heavy duty mud pump factory

Distributor of engineered fluid handling pumps, packaged pumping systems, repairs, parts, & integrated pump control systems. Mud pumps, chiller/condenser pumps, plumbing pumps, boiler feed systems, in-line circulators, condensate systems, sump & sewage pumps, end suction pumps, submersible sump & sewage, non-clogs & grinders, self primers, packaged lift stations, variable speed pump systems, metering pumps, chemical injection systems, chemical mixing systems, peristaltic pumps for chemical feed, high viscous & shear sensitive fluids, self primers, stainless steel, trash pumps, hot oil pumps, vertical turbine pumps, sanitary pumps, marine pumps, industrial pumps, ANSI end suction, vertical cantilever, double suction, non-clogs, progressive cavity pumps, helical gear pumps, well pumps, lab pumps, hose pumps, control valves, check valves, air release valves, tanks, pressure vessels.

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

Continental Emsco Drilling Products, Inc., which consisted of Emsco drilling machinery and Wilson mobile rigs, was purchased by National-Oilwell, Inc on July 7, 1999. To our knowledge, no pumps have been manufactured and sold under the Emsco brand name since National-Oilwell acquired them.

Fairbanks Morse pumps are currently manufactured in Kansas City, Kansas. Fairbanks Morse is a division of Pentair ever since August, 1997 when Pentair purchased the General Signal Pump Group.

Gaso pumps are manufactured by National Oilwell Varco. Gaso was acquired as "Wheatley Gaso" by National-Oilwell in the year 2000. At the time, Wheatley Gaso was owned by Halliburton.

Skytop Brewster pumps are no longer available as new pumps. Skytop Brewster(Cnsld Gold), a unit of Hansen PLC"s Consolidated Gold Fields subsidiary, was acquired while in bankruptcy by National-Oilwell, Inc. in November, 1999.

Our manufacturer Mud Pump skid is suitable for operations in rough, windy, damp and dusty oilfield conditions. Dependent upon customer horsepower requirements the engine sizes will vary.

All equipment is rated for operating at ambient temperatures up to +120 Deg F at 1200 ft altitude. The unit is built on heavy duty oilfield skid with lift frame. The control system is mounted in a stainless steel box on the side of the unit. The digital display provides all important engine and transmission data. Unit is also equipped with emergency kill function.

A wide variety of heavy duty mud pump options are available to you, such as 1 year, 2 years and 3 years.You can also choose from new, used heavy duty mud pump,as well as from energy & mining, construction works , and machinery repair shops heavy duty mud pump,And whether heavy duty mud pump is 1.5 years, {2}, or {3}.

Whether you’re transferring waste oil mixtures, bio waste, sewage, mud or lime slurries, there’s one thing you can be sure of, and that’s that you need a heavy duty, high pressure sludge pump. Capable of efficiently handling viscous fluids containing solids, Castle Pumps’ range of slurry pumps has been built up over the years to provide you with a non-clogging solution to your waste transfer applications. Not all pump designs can do the job, but that’s where we are there to help you. Our technical sales engineers are on hand to help you to select the right solution for your requirements.

Pump Model: 250ZJ-A75 CNSME is a professional supplier of slurry pumps and spare parts originated from China, with over 10 years experience in manufacturing

We consistently carry out our spirit of ""Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for Sludge Pump, Wear Reistant, Mud Pump, Slurry Pump Solution,Desulfurization Pump. Any interest, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future. The product will supply to all over the world, such as Europe, America, Australia,Florida, Greek,Chicago, Chile.We offer OEM services and replacement parts to meet the varying needs of our customers. We offer competitive price for quality products and we will make certain your shipment is handled quickly by our logistics department. We sincerely hope to have the opportunity to meet with you and see how we can help you further your own business.

Type KTHHorizontal Sludge Slurry Pump are cantilevered, horizontal, centrifugal slurry pumps. They are a rubber-lined heavy duty slurry pump designed to accommodate large quantities of abrasive and soft solids with fibrous particles at high flows. They are designed to handle abrasive, high-density slurries in metallurgical, mining, coal, power, building material, other industrial departments, etc. The pumps of this type may also be installed in multistage series.

Typically used in the mining, paper, construction and agriculture industry, units are designed to handle liquids ranging from manure, or waste animal products at high volume to chemical slurries, mud, lime, fly ash, gravel and mineral products. Applications range from transfer to filter press feed and hydro blasting/vapour blasting.

