dewatering mud pump in stock

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

Heavy duty, LB-480-62 made for the contractor & retal stores but used by consumers demanding quality and long life out of a submersible water pump. LB480 is Not a full trash pump but will handle dewatering ditches, puddles, yards etc with small debris that can pass its strainer.

Rugged dewatering pump -Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability. 3720 +GPH. 2/3hp

Tsurumi dewatering pumps are Industrial / commercial duty. Not for fish ponds. Dewatering pump for ponds, pools, basements, job site. Cont. running water level min. 2". LB480

Use optional DualFloat Level Switch or FloodFree Switch. with manual pump or any other pump. See accessories for other level controls and hoses. PumpBiz stocks replacement cords and parts for all Tsurumi Pumps. allegro

Explore a wide variety of mud pumps for dewatering on Alibaba.com and enjoy exquisite deals. The machines help maintain drilling mud circulation throughout the project. There are many models and brands available, each with outstanding value. These mud pumps for dewatering are efficient, durable, and completely waterproof. They are designed to lift water and mud with efficiency without using much energy or taking a lot of space.

The primary advantage of these mud pumps for dewatering is that they can raise water from greater depths. With the fast-changing technology, purchase machines that come with the best technology for optimum results. They should be well adapted to the overall configuration of the installation to perform various operations. Hence, quality products are needed for more efficiency and enjoyment of the machines" full life expectancy.

Alibaba.com offers a wide selection of products with innovative features. The products are designed for a wide range of flow rates that differ by brand. They provide cost-effective options catering to different consumer needs. When choosing the right mud pumps for dewatering for the drilling project, consider factors such as size, shape, and machine cost. More powerful tools are needed when dealing with large projects such as agriculture or irrigation.

Alibaba.com provides a wide range of mud pumps for dewatering to suit different tastes and budgets. The site has a large assortment of products from major suppliers on the market. The products are made of durable materials to avoid corrosion and premature wear during operations. The range of products and brands on the site assures quality and good value for money.

We have attained huge reputation as prominent manufacturer and supplier of Portable Dewatering Submersible Pumps. These pumps are well accepted in the market for their light weight, robust construction and excellent functional accuracy. We design these pumps by utilizing latest tools and techniques as per latest industrial norms with quality tested raw materials. We supply these machines in wide specifications at affordable price range to our customers.

• Portable submersible pumps are one of its kinds. We have a wide range of selection within the same Horse Power rating for these pumps. Our construction is robust compared to other make pumps and has proved its self in the market with its trouble free Operation

• Impeller - We give non-clog impeller which will help Dewatering polluted liquid easily. Different MOC"s are provided to fight abrasive nature of the polluted liquid

• Motor – submersible pumps are available in Single phase and three-phase squirrel cage induction dry motor with ‘F" class insulation and IP 68 protection

• We provide pumps with Aluminum MOC, which will make the pump very light and will be extremely handy for the operator. Trolley mounted construction is also an available option

Uses: Suitable for all general dewatering applications from draining a children’s pool, to removing access water from the basement floor. Built in float switch to operate the pump automatically or manually.

Uses:  Designed to handle the removal of relatively clean jobsite water. Self-priming high performance pump capable of handling solids up to .25 inch (6,5mm)

Motor Type:Gas Honda 5.7 HPMax. Capacity:256 GPM Max. Head:98’ Max. Lift:25’ Max. Solid Size:.25″ Operation Time:2.0 hrs.Weight:69.0 lbs. Uses:Designed to handle the removal of relatively clean jobsite water. Self-priming high performance pump capable of handling solids up to .25 inch (6,5mm)

Mfg:MultiquipStock No.QP2THType:Centrifugal Trash PumpDischarge Size:2″Motor Type: Gas Honda GX160 4.8 HPMax. Capacity:211 GPM Max. Head:98’Max. Lift:25’Max. Solid Size:1”

Operation Time:2.0 hrs. Weight: 97.0 lbs. Uses:Lightest trash pump in the Multiquip fleet. Dual 2-inch discharge ports. Low engine oil shutdown. Easy clean-out cover.

Mfg:Wacker/NeusonStock No.PDT2AType:Diaphragm PumpDischarge Size: 2″Motor Type:Gas Honda 3.5 HPMax. Capacity:50 GPMMax. Head:25’ Max. Lift:25’Max. Solid Size: 1-5/8″Operation Time:2.0 hrs. Weight:131.0 lbs. Uses:Wacker Neuson’s diaphragm trash pumps can move almost anything that flows. Built with high quality components. Designed to handle solids up to 1-5/8 inches (41mm), ideal for dewatering mud slurries and seepage areas.

