TO INSUREIT IS CLEAN AND OPERATING."

DESCRIPTIONBASE XX HP 1800 RPM MOTOR COUPLING GUARD COUPLING COMPLETE MOTOR TO GEARBOX BUSHING, MOTOR SIDE BUSHING, GEAR BOX SIDE FLEXIBLE COUPLING INSERT GEARBOX WITH OIL FE-XXXX-20-1 COUPLING COMPLETE GEARBOX TO SHAFT COUPLING, TOP HALF, MALE COUPLING BOTTOM HALF, FEMALE BUSHING, SHAFT, GEARBOX SIDE BUSHING, SHAFT, IMEPLLER SIDE SHAFT FOR MUD AGITATOR IMPELLER FOR MUD AGITATOR BUSHING, IMPELLER TO SHAFT WELD-IN FLANGE FOR IMPELLER MUD AGITATORXXHP. 20-1 GEAR RATIO BEARING, GEARBOX INPUT MOTOR BEARING, GEARBOX LOWER OUTPUT OILSEAL, INPUT GEARBOX OILSEAL, OUTPUT GEARBOX OIL, GEARBOX (ARTIC CLIMATE) OIL, GEARBOX (COLD CLIMATE) OIL, GEARBOX (HOT CLIMATE) BEARING, GEARBOX INPUT FAN END BEARING, GEARBOX UPPER HOUSING

ITEM # DESCRIPTION 1 GEAR HOUSING 2 INPUT COVER (SEAL) 3 INPUT COVER (BEARING) 4 INPUT COVER GASKETS 5 INPUT SHAFT 6 INPUT BEARING (CUP) 7 INPUT BEARING (CONE) 8 INPUT OIL SEAL 9 HEX HEADCAPSCREW 10 LOCK WASHER 11 OUTPUT COVER (SEAL) 12 OUTPUT COVER (BEARING) 13 OUTPUT COVER GASKETS 14 SINGLE OUTPUT SHAFT 15 DOUBLE OUTPUT SHAFT 16 WORM GEAR 17 GEAR KEY 18 GEAR SPACER 19 OUTPUT BEARING (CUP) 20 OUTPUT BEARING (CONE) 22 OUTPUT OIL SEAL 23 HEX HEAD CAPSCREW 24 LOCK WASHER 25 VENT PLUG. 26 PIPE PLUG 29 PROTECTIVE PLUG .. * 3 HORSEPOWER 5 HORSEPOWER 7.5 HORSEPOWER 10 HORSEPOWER 15 HORSEPOWER 20 HORSEPOWER

GN Solids Control high speed decanter centrifuge is widely used for low gravity drilling mud solids control (LGS). The most popular size decanter centrifuge for drilling mud solids control system is 14 inch bowl.

The high speed decanter centrifuge and low speed decanter centrifuge are fixed speed control. GN Solids Control also make variable speed control decanter centrifuge which can fix for both high gravity solids removal and low gravity solids removal. Besides drilling mud solids control, GN Solids Control decanter centrifuge can also used for drilling waste management.

The major liquid and solids separation equipment GN Solids Control can offer: shale shaker, mud cleaner, desander, desilter, decanter centrifuge, mud agitator, …

Complete mud system GN Solids Control makes: various sizes solids removal unit and mud recycling system for various kinds of drilling activities, like for HDD, CBM, piling, pipe-jacking, etc…

The basic function of the Shale Shaker is to provide primary solids removal from both oil based mud (OBM) and water based mud (WBM) during drilling operations.

Selection of screen mesh for a particular application depends on a number of factors: flow rate, fluid condition, formation, rate of penetration (ROP), fluid type and number of shakers. The finest screen possible is to be used to ensure optimum performance to the relative screen life. However, coarser screens give higher capacity.