mud pump threaded ring pricelist

Titan Oil Tools offers high quality mud pump expendables and mud pump replacement parts for the wide variety of mud pumps, centrifugal pumps found on the world market today. These quality pump parts offer great performance and our pricing will save you money.

We are your oilfield supplier of choice for mud pump spares and mud pump parts: mud pump piston liners and pistons. All mud pump parts can be sourced for fast delivery; Come to us for mud pump liners, pistons, piston rods and parts, pony rods, threaded rings and caps,and more. Try us for duplex and triples pump spares and duplex and triplex mud pump parts, and also valve parts like valve seats. gland nut, and mud pump gaskets.

Mud pump liners may come in chrome, alumina ceramic and zirconia ceramic. Chrome liners and alumina ceramic liners are less costly, their cost of replacement over one year as the chart below shows, is much more than zirconia ceramic liners.

The table below shows a Mud Pump Liner Cost of Ownership which shows a reasonable cost comparison for a rig in continuous service for 36 months. This of course does not include the high cost of maintenance downtime and the cost of labor.

The prices below are based on cost/cylinder. Savings increase when you add up the number of pump cylinders on your rigs and extend the savings to understand the big difference it can make for your budget.

Ideco is one of the parts of a mud pump that is complete with high quality parts. This is a name that is a leading manufacturer of high quality parts of the fluid end such as the following:Modules

The Ideco pumps allow an addition in the quality trading of the replacements parts of the mud pumps and their parts that also take into account the following varieties such as:Centrifugal pumps

All of the above mentioned ingredients are found in the market and are available for better oil drilling and extraction. There are more than 1000000 varieties of inter changeable mud pump constituents and all the previously mentioned types like centrifugal pumps, parts of a rig and swivel components for the majority of the manufacturers and this includes Ideco. Their components include:Duplex pump spares

Parts of Ideco are provided with a full series of pistons for the triplex as well as duplex mud pumps. This is done for ensuring their popularity among the customers. All the manufacturers of the mud pumps and their parts make sure or try to make sure that their products and constituents are made under the certification of the American Petroleum Institute, the API. Some of them include:Bonded rubber pistons

The Bonded premium urethane piston is a single piece bonded constructed piston that does not have any joints which guarantees the prevention of leaking. The Ideco components like these eliminate the possibility of the abrasive fluids to accumulate between the liner and the piston. The expanded lip of the fluid is not damaged by faster strokes of the pump or high pressure actions. It is a fail proof piston that seals off to increased diameters as the liner keep wearing.

Parts of the mud pump like the pistons with replacement rubbers are currently running for drilling mud in the highest of pressures. It has a bonded construction as well as build without using leakage and joints. The longer size of the piston helps in guaranteeing the longevity of the equipment. The Ideco component helps the piston to function in higher pressure for ensuring a faster stroke. It is additionally resistant to the mud of the oil base as well as other additives that are put to use.

Pistons with replacement rubbers are actually the premium Ideco pistons or mud pump parts that have been serving the industry for a number of years with excellent and unparalleled performance records to suit extreme drilling conditions. This is a single piece bonded unit that has a number of benefits as it is impermeable to different kinds of chemicals as well as other kinds of oil.

we have been Identified by API and ISO9000 Authorization and supply: Handling Tools: Rotary Slips, Drill Collar Slips, Casing Slips, Safety Clamps, Manual Tongs, Elevator, Spiders and so on. Mud Pump: We manufacture popular mud pumps such as Emsco: F-500 mud pump, F-800 mud pump, F-1000 mud pump, F-1300 mud pump, F-1600 mud pump; Gardner Denver: PZ-9 mud pumps and so on. Parts are interchangeable on these popular pump models For more company profiles and products information, please visit our offical website or just feel free to send me an inquiry.