Uses:The sump pump is placed beneath the basement sub-floor at the lowest point of the drainage system so that all of the water captured in the perimeter drainage pipes flows toward the pump by means of gravity feed.

Operation Time:ContinuousWeight:42 lbsUses:Contractor grade submersible trash pump.   Pumps sand, solids and debris with minimal wear and clogging.   Optional float switch for automatic operation.   Built in miniature thermal motor protector protects against overheating.

Mfg:Tsurumi Stock No.LB-480A-62Type:Submersible Trash PumpDischarge Size:2” Motor Type:110V .2/3 HPMax. Capacity:62.4 GPMMax. Head: 39.5′Max. Solids:.25″Max. Pressure:

Operation Time:ContinuousWeight:22 lbsUses:The LB-480A is  a powerful automatic pump built with  durable  materials in an easy to handle  design.  With  top discharge  capability for  maximum motor cooling. Continuous duty  operation at low  water levels and  extended dry- run capability.

Mfg:MultiquipStock No.ST2010TCULType:Submersible Trash PumpDischarge Size: 2″Motor:115V/6.8A1 HPMax. Capacity:95 GPMMax. Head:45’ Max. Solid Size:1″Operation Time:ContinuousWeight:77.0 lbs. Uses:Compact heavy duty submersible trash pump. Industrial grade cast iron housing and abrasion resistant Cast Iron Impeller. Carrying handle, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller, easy impeller clean-out, and molded 50’ Power Cable with strain relief.

Dewatering PumpsProminent & Leading Authorized Wholesale Dealer from Chennai, we offer dewatering mud pump, 1hp sewage usha pump, dewatering pumpset, usha sewage submersible pumpset, mupump needle vibrator and dewatering pump set.

We feel proud to introduce ourselves as the well-known trader, supplier and wholesaler of Dewatering Mud Pump. The offered dewatering mud pump is commonly used for removing water from the wet soil and mud. Our supplied dewatering mud pump is made from superior grade raw materials, procured from very trusted vendors in the market. The offered dewatering mud pump is very affordable and cost effective in price.

We are one of the widely acclaimed traders, suppliers and wholesalers of USHA Electric Pump Set. The offered electric mono block pump set is commonly used for pumping the industrial liquids and water. Our supplied electric mono block pump set is operated by electric current. The offered electric mono block pump set is very affordable and cost effective in price.

Owing to years of experience in the industry, we offer an extensive range of Monoblock Pump Set that ensures noiseless operations and are technically advanced. This Monoblock Pump Set is highly demanded by our clients all over the nation and is designed by the teams of our professionals and expertise.

TECH SPECIFICATIONS :- These pumps, connected to the tractor by universal joint and mounted on a three point linkage arrangements essy lift by tractor and essy to install Prime Mover required – 27-100 h.p tractor

The Liberty Process Millennium Heavy-Duty Progressive Cavity Pumps are designed for the most difficult positive displacement pumping applications like heavy and abrasive sludges, greases and slurries in sewage and reclamation processes as well as Return Activated Sludge (RAS), Thickened Waste Activated Sludge transfer (TWAS) and sludge dewatering and chopper transfer pumping in wastewater facilities. The Millennium series is well suited for the waste-oil, crude oil, reclamation, and transfer industries.

All Millennium Series parts such as Rotors and Stators or wetted parts such as connecting rods and seals dimensionally interchange as aftermarket replacements with other popular manufacturers pump models like the Moyno® 2000 Series and the Tarby® Century V Series of Progressive Cavity Pumps potentially saving you and your facility thousands of dollars in replacement part costs yearly.

Over 500 wastewater, waste-transfer, and dewatering facilites in North America currently use Millennium parts in their daily service with little to no appreciable loss in performance vs. OEM competitors with a yearly savings averaging 35% over OEM prices for replacement pumps and parts.

The Millennium series starts with a heavy-duty cast iron bearing frame with large bearings to transmit heavy work loads easily and provide long service life. The pumps utilize heavy-duty gear joints that keep the lubricant in and dirt and other foreign contaminants out during operation.

Pump rotors for the Millennium Series are milled from hardened tool steel or corrosion-resistant stainless steel and then coated with hard chrome plating for increased durability and abrasion resistance. Special wear coatings like titanium and other exotic coatings are available upon request.

