fd 1600 mud pump parts in stock

Mud pump liner is an important and easily worn part of the mud pump fluid end, so the service life of mud pump liner directly affects the service life of the mud pump. The liner must not only have sufficient strength and rigidity but also must be resistant to high temperature, corrosion, and wear.

Hy-Chrome liner is one of the mud pump fluid end parts used most widely and largest at currently. Our production Hy-Chrome liner is a combination of hot forging high wear coat and the advantages of high chrome wear-resisting corrosion inner sleeve. The outer sleeve is made of quality carbon steel hot-pressing time forming, an inner sleeve made from high chromium cast iron centrifugal casting. And the tensile strength of the outer sleeve is higher than 900000 psi, the hardness of the inner sleeve after heat treatment is greater than HRC62 and can bear the mud pressure of 7000 psi, it"s surface smooth as a mirror, inner hole size tolerance strictly, the normal service life is up to 800 hours.

We have marketing teams in regions where key accounts located, also we prepare a special stock area in the local warehouses for key accounts, to timely provide necessary parts and consumable products. Problem solving & Complaints settlement

We have marketing teams in regions where key accounts located, also we prepare a special stock area in the local warehouses for key accounts, to timely provide necessary parts and consumable products. Problem solving & Complaints settlement

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

The time depends on the MOQ of the order. The delivery time for parts is generally 1-3 days, and equipment is 7-30 days. In addition, contact us to get the full time of the order.

A mud pump (sometimes referred to as a mud drilling pump or drilling mud pump), is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi or 52,000 kPa) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling and manufactured according to API specification 7K.

The advantages of the drilling mud pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameter of pump liners and pistons.

As an important equipment for oilfield drilling operation, a drilling mud pump delivers circulating high-pressure drilling fluid or drilling mud to the bottom of the oil well, flushes the bottom of the well, breaks the rock, cools, lubricates and clean the drill bit, and carries the cuttings back to the ground.

The drilling mud is also used to suspend and carry out drill cuttings from the drill bits as it is brought in and out of the hole. This ensures that the drill bit does not clog and overheat, and makes the entire drilling operation smooth and safe.

Rotational power is supplied to the mud pump through an external power source like a diesel engine or electric motor. The power end of the mud pump converts the rotational energy through a crankshaft to a reciprocating motion of pistons.

The pistons move back and forth in mud pump liners, exerting a force on the cylinder chamber. During the retraction of the piston, valves open to allow the fluid to be drawn into the cylinder. Once the piston has fully retracted, it is pushed back into the cylinder.

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

We know that cost savings on identical spare parts is important for offshore rig Companies today. Therefore we provide our services and spare parts at considerable cost reductions compared to sourcing from the major OEMs. Tratec can guarantee identical parts with all required part certificates. We maintaing the highest quality, using state-of-the art service facilities and experienced, specialist mud pump engineers for service work.

Tratec has supplied more than 20 mud pump spare part, overhaul and recertification projects the last 5 years. References include rig companies Odfjell Drilling, Maersk Drilling, Archer, Saipem, KCA Deutag, and others.

Tratec is an experienced specialist supplier of overhaul, SPS, parts and service for rig and drilling equipment. We can provide Norwegian quality and decades of experience, while maintaning sensible prices and flexible solutions.

Tratec have delivered solid cost savings to our customers. This is due to our lower cost base, system with access to identical parts directly from manufacturer, and utilizing our experienced drilling equipment employees at very competitive rates.

Tratec can supply overhaul and parts compatible with the following Mud Pump makers and trademarks: National Oilwell Varco (NOV), MHWirth, Continental Emsco, Gardner Denver, Lewco, Drillmec, and others. Tratec is an independent supplier of drilling equipment parts. Tratec is neither a licensee, nor is affiliated with any of the named original equipment manufacturers (OEM). The manufacturer’s names, equipment names, or trademarks used herein are solely for identification purposes, and are not intended by Tratec to cause confusion as to the source, sponsorship, or quality of the parts supplied by Tratec. The original equipment manufacturers named above and throughout this website do not sponsor, promote, warranty or endorse Tratec’s supply of parts.

For maximum performance and durability, our modules are made from individually forged, heat-treated alloy steel and feature an API 7 valve assembly for improved flow. Our L-shaped design features bore-seal technology for improved seal performance in higher pressures and is compatible with numerous “F-Series” drilling pumps including Honghua®, Bomco® Rongsheng®, Workforce® and other similar designs.

Increase is a quality trading company of replacement parts for the wide variety of mud pumps, centrifugal pumps, rig parts, and swivel parts found on the World market today. Over a 1,000,000 of interchangeable mud pump parts, centrifugal pump parts, rig parts and swivel parts in stock for all major manufactures such as: mud pump spares and the mud pump spare parts / mud pump replacement parts that we offer. These parts include; mud pump liners, mud pump pistons, triplex signal action pistons, piston rods and clamps, pony rods, threaded rings and caps, valve guides, liner packing cage assemblies, duplex pump spares and duplex mud pump parts, triplex pump spares and triplex mud pump , piston rods, gland brass and junk rings, full open valves and valve seats, web valves and web valve seats, stuffing box and gland nut, and mud pup gasket and mud pump rubbers.

Web Valves and Web Valve Seats, Full Open Valves and Valve Seats, Gardner Denver Lower Valve Guide, Ideco MM-700 Duplex Piston Rod, Ideco T-800 Pony Rod, Triplex Pump Piston Rod & Clamp, Continental Emsco F-1000 Threaded Ring and Cap, Duplex Pump Liner Packing Cage Assembly, Gland Brass and Junk Rings, Continental Emsco DB-550 Stuffing Box and Gland Nut, Pump Gasket and Rubber Products, Fluid End Studs & Nuts, Triplex Single Action Piston, Fail Safe Piston, and Duplex Pistons.

National Mud PumpsC-150 | C-250 | C-350 | E-500 | E-700 | G-700 | G-1000 National Mud PumpsK-280 | K-380 | K-500 | K-500A | K-700A National Mud Pumps7P-50 | 8P-80 | 9P-100 | 10P-130 | 12P-160 Oilwell Mud Pumps6P-HD | 610-P | 212-P | 214-P | 218-P Oilwell Mud Pumps350-PT | 560-PT | A-560-PT | 850-PT | A-850-PT | 1100-PT Oilwell Mud PumpsA-1100-PT | 1400-PT | A-1400-PT | 1700-PT | A-1700-PT OPI Mud Pumps350-D | 00-DL | 700-HDL | 1000-HDL