gorman rupp mud pump free sample

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for medium to high head contractor and bypass applications

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for high head/high flow contractor and bypass applications

Gorman-Rupp 10 Series® pumps are specifically designed for handling solids, corrosive liquids and slurries. They have few moving parts, so maintenance is minimal. If a clog occurs, it can be removed easily through the cover plate opening without disturbing piping or the use of any special tools. The 10 Series offers a variety of metallurgy and seal configurations to choose from to handle a number of different liquids.

Gorman-Rupp Ultra V Series, Super T Series, 10 Series and PA Series trash pumps are all designed for sewage and industrial wastewater handling. Materials of construction are available where corrosives and abrasives are present. SF Series submersible trash pumps are designed for trash handling applications as well. These trash pumps can handle liquids with solids content up to 3" diameter.

AMT is A Subsidiary of The Gorman-Rupp Company and offers over 1000+ different standard model numbers of which 400+ are readily available and offered as QSP, Quick Ship Products.

The AMT line of Diaphragm pumps features a 2-stage, heavy duty forged gear driven transmission. Often referred to as Mud or Sludge Pumps, diaphragm pumps are designed to pump mud, slurry, sewage and thick liquids that have the ability to flow.

This handy, easy to use guide lets you "plug in" your own site conditions and pumping requirements so you can select the best pump for your application, physical conditions and goals. Download it for free by entering your primary email address and name in the form.

The Gorman Rupp pumps are manufactured using efficient machines to ensure that the products have guaranteed quality. The high-quality products are also distributed by selected companies that also offer services and education to the clients on the various products. To find more about the Gorman Rupp Pumps and a distributor to help install and maintain the system, click this link www.envirep.com and contact the agents for help.

The self-priming pumps are designed with the ability to prime even under suction lift conditions. They are placed above the ground hence making it easy for drawing fluid from underground or from tanks. Although they can eliminate trapped air in the suction ram, sometimes they may fail to prime themselves. Some of the reasons that may lead to failure include

1. Leakages in the suction line leading to continuous air drawn into the pump, which does not get discharged since the leaks interfere with the ram pressure.

3. When the pump is air bound due to a pressurized discharge line, excess impeller clearance, or pressurized discharge line, it cannot attain low pressures required hence failure.

5. Under sizing the pump, size makes it lift too high for the system’s speed or the impeller diameter; hence the pumping system cannot create the low pressure required for the pump to self-prime.

Trash pumps are systems that are suitable for handling industrial wastewater and sewage. They are manufactured using materials that are highly resistant to abrasion or corrosion.

Therefore, they can be used in applications where the liquid contains solids up to a maximum diameter of 3 inches. Examples of solids that trash pumps can handle include pebbles, leaves, and twigs. They are used to handle sewage since it allows its passage easily. The system is designed to work by sucking in the dirty water and separating the components into various groups. A

Submersible pumps are made with very light material hence exist in delicate weight designs. They are also capable of self-protecting from extreme thermal conditions. The best temperature for the submersible pumps is either sub-freezing temperatures or warm temperatures.

They can also be applied either totally or partially submerged into the fluid to be transported. These types can be used to handle solids, wastewater, slurries, sludge, waste oil, dewatering, and drilling mud.

The type of materials used to make this type of ram varies depending on the pump’s model. The rotary gear pumps exist in three models, i.e., medium-duty, heavy-duty, and extreme duty, made from cast iron, cast steel, and stainless steel. Other types of Gorman

Rupp pumps cannot reach the level of performance provided by the rotary gear pumps. These pumps are capable of handling any application and any liquid medium. They are versatile, quality, and reliable since they can be employed in countless applications and have patented features.

The fluid is discharged by the gears on remesh hence forcing it out. The rotary pumps can’t handle thin and viscous liquids and can cope with abrasive and high-temperature fluids.

Many industry operators, municipalities, and contractors prefer to use the priming assisted pumps. These pumps are designed to handle tough jobs such as sewage bypass and dewatering large water volumes.

The pumps are best for applications that have long suction lines, large air volumes in the liquid being transported, and intermittent flows. The pump also has patent features that help prevent system leakages, thereby minimizing environmental concerns, enabling them to work optimally under flooded suction conditions.

Gorman Rupp pumps are made with a high-performance advantage. To maintain the pumping system in its optimum performance, preventive maintenance is highly recommended. Some of the factors that affect the performance of the Gorman Rupp pump include pressure, temperature, and abrasive properties of the liquid.

Gorman Rupp manufacturers provide their clients with recommendations and practices they can employ to maintain the performance of the system. The routine helped to ensure that the Gorman Rupp pumps are trouble-free and durable when used for any application in various industries.

One of the essential requirements in preventive maintenance of Gorman Rupp pumps is record keeping. Preventive measures and repair are effective methods of ensuring the system are operating at its peak performance. Problems and issues can be identified by conducting regular scheduled inspections on the various parts of the system.

Gorman Rupp Pumps and their systems offer a variety of products to various clients and markets. There are multiple types of pumps sold and distributed, each of which has varying applications and uses in various industries.

