gorman rupp mud pump pricelist

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for medium to high head contractor and bypass applications

Priming assisted, centrifugal, solids-handling pumps, venturi and compressor priming system for high head/high flow contractor and bypass applications

Since 1933, Gorman-Rupp has manufactured the high-performance, high-quality pumps and pumping systems required for lasting service in the municipal, water, wastewater, sewage, industrial, construction, petroleum, mining, fire, and OEM markets.

In addition, Gorman-Rupp manufactures a complete line of state-of-the-art packaged lift stations and booster stations that include pumps, motors, controls, piping, accessories and enclosures.

Effective immediately, due to supply chain challenges, Gorman-Rupp Pumps (Engineered Systems) is temporarily substituting Allen-Bradley PowerFlex 753 Variable Frequency Drives (VFD) with the Allen-Bradley PowerFlex 755 Variable Frequency Drives (VFD). At this time, there is no additional cost for the substitution. We will continue to monitor availability, and will provide notification when availability returns for

Gorman-Rupp is the industry leader and innovator in high-quality pump design. At Envirep/TLC, we will help you choose the best Gorman-Rupp pump parts for your needs. Our goal is to provide you with easy to operate, low maintenance pump parts to ensure you are being as cost-effective as possible

Envirep/TLC is an authorized distributor of Gorman Rupp pumps and pump products and we carry a huge inventory of spare parts so our customers receive the best service possible.

When repairing Gorman-Rupp pumps, it is always best to use genuine Gorman-Rupp pump parts. Gorman-Rupp builds their parts to exact tolerances and exact material specification. Not having the right part can reduce the service life and effect the life of the pump, other parts in the pump, and the efficiency of the pump. Only genuine Gorman-Rupp parts can guarantee that your part will fit perfectly, and deliver reliable service for many years.

The Gorman-Rupp Super T Series pump with Eradicator™ Solids Management System are a series of self-priming centrifugal pumps designed specifically for handling municipal and industrial wastewater containing stringy, difficult-to-pump, solids in suspension (such as wet wipes, rags and feathers).

They have been designed for economical, trouble-free operation, with design features that deliver superior solids handling capability and a large inspection cover to access pump internals for service or blockage removal. Gorman-Rupp Super T Series wastewater and sewage pumps have been used for pumping of WAS and RAS and for digester recirculation with great success in wastewater treatment plants around the country, as well as food process plants, paper mills and other heavy industries. The Eradicator™ system advances the solids handling capabilities of this range.

The maximum practical suction lift is about 7.5m, but to achieve that the pump speed needs be sufficient for the re-prime lift (re-prime lift capability at the range of speeds is published on Gorman-Rupp Super T series and Ultra V series curves). NPSH is also another key consideration especially on the large suction lifts. We can advise on the max suction lift on your application, just contact us with the details.

Absolutely yes ! provided they are correctly installed with particular attention to suction line configuration and provision made for air to be evacuated while the pump is priming the suction line.

Noise varies as to the speed of the pump and where it is operating on the performance curve. A Gorman-Rupp Super T series pump operating in mid curve will typically be less than 70dBA at 1m with most of the noise coming from the standard foot mounted motor, towards top left of curve the noise increases on any pump. If your application is particularly sensitive to noise, run it by us and we will give you an honest expectation on the noise level

We can handle up to 3” spherical solids on Gorman-Rupp T series pumps (from T4 through to T10), the T3 can handle 2.5” solids, the T2 1.5” solids. Solids handling is not all about free passageway, the Super T Series Eradicator system deals with rag build up as it enters the eye of the impeller (Click here for more information on the Eradicator system)

Vee belt drive means the pump performance can be changed by the pulley ratio while using a full size impeller. If the pump is direct coupled rather than vee belt driven, an impeller trim or variable speed drive (inverter) is needed to vary performance. On our design of baseplates and motor stools there is also the added advantage of the rotating assemblies being removable via the motor stool cavity without disturbing the pump casing or motor.

