mud pump pop off valve price

Over-pressurization is a looming factor that can cause significant damage to drills and machinery, making quality drilling pop-off valves a must. Drillmax, Inc. specializes in pop-off and relief valves, ensuring that your equipment is adequately protected during the course of your application.

In fact, since 1996, Drillmax, Inc. has specialized in a wide range of quality gate, float, relief and drilling mud valves. We have built strong ties working with a wide range of clients, including:

We our proud of the fact that our drilling pop-off valves are used all across the world in the industry, providing superior performance and longevity for the clients we service. As an aftermarket manufacturer of drilling mud valves and other components, we are able to offer superior service at a lower price point than OEM.

We offer drilling valve 2” aftermarket replacement parts, along with a wide range of other essentials that ensure your machinery and equipment runs efficiently and with minimal downtime. We offer:

A wide variety of pressure relief valve for mud pump options are available to you, You can also choose from new, pressure relief valve for mud pump,as well as from energy & mining, construction works , and machinery repair shops pressure relief valve for mud pump,and whether pressure relief valve for mud pump is 1.5 years, or 3 months.

Relief valve mud pump is also called the centrifugal pump, a compressor, and a compressor. It has a series of pistons, this is done in the form of a centrifugal pump, with a compressor. It is usually used by hydraulic maintenance. The rotating pumps have different cuffs and suction cuffs.

Relief valve mud pumps are specially designed for the rotation of the vehicle. There are many types of relief valve mud pumps, suitable for a rotating purpose, such as electric relief valve mud pumps. In the case of the different, pumps are suitable for a rotating process. They are suitable for rotating, there are various sizes and varieties of the pumps depending on the rotation pattern, but with a lesser water flow. On the other hand, there are various types of relief valve mud pumps that are specially designed for use in rotating processes. If the pump is suitable for a rotary motion, these pumps are suitable for a rotary process, and can be used on both sides of the vehicle. On Alibaba.com, there are various types of relief valve mud pumps, such as electric relief valve mud.

Pressure relief valves are installed on mud pumps in order to prevent an overpressure which could result in a serious damage of the pump and serious or fatal injury to personnel.

The discharge pressure is routed to the closer mud tank, via a 3” XXS line clamped strongly on tank side . Mud is flowing into the mud tank until line bled off, bearing in mind that minimum slope is required to avoid mud settling in pipe ( around 1 inch/meter).

Pressure relief valves are set usually to 90% of the maximum working pressure of the liners in use. Read carefully manufacturer chart for pressure setting versus size of liners.

Discharge pressure losses close to the maximum preset pressure.The Pressure relief valves are usually installed on a upper point of the discharge side of the mud pumps.

The pressure relief valve can be reset, if not damaged during the release of pressure. Special care should be taken if no working platform available to access the PRV.

The relief valve should be set to 50% greater than the normal operating pressure (70 psi for normal operations, but this value may vary depending on the specifics of the job).

It is recommended that the valve be located on the suction manifold of the pump, but may be located elsewhere on the suction line at the customer’s discretion.

The outlet line from the relief valve should gradually slope down to the tank level, and should be supported to prevent any dips or low spots where mud could collect, harden and potentially block flow.

It is recommended that a suction pressure relief valve be used in the suction line to prevent damage to either pump in the event of a high pressure surge occurring in the line.

Shear pin safety valve is used at the discharge part of the mud pump.JA-3 shear pin safety valve changes the discharging pressure by changing the position of the shear pin ,which is operation easy and work reliable.

The patented X8000 SERIES II™ Reset Relief Valve is designed to protect equipment from high pressure spikes and automatically “pop off” to a full open position when the set pressure is reached.

The X8000 Series II™ Reset Relief Valve is easy to adjust, easy to set triggering pressure, and easy to reset. The bonnet, top-loaded piston, and seals can be removed while the body remains in line.

The X8000 Series II™ minimizes downtime and is easily repaired or rebuilt in the field. Our valves are DNV certified to 10,000 PSI. With computer modeling, high technology engineering, metallurgical and mechanical enhancements, RR Valve, Inc. has solved many of the industry’s frustrations with temperamental and unreliable Reset Relief Valves.

Our technical advances have replaced the commodity valve with a proven advanced engineered flow control device. Our valves are competitively priced and relatively maintenance free, resulting in negligible rebuild costs and downtime. At half the weight of the commodity valves, The X8000 Series II™ is safer to install and service, thus reducing the time and labor cost during maintenance.

