mission mud pump quotation

A wide variety of mission mud pump options are available to you, such as 1 year, not available and 3 years.You can also choose from new, mission mud pump,as well as from energy & mining, construction works , and machinery repair shops mission mud pump, and whether mission mud pump is 1.5 years, 6 months, or unavailable.

A part of National Oilwell Varco, the Mission line of centrifugal pumps are equipped with innovative features to match the demanding nature of routine, corrosive and abrasive applications. Because of the need for a low pressure mud system, Mission 1780 Type W centrifugal pumps were introduced in 1950s to replace duplex pumps. The aim was to apply a high quality centrifugal pump with concentric systems that allowed for abrasive fluids to be mixed and transferred thereby lowering the initial and maintenance costs of drilling. As a result, centrifugal pumps with low pressure mud systems such as Mission 1780 Type W became the industry standard.

As well depths increased, so was the need for heavier mud weights and centrifugal pumps that could withstand greater horsepower load. This led to the launch of Mission Magnum- a centrifugal pump.

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

Our pump engineering experts have the industry knowledge to gladly assist you with any questions, concerns, or inquiries you may have regarding the pumps & pump parts we distribute @ 800.560.7867.

Tobee® Mission Magnum I Pumps are proven as reliable, heavy-duty, low-cost slurry pumps. The 3×2×13 through 8×6×14 pumps all feature the same power end, which ensures production and reduced spare-part inventory requirements. The Mission MAGNUM I has been engineered for the toughest jobs in drilling, production, well-servicing, and industrial applications. The MAGNUM I is more powerful, more durable, and easier to maintain than any conventional pump in use today.

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

Mission centrifugal pumps can be used as Frac discharge pump, Frac suction pump, Oil drilling centrifugal pump, electric centrifugal transfer pump, Skid mounted mixing pump, Transfer pump, Trash pump, Grinding pump, Circulating mud pump, Centrifugal sludge pump, Drilling fluid centrifugal pump, Horizontal directional drilling pump, Denver pump, Filling pump, Feeding pump, Heavy duty oil drilling centrifugal pump, etc

The Mudmaster Cast Iron 2x3x11 - Centrifugal Mud Pump, also known as the Mission Type S Pump 2x3x11 pump, is one of the best-selling oil field pumps on the market. First manufactured in 2010, this pump is strong, durable, easy to use, and incredibly versatile. Furthermore, the fact that this mud pump has a small footprint makes it ideal for use in areas with limited space.

The pump is made from cast iron and weighs 250 pounds. It has a six-vane impeller with an 8.5-inch diameter and offers clockwise and counterclockwise rotation for user convenience. It has a flow rate of up to 800 gallons per minute and head pressures of up to 350 feet. It pressures up to 150 PSI and has a round-bodied gear end. It has a 3500 pump speed limit for oil and a 2400 speed limit for grease.

The Mudmaster Cast Iron 2x3x11 - Centrifugal Mud Pump needs only a small mounting space. It is closely coupled and comes with a 50 or 60 HZ explosion-proof motor. Bearings can run at temperatures of up to 180 degrees Fahrenheit and do not have to be lubricated under normal operating conditions. A sight oil gauge makes it easy to ensure the pump has enough oil to operate properly at all times. As an added benefit, the fluid end is designed to make it easy for users to replace parts as needed in the field, without having to take the pump apart and transport it to another location for repairs.

This pump also has an open impeller design to lower the axial thrust load as well as an impeller retention bolt to protect the pump from damage when run counter-clockwise. The lip seals and exclusion deals are designed to retain lubricants while protecting the pump from contamination when in operation. It has a single-piece casing and is shipped fully assembled and ready to operate.

MudMaster"s centrifugal pumpsare ideal for use in a range of industries, as they can move large quantities of liquid in a short period of time, and can handle liquids that contain solids and/or abrasive chemicals. Oil refineries use these pumps to move crude oil to refining process units, storage tanks, or pipelines. Chemical plants use them to pump corrosive fluids, flammable fluids, viscous fluids, chemicals, and liquids.

The agricultural industry uses centrifugal pumps to power farm equipment and irrigate fields while water treatment plants use them to either move water from one place to another or to circulate water in the plant itself. Paper mills, power plants, mining companies, food processing plants, and the ship-building industry also benefit from all the Mudmaster Cast Iron 2x3x11 - Centrifugal Mud Pump has to offer.

v We have a wide range of centrifugal pumps for oil & gas industries. These pumps are designed for a wide range of flow rates from few gallons to hundred of gallon per minute. Our centrifugal pumps are used in various industrial applications.

v Our energy series pumps are designed for drilling, production, well servicing and industrial application. These pumps are designed for all types of fluid pumping application.

ü Casing of Energy 250 pumps are made up of WCB which makes casing stronger and thicker. (it can perform better with corrosion & wear)pumps are designed of concentric casing so it can reduce abrasive wear and improve life of pump.

ü Our spare parts of pumps are interchangeable with most of the international brand including MCM, NOV, MISSION, MALTCO, HARRISBURG which helps customer to source spare parts easily.

The internal gear pump has proven itself a successful pump in many different applications. Whether it be oil and gas, food, paint and adhesives or on the farm, there is a size for your specific application. The IGP is a simple design reducing maintenance time and increasing the mean time between failure. As always, you can expect the highest quality pumps and parts.

*Pump companies, pump models and seal models are listed for reference only. SAF Seals and SAF Precision Manufacturing Ltd. are NOT affiliated with any pump manufacturers.

Blender pump 14x12-22 frac discharge pump frac discharge pump 12x10x23 frac suction pump frac suction pump 14x12-22 Mission pump for frac truck seal-less discharge pump 12x12 bl...

The Magnum has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The Magnum is available in Magnachrome™, hard iron, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).

Tobee® offers a complete line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b. Bare pumps, matching motors are available from 7.5KW to 90KW, with rotation 800, 1000, 1150,1450, 1750 to 3500 RPM at 50Hz or 60Hz.

The model 10x8x14 and 8x6x14 centrifugal magnum pump used on solid control system over 3000 meter-long drilling rigs, with big viscosity and heavy specific gravity drilling fluid. 8x6x11 centrifugal mud solid control feeding pump applies to under 3000 meter-long drilling rigs, and it also can be used to supply mud to triplex mud pump as a filling pump. 6×5×11 centrifugal pump applies to truck-mounted drilling rigs or pocket drilling rigs. 4x3x13 drilling centrifugal pump is usually used as measuring pump or replenishment pump. 3x2x13 model pump is usually used as clean water pump.