Pump stators are injection molded rubber which is available in many specialized compounds depending upon your pumping application. We manufacture stators in buna nitrile for general applications and Viton® for additional chemical compatibility at high temperatures. Other rubber compounds such as natural rubber and EPDM are available upon request.

The DAE Pumps Submersible Drainage Pumps support a variety of dewatering applications. Their robust design provides the highest level of performance, reliability, and ease of use. The submersible drainage pumps offer a range of sizes up to 10-inches with over 80 HP and a volume capability of pumping as much as 6100 GPM.

Submersible Sludge Pumps are peak performers in pumping thick mud, clay, and waste. These energy-efficient pumps run at low horsepower, pumping as much as 420 GPM. Available in 3-inch and 4-inch sizes, the heavy-duty DAE Pumps Submersible Sludge Pumps are capable of moving abrasive solids as large as 2-inches. Our Submersible Sludge Pumps provide the support you need for for your toughest jobs.

The DAE Pumps Submersible Slurry Pumps are the toughest and most durable submersible pump. Built for pumping the worst slurry and materials, these pumps have the highest rating in ruggedness. Our Submersible Slurry Pumps are made for dredging the most abrasive media with high solid content in quarries and mining operations. With up to 102 horsepower, these powerful unit are capable of moving 2112 GPM of solids as large as 2.5-inches, and are available in 3-inch, 4-inch, 6-inch, and 8-inch sizes.

The DAE Pumps Payload Electric Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Payload Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

The DAE Pumps Hydraulic Submersible Slurry Pumps are the industry’s best-performing hydraulic submersible pumps. Capable of pumping up to 1325 GPM our hydraulic pumps provide the reliability you need. Because these 3-inch and 4-inch pumps are compact, their lightweight design makes them necessary tools for all site operations. They are non-clogging and are also available in a high head performance of up to 350 feet

The DAE Pumps Hauler Hydraulic Dredge Pump is a highly durable and reliable dredge pump for transporting solids and a variety of other materials. This unit can be deployed from an exvacator or a cable. Our industry-leading top dredge pumps are capable of moving up to 2000 cubic meters of solids per hour. The Hauler Series provides non-clogging suction power to excavate and pump some of the most challenging dredging situations. The suction power handles solids up to 3.9-inches.

DAE Pumps is committed to providing you with the highest quality of pumps at affordable prices. We build our submersible pumps with you in mind. We use the strongest material inside and out to withstand the harshest conditions for getting the job done. Over the years, we built a modular platform of submersible pump that allows us to provide the highest performing pump with the same durability and reliability from one size and power to the next. This means you get the best pump each time.

Our low-cost submersible pump lines are an extension of our commitment to affordably priced pumps. These pumps are built with the same types of metal inside and out as our modular lines, but use a different technology design that brings the performance of these pumps close to those of the other models. We offer these pumps with a lower guarantee so you can get very high-grade pumps at the best prices.

Submersible pumps are the industry’s most durable pumps for underwater operations moving solids and liquids. They can withstanding everyday use of processing water, rocks, sand, mud, sludge, slurry, and other abrasive materials. DAE Pumps provides a variety of submersible pumps for mining, dredging, minerals processing, ash pumping, wastewater, dewatering, and pumping chemicals, oil, sludge, paste, and many other applications. We offer light-duty to heavy-duty submersible drainage pumps, submersible sludge pumps, and submersible slurry pumps.

The submersible drainage pump is built for general dewatering, groundwater, raw water, and construction site use. Construction companies and various municipalities use drainage pumps for removing water from heavily flooded areas and as sump pumps when rainwater or groundwater collects in low-lying and below ground work areas.

DAE Pumps drainage pumps are designed for flexibility and ease of use.  Capable of pumping solids up to .5-inches, the durable design is made to move large amounts of water. DAE Pumps drainage pumps handle clean and dirty water with the best performance and efficiency on the market. Our drainage pumps provide powerful performance with minimal maintenance, and their durable body ensures continued use in harsh environments. We offer a variety of drainage pumps in 3-inch, 4-inch, 6-inch, and 10-inch discharge outlets with a horsepower of over 80 HP, and capable of pumping up to 6100 GPM.

Made to pump thick mud and other similarly viscous mixtures of liquids and solids, submersible sludge pumps are used for moving sludge or light slurry, tank clean-outs, trench and pond cleaning, mining dewatering operations, and various other applications. The sludge pump moves the material that can clog ordinary drainage pumps.