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

RM2CD8621–Crude oil stack valve, blowout preventer, gas flare, flare stack, pressure relief valve, stack valve, crude oil, valve, crude oil tank valve, valves

RMCYXCDA–A very well detailed model triple expansion vertical reversing condensing marine engine,Built by H.Wall 1970 ¦S.D.S.M.E with brass bound,blued steel clad cylinders 1.5in,1.75in and 2.25in bores x 1.75in stroke,cylinder head lubricators and pressure relief valves,piston HP and slide IP and LP valves with hand wheel operated Stephenson"s link reverse,main stop and sampling valves,oil boxes and fine pipe work,crankshaft with six main bearings and marine type big ends,barring gear and disc flywheel.Further details include rear frame incorporated surface ,Additional-Rights-Clearences-Not Available

RM2CNPY75–. Railway and locomotive engineering : a practical journal of railway motive power and rolling stock . ible) block intercepting valve incompound position by slipping piece ofgas pipe over stem of intercepting valve March, 1904. RAILWAY AND LOCOMOTIVE ENGINEERING and fasten with a nut; leave separateexhaust valve shut. If the valve onhigh pressure side is broken steam willpass to high pressure cylinder thenthrough the receiver to low pressureside. As the pressure relief valves onlow pressure cylinder will only allowabout 45 per cent, boiler pressure tostay in cylinder, regulate opening ofthrott

RMCYXCDJ–A very well detailed model triple expansion vertical reversing condensing marine engine,Built by H.Wall 1970 ¦S.D.S.M.E with brass bound,blued steel clad cylinders 1.5in,1.75in and 2.25in bores x 1.75in stroke,cylinder head lubricators and pressure relief valves,piston HP and slide IP and LP valves with hand wheel operated Stephenson"s link reverse,main stop and sampling valves,oil boxes and fine pipe work,crankshaft with six main bearings and marine type big ends,barring gear and disc flywheel.Further details include rear frame incorporated surface ,Additional-Rights-Clearences-Not Available

RM2AM3J7B–The Locomotive . the safety valves soon began to blow. Thesevalves were said to have been set to relieve the pressure at no lbs.In spite of the relief afiforded by the safety valves, the pressure on theboilers continued to rise, 140 lbs. having been noted shortly beforethe explosion by one of the survivors. A few moments after thisobservation both boilers exploded. The foregoing evidence, togetherwith the violence of the explosion, would seem to indicate over-pressure,resulting from insufficient safety valve capacity, as the cause of theaccident. As all of the mill employees were at work at th

RM2AKNG6F–National boilers, radiators, and specialties: catalog no26 . The Honeywell Vapor Relief is designed andconstructed to be placed on atmospheric vaporheating boilers. This extremely simple and inexpensive devicecontains no valves or mechanical parts of anykind —just three open tubes through whichvapor and water circulate when the relief isoperating. It is made entirely of cast iron intwo parts and will last indefinitely, With the Honeywell Vapor Relief properlyinstalled it is unnecessary to place check valvesin the return mains near the boiler to preventwater from backing out under pressure, ast

RM2AN1YHE–Handbook for heating and ventilating engineers . purpose oftaking up the expansion. It will be noticed that the two-pipe steam systems have sealed returns where they enterthe main return above the water line of the boiler. In some steam systems where atmospheric pressure ismaintained, special valves with graduated control admit steamto the upper part of the radiator. The returns enter into areceiver near the boiler with a vapor and air relief to theatmosphere through some form of condenser, having an out-let pipe leading to an air shaft or to a chimney. The pres-sure upon this return is mainta

RM2AG7YTN–. Mechanical appliances, mechanical movements and novelties of construction; a complete work and a continuation, as a second volume, of the author"s book entitled "Mechanical movements, powers and devices" ... including an explanatory chapter on the leading conceptions of perpetual motion existing during the past three centuries. 160. FRICTION RELIEF IN DVALVES. This novel method of relievingthe friction of slide valves consists in cuttingdiagonal grooves in the outer bearings of theport face of the steam chest, as shown at a, a.This relieves the pressure of the valve andfacilitates lubricatio