Consult your Gorman-Rupp distributor for detailed information concerning your model. Parts lists can sometimes vary from pump to pump. Your serial number is critical in determining the correct parts and service requirements for your pump. Information on this page is provided for

If you need a sludge pump that can handle heavy-duty applications, look no further than our assortment of high-quality Jack Scaffolding pumps. All of our pumps are self-priming, which means that once the pump casing has been initially filled, the pumps will restart themselves automatically. These pumps are simple to set up and require only a little amount of maintenance on a yearly basis.

Judge the market for heavy-duty pumps around the world can be broken down into distinct submarkets based on the sludge pump type, product type, end-user industry, and geographic location. The market can be broken down into the centrifugal pump market and the positive displacement pump market based on the different types of pumps available. During the time period under research, it is anticipated that the segment comprised of centrifugal pumps will hold the largest share of the global market. The market can be broken down into segments such as crude oil, fuel oil, bitumen, and others on the basis of the product type. During the course of the research period, it is anticipated that the crude oil industry would lead the market for heavy-duty pumps worldwide. The oil and gas sector, the power industry, the processing industry, and other end-user industries make up the different segments of the market. The most significant portion of the market is held by the processing industrial sector. A centrifugal type pump and a positive displacement type pump together make up this sort of pump. Because of its extended service life and low maintenance cost, the centrifugal segment is anticipated to develop at a considerable growth rate over the projected period. This growth is predicted to contribute significantly to the overall market size. In addition, population growth, rapid urbanization and industrialization, and increased oil, gas, and electricity production are expected to drive the growth of the service centrifugal pumps market. These factors all drive water and wastewater management, which in turn drives the growth of the market for service centrifugal pumps. hefty. Heavy-duty centrifugal pumps are used in a variety of industries because of their high efficiency, high resistance to wear, and high flow capacity. Some examples of these types of businesses are power generation, the food and beverage industry, and others.

The application known as Quizlet contains a great number of flashcards pertaining to the sludge pump heavy-duty model. Quizlet is a web-based program for learning languages, and its website allows users to manage their accounts and review previously learned vocabulary. A user account can be created in this program by anyone, anywhere in the globe, and flashcards can be created on any subject under the sun. The sludge pump is a type of industrial pump that is typically used in municipal wastewater treatment applications as well as in mining, construction, agriculture, or industrial applications where heavy waste fluids are processed. Other common applications include mining, construction, and industrial applications. To begin, sludge is a distinct mixture that is typically made up of water as the liquid component and a variety of crushed solids as the solid component. This material is frequently used in a wide variety of industries, including the production of steel, mining, and power generation, amongst others. A strong sludge pump is an absolute necessity due to the fact that sludge acts similarly to a thick and viscous fluid. The experts classify sludge into two distinct groups: those that settle and those that do not settle. When the sludge is allowed to settle, coarse particles are produced. This leads to the creation of an unstable mixture, which in turn necessitates the use of a greater amount of pumping power. In the case of sludge that does not settle, the sludge in question is made up of particles that are relatively small and have low abrasion properties. However, selecting the appropriate pump for this category is also of critical significance.

Whether you handle oily mixes, bio waste, sewage, sludge, or lime slurry, one thing is certain: you"ll need a heavy-duty, high-pressure slurry pump. These sludge pumps are designed to provide a clog-free means of transporting sewage and are capable of handling viscous fluids containing solids. These pumps are used for high-pressure suction and contain a separate motor and inter-bearing impellers that allow for high heads to be achieved. Vertical sludge pumps and floating sludge pumps are the two categories of sludge pumps that can be distinguished by their installation orientations, respectively.

The Amazon website features products from a significant number of heavy-duty pump manufacturers from all around the world. Each of these factories is in the business of producing sludge pumps and selling them in significant quantities. Suctioning sludge, industrial effluent, or sewage using a self-priming sludge pump, which is also known as a sewage pump or thickening pump, is a common application for this type of pump. These pumps are classified as centrifugal pumps and are utilized for pumping fluids that contain solid particles. Their category describes their primary purpose. There is a movable diaphragm present in self-priming pumps; this diaphragm is responsible for the release of air, which is why these pumps are referred to as self-priming pumps. The decanter, which performs the same function as a centrifuge tube, is sometimes referred to as a solid screw centrifuge because it features a horizontal screw that revolves at a slow pace in relation to the bowl. Throughout the course of this procedure, solids are continually extracted and disposed of. As a consequence, this leads to great separation performance in a relatively compact space. Sludge decanters from GEA offer a solution that is both energy- and cost-efficient for industrial and hydraulic engineering. Decanters are devices that can be used to clean and treat sludge in addition to wastewater production procedures with costs that are minimized while achieving the highest possible levels of availability, quality, and efficiency. The cantilever in design, horizontal in orientation, and either lined with natural rubber or hard metal, the heavy-duty slurry pumps in the WA series are centrifugal. It is meant to be used in industries such as metallurgy, mining, coal, electricity, construction materials, and others that deal with high-density abrasive mud.