That depends on the application. On fairly light duties like a raw sewage pumping station it is not uncommon for a pump to last over 30 years, we have plenty out there in the field over that age. On highly abrasive applications like mud or grit pumping, obviously the lifespan of the pump is less but we can offer austempered ductile iron (hard iron) parts for those applications to extend the life as far as we can

The pumps are surface mounted which means easy access for maintenance without using lifting gear or a involving a confined space entry (in the case of dry well pumps).

NPSH is Nett Positive Suction Head. For a pump to function correctly NPSH must be positive. A positive system is where after a vacuum has been formed and the pump is fully primed, there is enough atmospheric pressure available to push the liquid into the pump and through the pump at the required rate. As part of making a pump selection we do something called a NPSH calculation where we calculate NPSH available from the system by considering things like static suction lift, suction pipework losses, vapour pressure correction, altitude correction and atmospheric pressure safety factor. From that we subtract the NPSH required by the pump (which is published on the performance curves at the flow range). If that calculation is positive then the pump will perform as required, if its negative something has to change in the system or pump selection.

An automatic air release valve provides an easy passage for air to be evacuated while the suction line is being primed. They need to be installed before a discharge non return valve. The discharge non return valve holds the pressure back while the air release valve does its job. Generally we say if the pump needs to develop air pressure of over 5m to lift a discharge non-return valve, then an automatic air release valve should be fitted.

Yes, if the effluent contains those types of items, then we recommend the Gorman-Rupp Super T Series fitted with Eradicator system. Click here to find out some more information

If the pump operates on a suction lift, then generally we say 4% is a good maximum guideline. If the pump operates on a flooded suction, then this can be pushed out to 5% -7% but we recommend on site trials since the sludge characteristics at each site can vary, its not all about % solids.

Give consideration to the route air will be evacuated, use automatic air release valves at their correct setting in conjunction with discharge non-return valves. Submerge the air release line outlets 150mm below pump stop level.

Generally submersible pumps (either wet well or dry well) will be less initial cost than Gorman-Rupp T series. The better return on investment (ROI) on Gorman-Rupp pumps comes from the far longer asset lifecycle, reduced civil engineering costs, and reduced maintenance costs.

No, we carry extensive stock at our Peterborough location which enables us to ship common replacement pumps and spares same day or next day. Gorman-Rupp also have a huge inventory of pumps at spares at their Netherlands and USA based warehouses which we expedite using very efficient International Freight companies.

Wet prime pumps need some liquid retained in the casing and use a recirculation method to prime. Gorman-Rupp pumps are designed to retain enough liquid in the casing to re-prime even if the internal suction check valve does not seat fully. They have advantages of dry prime in the fact they do not require any other equipment to prime.

Dry prime pumps use either a venturi or diaphragm device to prime the suction system. The pump is a traditional end suction centrifugal type. Dry prime type pumps can handle large volumes of air in the case of long suction lines and can often be used where dry running (ie intermittent incoming flow into the sump) occurs.

Centrifugal action creates a low pressure point at the eye of the impeller, the partially full casing throws a mixture of air and water into the priming chamber (an integral part of the pump casing), the water in that chamber recirculates back into the suction via a port at the bottom of the casing, whilst the air rises to the top of the priming chamber to be vented off via the air release line or discharge system. This process continues until all the air is evacuated from the suction system, at which point the pump is able to develop discharge pressure and lift the discharge non return valve.

Phantom Pumps designs affordable, self-priming pumps that are compatible and interchangeable with Gorman-Rupp pumps as well as with equipment from other well-known manufacturers such as ESCO, All Prime, Durco, Warman and more. Phantom Pumps PL Series pumps are an excellent lower-cost alternative that processing operations are substituting for Gorman-Rupp low pressure models. PL Series Phantom Pumps and Gorman-Rupp Super T Series® pumps offer nearly identical features and benefits such as the following and more:

Phantom Pumps PH Series high pressure, stainless steel, cast iron and CD4Mcu pump models feature impellers that can handle solid maximums up to 1-1/4 inches and are ideal replacements for many U-3, U-4 and U-6 Series Gorman-Rupp pumps. Our Phantom Pumps team of engineers is always available to help determine which high quality pumps in our line best are suited for specific applications.