RM2AM5NGP–Steam turbines; a practical and theoretical treatise for engineers and students, including a discussion of the gas turbine . g bar running in the bearing housing so as toinsure a concentric bore. Manholes are provided at each endof the cylinder to permit access for interior examination, andauxiliary relief valves are fitted in each of the manhole covers toprevent the pressure in the exhaust passages from rising to adangerous point in case of failure of the condensing apparatusor the sticking of the atmospheric relief valve in the exhaustpiping as otherwise dangerous pressure would result in th

RM2AWEKAF–Handbook for architects and builders . G.M.DAVIS REGULATOR CO. 422 MILWAUKEE AVE., CHICAGO Manufacturers of Steam Heatipg and Power Plant Specialties Pressure Regulators Balanced Valve Back Pressure Valve Float Valve Exhaust J^elief Valves Damper RegulatorSteam Trap Pump Governor Stop and Check Valves Water Relief ValveRadiator JUr Valves Receiver and Pump Governor Vacuum Pump GovernorESTABLISHED 1875 CATALOG ON APPLICATION DAVIS PRESSURE REGULATOR Specifications should read G. M. Davis Valves. OUR WORK IS OUR SUCCESS. The Chas. D. Ranney Co. STEAM AND HOT WATERHEATING Phone Edgevvater 2731513

RM2AFXRHE–. Hot water supply and kitchen boiler connections : a text book on the installation of hot water service in residences and other buildings and methods of connecting range boilers, steam and gas water heaters. Pig. 5 34. Two Types of Relief Valves. and lack of pressure in the supply. From the top of the boilerto the level of the water in the tank, as shown in the illustra-tion, would hardly be over 6 feet. Using the thumb rule ofwater pressure of % pound to each foot in height, a pressureof only 3 pounds would be exerted at the top of the boiler bythe supply. The large water heating surface exp

RM2AKNM49–National boilers, radiators, and specialties: catalog no26 . Nov us Pop Safety ValveLow Pressure List Price, Pop Safety Valves Nov us Water Relief Valve Size, Inches ] 1M 1M 2 m 3 3V2 4 Price, each $6.00 $6.75 $8.2£ $11 75 $26.0C $37.5C $50.0C >$80.00 List Price, Water Relief Valves Size, Inches.. , 1 m m 2 2V2 3 3H 4 Price, each.... $12 00 $15.00 $18.00 $27.00 $43.00 $72.00 $95.00 $120.00 Brass Water Gauges Self-Cleaning 4

RM2AKNKXM–National boilers, radiators, and specialties: catalog no26 . Nov us Pop Safety ValveLow Pressure List Price, Pop Safety Valves Nov us Water Relief Valve Size, Inches ] 1M 1M 2 m 3 3V2 4 Price, each $6.00 $6.75 $8.2£ $11 75 $26.0C $37.5C $50.0C >$80.00 List Price, Water Relief Valves Size, Inches.. , 1 m m 2 2V2 3 3H 4 Price, each.... $12 00 $15.00 $18.00 $27.00 $43.00 $72.00 $95.00 $120.00 Brass Water Gauges Self-Cleaning 4. Size, Y2 Gauge Glass, % x 12List Price 12.60 Size, Y2 Gauge Glass, % x 12List Price $3.00 71 NATIONAL HEATING SPECIALTIES Bronze and Bronzing Liquid

RM2AM46J5–The Locomotive . S. Sre/fM Bo/LEK^ II <& Fig. I. The heater was not equipped with the regulation water relief valvenor had it a pressure gauge, thermometer or temperature regulator.However, there was a relief valve fitted on the inlet pipe leading to thepipe coil in the firebox of the steam boiler. The relief valve was stampedto release at 125 lbs. pressure, while the normal city water pressure was85 lbs. It will be observed that stop valves are fitted in all pipe connec-tions between the boiler and the relief valve. The hot water supply heater was installed during the fall of 1925and, as p

RM2CGWWR6–. American engineer and railroad journal . Section Through Cylinders and Steam Chests.. LLJ LU UJ Combination By-Pass and Relief Valves for High Pressure Cylinders.Four-Cvlinder Tandem Compound Locomotive—Northern Pacific Railwav. September, 1901. AMERICAN ENGINEER AND RAILROAD JOURNAL. 277 J :; • -L—4=— i - I. t> -7 n Sectionot OilCv/>. -v, U^VJ i. H7P • -