Made of aluminum and cast iron, this lightweight and efficient submersible sludge pump is durable enough for heavy-duty industrial strength and high performance and harbor freight, yet remains extremely portable with its slim design, ideal for a sewage pump that mixes sludge and water with solids and can run in any vertical, horizontal or upside-down position. The robust design provides a robust pump coupling ideal for harsh conditions while protecting the engine and being ready for use when delivered to the field. Whether you work in mining, tunneling, or construction, this pump is your best insurance against water-related breakdowns. From purchase to service, you can turn to DanPumps for dewatering solutions that work in the real world. Mud Pump Features

The frame plates of the WA series pumps have interchangeable solid metal or pressed rubber bushings. Impellers are made of solid metal or pressure-molded rubber bushings

Under harsh conditions such as sand, mud, stone, and mud, ordinary slurry pumps are prone to blockage, corrosion, and frequent failures. But heavy-duty slurry pumps are highly abrasion and corrosion resistant, meaning the pump will last better than pumps from other manufacturers.

Xtreme Pumps supplies a large number of pumps to the mining industry and heavy duties, both domestically and worldwide, which helps to cut down on consumption and maintenance costs. The impeller of the centrifugal sludge pump is one of the essential components of this type of pump. The selection of the mud pump impeller is extremely important to the performance of the mud pump, and this choice is dependent on the application. Due to the abrasive nature of mud pump impellers, mud applications present an extremely difficult set of challenges. It is imperative that the correct impeller be selected for a mud pump in order for the device to function effectively and endure the test of time.

There are three distinct kinds of impellers that can be found in mud pumps: open, closed, and semi-open. The specific use determines both the benefits and the drawbacks associated with each option. Some are more adept at managing solids, while others are more adept at operating at high efficiencies.

To ensure that the impeller of the slurry pump is resistant to wear, its size must be considered. For less abrasive fluids, slurry pump impellers are typically larger than mud pump impellers. The more "meat" in the impeller, the more effectively it can pump abrasive mud mixtures. Consider the impeller of the mud pump to be the offensive line of a football team. Typically, these players are older and slower. They were repeatedly beaten throughout the entire game, but they deserved it. This mode does not require a small player, just as a mud pump does not require a small pusher.

The K-CP standard dimensional process pump range provides definitive performance and versatility. It features advance designs to increase uptime and reduce life cycle cost for the most demanding industrial applications.

The KTV series are compact, three-phase dewatering pumps. Made from aluminium and synthetic rubber, these are the lightest in Tsurumi’s 3-phase, dewatering pump range.

The KRDX-series is a submersible three-phase heavy-duty explosion-proof slurry pump driven by a 4-pole motor equipped with a high-chromium cast iron agitator that assists the smooth suction of the settled material

The KRS series belongs to Tsurumi"s range of efficient submersible drainage pumps manufactured for general construction work. The pumps are available in 3 different ranges including the:

The KTZ series of submersible drainage pumps is a heavy duty pump suitable for construction work. The cast iron pump body presents a different way of top durability that can not be obtained by the aluminum body pumps. Submersion depth of up to 50m. They are fitted with semi open type impeller (Hi chrome iron)

The LB series from Tsurumi is a single phase, light, compact and easy-to-use pump. It is suitable for a variety of draining applications in different environments ranging from civil engineering, and building sites to dewatering wells.

The LH series from Tsurumi is a reliable designed for superior performance in high-head pump operations. The range offers the LH Series and the LH-W Series.

The Tsurumi NK series, regularly found on construction sites, consists of single phase heavy-duty, high-head pumps that are used for handling abrasive materials.

The SFQ series from Tsurumi is a range of submersible manufactured from heavy duty cast 316 stainless steel pumps that have proven to be an effective solution for the draining of corrosive liquids.

The Tsurumi B series consists of a range of basic basic but reliable sewage pumps. They come with a channel impeller that helps to minimise clogging, winding and other foreign matter-related issues.

The C-series incorporates a cutter mechanism that cuts fibrous materials into small pieces that allow for clog-free pumping. The cutter mechanism consists of a tungsten carbide tipped channel impeller and a saw-tooth suction cover.

Tsurumi submersible grinder pumps have a grinding mechanism in the suction port to grind wastewater and other garbage, rubber goods, plastic bags, fabrics, etc. to small pieces carried by sewage and transfer them under pressure. It eliminates concerns such as clogging small diameter pipes.

The PU series is one of the Tsurumi VANCS-series. Made of stainless steel and FRP resin, the pumps are lightweight and corrosion-resistant. The Vortex impeller suits effluent (glass-fibre reinforced resin) and large passages allow compressible solids in suspension to pass through.

Featuring a vortex impeller recessed in the widely opened pump casing interior, the U series pumps is fitted with the vortex impeller which allows fibrous materials and solid matter to be pumped with minimum contact with the impeller. It ensures choke-free sewage pumping. Available free standing or with guide rail fitting system.

The UT-series from Tsurumi is one of the more economic model of the U-series vortex pumps. It is suitable for a wide variety of applications including transferring wastewater, draining sewage and pumping rainwater that may contain foreign matters.

Featuring a vortex impeller recessed in the widely opened pump casing interior, the UZ series pumps can handle sewage with large solids without clogging or winding.