The mud pump piston is a key part for providing mud circulation, but its sealing performance often fails under complex working conditions, which shorten its service life. Inspired by the ring segment structure of earthworms, the bionic striped structure on surfaces of the mud pump piston (BW-160) was designed and machined, and the sealing performances of the bionic striped piston and the standard piston were tested on a sealing performance testing bench. It was found the bionic striped structure efficiently enhanced the sealing performance of the mud pump piston, while the stripe depth and the angle between the stripes and lateral of the piston both significantly affected the sealing performance. The structure with a stripe depth of 2 mm and angle of 90° showed the best sealing performance, which was 90.79% higher than the standard piston. The sealing mechanism showed the striped structure increased the breadth and area of contact sealing between the piston and the cylinder liner. Meanwhile, the striped structure significantly intercepted the early leaked liquid and led to the refluxing rotation of the leaked liquid at the striped structure, reducing the leakage rate.

Mud pumps are key facilities to compress low-pressure mud into high-pressure mud and are widely used in industrial manufacture, geological exploration, and energy power owing to their generality [1–4]. Mud pumps are the most important power machinery of the hydraulic pond-digging set during reclamation [5] and are major facilities to transport dense mud during river dredging [6]. During oil drilling, mud pumps are the core of the drilling liquid circulation system and the drilling facilities, as they transport the drilling wash fluids (e.g., mud and water) downhole to wash the drills and discharge the drilling liquids [7–9]. The key part of a mud pump that ensures mud circulation is the piston [10, 11]. However, the sealing of the piston will fail very easily under complex and harsh working conditions, and consequently, the abrasive mud easily enters the kinematic pair of the cylinder liner, abrading the piston surfaces and reducing its service life and drilling efficiency. Thus, it is necessary to improve the contact sealing performance of the mud pump piston.

As reported, nonsmooth surface structures can improve the mechanical sealing performance, while structures with radial labyrinth-like or honeycomb-like surfaces can effectively enhance the performance of gap sealing [12–14]. The use of nonsmooth structures into the cylinder liner friction pair of the engine piston can effectively prolong the service life and improve work efficiency of the cylinder liner [15–17]. The application of nonsmooth grooved structures into the plunger can improve the performance of the sealing parts [18, 19]. The nonsmooth structures and sizes considerably affect the sealing performance [20]. Machining a groove-shaped multilevel structure on the magnetic pole would intercept the magnetic fluid step-by-step and slow down the passing velocity, thus generating the sealing effect [21–23]. Sealed structures with two levels or above have also been confirmed to protect the sealing parts from hard damage [24]. The sealing performance of the high-pressure centrifugal pump can be improved by adding groove structures onto the joint mouth circumference [25]. The convex, pitted, and grooved structures of dung beetles, lizards, and shells are responsible for the high wear-resistance, resistance reduction, and sealing performance [26–28]. Earthworms are endowed by wavy nonsmooth surface structures with high resistance reduction and wear-resistance ability [29]. The movement of earthworms in the living environment is very similar to the working mode of the mud pump piston. The groove-shaped bionic piston was designed, and the effects of groove breadth and groove spacing on the endurance and wear-resistance of the piston were investigated [30]. Thus, in this study, based on the nonsmooth surface of earthworms, we designed and processed a nonsmooth striped structure on the surface of the mud pump piston and tested the sealing performance and mechanism. This study offers a novel method for prolonging the service life of the mud pump piston from the perspective of piston sealing performance.

The BW-160 mud pump with long-range flow and pressure, small volume, low weight, and long-service life was used here. The dimensions and parameters of its piston are shown in Figure 1.