RM2CEMJF9–. The story of the exposition; being the official history of the international celebration held at San Francisco in 1915 to commemorate the discovery of the Pacific Ocean and the construction of the Panama Canal. THE 20,000-HOESE-POWEE TURBINE. STORAGE-BATTERY TRUCKS WATER AND ELECTRICITY i79 The important thing about this wheel was that it was equipped with anoil-pressure governor and the latest pattern of water-economizing needlenozzle and relief valves; for two of the serious problems of the hydro-electricengineer were regulation of speed under fluctuating loads, and water econ-omy under th

RM2CH0PKW–. The science of railways . any kind, steam orwater. The spring in the water relief valves onthese engines is made to carry a pressure enoughgreater than the boiler pressure to prevent theirdischarging steam and water ordinarily in start-ing the engine simple. In all other respects the locomotive is the sameas the ordinary single expansion locomotive. Operation of the Baldichi Four-Cylinder Com-pound.—When starting the locomotive, the engi-neer should, ordinarily, pull the cylinder cocklever way back and thus open the cylinder cocksin order to relieve the cylinders of condensation,and, as the

RM2CH10EY–. American engineer and railroad journal . r. The extraction of air and water from each radiatorand coil is controlled by special Webster thermostatic waterand air relief valves, attached to the return end of the unitin place of the ordinary air valves. By the use of the Webster system, exhaust steam is usedto the fullest extent, and when not sufficient is supplementedbj live steam from the boilers under a reduced pressure. Thecirculation is accomplished under a pressure below that of theatmosphere, all air and water being extracted, the formerescaping to the atmosphere and the latter entering

RM2CH5B8D–. Railway age . g so as to Insure a truly con-centric bore. Manholes are provided at eaxh end of the cylinderfor Interior examination, and relief valves are fitted In each of themanhole covers to prevent the pressure In the exhaust passagesrising to a dangerous point in case of failure of the condensingapparatus and sticking of the atmospheric relief valve. A Y-connectlon fitted with two corrugated copper expansionjoints below the base of the turbine connects the separate exhauststo the main exhaust nozzle. An atmospheric exhaust nozzle opensout ot the side of the exhaust Y to permit non-conde

RM2CEJFX9–. A manual of marine engineering: comprising the design, construction, and working of marine machinery. Fig. 94.—Martin and Andrews Valve Relief.. Fig. 94a.—Transverse Section of Martin and Andrews Valve. There are many other plans for preventing slide-valves from pressingunduly on the cylinder face, some by means of springs, and some by pistonsacting perpendicularly to the direction of motion of the valves, but none ofthem are free from objection, nor have any given greater satisfaction thanChurchs (fig. 95) very ingenious arrangement. Through Exhaust Valve.—Fig. 96 shows a low-pressure doubl

RM2CR47TN–. American engineer and railroad journal . ssation of the injection water supply, the exhauststeam from the engine accumulates in the condenser and ex-haust pipe, increasing the pressure and shortly stopping theengine. Also the hot steam passing into the air pump de-stroys the rubber valves and removes the load from the airpump, causing it to race and do serious damage. To preventthis and give the accumulated steam free admission to the at-mosphere, the Knowles automatic exhaust relief valve wasdesigned. The valve proper is practically a cheek valve com-posed of a material unaffected by steam

RM2CEHD31–. Mechanical appliances, mechanical movements and novelties of construction; a complete work and a continuation, as a second volume, of the author"s book entitled "Mechanical movements, powers and devices" ... including an explanatory chapter on the leading conceptions of perpetual motion existing during the past three centuries. 160. FRICTION RELIEF IN DVALVES. This novel method of relievingthe friction of slide valves consists in cuttingdiagonal grooves in the outer bearings of theport face of the steam chest, as shown at a, a.This relieves the pressure of the valve andfacilitates lubricatio

RM2CH6GJR–. Railway mechanical engineer . inders arefitted with the Robinson pressure release valve, the two valvesat each end of the cylinder being combined in a single casting; thai is to say, there are two such castings, each containing two valves which communicate by means of a perforated connecting pipe. These pressure release valves combine thefunctions Of air valves, water relief valves and compression release valves when running without steam. The valve spindle packing, which is exposed to the super-heated steam, is composed of a special bronze instead of theusual lead and antimony white metal.

