hmi hydraulic mud pump free sample

The HMI HM-1 hydraulic mudjacking pump was the first concrete raising product engineered and manufactured by HMI, just over 40 years ago. It’s reliability and superior engineering maintains its place in the market, but has also acted as the springboard for other, more advanced models / options which offer various options of engine horsepower, hopper size, pumping pressure, and so much more.

Our largest, self-propelled, multi-functional pump. This rugged and durable pump is the top-of-the-line mudjacking unit. With the highest available pumping pressure, largest material hopper, most horsepower and versatility.

Our most popular model, the self-propelled, hydraulic mudjacking pump drives circles around the competition. Affordable and durable, the Power Pump is a great way to start-up or add to a concrete raising business.

Rugged terrain? No problem:The Versa Pumps’ swivel-action front axles keep all four wheels on the ground, allowing you to skillfully navigate those rugged and seemingly inaccessible terrains.

Controlled Versatility:Equipped with a wireless remote, you will be able to control the pumping action at the nozzle when long hoses are required for those hard to reach jobs. No other mud pump on the market offers this advanced feature!

Over recent months I became familiar with an ideal execution of this program where HMI, (www.ConcreteRaisingSystems.com) a concrete lifting and leveling manufacturer commissioned Logical Engine,  a business app software developer to create a system to maximize the efficiency of their customers. A tour of that systems and the potential can be viewed at (http://www.mudpumps.com/information-center/estimate-rocket/).

Lone Star Drills, a division of Little Beaver Inc. and manufacturer of efficient and portable drilling equipment, upgraded its LS200H and LS200H+ model drills with a Flomax 10 mud pump powered by an 8-horsepower Honda GX240 gas engine. The enhanced pump gives operators greater drilling speeds with approximately 40% more pressure and 30% more gallons of mud flow per minute over the previous pump setup.

“A mud pump is a crucial piece of equipment for ensuring mud rotary drilling efficiency,” said Joe Haynes, president of Little Beaver. “The feedback we’ve received from trials with this new setup has been outstanding. Crews were drilling noticeably faster than before because the system is providing a better flow of mud into the borehole, so we’ve made the new pump and engine a permanent fixture in our drill lineup.”

The new pump and engine come standard on the LS200H and LS200H+ hydraulic water well drills and are an optional upgrade for the LS100 and LS200 mechanical water well drills. A 10-horsepower Yanmar L100N diesel option is also available to power the Flomax on the LS200H and LS200H+.

The new Flomax 10 pump paired with the 8-horsepower engine provides 61 psi and 200 gallons of mud flow per minute, an upgrade of nearly 20 psi and an additional 50 gallons of flow per minute. The Flomax features a 2-by-2-inch inlet and outlet and incorporates tighter tolerances to handle the increased pressure from the larger engine.

Haynes said the increased pressure allows the new pump setup to not only quickly fill the borehole with a column of mud to remove cuttings more efficiently during drilling, but also handles thicker mud than the previous pump system. This provides crews with increased borehole stability as it replaces the dirt removed during drilling.

Lone Star Drills’ LS200H and LS200H+ water well drills are capable of drilling depths of 200 feet, borehole diameters of six inches and pull/push-back forces up to 5,000 pounds. The first drills in the Lone Star hydraulic lineup, the LS200H and LS200H+ feature 2,500- and 3,000-psi hydraulic systems respectively. Both drills can be upgraded with a down-the-hole hammer kit, anchor kit, wheel kit and more.

Centerline Manu-facturing introduces the CLM 7.5 x 10D hydraulic mud pump, a pump which utilizes common fluid end parts. Its advantages are said to be its flow capacity, rated pressure, size and weight. It is designed to pump 100 percent more rated flow than a standard 5x6 and up to 3.25 times the rated pressure. However, it only has a third of the weight and 77 percent of the length.

A well-placed suction stabilizer can also prevent pump chatter. Pump chatter occurs when energy is exchanged between the quick opening and closing of the reciprocating pump’s valves and the hammer effect from the centrifugal pump. Pump isolation with suction stabilizers is achieved when the charge pumps are isolated from reciprocating pumps and vice versa. The results are a smooth flow of pumped media devoid of agitating energies present in the pumped fluid.

Manufacturer of concrete raising equipment & mud jacking & polyurethane accessories. Distributor of used equipment. Various products include pumps, trailers, hopper trucks, gun clamps & tips, insertion guns, breakers, hammers, drills, remote controls, bins, bits, compressors, extension cords, foam, generators, grease, hose, mixers, kits, O-rings, ports, hydraulic power-packs, ramps, reactors, rigs, electric saws, material screens, switches, tires, transmitters & workbenches. Made in USA.

HMI is proud of all its innovations and products, but perhaps the greatest innovation is the Quik Mix Pro automated volumetric hopper/mixer unit. The first fully automated unit rolled off the production line in March of 2003. This slabjacking unit, when mounted on a truck body, can carry a slab raising pump, dry material, cement, and water. Along with its unique twin shafted mixer, it can automatically mix and place material into the hopper of a pump. No shoveling is required!

Expanding beyond just the slabjacking industry, in 2008 HMI developed a revolutionary new Hydraulic Power Pack 10. With a new 2 in 1 design it offers 10,000 psi at 1 ½ gallons per minute, or 3,000 psi at 9 gallons per minute. Not only is the unit great as a seperate hydraulic power pack for running hydraulic tools (mixers and mudpumps), piering contractors can use it to install helical and resistance piers.

Hydraulic Mudpumps, Inc. is committed to future refinements and development to its product line. Our future will be determined by requests from you, our customer, and the upcoming industry demands.