The Horizontal Sludge Slurry Pump is manufactured utilising oversized bearings of heavy-duty design. Bearings can be grease or oil lubricated. Designs are available in various rubbers and metals to accommodate all slurry types and can be directly motor-driven or belt-driven, depending on the application.

The frame plates for type KTH Horizontal Sludge Slurry Pump such as interchangeable, rigid metal or pressure rubber liners the impellers are made of hard metal or pressure moulded rubber liners.

The shaft seals for type KTH Horizontal Sludge Slurry Pump can be packing seal,centrifugal seal or mechanical seal. The branch can be positioned at discharge intervals of 45 degrees by request and oriented to eight positions to suit installations and applications.

The inner volute is rubber lined to reduce the unit"s speed, and the impeller is rubber-coated, ensuring longevity. This slurry pump design has both front and rear adjustment enabling internal clearances to be adjusted as liners wear. Tolerances are adjusted via external bolts without the need to dismantle the volute.

Vortex Impeller: Utilised to transfer large concentrations of sizeable solids at low head. Due to the impeller being of vortex design, there is less area in contact with the fluid and are consequently less efficient. They are necessary for the non-clog pumping of abrasive solid laden fluids.

Expeller Seal & Gland Packed: Sealing system cooled by pumped liquid or external cooling fluid. The expeller seal creates a hydrodynamic seal by creating an area of low pressure around the shaft. Expeller seals improve shaft sleeve lifetime and minimise water use. This combination ensures at low RPMs, and when the pump is stopped, the unit does not leak.

Cartridge Type Single Mechanical Seal: A cartridge type single mechanical seal, with lubrication provided by the pumped fluid or pressurised external fluid according to an API682, Approved Plan.

Cartridge Type Double Mechanical Seal: A cartridge type double mechanical seal, with lubrication provided by the pumped fluid or pressurised external fluid according to an API682, Approved Plan.

Centrifugal Pump. The most common type of slurry pump is the centrifugal pump. These pumps use a rotating impeller to move the slurry, similar to how a water-like liquid moves through a standard centrifugal pump.

A centrifugal slurry pump, in basic terms, is a type of pump. Their design allows them to pump liquid that contains solid particles. Additionally, the concentration, size, shape, and composition of solids in a slurry may affect the design. You can use a centrifugal pump for slurry.

Based on the abrasive nature of slurries, it is essential to choose a pump size that will allow for the pump to run at a slow enough speed to lengthen the duration of the slurry pump"s life. An ideal RPM to run a slurry pump is between 900-1200 RPM. If you have any questions, please feel free to Horizontal Sludge Slurry Pump Factory with 22 years of professional production experience, with the most professional expert consulting team and OEM customization service.

DAE Pumps dredging equipment is ideal for a variety of applications, including dredging dams, ports, marinas, rivers, canals, lakes, ponds, and more. Ensuring water quality and capacity are essential in hydroelectric and water supply dams, making DAE Pumps dredge pumps perfect for removing excess sand and silt. Clearing sediment and contaminates from riverbeds, channels, canals, and oceans help restore safe navigation and shoreline formations, and dredging lakes and ponds clean and remove contaminants and tailing. As ocean currents move sediments, the seafloor slowly rises, lowering the depth of marinas and ports. Dredging ensures safe access for boats and other water vessels.

Centrifugal pumps from DAE Pumps are perfectly suited for demanding process applications. Their heavy-duty construction ensures long-lasting performance in rugged conditions. The DAE Pumps knowledge and experience building top-of-the-line pumps make our centrifugal process pumps ideal in many markets and applications.

The durable DAE Pumps centrifugal pumps provide a proven ability to handle a variety of applications in the water and wastewater industries. These reliable instruments are perfect solutions for pumping chemicals used to treat water, irrigation, fountains, and much more.

For help selecting the most efficient pump for your project, call us at (760) 821-8112 or submit a request. Find the right pump size, volume, speed that you need. Get a FREE custom pump curve to ensure the right pump.

The motor or engine on a pump is as important as the pump itself. It is the driving force that makes the pump go. DAE Pumps offer a variety of motor choices: electric, diesel, and hydraulic.

Frames and skids hold the pump and motor together to make a complete unit. The frame provides stability for the placement of the pump and motor with the intent of a permanent install or seldom movement. The DAE Pumps trailer brings mobility to centrifugal slurry pumps. The whole unit, skid included, is mounted onto a trailer for mobile accessibility. Many industries use centrifugal pumps for performing multiple applications, and they move from one location to another quite frequently. The trailer provides a tremendous advantage of being on wheels.