RM2CRDXTF–. American engineer and railroad journal . s much ingenuity, sincethe whole cage and valve were arranged to lift inside the chest,to give relief in the same manner as the slide valve. It was notuntil several years later that the Brooks Works commencedbuilding bona-fide piston valve engines, which became increas-ingly popular. Those concerns interested in cross-compounds soon adaptedthe piston valve for the high-pressure cylinder, because of the difficulty experienced in balancing the large slide valve neces-sary against the high pressure used. These valves were of theoutside admission type, be

RM2CEHD9J–. Mechanical appliances, mechanical movements and novelties of construction; a complete work and a continuation, as a second volume, of the author"s book entitled "Mechanical movements, powers and devices" ... including an explanatory chapter on the leading conceptions of perpetual motion existing during the past three centuries. 160. FRICTION RELIEF IN DVALVES. This novel method of relievingthe friction of slide valves consists in cuttingdiagonal grooves in the outer bearings of theport face of the steam chest, as shown at a, a.This relieves the pressure of the valve andfacilitates lubricatio

RM2CH39FT–. Locomotive engineering : a practical journal of railway motive power and rolling stock . s. The standard throughout the world. Crosby Pop Safety Valves For all kinds of boilers. Crosby Water Relief Valves For pumps, hydrants, hose, etc. Crosby Improved Steam Gages, And all other pressure and vacuum gages. Crosby Single Bell Chime Whistles For railroads, mills, factories, marine buoys, etc. Crosby Spring-Seat Valves, Globe and angle, for high pressures. Warranted. Crosby Patent Gage Testers. Accurate and altogether reliable. Revolution Counters, Pressure Recorders,Blow-Off Valves. The Crosby

RM2CGWWYX–. The street railway review . owing the companys 2S-kv.set. This set consists of a Sliirtcvant g.xS-in. single, vertical, en-closed automatic engine, direct connected to a Sturtevant 9-100M. P. 8 compound wound generator; the engine operates at 350r. p. m. with go lb. steam pressure at the throttle. The vertical single engines are designed for continuous operation,it high speed. Relief valves of large diameter, adjustable to openautomatically at any desired pressure, are provided at each end ofthe cylinder. The piston is cored out and provided with internalribbing. The guides are cast in one

RM2CGWT62–. Science of railways . Sectional View of a Syracuse Packless High Pressure Valve. This top disc also screws into the bonnet, forming a lock-nut feature that prevents its getting loose. In case of renewals, this top disc can be replaced withpressure on the valve. 580 LOCOMOTIVE APPLIANCES. STEAM CHEST VACUUM VALVES. The purpose of these valves is to permit air toenter the steam chest and thence the locomotivecyhnder when the engine is drifting or running withsteam shut off. These valves are often termed relief valves, butshould more properly be known as vacuum relief. Fig. 4.Steam Chest Vacuum

RM2CGXYHP–. Railway and locomotive engineering : a practical journal of railway motive power and rolling stock . /i ins. at thethreaded ends. The piston valves havecast-iron bodies and L-shaped pack-ing rings, and the drifting valves are ofPennsylvania Railroad style with flatplati over the relief ports. Vacuum re-hef valves are placed in the live 5ti ampassages and a safety valve, set for 225pounds pressure is screwed into each cyl-inder head. The cylinder heads arc ofcast steel, and the steam-chest heads ofcast iron. I he frames, where they are secured to teel. Each link 1i by two longitudinal castbea

RM2CR6TEE–. American engineer and railroad journal . Intercepting Valve for Compound Locomotives.—Great Southern & Western Railway, Ireland, of the high-pressure cylinder; at the same time it closes the com-munication from the high pressure exhaust to the low-pressuresteam chest, and opens a connection for live steam from the steampipe to the low-pressure steam chest. This supply of live steam iswiredrawn so as not to exceed about 75 pounds pressure on the low-pressure side, and low-pressure cylinder and steam chest are, asusual, provided with relief valves, set to blow at 75 pounds in casethe pressure

RM2CGXKWP–. Locomotive text for engineers and firemen; a complete treatise on the engine, electric head-light and standard code of train rules . PLATE 77. Cracked or Broken Steam-Chest. A cracked orbroken steam-chest is usually caused by reversing theengine when running at a high rate of speed, with thethrottle closed. This causes the cylinders to becomeair compressors. High pressure is forced into thesteam-chest, and, having no means of escape, accumu-lates at a higher pressure than the steam-chest is de-signed to withstand. Modern locomotives are pro-vided with steam-chest relief valves for the purpos

