<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

Our agitators feature the new dracomet coated corrosion resistant keyless coupling for easy installation and impeller adjustment. The units come complete with base plate, motor, gearbox, impeller, shaft & couplings.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

Derrick mud agitators include an explosion-proof, “C” faced motor, reduction gearbox (helical-bevel gears for horizontal agitators or all helical gears for vertical units), impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

Attaching the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Derrick agitators to do the same work at far less horsepower. By unitizing the motor and gearbox, weight and space requirements are reduced. Horsepower, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights. Available horsepower ratings* are: 5, 7.5, 10, 15, 20, 25, and 30.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

Mud agitatoris part of the drilling fluids solids control equipment, which is mainly used to agitate and mix the drilling mud to prevent solid particles from settling in circulating tank. It is composed of explosion proof motor, speed reducer,motorbaseandblade.The motor and speed reducer, speedreducer andimpeller shaft are connected by steel coupling. The impeller is welded with four blades.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

Drilling mud agitator is a device mounted on mud tank for agitating the drilling mud to prevent the drilled cuttings and fine solids from sedimentation. Finemade offers a variety of motor and impeller sizes to fit specific tank configurations. Nearly every large compartment of mud mixing and storage tank should be equipped with mud agitators to maintain the proper properties of drilling mud that will pump back to the borehole.The oilfield mud tank agitator is configured with an explosion-proof motor, reduction gearbox, impeller, and shaft with assembly bushings. Canted blade impeller are commonly used.

Landa mud agitators include an explosion-proof, “C” faced motor, reduction gearbox, impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

The skid mounted MA-RG agitator is compact, and its low profile reduces headroom requirements and provides more layout space on top of the tanks. The gearbox is a triple-reduction helical-bevel gear drive system that reduces the rotational speed of the motor to drive the impeller(s). Up to 95% mechanical efficiency helps reduce horsepower requirements.

Impellers are available with flat blades (radial flow), contour blades (axial flow), and canted blades (radial/axial flow). The impellers are sized according to tank volume and expected duty. Active mud system compartments—such as solids removal sections, mud mixing sections, and slug pits, which need a higher shear force to produce immediate mixing—are another consideration in impeller sizing.

Several types of shafts are offered. Mild steel shafts are cut to length and joined to the gearbox output shaft with a rigid coupling. Solid shafts are keyed at the bottom for impeller height adjustment. Hollow pipe shafts are available for deep tanks. They are supplied in flanged sections and bolted together, making them ideal for limited lifting height.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

As Mud Agitator Manufacturer, Brightway can supply BWJBQ 5.5-22kw Mud Agitator for mud tank and mud system. including: Horizontal Mud Agitator or Vertical Mud Agitator. Brightway mud agitator can be customized once we get the detailed requirements. Buying mud agitator from Brightway will be your best choice for drilling mud circulation system.

1. Brightway mud agitator equips with a motor couple to a rugged oilfield gearbox, which can eliminates troublesome couplings, misalignment and have a longer bearing life. And it is driven by the explosion-proof motor, coupled to a gearbox which will drive the impeller shaft. Due to the simplex turbine structure of shaft,

2. Brightway mud agitator is featured by compact construction, light weight, balanced transmission, small footprint, low noise and high efficiency. And its impeller turbines can transform the mechanical power into drilling fluid agitation as well as circulation.

3. Brightway mud agitator can be designed per customer’s requirement to choose the helical-bevel design or worm design for reduction gearbox. Its motor can be horizontal or vertical. As for the shaft and impeller, compared with painting process, the galvanizing treatment is usually adopted to create a better anti-rust performance.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

The transmission structure of drilling mud agitator is mainly composed of driven motor, reducer gearbox, connecting device and mixing shaft assembly. There are not many forms of drilling fluid agitators commonly used in drilling fluids solid control systems. Among them, there are worm gear direct transmission and worm gear coupling transmission.

Mud agitator is used at trip tank, pill tank, desilter tank, mud suction tank, mud reserve tank, mud mixing tank. It is also used under the decanter centrifuge to avoid the mud settle down.

Mud agitators are normally used together with mud guns. Normally a mud agitator with a mud gun. The mud gun is used to support the 4 corners of mud tanks. GN Solids Control mud guns have 3 nozzles. Each nozzle]of GN mud gun can cover 120 degree, the 3 nozzles can cover totally 360 degree of the mud gun. The mud agitator is driven by electric motor. While the mud gun is driven by centrifugal pumps which are used for mixing or mud discharge.

Some manufacturers have also used worm gear and worm coupling drive. Worm gear drive is widely used indrilling fluid agitator due to its simple structure, large speed ratio and high reliability. Early drilling fluid agitators were almost all directly driven by worm gear. Although the worm gear coupling drive and belt drive are large in size, they have the characteristics of soft motion, which is good for protecting the overload of the motor. Therefore, some manufacturers will choose them.

The most commonly used agitator transmission mode is the gearbox reducer. The advantages of gear reducer agitator are high transmission efficiency and less maintenance. The disadvantage is large volume. Gear driven agitators are also divided into direct drive and coupling drive. The direct drive mud agitator is the most commonly used agitator drive form at present because of its simple structure and convenient maintenance.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

A Mud Agitator is used in surface mud systems to suspend solids and maintain homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion-proof motor, coupled to a gear box that drives the impeller shaft. The impellers (turbines) transform mechanical power into fluid circulation or agitation of drilling fluid mud agitator. The objective is to obtain a uniform suspension of all solids.

