mud pump in drilling rig for sale

The Baoji/Bomco F1000 Triplex mud pump has a max. working pressure of 5,000PSI and a 6-3/4" liner size. This model is the first choice for the medium and deep dr... More Info

The Baoji/Bomco F1600HL Triplex mud pump has a max. working pressure of 7,5000PSI and a displacement of 46.5L/S with 6" liner size. This model is the f... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Emsco/Bomco 1600 Mud Pump, Unitized 1600 Mud Pump Powered by Two GE 752 Motors Charging Pump, Liner Flush Pump, Relief Valve, Mud Gauge, Etc. ....Call For Price More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - 1 - Rebuilt Gardner Denver PZ-9 Mud Pump Package, New Caterpillar C-27, 1050 HP diesel engine. Belt-driven. comes with pulsation dampener, discharge block, precharge, li... More Info

Mud Pumps - 1 of 3 used Gardner Denver PZ-8 triplex mud pumps. This would be a good rebuildable core. We also have new, rebuilt and good used pumps and packages available for sale ... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Preferred Pump offers the best rewards program in the water well equipment industry. Check out our social media pictures to see what you"ve been missing!

If you are supplying pump supplies, you can find the most favorable prices at Alibaba.com. Whether you will be working with piston type or diaphragm type systems, reciprocating or centrifugal, Alibaba.com has everything you need. You can also shop for different sizes drilling mud pump price wholesale for your metering applications. If you operate a construction site, then you could need to find some concrete pump solutions that you can find at affordable rates at Alibaba.com. Visit the platform and browse through the collection of submersible and inline pump system, among other replaceable models.

A drilling mud pump price comes in different makes and sizes, and you buy the tool depending on the application. The pump used by a filling station is not the one you use to fill up your tanks. There are high flow rate low pressure systems used to transfer fluids axially. On the other hand, you can go with radial ones dealing with a low flow rate and high-pressure fluid. The mixed flow pump variety combines radial and axial transfer mechanisms and works with medium flow and pressure fluids. Depending on what it will be pumping, you can then choose the drilling mud pump price of choice from the collection at Alibaba.com.

Alibaba.com has been an excellent wholesale supplier of drilling mud pump price for years. The supply consists of a vast number of brands to choose from, comes in different sizes, operations, and power sources. You can get a pump for residential and large commercial applications from the collection. Whether you want a water pump for your home, or run a repair and maintenance business, and need a supply of dr drill mud pump prices, you can find the product you want from the vast collection at Alibaba.com.ther it is for refrigeration, air conditioning, transfer, or a simple car wash business, anything you want, Alibaba.com has it.

Welcome to Pickett Oilfield’s mud pumps web page. Our company has been in the oil & gas drilling equipment industry for over 38 years, supplying new and used mud pumps and mud pump parts to customers in practically every producing region in the world. We are here to serve all your drilling equipment needs – if you don’t see it on this site, just give us a call or email. We can get it, if you need it!

Pickett Oilfield, LLC offers prospective buyers and extensive selection of quality new and used oil & gas drilling equipment, including mud pumps and parts to choose from at competitive prices. Browse our inventory of mud pumps and mud pump parts for sale at competitive rates.For more information or to request a quote, please Contact Us at 936-336-5154 or email to Sales@PickettOilfield.com.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Bentec completely redeveloped the concept of Mud Pumps. Being equipped with a direct-driven gearbox, an own developed motor, and a state-of-the-art pump housing, there is no need for an internal gear coming with many disadvantages and no more belt tensioning.

Bentec Mud Pumps are light weight and have a small footprint. The AC-powered motor is top or rear mounted – suitable for any drilling rig arrangement. The pump is available with 5 000 or 7 500 psi fluid ends, and all its parts that are subject to wear and tear meet API standards and are available worldwide.

A handling crane makes it easy to handle the fluid end components. Furthermore, Bentec uses a patented liner and valve clamping technology to reduce the maintenance time significantly. A quick-change liner and piston system serves for easy maintenance. A special feature of the Bentec MUD PUMP is the side-mounted gear drive.

This design eliminates the need for chain or belt tensioning systems. The two-stage helical gear feeds directly into a forged/welded crankshaft, which is balanced and provides quiet and vibration-reduced operation.

Liner cooling and gear oiler systems are included; a supercharge pump and a noise reduction package can be installed upon request. The Bentec MUD PUMP is the right choice especially when it comes to noise-sensitive environments such offshore or densely populated environments.

Beyond the supply of Mud Pumps, Bentec acts as system supplier. The pumps can be delivered together with a Bentec Power Control System and a Bentec Soft Pump System.

Bentec completely redeveloped the concept of Mud Pumps. Being equipped with a direct-driven gearbox, an own developed motor, and a state-of-the-art pump housing, there is no need for an internal gear coming with many disadvantages and no more belt tensioning.

Bentec Mud Pumps are light weight and have a small footprint. The AC-powered motor is top or rear mounted – suitable for any drilling rig arrangement. The pump is available with 5 000 or 7 500 psi fluid ends, and all its parts that are subject to wear and tear meet API standards and are available worldwide.