RM2CGWR42–. Electric railway journal . exhaust lines are connected. Anatmospheric relief valve is in each linenear the receiver. This is a stand-ard relief valve weighted to open on about 28 lb. persquare inch absolute pressure by means of a hydraulicpiston and standpipe accumulator. The three lines leadinto a tapered header, from which two 30-in. risers,sealed with back pressure valves, extend above theroof. From the header a 42-in. pipe leads to the feed-water heater. This is also protected with a riser andvalve. Between the receiver and the feed-water heater isa thermal or heat-balance valve for equa

RM2CGWW8B–. Locomotive engineering : a practical journal of railway motive power and rolling stock . ater Relief Valves For pumps, hydrants, hose, etc. Crosby Improved Steam Gages, And all other pressure and vacuum gages. Crosby Single Bell Chime Whistles For railroads, mills, factories, marine buoys, etc. Crosby Spring-Seat Valves, Globe and angle, for high pressures. Warranted. Crosby Patent Gage Testers. Accurate and altogether reliable. Revolution Counters, Pressure Recorders,Blow-Off Valves. The Crosby Locomotive Pop Safety Valve. Our claims for merit in a Locomotive Poj> Safety Valve are as fol

RM2CGXM5W–. Railway track and track work . BE* m NO TANKS required with PATENT COUNTER-BALANCED Valve and Water Column Connected direct to High Pressure Mains flFrilKP {t is the only SINGLE CHAMBER VALVEDLUfiU JL that will close with absolutely NO SHOCK. Requires no relief-valve. We also make Gulland 13« Valves HESTON BLOW-OFF VALVES BEST GATE VALVES for all Purposes Best Manufacturing Co. Correspondence Solicited Pittsburg, Pa. WWOOOOOOOOOOOOCKKKX Why Not Use a Gasoline Engine In Your Repair Shops and Save Money ?. We would like to correspond with you in regard to your pumping plants. We make a speci

RM2CF5WM1–. Boston register and business directory. THE ASHTON VALVE CO, i Manufacturers of the Highest Grade I Pop Safety Valves I CO— Water Relief Valves 9 Casting* Pressure and Recording9 Gages „ on ^ , -^teeZ Coil Springs No. 20 Valve ^ * etatiocery Boiler, THE ASHTON VALVE CO. 161 FIRST STREET .. .. CAMBRIDGE C, BOSTON, MASS.. Steam Specialties—Stenographers—Storage—Store Fixtures BOSTON BUSINESS DIRECTORY G. P. ANDERSON & CO. Dealers in Steam Specialties, Engineers and Mill SuppliesVacuum and Vapor Specialties Steam Traps, Return Traps, Damper Regulators, Steam Pressure RegulatorsFeed Water Heater

RM2CGWWKA–. American engineer and railroad journal . LLJ LU UJ Combination By-Pass and Relief Valves for High Pressure Cylinders.Four-Cvlinder Tandem Compound Locomotive—Northern Pacific Railwav. September, 1901. AMERICAN ENGINEER AND RAILROAD JOURNAL. 277 J :; • -L—4=— i - I. t> -7 n Sectionot OilCv/>. -v, U^VJ i. H7P • -. Upper and Lower Guides. boilers have two firedoors and sloping back heads. They aresupported from the mud ring, as indicated in the elevationdrawing. From having followed this development in the drawing roomand the shops it is evident that the greatest care has beenexercised in

RM2CRB3RK–. The street railway review . line. ENGINES. Ihere are three vertical cross-compound condens-ing engines of the .llis-Chalmers Cos. latest type,with high pressure cylinder 28 in. in diameter, lowpressure cylinder 60 in. in diameter, and a commonstroke of 48 in. These engines run at 94 r. p. m.with 160 lb. steam pressure and are each directly con-nected to a i,ooo-kw. General Electric alternatingcurrent generator. Water relief valves are placed ineach cylinder and the steam e.xhaust valves of bothcylinders are operated by separate eccentrics pro-viding for automatic cut-off of from zero to J^