Processing facilities in Florida, Georgia, Alabama, South Carolina, North Carolina and beyond also often lower costs related to the repair and maintenance of existing Gorman-Rupp models such as U and Super T Series® pumps by using Phantom Pumps compatible and interchangeable replacement parts. Phantom Pumps Authorized Distributors provide processors with everything from local inventory of pumps and parts to application expertise, start-up assistance, technical support and more. Cross-reference materials, technical data and free quotes are available from our courteous and knowledgeable Phantom Pumps specialists. Contact us today to learn more about reducing pump costs at your facility.

HSK Series™ Hydraulic-Driven, Positive Displacement Piston Pump. Built to tackle the toughest of applications involving heavy sludges, slurries or other viscous materials

Gorman-Rupp’s Tankleenor provides quick, efficient and economical cleaning of petroleum storage tanks. The unit is a lightweight, wheel mounted cleaning system designed for one-man operation and is easily moved from job to job.

Gorman Rupp silent pumps include all of the benefits of the self priming product line with all the same cost effective and easy maintenance systems, with the large solids handling abilities.

Roto-Prime pumps are actually two pumps in one: a variable capacity vane pump used during the priming cycle, and a standard centrifugal pump to move the liquid.

Gorman Rupp Packaged Pump Stations are customisable above and below ground lift stations to suit a wide range of applications, the packaged pump stations are a simple process for the end user to simply place in the position, connect the pipe & electrical supplies.

Gorman Rupp PTO Series pumps provide the performance to handle the rates of fuel required by service carriers and suppliers. These pumps are ideal for handling fuel oil, gasoline or other petroleum based products.

With a variety of sizes and operating ranges, Gorman-Rupp’s extensive line of Prime Aire® and Prime Aire Plus priming-assisted (dry prime) pumps are hard-working, dependable and ready to tackle the toughest applications including large solids and slurries.

Gorman-Rupp hydraulic submersible pumps are designed for portable use where electrical power is not always available or where there is a requirement for a submersible pump in a hazardous environment.

The Gorman Rupp HS Series can operate fully submerged in many different types of hazardous locations. Variable Speed Control means the pump speed can be varied to suit job requirements, providing maximum efficiency and minimum fuel consumption.

The ValuPrime from Gorman Rupp is a dynamic, compact, and powerful pump suitable for application in the dewatering needs of the construction, industrial, and agriculture markets. TheFinal Tier IV Isuzu engine make this pump capable of pumping up to 1,500 gpm.

The GHC iron series is HEAVY DUTY rotary gear pump designed for use with any clean liquid compatible with cast iron. This includes booster service, circulating, filtering, lubricating, transferring, low pressure and fluid power.

The GMC series is a MEDIUM DUTY rotary gear pump designed for use with any clean liquid compatible with cast iron. This includes booster service, circulating, filtering, lubricating and transferring.

The Gorman Rupp 80 Series range consists of medium head, mild solids-handling, self-priming centrifugal pumps which are designed for non-stop work loads.

The PAH Series range of pumps from Gorman Rupp are priming-assisted pumps designed and engineered for the most rugged and demanding mining, construction, municipal, agricultural and industrial applications.

Gorman Rupp Pump manufactures of all types of trash pumps, submersible pumps, portable pumps, high-pressure fire pumps, and self-priming pumps. Centrifugal and diaphragm pumps. Electric Gas Diesel powered. Mansfield, OH. OTS Off-The-Shelf & IPT pumps program.

Gorman Rupp pumps will meet any pumping situation you may have. For more than 80 years, Gorman-Rupp has manufactured the high-performance, high-quality pumps required for lasting service in the contractor and industrial fields. Complete line of AMT pumps. Made in America

In addition to the electric motor, many pumps are powered by Honda engines. If you need durability and reliability, these GR Pumps with Honda gas powered engines are just what you are looking for.

Designed for the harshest environments, the Gorman-Rupp line of EXPlosion Proof pumps have a long history of quality and reliability. These self-priming pumps handle flammable and hazardous liquid material.

GR Pumps meet the needs of virtually any industry. From circulator pumps to hazardous material, GR Pump move water, chemicals, sludge, trash, mud, and more. Contact us to discuss your application and we will be sure your GR Pump meets your needs.