A mud pump piston sealing performance test bench was designed and built (Figure 3). This bench mainly consisted of a compaction part and a dynamic detection part. The compaction part was mainly functioned to exert pressure, which was recorded by a pressure gauge, to the piston sealed cavity. This part was designed based on a vertical compaction method: after the tested piston and the sealing liquid were installed, the compaction piston was pushed to the cavity by revolving the handle. Moreover, the dynamic detection part monitored the real-time sealing situation and was designed based on the pressure difference method for quantifying the sealing performance. This part was compacted in advance to the initial pressure P0 (0.1 MPa). After compaction, the driving motor was opened, and the tested piston was pushed to drive the testing mud to reciprocate slowly. After 1 hour of running, the pressure P on the gauge was read, and the pressure difference was calculated as , which was used to measure the sealing performance of the piston.

To more actually simulate the working conditions of the mud pump, we prepared a mud mixture of water, bentonite (in accordance with API Spec 13A: viscometer dial reading at 600 r/min ≥ 30, yield point/plastic viscosity radio ≤ 3, filtrate volume ≤ 15.0 ml, and residue of diameter greater than 75 μm (mass fraction) ≤ 4.0%), and quartz sand (diameter 0.3–0.5 mm) under complete stirring, and its density was 1.306 g/cm³ and contained 2.13% sand.

Figure 4 shows the effects of stripe depth and angle on the sealing performance of mud pump pistons. Clearly, the stripe depth should be never too shallow or deep, while a larger angle would increase the sealing performance more (Figure 4).

Both the standard piston and the bionic striped piston leaked, which occurred after 84 and 249 minutes of operation, respectively (Figure 5). Figure 6 shows the pressures of the two pistons during testing. Clearly, the sealing pressure of the standard piston declined rapidly before the leakage, but that of the bionic piston decreased very slowly. After the leakage, the reading on the pressure gauge in the standard piston declined to 0 MPa within very short time, but that of the bionic piston decreased much more slowly.

The bionic striped piston with the highest sealing performance (h = 2 mm, α = 90°) was selected for the sealing mechanism analysis and named as the bionic piston. The 3D point cloud data of standard piston were acquired by using a three-dimensional laser scanning system (UNIscan, Creaform Inc., Canada). Then, the standard piston model was established by the reverse engineering technique. The striped structure of the bionic piston was modeled on basis of the standard piston.4.1.1. Contact Pressure of Piston Surface

The standard piston and the bionic piston were numerically simulated using the academic version of ANSYS® Workbench V17.0. Hexahedral mesh generation method was used to divide the grid, and the size of grids was set as 2.5 mm. The piston grid division is shown in Figure 8, and the grid nodes and elements are shown in Table 3. The piston cup was made of rubber, which was a hyperelastic material. A two-parameter Mooney–Rivlin model was selected, with C10 = 2.5 MPa, C01 = 0.625 MPa, D1 = 0.3 MPa−1, and density = 1120 kg/m3 [32, 33]. The loads and contact conditions related to the piston of the mud pump were set. The surface pressure of the piston cup was set as 1.5 MPa, and the displacement of the piston along the axial direction was set as 30 mm. The two end faces of the cylinder liner were set as “fixed support,” and the piston and cylinder liner were under the frictional interfacial contact, with the friction coefficient of 0.2.

To better validate the sealing mechanism of the bionic striped pistons, a piston’s performance testing platform was independently built and the sealed contact of the pistons was observed. A transparent toughened glass cylinder liner was designed and machined. The inner diameter and the assembly dimensions of the cylinder liner were set according to the standard BW-160 mud pump cylinder liners. The sealing contact surfaces of the pistons were observed and recorded using a video recorder camera.

(1)The bionic striped structure significantly enhanced the sealing performance of the mud pump pistons. The stripe depth and the angle between the stripes and the piston were two important factors affecting the sealing performance of the BW-160 mud pump pistons. The sealing performance was enhanced the most when the stripe depth was 2 mm and the angle was 90°.(2)The bionic striped structure can effectively enhance the contact pressure at the piston lips, enlarge the mutual extrusion between the piston and the cylinder liner, reduce the damage to the piston and cylinder liner caused by the repeated movement of sands, and alleviate the abrasion of abrasive grains between the piston and the cylinder liner, thereby largely improving the sealing performance.(3)The bionic striped structure significantly intercepted the leaked liquid, reduced the leakage rate of pistons, and effectively stored the leaked liquid, thereby reducing leakage and improving the sealing performance.(4)The bionic striped structure led to deformation of the piston, enlarged the width and area of the sealed contact, the stored lubricating oils, and formed uniform oil films after repeated movement, which improved the lubrication conditions and the sealing performance.