RM2CJ60JD–. Railway and Locomotive Engineering . necan not start the train in this way, open A. Willi cither engine, if tlie speedi.- below three or four miles per hour,proceed the same as when starting aheavy train. Q. In what position would you carrythe reverse lever when drifting? A. At about three-quarters stroke orrrore. Q. What attention should be giventhe power reversing gear? -A. Keep the oil cylinder full of oil,and the piston rod packing on the oil andair cylinders tight. Always sec that thelatches of both reverse levers mesh in the relief valves on low pressure steam chestsand cylinders? A. T

RM2CR782K–. The street railway review . p 300h. p. at 200 r. p. m. The high pressure cylinder is 11 in. in diam-eter, the low pressure 22 in. and the stroke is 2 it. A fly-wheel gov-ernor gives very close speed regulation. To the exhaust pipe arefitted two Blake-Knowles automatic relief valves. The exhauststeam passes into a Worthington condenser, which has water cir-culating around it and is then conducted to the cooling tower. The 168 ^llM%ilvviai%vlcw tower is 12 ft. in diameter and 31 ft. high and filled with vitrifiedfireclay pipes. An air draught is produced by a -ft. fan driven bya lo-h. p. Brot

RM2CGPBT2–. The Street railway journal . Crosby Steam Engine Indicator IS FAMOUS THE WORLD OVER FOR ITSACCURACY. Perfect in Design. Faultless in Workmanship, Branden Pump Valve. Kubber with Wire Coil Insertion.THIS IS THE VALVE YOU WANT. Will outlast several ordinary rubber valves. Sole manufacturers also ofCrosby Pop Safety Valves, Water Relief Valves, WaterGages, Lubricators, Pressure and Vacuum Cages,Feed Water Regulators, Etc., Etc. CROSBY STEAM GAGE & VALVE CO. STOR ES* i93-97 Oliver St., 78 John St., 21-23 W. Lako St., OFFICE and WORKS:BOSTON. NEW YORK. CHICAGO. BOSTON, MASS LONDON, ENGLAND.. ❖ **

RM2CE3KKH–. Hardware merchandising (January-March 1908) . VALVES Air valves Back pressure valves Check Direct weight safety Engine valves in endless variety. We make a valve adapted for almost every service for which a valve is used.Air, Water, etc. Steam, Vacuum, Foot valves Globe and gate valves Hydraulic Index J.M.T. Key valves Lock shield valves Marine valves Needle Oil Peet valves Quick opening valves Relief Sliding Stem Throttle The James Morrison Brass Mfg. Co., Limited Union Jradiator valvesVacuum Water pressure Xtra heavyY gate 93-97 Adelaide St. W.TORONTO 30 HARDWARE AND METAL FENCE WIRE! It m

RMRGAN8E–. Bulletin of the U.S. Department of Agriculture. Agriculture; Agriculture. ^K.COPRER THIMBLE SET IN PIPE Fig. -Expansion joints for high pressure. number have been replaced by relief stands. Some air drums are equipped with an automatic air pump that keeps the chamber filled with the proper proportion of air, but as any such apparatus is liable to get out of order, the air drum may be worthless when needed the most. There are some instances on record where air pumps have de- livered an excess of air which has caused large bubbles of air to col- lect in the main. Relief valves have also been u

RMRHTHHY–. Better fruit. Fruit-culture. Page 24 BETTER FRUIT March. "CROWN" THE NAME THAT STANDS FOR SAFE, SIMPLE, EFFICIENT PRESSURE REGULATION "Crown" Relief Valves and "Crown" Pressure Regulators THE CROWN PRESSURE REGULATOR (shown in cut) designed by the late J. D. Wallace, and ToTuCTioN originally called the "Wallace Pressure Regulator" was practically the "pressure regulator" designed for spraying machines. As indicated, it is placed in the suction line. Pressure acts against the bottom of the plunger which moves upward against reaction of spring,

RMRHTK30–. Better fruit. Fruit-culture. The Alpha Pressure Governor auto- matically controls the pump pressure. It keeps it steady and uniform under all working conditions. No part of the mechanism is exposed to the clogging or corrosive action of the solution. No relief valves or diaphrams are required. No liquid is pumped except it is forced through the nozzles. All unnecessary wear and tear on both engine and pump is eliminated; safety is insured and a saving on fuel is made. The Alpha Engine—The dependability and satisfaction of Alpha Sprayers is further insured by the use of a really high-class, s

