mission mud pump brands

A part of National Oilwell Varco, the Mission line of centrifugal pumps are equipped with innovative features to match the demanding nature of routine, corrosive and abrasive applications. Because of the need for a low pressure mud system, Mission 1780 Type W centrifugal pumps were introduced in 1950s to replace duplex pumps. The aim was to apply a high quality centrifugal pump with concentric systems that allowed for abrasive fluids to be mixed and transferred thereby lowering the initial and maintenance costs of drilling. As a result, centrifugal pumps with low pressure mud systems such as Mission 1780 Type W became the industry standard.

As well depths increased, so was the need for heavier mud weights and centrifugal pumps that could withstand greater horsepower load. This led to the launch of Mission Magnum- a centrifugal pump.

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

Our pump engineering experts have the industry knowledge to gladly assist you with any questions, concerns, or inquiries you may have regarding the pumps & pump parts we distribute @ 800.560.7867.

Power Zone is a leading global supplier of new, used and reconditioned pumps for sale. Our inventory of pumps includes multi-stage centrifugal pumps, positive displacement pumps, reciprocating pumps, single stage centrifugal pumps and screw pumps in a variety of design standards including API 610 Centrifugal Pumps, API 674 Reciprocating Pumps and API 676 Rotary Pumps. We have an assortment of pumps that are used in various applications including water treatment, pipelines, frac water supply, salt water disposal and flood control in industries like municipal, manufacturing, oil & gas, mining and agriculture. We supply pumps of all major suppliers such as Sulzer, Flowserve, ITT Goulds, Aurora and National.

A wide variety of mission mud pump options are available to you, such as 1 year, not available and 3 years.You can also choose from new, mission mud pump,as well as from energy & mining, construction works , and machinery repair shops mission mud pump, and whether mission mud pump is 1.5 years, 6 months, or unavailable.

Disclaimer: SUNBO PUMP® is a registered trademark, and doesn"t represent or is not in anyway affiated with Warman®, Metso® Goulds®, Durco®, and Mission® and other brand names, all these brand names re respected of their owners. Any names, models, numbers, symbols or any descriptions are used for reference purpose only, and do not imply that any part or pump listed is the product of Warman®, Metso® Goulds®, Durco®, and Mission®. SUNBO PUMP® slurry pump and spare parts only interchangeable. This document is the property of SUNBO PUMP, and can be neither reproducted or disclosed to a third party withour a written authorization.

The Mudmaster Cast Iron 2x3x11 - Centrifugal Mud Pump, also known as the Mission Type S Pump 2x3x11 pump, is one of the best-selling oil field pumps on the market. First manufactured in 2010, this pump is strong, durable, easy to use, and incredibly versatile. Furthermore, the fact that this mud pump has a small footprint makes it ideal for use in areas with limited space.

The pump is made from cast iron and weighs 250 pounds. It has a six-vane impeller with an 8.5-inch diameter and offers clockwise and counterclockwise rotation for user convenience. It has a flow rate of up to 800 gallons per minute and head pressures of up to 350 feet. It pressures up to 150 PSI and has a round-bodied gear end. It has a 3500 pump speed limit for oil and a 2400 speed limit for grease.

The Mudmaster Cast Iron 2x3x11 - Centrifugal Mud Pump needs only a small mounting space. It is closely coupled and comes with a 50 or 60 HZ explosion-proof motor. Bearings can run at temperatures of up to 180 degrees Fahrenheit and do not have to be lubricated under normal operating conditions. A sight oil gauge makes it easy to ensure the pump has enough oil to operate properly at all times. As an added benefit, the fluid end is designed to make it easy for users to replace parts as needed in the field, without having to take the pump apart and transport it to another location for repairs.

This pump also has an open impeller design to lower the axial thrust load as well as an impeller retention bolt to protect the pump from damage when run counter-clockwise. The lip seals and exclusion deals are designed to retain lubricants while protecting the pump from contamination when in operation. It has a single-piece casing and is shipped fully assembled and ready to operate.

MudMaster"s centrifugal pumpsare ideal for use in a range of industries, as they can move large quantities of liquid in a short period of time, and can handle liquids that contain solids and/or abrasive chemicals. Oil refineries use these pumps to move crude oil to refining process units, storage tanks, or pipelines. Chemical plants use them to pump corrosive fluids, flammable fluids, viscous fluids, chemicals, and liquids.

The agricultural industry uses centrifugal pumps to power farm equipment and irrigate fields while water treatment plants use them to either move water from one place to another or to circulate water in the plant itself. Paper mills, power plants, mining companies, food processing plants, and the ship-building industry also benefit from all the Mudmaster Cast Iron 2x3x11 - Centrifugal Mud Pump has to offer.

Tobee"s Mission Magnum I Pump 8x6x14 and wet parts are made from Hard Iron or High Chrome alloy materials that they are 100% interchangeable with original Nov Mission Magnum 8x6x14 Pumps and Parts.