DAE Pumps heavy-duty sludge pumps can move water, but they are made for moving solid material and are built with a high wear resistance inside and out. The high-chrome (55HRC) impellers and base of the pump ensures stability while allowing the passage of large solids. The high-quality components for the mechanical seal guarantees a watertight seal and trouble-free operation. Our submersible sludge pumps move up to 420 GPM and come in multiple sizes and power options. These sturdy sludge pumps provide the reliability you need and the performance you can trust for your dewatering, cleaning, and transferring needs.

The submersible slurry pump is the catch-all of submersibles. Capable of pumping the most abrasive media with high solids content, the slurry pump is the workhorse for quarries and settling pond operations. These ultimate pumps are used for everything from dewatering to dredging.

DAE Pumps non-clogging submersible slurry pumps provide the ultimate in toughness.They have the largest apertures to facilitate the handling of slurry with the most challenging solids and the high-efficiency high chrome agitator can lift settled solids up to 2.5-inches. The robust design uses heavy-duty bearings to withstand shocks and overloads and a double silicon carbide mechanical seal for duty application. Our slurry pumps are available in 3-inch, 4-inch, and 6-inch models, with the ability to move up to 2112 GPM.

Sand is one of the most abrasive materials for any type of pump to manage. The beating of sand on the impeller, volute, and even the hose cause extreme wear and tear on pump components. Thesubmersible sand pump is designed to minimize the effects of blasting sand. However, over a period of extended time, the submersible sand pumps will show signs of wear on these parts from the constant pounding of sand and will require replacement.

Our submersible sand pump wear components are built with a high chromium iron, an extremely strong alloy that is mainly used in mining, milling, earth-handling, and manufacturing industries which require materials with exceptional wear and corrosion resistance. The exceptional wear resistance of high chromium cast iron is due to the high volume fraction of hard chromium carbides. The toughness of the matrix also contributes to the wear resistance and makesit very suitable for pumping sand.

DAE Pumps non-clogging submersible sand pumps provide the ultimate in toughness and sand pumping capabilities. Ourpumps move up to 1664 gallons per minute of material and are available in 3-inch, 4-inch, and 6-inch models.

We sell our commercial and residential pumps via an extensive distributor network. If you’re a contractor, you can purchase our products at well-known national industrial supply outlets like W.W. Grainger, Ferguson, and WinSupply. To find a distribution partner near you, visit our Distributor Search page and fill in your zip code. You can also check out the companies’ websites for additional information.

If you’re new to these systems, you may need assistance setting up and installing one of our pumps, and both contractors and product owners may need timely service on occasion. If you’re looking for a qualified installer for Zoeller pump products or need help with maintenance and repairs, you can find one quickly and easily by visiting our Service Locator page. We’ll direct you to a company that can respond to your needs.

If you ever need to replace worn or damaged pump parts, you can order what you need directly from us. Visit our Service Parts page, select the product and specific components you require, and complete the easy, convenient checkout process.

Feel free to contact us to learn more about our broad pump selection and service offerings. We can also help you find a distributor or service provider near you.

Our line of rentable electric submersible pumps and accessories are designed for a wide range of dewatering applications, across several industries. They provide top performance, great reliability, and the ease of use you need. Dewatering pumps feature a built-in starter and motor protection system along with optional automatic level control. Adjustable wear-resistant rubber diffusers coupled with hardened high-chrome impellers ensure long-lasting performance in the harshest of environments.

Submersible sludge and slurry pumps are built to handle thick, soft, wet mud or other similarly viscous mixtures of liquids and solids, especially the product of an industrial or refining process. Our rentable electric submersible pumps and accessories are designed for an extensive range of dewatering applications, across multiple industries. They provide the performance, reliability, and ease of use you need. Our submersible solids pump lines feature a built-in starter and motor protection system along with optional automatic level control. Adjustable wear-resistant rubber diffusers and hardened high-chrome impellers ensure durability in tough environments.

We Propeller Pumps from 2009 are engaged in Manufacturing Wholesaling Exporting and Retailing the Centrifugal Pumps Axial Flow Pumps Chemical Pumps Sump Pumps PP Pumps Pump Accessories Feed Pump Slurry Pump Turbine Pump Impeller Pump Mixed Flow Pump End Suction Pump Self Priming Centripetal Pump