The bionic striped structure can improve the sealing performance and prolong the service life of pistons. We would study the pump resistance in order to investigate whether the bionic striped structure could decrease the wear of the piston surface.

Mud pump, refers to the drilling process to the drilling mud or water and other washing liquid machinery. The main components are volute, impeller, pump seat, pump case, support cylinder, motor seat, motor and other components. Impeller nut is cast iron, so corrosion resistance is good, and convenient processing technology. Pump seat is equipped with four skeleton oil seal and shaft sleeve, prevent shaft wear, prolong the service life of the shaft.

ATO offers high quality vertical mud pumps with thick, solid shaft and copper motor. Various models are available, such as 2 inch mud pump, 3 inch mud pump, 4 inch mud pump and 6 inch mud pump.

Vertical mud pump is used as suction and pouring of river mud, suitable for oil refining, construction, printing and dyeing, chemical industry and other industries.

We, Qingdao Hongbo Petroleum Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:

Qingdao Hongbo Petroleum Machinery Co., Ltd. (HB) specializes in manufacturing and developingmud pump fluid end expendables for customers worldwide. HB’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, HB’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, andhave been accepted domestically and internationally.

As one of HB’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. HB’s established Quality Control System and experienced expertise ensurethe best product quality and service.

Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..

Qingdao Hongbo Petroleum Machinery Co., Ltd. (HB) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. HB’s products have equivalent quality with those of OEM and are produced for direct replacement for brand mud pumps including but not limited to EMSCO, Gardner-Denver, National, Oilwell, IDECO, Skytop Brewster, OPI, Wirth and Wilson. With a large range of specifications, HB’s high quality products have been successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

As one of HB’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. HB’s established Quality Control System and experienced expertise ensure the best product quality and service.

Hy-chrome Mud Pump Liner (Bimetal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3-web or 4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and

Fabric Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Upper and Lower valve Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, etc..

This is Isacc of China Qingdao HNA Oilfield Machinery Co., Ltd. We are a large drilling tools, mud pump and Fluid End Expendables and mud pump spare parts manufacturer in China.

Our plants are specialized in producing wide range of replacement parts and liners, Pistons, Valve and seats for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, Oillwell, OPI Skytop, etc. and other brand liners. All items are manufactured to API 7K quality standards.etc.

And we make cranskshaft, pinion shaft, crosshead assy for EMSCO F series mud pumps, GARDNER DENVER PZ-9, NATIONAL OILWELL 9-P-100, 10-P130 and 12-P-160 mud pumps.

Our F1000 mud pumps have good market in Canada, Mexico, Thailand and Middle East. And our mud pumps have approved by mud pump and insurance industry in Canada.

2. We can save your cost. Because Base on the advantage of China land & human resource cost, via advanced technology being introduced into and absorbed, we improve our manufacturing level and product quality. Parts of products with its high cost performance are stepping in instead of same products from overseas companies.

We specialize in triplex mud pumps and triplex mud pump parts and accessories. If need a quality triplex mud pump or accessory at competitive prices, contact us.

Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.

Our plants are specialized in producing wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners.

We, Dezhou Jiatong Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:

Dezhou Jiatong Machinery Co., Ltd. (JT) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. JT’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, JT’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

As one of JT’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. JT’s established Quality Control System and experienced expertise ensure the best product quality and service.

Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..

Our company is one of the leading designers and manufacturers of triplex mud pumps and fluid end expendables of oilfield drilling machinery, offering top quality and competitive products for our clients all over the world. We adopt ISO9001 quality system and our products meet the API standard.