Submersible single-phase lightweight and compact dewatering pumps with 1" Top discharge, Semi vortex/open type impeller (Urethane rubber), fitted with 0.48kW 240V 50Hz Single phase electric motor.

The RAN ATEX Certified series diaphragm pumps are an Air Operated Double Diaphragm (AODD) that is designed for use in an environment with an explosive atmosphere.

The RAN SC series of diaphragm pump is an Air Operated Double Diaphragm (AODD) pump manufactured from high-quality Stainless Steel. They suitable for a variety of applications in many industries such as water transfer, chemicals, paper/pulp, paints, waste water, ceramics, construction, mining, shipping etc.

RAN High pressure pneumatic pumps offer uniquely efficient operations and are suitable for a variety of uses. The self priming high pressure unit is operated with a single diaphragm pump and has ball & seat check valves.

The RAN PV series of diaphragm pump is an Air Operated Double Diaphragm (AODD) pump manufactured from PVDF material. They can be used to pump hazardous materials, chemicals, slurries and even solids.

The RAN S series of diaphragm pumps is an Air Operated Double Diaphragm (AODD) pump manufactured from high-quality Food Grade Stainless Steel. They are FDA approved.

The Gorman Rupp 80 Series range consists of medium head, mild solids-handling, self-priming centrifugal pumps which are designed for non-stop work loads.

The PAH Series range of pumps from Gorman Rupp are priming-assisted pumps designed and engineered for the most rugged and demanding mining, construction, municipal, agricultural and industrial applications.

The ValuPrime from Gorman Rupp is a dynamic, compact, and powerful pump suitable for application in the dewatering needs of the construction, industrial, and agriculture markets. TheFinal Tier IV Isuzu engine make this pump capable of pumping up to 1,500 gpm.

With a variety of sizes and operating ranges, Gorman-Rupp’s extensive line of Prime Aire® and Prime Aire Plus priming-assisted (dry prime) pumps are hard-working, dependable and ready to tackle the toughest applications including large solids and slurries.

Gorman Rupp PTO Series pumps provide the performance to handle the rates of fuel required by service carriers and suppliers. These pumps are ideal for handling fuel oil, gasoline or other petroleum based products.

Roto-Prime pumps are actually two pumps in one: a variable capacity vane pump used during the priming cycle, and a standard centrifugal pump to move the liquid.

The GHC iron series is HEAVY DUTY rotary gear pump designed for use with any clean liquid compatible with cast iron. This includes booster service, circulating, filtering, lubricating, transferring, low pressure and fluid power.

Gorman Rupp silent pumps include all of the benefits of the self priming product line with all the same cost effective and easy maintenance systems, with the large solids handling abilities.

Gorman-Rupp’s Tankleenor provides quick, efficient and economical cleaning of petroleum storage tanks. The unit is a lightweight, wheel mounted cleaning system designed for one-man operation and is easily moved from job to job.

The GMC series is a MEDIUM DUTY rotary gear pump designed for use with any clean liquid compatible with cast iron. This includes booster service, circulating, filtering, lubricating and transferring.

HSK Series™ Hydraulic-Driven, Positive Displacement Piston Pump. Built to tackle the toughest of applications involving heavy sludges, slurries or other viscous materials

Gorman-Rupp hydraulic submersible pumps are designed for portable use where electrical power is not always available or where there is a requirement for a submersible pump in a hazardous environment.

The Gorman Rupp HS Series can operate fully submerged in many different types of hazardous locations. Variable Speed Control means the pump speed can be varied to suit job requirements, providing maximum efficiency and minimum fuel consumption.

The horizontal multistage pump CM (Centrifugal Modular) from Grundfos engineered for compactness and modularity. These two central features make it suitable for numerous configurations possible.

The compact Grundfos CM Booster ensures optimal water pressure. The booster consists of a Grundfos CME or CM pump and a pressure control unit. The pressure control unit allows the pump to start and stop automatically according to demand.

The Grundfos JP line of self-priming centrifugal jet pumps has been engineered for shallow well, deep well, and convertible shallow well pump applications. They are suitable for pumping clean, non-viscous, non-aggressive, non-explosive liquids, free of solid particles and fibres.

SCALA2 is a fully integrated water booster pump providing perfect water pressure in all taps at all times. The compact unit consists of a pump, motor, tank, sensor, drive and non-return valve.

The Grundfos CR vertical, multistage, centrifugal in-line pump family works for water supply, water treatment and almost any industrial solution – including those for high-pressure, hot, dangerous, flammable and aggressive liquids.

The UPA series from Grundfos is a range of circulator pumps engineered for pressure boosting of domestic water supplied from an external source in residential homes.

Gorman Rupp Packaged Pump Stations are customisable above and below ground lift stations to suit a wide range of applications, the packaged pump stations are a simple process for the end user to simply place in the position, connect the pipe & electrical supplies.

The NS series from Grundfos are a range of centrifugal irrigation and water transfer pumps. They are ideal for pumping clear water and other non-aggressive liquids.

The SPK Series from Grundfos is a range of vertical multistage centrifugal pumps designed to be mounted on top of tanks with the pump stack immerged in the pumped liquid.