RMRHTJWW–. Better fruit. Fruit-culture. IQl6 BETTER FRUIT Page ig. "CROWN" The Name that Stands for Safe, Simple, Efficient Pressure Regulation "Crown" Relief Valves and "Crown" Pressure Regulatiors This cut shows the CROWN RELIEF VALVE, the result of years of study and intimate connection with the whole spraying machine problem. Eliminates the trouble features of the ordinary relief valve. Cannot clog and be held open, allowing the pressure to run down. No ground valve seats to be cut out, necessitating re-gringing. Only an inexpensive rubber cup or gasket to replace. An

RMRHTJPR–. Better fruit. Fruit-culture. The New Myers Automatic Pressure Governor Pump not only eliminates the Relief Valve but prolongs the life of the Pump. Plungers and Valves not in action unless spray is going through nozzles. The Myers Power Sprayer with the Stover Engine for Power is pos- itively the best Spraying Rig possible % / to build. Light Draft and Cutaway Harrows Myers Spray Pumps Mail us the Coupon so we can send you FREE BOOKLET.. PORTLAND or SPOKANE Here is my name for your FREE Sprayer Booklet Name P.O had many years" experience as a fruit broker and fruit dealer, and also in conn

RMRHTPW4–. Better fruit. Fruit-culture. ip 18 BETTER FRUIT Page 15 THE MYERS AUTOMATIC POWER SPRAY OUTFIT With Automatic Pressure Governor VERTICAL CYLINDERS —NO RELIEF VALVES —MACHINE CUT GEARS Automatic Control. Insures Safety. Secures Uniform Pressure and Eliminates Unnecessary Wear. Plunger Guide above Plunger Eliminates all Side Thrust and Reduces Wear. Belt Driven. Brass Fitted Throughout. Forged Steel Crankshaft. All Boxes Babbitted. Improved Oiling System. The Myers Power Spray Pump With patent Automatic Pressure Governor, has all the desirable features found in any Spray Pump, viz., vertical c

RMRHTP29–. Better fruit. Fruit-culture. ipi8 BETTER FRUIT Page 15 THE MYERS AUTOMATIC POWER SPRAY OUTFIT With Automatic Pressure Governor VERTICAL CYLINDERS —NO RELIEF VALVES — MACHINE CUT GEARS Automatic Control. Insures Safety. Secures Uniform Pressure and Eliminates Unnecessary Wear. Plunger Guide above Plunger Eliminates all Side Thrust and Reduces Wear. Belt Driven. Brass Fitted Throughout. Forged Steel Crankshaft. All Boxes Babbitted. Improved Oiling System. The Myers Power Spray Pump With patent Automatic Pressure Governor, has all the desirable features found in any Spray Pump, viz., vertical c

RMRHTKYF–. Better fruit. Fruit-culture. ic)i6 BETTER FRUIT Page 21 GOOD BYE-RELIEF VALVE! 100,150, 200-Gal. Tanks 114, 2 and 2J4-H.P. Engines ^. The New Myers Automatic Pressure Governor Pump not only eliminates the Relief Valve but prolongs the life of the Pump. Plungers and Valves not in"action unless spray is going through nozzles.. The Myers Power Sprayer with the Stover Engine for Power is pos itively the best Spraying Rig possible to build. L Mail us the Coupon so we can send you FREE BOOKLET. Light Draft and Cutaway Harrows Myers Spray Pumps. Please note that these images are extracted from scan

RMRHTJR3–. Better fruit. Fruit-culture. igi6 BETTER FRUIT PagL GOOD BYE-RELIEF VALVE! 100,150, 200-Gal. Tanks 114, 2 and 21/2-H.P. Engines. The New Myers Automatic Pressure Governor Pump not only eliminates the Relief Valve but prolongs the life of the Pump. Plungers and Valves not in action unless spray is going through nozzles. The Myers Power Sprayer with the Stover Engine for Power is pos- itively the best Spraying Rig possible % / to build. Light Draft and Cutaway Harrows Myers Spray Pumps Mail us the Coupon so we can send you FREE BOOKLET.. Please note that these images are extracted from scann

New replacement air compressor pressure safety relief valves. Using the correct one for your application is critical for safety. If you need help picking the right one, please call us for assistance.

500 hp, s/n 298, mounted on oilfield master skid, c/w pulsation dampener, fluid pressure gauge, safety pop-off valve; powered by Caterpillar 3408 diesel engine w/ air diaphragm clutch to belt drive to pump