We have been engaged in manufacturing series of quality mud pumps and spare parts for oilfield machinery since early 1990s. The main products are sold to USA, Mid-Asia, Canada, Mexico, Middle East and Russia. The mud pumps are used in oil drilling and mining. We can supply series of mud pumps( like f-500, f-800, f-1000, f-1300, f-1600 and PZ series )and a full line of fluid end expendables for popular mud pumps in the world, including continental Emsco, National, Gardener Denver,Oilwell,Ideco,Wheatly,Wilson,Wirth,OPI,EllisWillianms,Skytop/Brewster, etc.

We currently manufacture over 2000 major products such as valves & seats, modules, gaskets, plates, crosshead and crosshead guide, hydraulic seat puller, snap rings & valve rings, hy-chrome liners, chrome-plated liners, hardened steel liner, piston hubs, piston & piston rubbers, piston rods and extension rods, cylinder heads & valve covers, drilling tools and other expendables. In fact, as a leading oilfield machinery company, we have revolutionized the triplex premium chromium liners and our patent hp liners have dominated the market with Chinese patent no.: zl03269409.1 since late 1990s. We guarantee that our parts are completely interchangeable with those offered by OEMs with no modification of existing equipment. The warranty extended by Hainuoao(HNA) meets or exceeds the warranties offered by the OEMs.

As one of the leading manufacturers, with 150,000 square feet manufacturing area, our mission is to supply drilling contractors quality products at competitive prices with responsive services.

We, Dezhou Jiatong Machinery Co., Ltd. are a manufacturer of mud pump and expendables of mud pump in oil drilling fields. We hope we can have a sincere cooperation with your good company as a supplier of your good company. We are sure that our products with high quality & competitive prices will lead your company to having a large margin in future bids & lowering your costs very much. Please read our company profile as following:

Dezhou Jiatong Machinery Co., Ltd. (JT) specializes in manufacturing and developing mud pump fluid end expendables for customers worldwide. JT’s products have equivalent qualitywith those of OEM and are produced for direct replacement for brand mud pumps including but not limited to Emsco, Gardner-Denver, National,Oilwell, Ideco, Skytop/Brewster, OPI, Wirth, Wilson, and Gaso. With a large range of specifications, JT’s high quality products have successfully proven themselves under various drilling conditions such as extreme pressure, high temperature and corrosive environments, and have been accepted domestically and internationally.

As one of JT’s business principals, we treat product quality as our first priority. Our employees are well trained and have more than ten years of experience in manufacturing fluid-end fittings for mud pumps. We control the product quality by strictly follow the standard of API-7K. JT’s established Quality Control System and experienced expertise ensure the best product quality and service.

Hy-chrome Mud Pump Liner (Double-metal liner); Chrome-plated Liner (Single-metal liner); Hardened Steel Liner (Single-metal liner); 3/4-web Valve and Seat; Full-open Valve and Seat (KQ/G2/FO); Valve Spring; Long-life Bonded Piston with Rubbers and Fabric;Long-life Bonded Piston with Urethane; Replacement Piston; Piston Hub; Piston Rod; Plate; Snap Ring; Crosshead; Upper and Lower Crosshead; Guide; Extension Rod; Piston Rod Clamp; Threaded Ring; Liner End Cover; Valve Pot Cover; Valve Guide; Cylinder Head; Cylinder Head Plug; Cap; Liner Seal; Valve Cover Gasket; Cylinder Head Gasket; Module (Fluid ends); Ceramic Liner, Rotary Table, Swivel, Hook, Well Head Equipment, drill pipe, drill casing, traveling blooks,F-500/800/1000/1300, PZ-9, 3NB-500/8001000/1300, 12-P-160, W-440 mud pump and 3/5 plunger pumps which are made in China, etc..

