mud agitator brandt price

The skid mounted MA-RG agitator is compact, and its low profile reduces headroom requirements and provides more layout space on top of the tanks. The gearbox is a triple-reduction helical-bevel gear drive system that reduces the rotational speed of the motor to drive the impeller(s). Up to 95% mechanical efficiency helps reduce horsepower requirements.

Impellers are available with flat blades (radial flow), contour blades (axial flow), and canted blades (radial/axial flow). The impellers are sized according to tank volume and expected duty. Active mud system compartments—such as solids removal sections, mud mixing sections, and slug pits, which need a higher shear force to produce immediate mixing—are another consideration in impeller sizing.

JBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW.The drilling mud agitator is an important components for GN Solids Control drilling fluids processing system.

GN Solids Control as a professional manufacturer for soilds control equipments, we have designed lots of high-quality products, and JBQ series Agitator is one of them. To keep both the mud uniformity and the suspension of solids, the mud agitator is used to agitate the mud consecutively and reliably.This agitator agitates the mud to make cuttings, silt and sand pass the solids control system without being precipitated onto the tank bottom. Due to the simplex turbine decelerator, this product is featured by compact construction, light weight, balanced transmission, low noise, high efficiency of transmission and strong agitating power. Therefore, it is a reliable product in the solids control system.

China manufacturer GN Solids Control offer the world with drilling mud agitator equipments.We are an exporter of drilling fluid mud agitator for Indian, Russian,middle east.etc..Our factory and company are Quality Management System ISO 9001-2000 certified.GN Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution serivce.Buy drilling fluid mud agitatorfrom China manufacturer.Your best mud agitator for drilling mud circulation system.

BETTER produce high-efficiency mud agitator, equivalent to BRANDT™ Agitators MA series, its rugged design, simplicity and dependability have made it the preferred choice of a majority of operators and contractors.

requirements and provides more layout space on top of mud tanks. The triple reduction helicalbevel gear drive system reduces the rotational speed of the motor to drive the impeller(s). Up to

Mud agitators are indispensable in drilling fluid configuration. The mud agitator adopts the circular arc cylindrical worm reducer, the shaft section is a circular arc cylindrical worm, and the worm gear tooth shape is a circle that is conjugative to the worm. Therefore, the convex-concave meshing performance is reliable,...

In field of oil drilling mud treatment, drilling mud mixing equipment includes mud mixing agitator, mud mixing hooper, mud mixing tank. This drilling mud mixing equipment are assembled into a mud mixing system. Mud mixing equipment is used to add different chemical additives to drilling fluids and keep mud properties. Various...

What are the types of drilling mud agitators? Let’s first understand the classification method of mud agitators. Mud agitators can be classified according to different reducer motor connection methods, different impeller structures, different mixing media, and different uses. Different classifications have different...

Drilling mud agitator is a special agitator for oil drilling solids control. There are different specifications and models. It cannot be simply used in chemical, petroleum refining, food and other industries. How to choose a drilling mud agitator, here are 4 aspects to pay attention to. Rotating speed of drilling...

The mud agitator is generally installed on the surface of the mixing tank, and the mixing medium is mainly solid and liquid, including mud, muddy water, oil and water and other media. The mud agitator is mainly composed of motor, reducer, base, stirring rod, impeller and other spare parts. Among them, the motor and the...

In oil and gas Industry, Brightway Solids Control Company can design and manufacture the 500-700 Barrels mud pit tanks with agitators used in offshore rig to drill. As the oil drilling mud equipment manufacturer, Brightway Company can provide various mud equipment and services and supplies, such as mud shale shaker, mud...

In the oil drilling industry, there are many drilling mud agitator companies in the world, such as brandt nov mud agitator company, derrick mud agitator company, mi swaco mud agitator company. The mud agitators they produced are used in many oil field drilling mud systems, so they are famous and profecional Drilling Mud...

Liquid Mud Agitator is used for the mud tanks, trip tanks, ship tanks, mud pit. so it also called mud tank agitator, ship tank agitator, mud pit agtator.  The Liquid Mud Agitator power includes 10hp 7.5kw, 15hp 11kw, 20hp 15kw. The electric voltage is 220-240V/ 50Hz, 380-415V/ 50Hz, 440-480V/ 60Hz, 575-600V/ 60Hz. The...

Brightway is the mud agitator manufacturer in China and has the competitive mud agitator price for our customer. Mud Agitator Price is composed of two parts, one is the Mud Agitator Power you will use, and the other is the material of the impeller and length of the impeller. So if you want the details

Brighway Solids Control is one of the Mud Agitator Suppliers in the world. Mud Agitator Power includes 5.5kw Mud Agitator, 7.5 kw Mud Agitator, 11kw Mud Agitator, 15kw Mud Agitator etc. As we know, there are many good Mud Agitator Suppliers in the oilfield, such as Derrick, Brandt NOV, Swaco etc. Brightway company is also...

The VMAI series mud agitators are a vertically mounted motor with ahelical inline gearbox. They are heavy duty mechanical mixers used forviscous fluids such as drilling fluids. The gearbox utilizes a parallel helicalgear drive system that reduces the rotational speed of the motor to drivemounted impeller to maintain a homogeneous mixture of liquids and solidswithin a tank. Impeller are available with flat blades (radial flow), contourblades (axial flow), and canted blades (radial/axial flow). Blades may beinstalled in single or multiple configurations to provide desired results.Multiple sizes and locations of impeller configurations are available. Theseagitators are sized to meet all drilling rigs needs and have a large andsuccessful install base worldwide.