The Grundfos DME series of dosing pumps combine a perfect precision with user-friendliness, covering large dosing quantities that range up to 375 l/h @ 10bar and to 940 l/h @ 4bar.

The Grundfos DMH range is a Hydraulic Piston Diaphragm Dosing Pumps series with a durable and robust pump for applications requiring reliable dosing and high-pressure capability, such as process engineering.

The DMX series is a mechanical dosing pump that is versatile offering a wide flow range and a variety of dosing head sizes and materials. Applications include disinfection, coagulation, flocculation and precipitation.

The CR Flex series from Grundfos is an effective pump solution for applications including small-scale irrigation, livestock and fish farming, water supply for remote villages, pressure boosting in the house and swimming pools.

Grundfos"s SQFlex borehole pump is designed for continuous as well as intermittent operation. The SQFlex system is especially suitable for water supply applications in remote locations. Power supply varies from AC (mains power or Generator) and DC (Solar or Battery)

The IP66 off-grid Solar Inverter (RSI) is designed to for solar water solutions, offering low (or nearly no) operating costs. It is incredibly easy to setup and install, and pairs easily with SP submersible pumps as well as a broad range of Grundfos pumps, creating a modular system which allows maximum components flexibility.

SPK are vertical multistage pumps designed for pumping of cooling lubricants for machine tools, condensate transfer and similar applications. The pumps are designed to be mounted on top of tanks with the chamber stack immersed in the pumped liquid

The DP AUTOadapt series of pumps is fitted with a suction strainer on which the pump stands. The DP series is designed for pumping drainage and surface water, groundwater, and industrial process water without solids and fibres.

The EF AUTOadapt range of pumps is designed for use free-standing or for installation on an auto-coupling system. They are suitable for pumping effluent and other liquids.

The Grundfos range of SE1 pumps is designed for handling wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility, and industrial applications.

The Grundfos range of SEV pumps is designed for handling wastewater, process water and unscreened raw sewage in heavy-duty municipal, utility, and industrial applications.

The SLV Super Vortex range of pumps range have been designed and manufactured to be an effective solution for the pumping of liquids with a high concentration of solids, fibres, or gassy sludge.

Unilift AP35 is a submersible pump designed for pumping dirty water, untreated wastewater (excluding toilet discharge) and liquids containing fibres from light industry, laundries, etc. with particles up to ∅35.

Unilift AP50 is a submersible pump designed for pumping dirty water, untreated wastewater and liquids containing fibres from light industry, laundries, etc. with particles up to ∅50.

Unilift AP50B is a submersible pump designed for pumping effluents. The pump is suitable for installation on auto coupling allowing easy access to the pump for maintenance and other purposes.

The Fluid-o-Tech® IG series positive displacement pumps have been designed to handle viscous fluids with impurities in suspension and to withstand relatively high temperatures, while delivering a smooth flow.

This compact precision performance pump is designed to fit high technology applications. The magnet drive principle provides a totally sealed pump chamber which is capable of handling a wide range of corrosive fluids with a high degree of safety.

This compact precision performance pump has been manufactured to fit high technology applications. The magnet drive principle provides a totally sealed pump chamber which is capable of handling a wide range of corrosive fluids with a high degree of safety.

The MK200 and MK300 series pumps are designed to handle high viscosity fluids and a wider offer of materials to suit most applications, from the food to the industrial and chemical markets.

The MK series pumps are designed to complete the existing MG series with improved performances in terms of flow rate, pressure, capability to handle high viscosity fluids and a wider offer of materials to suit most applications, from the food to the industrial and chemical markets.

The Speck NP Series of pumps are High Pressure Triplex Piston pumps suitable for pumping clean water and other non-aggressive or non-abrasive media with a specific weight similar to water.

The Compact and Compact Plus series rotary vane pumps offer high performance despite their small size. They are suitable for applications such as espresso coffee machines, beverage vending machines, post-mix drink dispensers, water treatment, water dispenser and cooling systems.

The GA pump-motor unit has been designed to extend the Fluid-o-Tech® rotary vane pump range to the low flow rates. Coupled to a compact but powerful 24 V DC brush or brushless motor, the unit has been designed to deliver a maximum pressure of 10 bar (145 psi) and grant a long service life while fitting in tight spaces

The PO 500-1000 series high volume rotary vane pumps are available in six flow ratings to meet the needs of high volume pumping. Applications include post-mix drink dispensers, cooling systems, water treatment and booster systems.

The PO 70-400 series rotary vane pumps are volumetric pumps designed for pumping water and moderate aggressive liquids with low flow at high pressure.

The PO 70-400 series rotary vane pumps are volumetric pumps designed for pumping water and moderate aggressive liquids with low flow at high pressure.

The 4000 series rotary vane pumps are high technology volumetric pumps, available in 7 different displacements. Applications include reverse osmosis, cooling systems, car wash and irrigation. The pump housing, the rotor and every metallic component are in AISI 303 stainless steel.

The Fluid-o-Tech® magnetic drive rotary vane pumps TH 500-1000 series range combines the larger flow rate (500 to 1000 l/h at 1450 rpm) with the added benefit of the magnetic coupling. Applications include cooling systems, booster systems, water treatment and solar systems.