Centrifugal pumps come in many shapes and sizes. There are two main parts to a centrifugal pump; the pump and the motor/engine. The electric motor or a diesel engine converts the energy it creates into mechanical energy. This mechanical energy drives the pump and moves the water. The centrifugal slurry pumps pull water and other materials in through the inlet and pushes it out through the outlet/discharge.

The electric motor and diesel engine work relatively similarly. A motor consists of a fan and protective casing mounted at the back. Inside the motor is the stator. The stator holds copper coils. Concentric to this is the rotor and shaft. The rotor rotates, and as it spins, so does the pump shaft. The shaft runs the entire length of the motor and into the pump where it connects to the pump’s impeller.

There are a couple of variations to a centrifugal pump. Some models of centrifugal pumps have a separate shaft for the pump and the motor. The connection between the separated shafts is called the coupling. These coupled pumps will contain a bearing house with bearings. The pump shaft then continues into the pump casing. As it enters the casing it passes through a gland, packing, and the stuffing box, which combined to form a seal. The shaft then connects to the impeller. The impeller imparts centrifugal force onto the fluid that makes it to move liquids through a pipe or hose. The impeller is in the pump casing. The casing contains and directs the flow of water as the impeller pulls it in through the suction inlet and pushes it out through the discharge outlet.

At the pump casing, there is a channel for water to flow along, which is called the volute. The volute spirals around the perimeter of the pump casing to the outlet. This channel increases in diameter as it makes its way to the outlet. The shaft passes through the seals and into the pump casing, where it connects to the impeller.

Liquid engulfs the impeller, and when it rotates, the fluid within the impeller also spins and is forced outward to the volute. As the fluid moves outwards, off of the impeller, it creates a region of low pressure that pulls more water in through the suction inlet.  The fluids enter the eye of the impeller and are trapped there between the blades. As the impeller rotates, it imparts kinetic energy or velocity onto the liquid. By the time the liquid reaches the edge of the impeller, it is moving at a very high speed. This high-speed liquid flows into the volute where it hits the wall of a pump casing. This impact converts the velocity into potential energy or pressure. More fluid follows behind this developing a flow.

The thickness of the impeller and the rotational speed affects the volume flow rate of the pump and the diameter of the impeller, and the rotational speed increases the pressure it can produce.

Net Positive Suction Pressure or NPSH is associated with pump suction. At the end of this acronym are two other letters NPSHR and NPSHA. The R is the required NPSH. Each pump tests for this value. At DAE Pumps, we provide a pump operation chart with all our specs. The R-value is a warning or danger point. As the fluid enters the pump and flows into the impeller’s eye, it experiences a lot of energy due to the friction, giving a pressure drop. At certain conditions, the fluids flowing through this section can reach a boiling point. Once this happens, cavitation may occur.

The last letter in NPSHA stands for Available. The net positive suction pressure available depends on the installation of the pump and should be calculated. NPSHA takes into consideration things like insulation types, elevation, liquid temperature, liquid boiling point, much more. Available pressure should always be higher than the required value. For example, if the NPSHA is 12 for the pump requiring an NPSHR of 4 then the pump should be okay. However, a pump that required an NPSHR of 15 than the available NPSH is insufficient, and cavitation will occur.

DAE Pumps provides custom pump curves per the information you provide. Including as much information about the project allow us to best match a pump with your needs, so the centrifugal pump you get is ideal for the project.

Cavitation in pumps is the deterioration of the pump’s metal due to the overheating of water. Cavitation destroys the pump’s impeller and casing that lead to replacing parts and the pump altogether.

Water can turn from a liquid state into steam or gas and boils at around 100 degrees Celsius at sea level. However, at a higher elevation, water boils at a lower temperature because of atmospheric pressure. If this pressure is less than the vapor pressure of the liquid that is pumping, then the water can reach a boiling point. When this happens, cavitation occurs.

During cavitation, air particles within the water expand, and as they reach the boiling point, they collapse in on themselves very rapidly. As they collapse, they start to damage the impeller and pump casing. This damage removes small parts of metal from the surface, and if this keeps occurring, then it will eventually destroy the pump. Therefore, you must ensure the Available pressure is higher than the Required pressure of the pump.

