psi mud agitator for sale

Derrick mud agitators include an explosion-proof, “C” faced motor, reduction gearbox (helical-bevel gears for horizontal agitators or all helical gears for vertical units), impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

Attaching the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Derrick agitators to do the same work at far less horsepower. By unitizing the motor and gearbox, weight and space requirements are reduced. Horsepower, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights. Available horsepower ratings* are: 5, 7.5, 10, 15, 20, 25, and 30.

Drilling mud agitator usually mounted in the middle of the tank compartment to agitating mud and prevent it from settle down. But at corners of mud tank, agitator impeller cannot effect. In this case mud gun used.

Drilling fluids mud gun is mounted at the corner of tank. It has high pressure and low pressure for option. Some for international customer, sometime we will prefer 5000psi high pressure mud gun. It request a high standard of the seamless steel pipe feeding for the mud gun.

Drilling fluids mud gun can be powered by centrifuge pump, mostly mixing pump, it is called low pressure mud gun. Dud gun in rig system can also be powered by mud gun with high pressure. Mostly, only high pressure or low pressure will be used in one system, but in some mud system, customer will prefer both high pressure and lower pressure.

The number of mud gun depends on the size of tank. Usually mud gun installed with mud line of mud tank. According the inlet pipe size, there are 2’ mud gun and 3’ mud gun for option. According to different structure feature, there are two types of mud gun: fixed mud gun , and rotary mud gun.

The mud gun in themud system can also be used for transfer mud from compartment to compartment, like for trip tank compartment.GN Mud Guns are available for rotation adjustment to allow the operator to optimize the mud guns performance. The replaceable wear resistant jet nozzle is used, which is special design with better shearing.

1 Each SKYTOP BREWSTER Model B-1300T 1300HP, Blower Motors 10HP, Supercharger Pump, Liner Cooling Pump, Lube Oil Gear Pump, HYDRIL Pulsation Dampener 20 gal 5000 psi, S/N: B137802

1 Each SKYTOP BREWSTER Model B-1300T 1300HP, Blower Motors 10HP, Supercharger Pump, Liner Cooling Pump, Lube Oil Gear Pump, HYDRIL Pulsation Dampener 20 gal 5000 psi, S/N: B13-7801

Suction Tank: Mud Cleaner Tank 186bbls, Suction-1 425bbls, Suction-2 211bbls, Suction-3 220bbls, Slug Pit Equipped with: Agitator 10 HP, Agitator 5 HP, Pit Level Sensors, Desilter Pump

Reserve Tank No. 2: Reserve A= 265bbls, Reserve B= 270bbls, Equipped with: Agitator 10HP, 5 X 6 MISSION 75 HP Centrifugal Pump, TRI-FLO Hopper Skid 6 X 8 MISSION 100 HP Centrifugal Pump

Choke Line Valves (N) 10,000 psi, Kill Line Valves: (N) 10,000 psi, Accumulator Unit and Control (N), Choke Manifold (N)10,000, Mud Gas Separator, Hydraulic Cathead: N), Hydraulic Power Unit: (N), Air Hoists: (N), Derrickman"s Assist Tugger (N) at Racking Board (N), Lift Assist Assembly, including Geronimo Seat and escape slide (N), Standpipe: (N) 7500 psi, Standpipe Manifold: (N) 7500 psi, BOP Handling System: (N), 50 Ton Capacity BOP Rails and Trolley and Hoist (N), Headache Rack for Mast (N)

(3) National 400 JWS Triplex mud pumpw (4-1/2 and 5-1/2" Liners), p/b Detroit Series 60 diesel engine, 600 bbl capacity mud tanks with guns, agitators, hopper, Brandt King Cobra linear motion shale shaker, (2) 6x8 centrifugal mixing pumps p/b (2) 60 hp electric motors, 70 bbl mixing tank, 5000# 2" choke manifolds with 2 adjustable chokes

(2) Continental Emsco FB1600 triplex mud pumps rated at 1,600 HP (2000 input HP) Fully enclosed steel power end. New National Oilwell fluid ends FB 1600 5000 PSI.

Tanks: 8 ballast tank 13,399 bbls, potable water 1,150 bbls, fuel oil 1,525 bbls, pollution tank 96bbl, liquid mud 1,553 bbl, process tank 130 bbl, bulk tanks 1,300 cu.ft. drill water 4,892 bbl.

Gardner Denver PAH triplex pump (4-1/2 “ liners), p/b GM 8V71 diesel engine, 180 bbl mud tank, 180 bbl holding tank, centrifugal pump p/b Detrot 471 diesel engine with hopper (skidded)

GARDNER DENVER 1500E JACKUP RIG(REF#1288M) 1500 HP rig, manufactured 1978, drilling depth 15,000, National Oilwell Varco 350/500 top drive, model JU-45-MS (upgraded), Gardner Denver 1500E drawworks, 80" water depth capacity, 142" x 30" x 3" Lee C Moore Cantiliever mast 1,300,000#, (2) Gardner Denver PZ-10 Triplex mud pump powered by (2) EMD D-79 MB DC traction motors, 37.5" Oilwell rotary table, two speed transmission, powered by one EMD D-79 MB DC traction motor. Currently stacked in Louisiana. PRICE: $4,500,000

JACK UP DRILLING/CORING RIG(Ref#9587)  operates in 80" of water, composed of (6) 10" x 40" x 7"H FlexiFloats and (4) 10" x 20" x 7" H Flexifloats, (4) spuds, (4) 80" legs 3" dia x 40" long.  Currently on the platform is a Gardner Denver mud rig used for drilling and core samples.  Another type of rig such as a Mobile, Acker or CME could be placed on jack up.  Currently working.  Offered on rental basis:   $40,000 per month.   Will sellfor $1,100,000

The VMAI series mud agitators are a vertically mounted motor with ahelical inline gearbox. They are heavy duty mechanical mixers used forviscous fluids such as drilling fluids. The gearbox utilizes a parallel helicalgear drive system that reduces the rotational speed of the motor to drivemounted impeller to maintain a homogeneous mixture of liquids and solidswithin a tank. Impeller are available with flat blades (radial flow), contourblades (axial flow), and canted blades (radial/axial flow). Blades may beinstalled in single or multiple configurations to provide desired results.Multiple sizes and locations of impeller configurations are available. Theseagitators are sized to meet all drilling rigs needs and have a large andsuccessful install base worldwide.

The MA-RG series mud agitators are horizontally mounted motor with ahelical-bevel gearbox. They are heavy duty mechanical mixers used forviscous fluids such as drilling fluids. The gearbox utilizes a helical-bevelgear drive system that reduces the rotational speed of the motor to drivethe impeller(s). MA-RG series agitators are very compact. Their low profilereduces headroom requirements and provides more layout space on top ofthe tanks. The 1:1 height to width ratio results in a lower center of gravity,providing stability and safety should the impeller encounter a sudden shockload. MA-RG agitators use a mounting skid for robust installation. Theybeing the size and mounting configuration. Multiple sizes and locations ofimpeller configurations are available. MA-RG agitators are sized to meet alldrilling rigs needs and have a large and successful install base worldwide.

motor with a helical-bevel gearbox. These agitators are considered highpurpose design for trouble free mixing. The 20BRGT Series are backed byto allow for optimal mixing with lower HP requirements. These agitatorsdesign and testing at our mixer facility to allow NOV to create more mixingwithout consuming a lot of power due to low shear and velocities. Theseand are being installed globally today along with BRANDT solids controlequipment.