The revolutionary design of the MAGNUM I provides supreme-duty performance in all types of fluid pumping operations. Although it offers greater capacity and higher heads, the MAGNUM I remains the competitive pump of choice for aggressive applications.

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

According to the different working conditions, Mission centrifugal pumps can be used as Frac discharge pump, Frac suction pump, Oil drilling centrifugal pump, electric centrifugal transfer pump, Skid mounted mixing pump, Transfer pump, Trash pump, Grinding pump, Circulating mud pump, Centrifugal sludge pump, Drilling fluid centrifugal pump, Horizontal directional drilling pump, Denver pump, Filling pump, Feeding pump, etc

SSA series centrifugal sand pump is designed for continuous operation of heavy slurries that are abrasive, corrosive, or just plain tough to pump. SSA Series Pump are more compact in design, and it can be adaptted for hydraulic motor drive. It is mainly used for oilfield frac trucks as well as blending and pump dealing for water well drilling solid control system applications.

During the 1950’s the Mission” 1780 type “W” pumps were introduced to replace duplex pumps while creating the first low pressure mud system. The use of a high quality concentric type centrifugal pump allowed abrasive fluids to be mixed and transferred while reducing initial and maintenance costs for the drilling industry. The low-pressure mud system with Mission 1 780 Type “W” centrifugal pumps became the industry standard.

As well depths increased so did the need for heavier mud weights. When the mud weight began exceeding 14 ppg the need for a pump that could withstand greater horsepower loads arose. During the 1970’s Mission organized a design team that engineered the Mission Magnum. The Magnum was designed to have the same footprint, flange locations, and drive shaft diameter as the 1780 “W”. This allowed a 1780 to be replaced by a Magnum without any skid modifications. The Magnums were originally engineered with a 2-1/2″ shaft (3″ between the bearings), double row bearings with an engineered life of over 2 years at 200 HP, larger impellers and heavier frames. The Magnum allowed drilling contractors to upgrade their centrifugal pumps and mix heavier fluids.

The National Oilwell Varco” Mission centrifugal pump line has proven to be the best centrifugal design for handling abrasive mud. This pump line offers a broad selection of innovative features for a variety of routine, demanding, abrasive and corrosive applications. These pumps are designed for a wide range of flow rates, from a few gallons per minute to thousands of gallons per minute.

Each pump contains the finest materials, engineering and craftsmanship available in the industry. Described are like features of these pump lines and unique features are described on the following pages.

National Oilwell Varco utilizes unique design features developed for slurries. Three major differences from most pump designs include the concentric casing, wider impellers and increased re-circulation areas. Each feature contributes to reducing wear when handling abrasive fluids.

All of the pumps feature a concentric casing. This casing averages 37% thicker than conventional pump casings, and up to 50% thicker for the larger, mud pumping models. They are pressure rated at 1 .5 times the flange rating and are designed with a 1 /8″ erosion allowance. The concentric style casing has proven to offer the greatest pump life and reduced downtime. The walls of a concentric style casing are an equal distance from the impeller throughout the impeller circumference, which results in a smooth flow pattern. A volute style casing has a cutwater point that disturbs the fluid flow pattern creating an eddy. The concentric casing eliminates vibration, turbulence and aeration that is caused by the cutwater point in conventional volute pumps. It also reduces the high bearing loads and shaft deflection even at near shutoff flows.

The shaft is much larger in diameter than conventional pump shafts for heavy-duty performance, minimum deflection and increased operating life of the seal or packing. With a 2-1/2″ diameter at the seal area and 3″ diameter between the bearings these pumps can be direct connected or belt driven.

The SXP type frac pump is single-stage, single suction centrifugal slurry sand pump, which is used on frac truck mostly. The Mission Magnum XP centrifugal pump is good at handling big capacity of high abrasive, corrosive and plain tough slurries. The Mud pump wet parts are made of high chrome alloy, hardness HRC58-62. The impeller is open type and back vane design decrease the slurry pressure to stnffing box maximally, increasing the pump life. the small footprint design is specially for compact overall dimensions of the S XP minging pump make it an excellent choice for high volume mobile and stationary applications. We have two pump models 14×12×22 and 12×10×23, caacity 3000-75000 gpm (681-1703m3/h), head 75-410 feet (23-125m). Sunbo frac pump can meet the frac track whole equipment system 100%, welcome to contact us.

Magnum XP series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter and mud mixer, to assure these equipments work efficiently.

Tobee® offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.

The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6×5×11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.

Mission Pumps, Blender Pumps, frac discharge pump, frac suction pump, seal-less discharge pump, blender suction pump, blender discharge pump, Mission sandmaster pumps, Mission Pump 14x12x22, Mission Pump Parts, Mission Magnum Frac 12x10x23, Sandmaster 3x2x13, Mission 4x3x13 Pumps, Magnum 6x5x14 Pumps, Mission 8x6x11 Pumps, Mission 8x6x14 Pumps, Oilfield Centrifugal Pumps Drilling Equipment, bare shaft centrifugal pumps, NOV Sandmaster Pumps, China Mission Pumps, 6x5x11 transfer pump, and Mission pump parts