The Fluid-o-Tech® magnetic drive rotary vane pumps TM 30-200 series range combines the lower flow rate (30 to 200 l/h at 1450 rpm) with the added benefit of the magnetic coupling. Applications include espresso coffee machines, cooling systems, water treatment, booster systems and solar systems.

The Fluid-o-Tech® magnetic drive rotary vane pumps TH 300-400 series have been designed to deliver a smooth flow reliably for a long time with the added benefit of the magnetic coupling. Applications include cooling systems, water treatment, booster systems and solar systems.

The Fluid-o-Tech® magnetic drive rotary vane pumps are available in 6 different displacements. Applications include espresso coffee machines, soda circulation, reverse osmosis, solar heating systems, cooling systems, refrigerating gas transfer.

The TMFR series is an integrated pump-motor unit that offers superior performance, low energy consumption and silent operation to provide great versatility in a refined, high tech design.

The "Duplex" oscillating piston pump is designed for pumping various liquids. It has been designed to be compact in size and manufactured for superior performances and reliability. It operates on the oscillating piston principle.

The Syrup series solenoid pumps are corrosion resistant wetted parts capable of withstanding the acidic composition of various beverage syrups. They are manufactured for efficiency, offering low operation costs, compact design and high pressure.

The TOE-G series from Speck is a quality range of heat transfer centrifugal pumps with radial impeller in modular design, mechanical seal or magnetic coupling

The GY-028-1/2/3 series of pumps are close-coupled pumpswith a mechanical seal. They have a steep characteristic curve and compactdesign, providing high pressures that are suitable for the delivery of gasshares.

These non-self-priming centrifugal pumps with electronically commutated direct current motor, in a canned motor version, are maintenance-free. They can be set to various motor speeds.

These self-priming, gas handling side channel pumps also handle liquids not containing solid matter and can be used for hot water applications or applications with great suction heights, for example boiler feed pumps or condenser pumps.

The Speck NP Series of pumps are High Pressure Triplex Piston pumps suitable for pumping clean water and other non-aggressive or non-abrasive media with a specific weight similar to water.

The P Series are High Pressure Triplex Piston pumps designed to pump clean water and other non-aggressive or non-abrasive media with a specific weight similar to water.

The DVT Series by Becker features a line of 100% oil-free combined vacuum and pressure pumps. They satisfy both your vacuum and pressure requirements.

The DVX Series by Becker are a line of 100% oil-free combined vacuum and pressure rotary vane pumps. The X Series are equipped with specially developed vanes, these oil free rotary vanes pumps distinguish themselves through high abrasion resistance, and their extremely long service lives. Since no dust develops because there is virtually no wear, the series X pumps are perfectly suited for precision processes under clean room conditions.

The T Series by Becker features a line of 100% oil-free combined vacuum and pressure rotary vane pumps. They satisfy both your vacuum and pressure requirements.

The X Series by Becker features a line of 100% oil-free combined vacuum and pressure rotary vane pumps. The X Series are equipped with specially developed vanes, these oil free rotary vanes pumps distinguish themselves with high abrasion resistance, and extremely long service lives. Since no dust develops because there is virtually no wear, the X series pumps are perfectly suited for precision processes under clean room conditions.

The DX Series by Becker are a line of 100% oil-free pressure rotary vane pumps. The X Series are equipped with specially developed vanes, these oil free rotary vanes pumps distinguish themselves by high abrasion resistance, and with that extremely long service lives. Since no dust develops because there is virtually no wear, the series X pumps are perfectly suited for precision processes under clean room conditions.

The DXLF Series by Becker are a line of 100% oil-free pressure rotary vane pumps. The X Series are equipped with specially developed vanes, these oil free rotary vanes pumps distinguish themselves by high abrasion resistance, and with that extremely long service lives. Since no dust develops because there is virtually no wear, the series X pumps are perfectly suited for precision processes under clean room conditions.

The KDX Series by Becker are a line of 100% oil-free pressure rotary vane pumps. The X Series are equipped with specially developed vanes, these oil free rotary vanes pumps distinguish themselves by high abrasion resistance, and with that extremely long service lives. Since no dust develops because there is virtually no wear, the series X pumps are perfectly suited for precision processes under clean room conditions.

The VARIAIR SV series of pumps leverages high performance and is 100% oil-less. Contact-less operation provides you with a quiet, compact regenerative blower.

The Lowara series of e-HM of horizontal multistage centrifugal pumps features advanced technology hydraulics alongside an IE3 motor. This facilitates high operational efficiency that also results in lower operating costs.

The BG series from Lowara are a range of self-priming close-coupled centrifugal pumps with built-in ejector system, designed to remain primed even in the presence of water-dissolved gases.

The BGR series is a range of close-coupled self-priming centrifugal pumps with built-in injector system, designed to remain primed even in the presence of water-dissolved gases. The extensive use of pressed stainless steel ensures a high-performance, durable and lightweight pump.

The CO series of pumps combine the advantages of an open impeller with those of the AISI 316 stainless steel construction, making them well -suited for handling moderately aggressive liquids with suspended solids.