The MA-RG series mud agitators are horizontally mounted motor with ahelical-bevel gearbox. They are heavy duty mechanical mixers used forviscous fluids such as drilling fluids. The gearbox utilizes a helical-bevelgear drive system that reduces the rotational speed of the motor to drivethe impeller(s). MA-RG series agitators are very compact. Their low profilereduces headroom requirements and provides more layout space on top ofthe tanks. The 1:1 height to width ratio results in a lower center of gravity,providing stability and safety should the impeller encounter a sudden shockload. MA-RG agitators use a mounting skid for robust installation. Theybeing the size and mounting configuration. Multiple sizes and locations ofimpeller configurations are available. MA-RG agitators are sized to meet alldrilling rigs needs and have a large and successful install base worldwide.

motor with a helical-bevel gearbox. These agitators are considered highpurpose design for trouble free mixing. The 20BRGT Series are backed byto allow for optimal mixing with lower HP requirements. These agitatorsdesign and testing at our mixer facility to allow NOV to create more mixingwithout consuming a lot of power due to low shear and velocities. Theseand are being installed globally today along with BRANDT solids controlequipment.

Description Description Description Description The VMAI series mud agitators are a vertically mounted motor with a The MA-RG series mud agitators are horizontally mounted motor with a The XE-3 impeller is designed to provide high flow and low shear with an helical inline gearbox. They are heavy duty mechanical mixers used for helical-bevel gearbox. They are heavy duty mechanical mixers used for motor with a helical-bevel gearbox. These agitators are considered high optimized shape to maximize mechanical strength. Designed using high viscous fluids such as drilling fluids. The gearbox utilizes a parallel helical viscous fluids such as drilling fluids. The gearbox utilizes a helical-bevel tech Laser Doppler Anemometry, Digital Particle Image Velocimetry, and gear drive system that reduces the rotational speed of the motor to drive gear drive system that reduces the rotational speed of the motor to drive Computational Fluid Mixing, the XE-3 impeller is always the right choice for the impeller(s). MA-RG series agitators are very compact. Their low profile purpose design for trouble free mixing. The 20BRGT Series are backed by flow controlled processes. reduces headroom requirements and provides more layout space on top of mounted impeller to maintain a homogeneous mixture of liquids and solids the tanks. The 1:1 height to width ratio results in a lower center of gravity, to allow for optimal mixing with lower HP requirements. These agitators within a tank. Impeller are available with flat blades (radial flow), contour providing stability and safety should the impeller encounter a sudden shock flow High for improved Blending and Solids Suspension applications blades (axial flow), and canted blades (radial/axial flow). Blades may be load. MA-RG agitators use a mounting skid for robust installation. They design and testing at our mixer facility to allow NOV to create more mixing Possible reduction in the horsepower and size of the gear drive required installed in single or multiple configurations to provide desired results. without consuming a lot of power due to low shear and velocities. These to achieve the desired mixing result Multiple sizes and locations of impeller configurations are available. These being the size and mounting configuration. Multiple sizes and locations of agitators are sized to meet all drilling rigs needs and have a large and impeller configurations are available. MA-RG agitators are sized to meet all and are being installed globally today along with BRANDT solids control Mechanical Design successful install base worldwide. drilling rigs needs and have a large and successful install base worldwide. equipment. Decreases impeller weight by nearly 40% over other high impellers in-tank Longer can be used without the need for steady bearings Specifications Specifications Specifications Upgrade Opportunity Dimensions 22 in x 22 in x 39 in Dimensions 67.25 in x 33.25 in x 25.5 in Dimensions 30 in x 22 in X 44 in impeller The weight is similar or less than older, less impeller (559 mm x 559 mm x 991 mm) (1705 mm x 859 mm x 648 mm) (788 mm x 559 mm x 1118 mm) designs Weight Weight Weight superior The performance of the XE-3 High Impeller can almost double a canted impeller pumping rate at an equivalent torque Gearbox Helical Gearbox Helical-Bevel Gearbox Helical-Bevel level Nominal Gearbox Ratio 28.85:1 Nominal Gearbox Ratio 29.29:1 Nominal Gearbox Ratio 36.8:1 (can vary) Maximum Torque 17,912 in-lb (2023.78 Nm) Maximum Torque 75,225 in-lb (8,499.28 Nm) Maximum Torque 31,200 in-lb 3 in (76.2 mm) 3.5 in (88.9 mm) 3-4.5 in (76-114 mm) Various

4310 N Sam Houston Pkwy East Phone: 713 482 0500 2015 National Oilwell Varco All Rights Reserved - RigDoc 95723592 Houston, Texas 77032 Fax: 713 482 0699 United States brandt@nov.com nov.com

Introducing a new range of Liquid Agitators Mixers. Australian made and fabricated from the highest quality of materials. Agitators are reliable and durable in service. Features Motors Gears Are of the highest standards and meet energy efficient standards. Available in 3 phase or single phase in all models. Nose Cone Integrated shaft support bearing lip seal. Supports the shaft loads and provides excellent sealing against oil contamination. Shaft connection is quick and reliable. Clamp Mountings Heat treated Aluminium construction for light weight, high strength and corrosion resista....