DAE Pumps provides a full spectrum of centrifugal slurry pumps and accessories for completing all your tough dredging projects.We provide turnkey solutions with complete centrifugal slurry pump systems that includeslurry hoses, slurry flow meters, power units,and more.Choose from multiple sizes of slurry hoses for the transferring of materials, wireless flow meters for measuring the flow rate in gallons per minute of liquid, and power units for operation.Parts are always in stock and available for immediate shipping to anywhere in the US and the world.

EDDY Pump Corporation is a pump and dredge equipment manufacturer. Engineering along with R&D are done on site also. Since 1984, we continue to innovate and bring our clients the most breakthrough patented technology and service the industry has to offer.

We are a USA-based dredge and pump manufacturer working with the following Industries: US Navy, Oil & Gas, Mining, Wastewater, Paper/Pulp, Fracking, Chemical, Sand & Gravel, Marine Dredging, Heavy Construction and others. Read More..

Tsurumi Manufacturing has long been manufacturing, marketing and selling various pumps and related equipment, with a strong focus on submersible pumps. Introduced here are two series of heavy-duty, high-powered slurry pumps equipped with an agitator suited for the harsh conditions of large construction sites, mines, etc.

The GPN-series offers motor outputs of 5.5 to 22 kW. The impeller, agitator and suction plate are made of high-chromium cast iron to ensure longer use against wear. And, if the impeller and suction plate wear down to the point of diminishing pump performance, the plate can be replaced or its gap from the impeller adjusted, giving users an easy and inexpensive means for ensuring extended use.

The GSD is a new series of heavy-duty, high-powered agitator pumps. Driven by 37 to 75 kW motors, they feature the highest head and volume of Tsurumi"s slurry pumps. The impeller, agitator and mouth ring are made of high-chromium cast iron to ensure longer use against wear. Moreover, performance drops due to wear have been minimized by pairing a closed impeller configuration with Tsurumi"s unique mechanism that continuously adjusts the clearance between the mouth ring and impeller. Furthermore, pumps are equipped with seal pressure relief ports that release pump pressure applied to the mechanical seal, thus enhancing reliability in extended use.

Both of these series come standard with anti-wicking cable entry and inside mechanical seals with silicon carbide faces. Tsurumi prioritizes continuous duty by designing reliable, durable pumps that guarantee stable operation. For more information, contact Tsurumi Manufacturing.

For industrial, mining, milling, power plant, water treatment, sewage, organic waste, or anywhere slurry solids have a tendency to accumulate, agitator pumps are the answer. Since water always flows to the path of least resistance, a pump without mechanical agitation will only pump the water, leaving the solids behind to accumulate around your pump intake, and eventually starving the pump by blocking the intake. Agitator pumps deliver kinetic energy (energy of motion) to slurry solids surrounding the pump intake, re-suspending them into a fluid state. These solids, which would have otherwise buried and starved the pump of liquid, are pulled into the pump and pushed on through the discharge keeping the intake clear and free of slurry accumulation.

Submersible pumps, which are more efficient than jet pumps, contain a hermetically sealed motor and are used for pushing fluid to the surface. We offer submersible pumps for several applications, including mines, manholes, construction sites, sewage and other areas with a high concentration of solids. Our submersible pumps come in several different varieties in order to handle the different conditions you may face in the field:

Dewatering Pumps – Heavy duty abrasion resistant pumps for dewatering: mines, power plant sumps, manholes, and construction sites. Also as water supply pumps (3/4 to 45 hp).

Corrosion Resistant Pumps – For severe corrosion: all 316 stainless-steel recessed impeller pumps. (1 to 10 hp)For moderate corrosion: Rhino Coated aluminum with stainless steel impellers, shafts, and hardware (1.5 to 45 hp).

No matter what pump you’re looking for, Piranha Pumps will deliver on your expectations, however high they may be. When it comes to the best heavy-duty submersible pumps in the business, look no further than Piranha Pumps.

If you’d like to learn more about our submersible pump systems, don’t hesitate to contact us. An experienced Piranha Pumps team member will be happy to answer any questions you have. At Piranha Pumps, you can rest assured knowing that our dredging and pumping machines are powerful, efficient, and reliable.

As a "Woman Owned" business, we have successfully developed our business from small dewatering pumps to large industrial dredges and have dotted the world with our business products. We have a strong market demand on almost every continent and a continuous demand for all of our quality products. It is our mission here at Piranha Pumps to evolve and improve our products and services to accommodate the ever-changing global market and unique needs of our diverse customer base. We aim to lead the market with our competitive pricing and industrially advanced equipment while maintaining growth and customer satisfaction.