The Lowara e-SH series is a single impeller centrifugal pump made in AISI 316 stainless steel, making it the right pump for moving water as well as aggressive liquids across an array of applications where high chemical resistance is required.

The DN Series are Lowara"s range of submersible electric Pumps for drainage of clean and slightly dirty water with up to 22 metres head and up to 280 l/min (16,8 m3/h) delivery.

The Lowara 1300 series is a submersible pump line that delivers pure performance at outstanding value for sewage and surface wastewater within commercial building applications.

The Lowara range of DIWA pumps consists of submersible pumps that have been designed for clean and slightly dirty water manufactured in AISI 304 stainless steel.

The DL series electric pumps come with single-channel or Vortex impeller (DLV), and are designed to handle solids-laden wastewater,with up to 22 m head and 42 m3/h delivery.

The DOMO series electric pumps are available with twin-channel or vortex impeller (DOMO VX). They are designed to handle liquids with suspended solids up to 50 mm in diameter (35 mm for DOMO 7 and DOMO 7VX).

The GL series of Lowara pumps are submersible electric pumps designed for circulation of sewage water containing suspended solids, emptying of domestic wastewater tanks and for the the drainage of excavations and marshy grounds.

The DOL Starter, housed in a robust, powder coated, lockable metal enclosure, provides a very cost effective way of controlling a pump where the usual standard features, typically available in pump controllers, are not required.

The new FPC-300-Advanced version, further enhances the “One controller does it all” concept, while at the same time, makes “simplicity of operation” even more user friendly. Although many unique features of the controller are common to all pumping applications, many "system specific" optional features, can be enabled or disabled at the flick of a switch.

The Matelec controller system provides the means of controlling an automatic pump, used to pump water from a tank into the home. The system provides for "Low Voltage" cabling between the float switch, situated in the storage tank, and the controller. When the storage tank is empty, the controller inhibits the pump and the "Low Level" light is illuminated. Power to the pump is restored once water level in the tank has risen to the reset level.

Self priming booster set easy to install and plug and play, equipped with a built in frequency converter a pressure sensor on the discharge side, a built in pressure vessel in the pump casing and a non return valve on the suction side.

The NCE EI series is an energy saving variable speed circulating pump driven by a permanent magnet synchronous motor (pm) controlled by on board inverter.

Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 30 kW, new bracket construction for standard motors (stub-shaft construction) from 37 to 75 kW with integrated thrust bearing.

Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 15 kW, new bracket construction for standard motors (Stub-shaft construction) from 18,5 to 75 kW with integrated thrust bearing.

The M COMP series from Calpeda includes control panels with ON-OFF switch and capacitors for single-phase submersible pumps. They are suitable for use with LVBT board for level control.

Close-coupled gear pumps (rotary pumps). Pump casing with suction and delivery connections with the same diameter and on the same axis (in-line execution).

This range from Calpeda includes submersible borehole pumps for 4” wells (DN 100 mm), and 6” (DN 150 mm), with external jacket in stainless steel AISI 304 and stages in polycarbonate for 4SD pumps and in noryl for 4SDF, 6SD, 6SDN pumps.

Stainless steel construction designed and built for years of trouble free operation designed and built to operate in difficult conditions. Suitable for pumping clean, thin, non-aggressive and non-corrosive liquids without solid particles or fibres. 4SDX, 6SDX, 8SDX and 10SDX models available.

Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and suction non-return valve. Suction capability up to 1 mm from the bottom.

The MP series of pumps from Calpeda consist of multi-stage centrifugal submersible pumps with pump jacket in chrome-nickel stainless steel, with vertical delivery port.

This series of stainless steel pumps from Ebara features a unique one piece volute casing that are produced using an advanced computer controlled plasma stamping system that ensures total quality control during manufacture (up to 65-200/22).

The GSD is a versatile high quality compact close coupled motor pump, and with 237 pump end/motor combinations available there are models suitable for many applications and duties wherever water needs to be transferred or boosted.

The Ebara JESX series consists of stainless steel jet pumps for the boosting or transfer of water, small scale irrigation, tank & pool emptying, etc. Suitable for installations with suction lift.

Stainless steel jet pumps for the boosting or transfer of water, small scale irrigation, tank & pool emptying, etc. Suitable for installations with suction lift.

The EVMSG Series is a non-self-priming, vertical multistage in line centrifugal pump offering providing high discharge heads and high efficiencies, with an in-line design. It requires minimal floor space for installation

Best 2-5 submersible pumps are manufactured in AISI 304 Stainless Steel. They are available in single phase automatic or manual, three phase (manual only). This is a versatile series that is suitable for both fixed or mobile installations.

The Best One MA Series from EBARA is a domestic sump pump suitable for a variety of dewatering applications, including: draining wells, basements, cellars, emptying of tanks and the general transfer of water.

The Best One Series consists of a domestic sump pump manufactured in 304 stainless steel with a semi-open impeller (Best One) and a Semi Vortex impeller (Best One Vox).It is uitable for many light dewatering applications.