We,Dezhou Jiatong Machinery Co., Ltd have been engaged in manufacturing and dealing in mud pump and related fittings in oil drilling fields ---------High frequency quenching liners and modules and so on. Most of our products are exported, and we have the power of self-supporting import and export.Our company’ s products design is fit for worldwide brand mud pumps, such as: Emsco, Gardner-Denver, National, Oilwell, Ideco, Skytop／Brewster, OPI, Wirth, Wilson, Gaso and so on. Our company owns lots of large-scale advanced equipment. Both Liners’ quenching technique and heat treatment technique are in the leading place in China. Every year we produce and sell about 10000 liners of various kinds in different sizes . Products meet the criteria and rule of API totally. Part of our products are produced directly for mud pump producers who are famous worldwide. The product is widely approved by the user communities in American, Canadian, Mexican, the Middle East, the Australian market for its fine quality and the best service。Our company mainly produces and sells the following products:

Also, we produce custom-made valves, seats, liners and other mud pump parts. Customs can choose needed products by yourselves, and we can help you choose suitable products if you provide us with mud pump models and practical drilling conditions in detail. We have specialists of our products serve for the customer track. What’ more, we may defer to the blueprint or the sample customers provide and carry on processing. Jiatong’ s staff whole-heartedly welcome customers everywhere to exchange cooperation with us.

Zibo Huachuang Fine Ceramics Co., Ltd.- is a new & hi-tech ceramic enterprise that specializes in manufacturing of ceramic sleeves and pistons of mud/oil pump with the excellent performances, such as wearing-resistance, erosion-resistance, high-temperature-resistance, high-strength, high-hardness in the working conditions on which metal and polymer ones can not do. They are widely used in MUD PUMP in the fields of petroleum, such as NATIONAL, OILWELL, IDECO, EMSCO, GARDNER-DENVER,FMC etc.

Our Company (Kerui Petroleum Equipment Co., Ltd) specializes in manufacturing and supplying various kinds of API and ISO certified drilling/workover rigs including mobile drilling/workover rigs, skid-mounted land drilling rig.Our drilling rigs can drill depth from 3,280 ft to 30,000 ft. We can also manufacture and supply API certified tubulars such as DP, DC, casings, tubings etc.

HNA is a comprehensive machinery manufacturer, whose products cover petroleum machinery & equipment, drilling & production tools and accessories. It has sound manufacturing facilities, advanced technology, perfect measuring and testing devices.

HNA is specialized in producing mud pumps and wide range of replacement parts and liners for brand name mud pumps, including Emsco, National, Ideco, Gardner Denver, etc. and other brand liners. All items are manufactured to API 7K quality standards.

Our Products are designed to fit mud pumps of Emsco, Gardner- Denver, National, Oilwell, Ideco, Skytop/Brewester, as well as OPI, Wirth, Wilson and Gaso. Our products include Liners: Hy- chrome Mud Pump Liner, chrome-plated Liner, Hardened Steel Liner Valve and seat: Premium Cross Arms Valve and seat, Full open Valve and seat, Valve Spring Piston and piston rods; Long-life Bonded Piston with Rubber and Fabric, Long-Life bonded Piston with Urethane, Replacement Piston, Piston Hub, Piston Rod, Plate, Snap Ring Other parts: Crosshead, Upper and Lower Crosshead Guide, Extension Rod, Piston Rod Clamp, Threaded Ring, Linder End Cover, Valve Pot Cover, Valve Guide, Cylinder Head, Cylinder Head Plug, Cap, Linder Seal, Valve Cover Gasket, Cylinder Head Gasket and etc. Mud pumps: We can offer the F-650,F-800,F-1000,F-1300,F-1600 and PZ-9 mud pump.

We"re Dezhou Rundong Petroleum Machinery Co., Ltd., specializing in mud pump, fluid end. Our products mainly include valve seat and body, valve assembly, liners, piston, piston rod and other mud pump parts.