Descriptions of Mud Agitator1. Mud agitator is an equipment to mix solid and fluid, mainly used in oil and gas drilling mud process, mineral working site, etc. mud system.

2. This type agitator holding simple structure, large bearing strength, low noise, more durable. It prevent solid sediment and maintain drilling fluid property. Features 1.Typical C face motor installation 2.Small footprint without skid

3.Helical-Bevel gearbox 4.Motor can be horizontal or vertical Benefits 1.Longer usable life on motor and gear box 2.Require less space also easy to handle 3.High efficiency, low noise, low operating temperature

Mud Agitator, Drilling Solids Control,Mud Cleaning Agitator, mud agitator manufacturer Exporters, mud agitator manufacturer Suppliers, mud agitator manufacturer wholesalers, mud agitator manufacturer distributors, mud agitator manufacturer Manufacturers, mud agitator manufacturer sellers, mud agitator manufacturer

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

Mud agitators are designed to mix and suspend the solids throughout the mud solids control system. Unlike mud guns, the mud agitator is relatively a low energy device, easy to operate and inexpensive to maintain. AIPU solids control mud agitators including the horizontal and vertical type according to motor mounting direction.

The motor, it must be explosion-proof firstly. We know it’s the power source for mud agitator. Our company adopts the top brand of electrical motor to make sure its performance. While the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Motors range from 5.5 to 15KW and may be supplied in several power configurations.

Aipu manufacture mud agitator with worm and wheel gearbox, also the agitator with helical bevel gearbox. Helical bevel geared agitator will transfer more efficient to shaft save more energy than the common worm and wheel gearbox. No matter for the horizontal or vertical agitator, there is helical bevel gearbox available. The high performance, efficiency, and quality are appreciated much among clients.

Impeller we use high-quality stainless steel S.S.316. AIPU have single impeller and dual impeller for the option. It is selected depends on the tank depth. Usually, the mud tankdepth less than 1.6 meters, we configure the single impeller. While the tank depth more than 1.6 meters, we configure the dual impeller. Impeller size AIPU supply are 800mm, 850mm, and 950mm.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

Lake series mud agitator is part of the drilling fluids solids control equipment, which is mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids.

Drilling Mud Agitator for Solid Control SystemLake Petro has been focusing on the oil and gas equipment supply more than 9 years. We always consider to support the customer economic cost, stable quality and comforable service.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

MA series mud agitatoris part of the drilling fluids solids control equipment, which is mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

There are different models APMA3, APMA7.5, APMA11, APMA15, PMA18,PMA22,etcetera. Presently, the helical bevel geared ones are usually APMA7.5. While the APMA15 is geared with a helical worm reducer. For mud agitators, we produce gearbox driven by 5.5kw, 7.5kw, 11kw, 15kw, 18.5kw, 22kw, and 30kw motors.

And the agitators can be the horizontal type or the vertical type. According to users’ preferences, we’ll provide different customization services. The impellers can be a single layer or double layer. The blades are the canted type for better agitation performance.

Drilling mud agitators are popular auxiliary equipment used in drilling mud systems. In oilfields, mud tanks are the platform for a whole solids control system. On tanks, there are shakers, mud cleaner, centrifuge, pumps, agitators, and so on

Mud tanks are used to reserve drilling fluids. During whole well drilling, we need drilling mud and we maintain and process drilling mud for better property and to save drilling costs. Mud agitators will help us to mix or agitate the drilling fluids. Under the impellers’ rotation, the useful solids will suspend without sediment

We know the agitator is consisting of a motor and reducer. Combining them together will get a proper turn speed. Under proper TOR the drilling fluids will be at a high property for better circulation throughout the mud system

A horizontal worm gear type agitator is the most popular agitator used in oil and gas mud tanks because it’s cost-effective. There are coupler options for agitator to protect gear or options without a coupler for saving cost.

A horizontal bevel gear type agitator is a very good option for larger torque and minimum footprint. The bevel gear is much higher in torque compared to the worm gear. Better performance, higher cost.

AIPU supplies mud agitator for the above options as per the buyer’s request and cost budget. Other than the agitator, AIPU supplies a series of equipment for mud tanks or a whole tank with all tank attachments.

Sharpe Mixers gear drives portable mixers are the best choice for volumes up to 3000 USG with higher solids concentrations. The slower speed provides the higher torque that is necessary to mix the higher apparent viscosity associated with drilling mud. Large diameter Hyflo 218 impellers produce much more flow per horsepower than other impellers on the market.

<a href='https://www.ruidapetroleum.com/product/category/Mud-Agitator'>mud agitator</a> gearbox brands

Drilling mud agitator is a device mounted on mud tank for agitating the drilling mud to prevent the drilled cuttings and fine solids from sedimentation. Nearly every large compartment of mud mixing and storage tank should be equipped with mud agitators to maintain the proper properties  of drilling mud that will pump back to the borehole.

The oilfield mud tank agitator is configured with an explosion-proof motor, reduction gearbox, impeller, and shaft with assembly bushings. Canted blade impeller are commonly used.  Horsepower, mechanical configuration, impeller diameter, number of impeller and shaft length are customized to tank dimensions and maximum mud weights. Here is a list of our recommended configuration.