The DS Series has an open impeller design that provides high heads and efficiencies. The pump is suitable for many sump applications including:- draining wells, lift shafts and tanks, irrigation, drainage, water supply, general transfer of water.

Submersible electric pumps for clean water manufactured in AISI 304 Stainless Steel, with technopolymer impeller. Suitable for many light weight dewatering applications.

The DML Series from EBARA is a submersible sewage pump with single channel impeller that is an effective solution for a variety of applications including sewage wastewater and stormwater drainage

The DVS Series are submersible semi-vortex pumps that are ideal for wastewater applications containing soft or fibrous solids. They are suitable for industrial wastewater drainage, septic effluent and miscellaneous drainage.

The DW Vox Series is a submersible pump with a vortex impeller, handling up to 50 mm solids. It features an all stainless steel construction, with double mechanical seal in oil bath.

The Right Series from Ebara is a submersible pump with semi-vortex impeller, handling up to 35 mm solids. Consists of completely stainless steel construction, with double mechanical seal in oil bath.

Capable of handling large particles at consistently high efficiency, resulting in lower costs. Casing is designed with a large volume internal profile to reduce associated velocities which prolong component life. Designed to pump extremely aggressive slurries with a wide particle distribution.

The KETO K-HS slurry horizontal pump range is engineered with the latest hydraulic and wear technologies to cope with the most severe corrosive and abrasive slurry applications. The pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping.

K-L heavy-duty horizontal pumps have been developed for continuous use in slurry applications where low to medium developed head is required. The pumps are designed for lighter slurry densities up to 1,35.

KETO K-TC™ vortex pumps are designed for use where slurry particles are fragile and damaging them is detrimental to the process. The vortex created by the impeller transfers energy to the slurry without direct impact from the vanes on the particles. This allows particles to be pumped without damage.

Based on the K-HS™ design, but specifically designed for pumping froth. The innovative K-HSF™ Horizontal Froth pump design allows for froth and other products to be handled efficiently and without issues usually associated with pumping products with high viscosity.

The K-VS heavy duty vertical sump pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. It is suited for applications that demand greater reliability and durability than conventional vertical process pumps can offer.

The Vantage 3000 series of tube pumps offer highly accurate, repeatable dosing, for low to medium flow. Suitable applications include pharmaceutical and laboratory scenarios.

The Verderflex range of "VF" industrial peristaltic hose pumps are engineered to handle difficult substances such as slurry, sludge, suspensions, solid-laden and thickened, viscous fluids. The fluid is contained within a flexible hose.

Verderflex Dura series range of Peristaltic pumps has been manufactured according to the latest technology for optimum efficiency and subject to continuous quality control.

The Verderflex Rapide series is an Industrial range of tube pumps that provide a simple solution to the challenge of operating peristaltic pumps. These pumps are compact and don"t require tools for the tube change process.

The Vantage 3000 series of tube pumps offer highly accurate, repeatable dosing, for low to medium flow. Suitable applications include pharmaceutical and laboratory scenarios.

The D series are helical rotor self priming metering pumps that can be utilised in nearly all industries where metering and dosing of precise quantities is required.

The SEEPEX CS series are helical rotor pumps designed for food grade applications where cleanliness, sterilization and hygiene are of the upmost importance. They are self priming and designed for use in the food, beverage, pharmaceutical, cosmetics and personal care industries.

The D series are helical rotor self priming metering pumps that can be utilised in nearly all industries where metering and dosing of precise quantities is required.

The Seepex N series are helical rotor pumps which are responsible for pumping liquids of different viscosities with or without solids. These can be abrasive or even corrosive liquids. They are highly efficient, self priming, easy to maintain, leave a minimal footprint and have low life-cycle costs.

The T series of Seepex pumps are used for viscous media that have only little or no flowability. They have a feed hopper and an auger feed screw to positively feed the product into the pumping elements.

Pumps of product group W can be used in almost all industries. They are designed to handle liquids of all viscosities and even products with high solids contents. They are cost effective and versatile.

The E series range of pumps from Seepex consists of semi-submersible pumps that offer high efficiency, a minimal footprint and a maintenance-friendly design.

The BALZ 100 series is manufactured from the very best materials available, providing both excellent wear properties and corrosion resistance. High chrome and urethane wear resistance parts ensure excellent results for arduous pumping solutions.

Featuring the unique patented bubble sealing system as well as a urethane and rubber pump casing, the 200 series offers excellent performance and wear resistance.

The complete filters (housing and cartridges) for vacuum pumps are an important component of air filtration. Filter Technics produces a wide range of standard complete filters (from 3.8″ to 6″ with flange) compatible and interchangeable with the original references of the most important worldwide vacuum pumps and, upon request can design and produce filters with flows up to 4.000 m3/h.

Our oil separator elements are manufactured by Filter Technics in Italy where they produce a range of filters which are extremely efficient and give a long working life, attention to detail and quality are a signature of Filter Technics. We offer a wide range of oil separators for vacuum pumps which can satisfy most of the market requirements.

DG PED is an automatic pressurisation system with an inverter which integrates a built-in high efficiency self-priming pump, a accumulator tank, pressure and flow rate sensors and a non-return valve