A handling crane makes it easy to handle the fluid end components. Furthermore, Bentec uses a patented liner and valve clamping technology to reduce the maintenance time significantly. A quick-change liner and piston system serves for easy maintenance. A special feature of the Bentec MUD PUMP is the side-mounted gear drive.

This design eliminates the need for chain or belt tensioning systems. The two-stage helical gear feeds directly into a forged/welded crankshaft, which is balanced and provides quiet and vibration-reduced operation.

Liner cooling and gear oiler systems are included; a supercharge pump and a noise reduction package can be installed upon request. The Bentec MUD PUMP is the right choice especially when it comes to noise-sensitive environments such offshore or densely populated environments.

Beyond the supply of Mud Pumps, Bentec acts as system supplier. The pumps can be delivered together with a Bentec Power Control System and a Bentec Soft Pump System.

The effectiveness of triplex mud pumps for sale determines the success of drilling operations in rigs. Circulation of the drilling fluid or mud is a continuous process that calls for uninterrupted operations of the mud pumps. Finicky about how our equipment work, we at ShalePumps, go to extreme lengths before engineering modern beasts for continuous drilling operations in rigs.

Our state of the art Houston facility develops high performing mud pumps for drillings rigs by a combination of the best materials, and structural dynamics to put together some of the best equipment. Designed to be adapted for various drilling applications in rigs through designs that incorporate various liner sizes, the triplex mud pumps for sale that leave the assembly line at ShalePumps are mean and mighty workhorses. The triplex mud pumps feature high performance steel power ends, balanced forged steel crankshaft, steel herringbone gears and anti-friction roller bearings. Striking the right balance between weight and performance, the triplex mud pumps for sale we make are best for drilling operations in rigs.

The triplex mud pumps manufactured at ShalePumps have extended continuous duty cycles, and foolproof lubrication systems for smooth drilling operations in rigs. With mud pumps from ShalePumps the drilling operations in rigs will never be the weak link, but a pivot that spells success.

ShalePumps, LLC is proud to introduce the SP-1614 1600 HP Continuous Duty Triplex Drilling Pump. Engineering and rated for 1600 horse power at 110 strokes per minute with a 14” stroke capable of 7500 PSI. Manufactured in our Houston Texas facility, this pump defines longevity, quality and capability. The SP-1614 is designed to incorporate minimum weight and maximum performance using a high performance steel power end, a balanced forged steel crank shaft, steel herringbone gears and anti friction roller bearing throughout. Multiple liner sizes are available to allow variance in pressure and output volume for a variety of drilling applications. Download the performance chart for more detailed information.

You can find our high-performance mud pumps at some of the largest oil and natural gas drilling operations on the planet. Now, we’re ready to supply one of our mud pumps to you.

Looking for a mud pump for sale? Bridges Equipment has the biggest inventory of rebuilt duplex and triplex mud pumps and pump packages ready to ship. Unlike some suppliers, we completely rebuild our mud pumps to OEM standards and guarantee our work from 90 days up to six months against major failure.

Our fabrication facility customizes mud pumps, equipment, and pump packages to meet the needs of operations large and small, across the nation and around the world. Whether you need a custom-fabricated mud pit or a unitized pump package, we have the expertise to get it done.

Nothing wastes time and money like waiting on parts. With two supply stores stocked with the fluid ends and other mud pump parts you need to keep your operation running, and the field mechanics to install them, we can help keep your operation up and running.

Customizability. Functionality. Quality. Reliability. You’ll find these attributes and more in every mud pump, mud pump part or mud pump package we have available for sale or rental.

We, at Waters, provide high-standard, quality built mud pumps and its parts for oil and gas drilling operations on sale! We provide both sparingly used mud pumps and its parts to our customers in Houston and other areas in the United States.

In a tight market, leasing or renting rig equipment is the smart move. Waters International offers its customers a wide range of leasing and rental programs that can significantly reduce capital costs and accelerate ROI

The drop-down menu at the top lists the items we usually have in-stock. All of them are also normally available for sale or for rent. Rental products also include additional systems such as Triplex Mud Pumps (Diesel or Electric), Mud Tanks and Solids Control Equipment. For fast and easy equipment request, we have provided online forms customized to each specific area of interest. The photos below illustrate just a few of the items available in our inventory.

The mud pump is an integral part of drilling operations. Also called mud drilling pump, it is a kind of plunger pump or a reciprocating piston, which circulates the drilling fluid through the drill string and back up the annulus. The operation takes place under very high pressure of about 7,500 psi or 52,000 kPa.

Waters provide mud pumps of varying configurations and sizes according to our customer’s requirements. Every oil rig requires a different kind of mud pumps and parts. That is why, at Waters, we offer customized mud pumps according to your requirements. Be it the triplex or three-piston pump for the petroleum rig or the duplex mud pumps, we have with us a wide range of products to satisfy your oil rig specifications.

A mud pump is pivotal to rig drilling operations and at Watersintl, we attach great importance to the quality, make and build of every drilling rig mud pump that we offer for rental. With competition causing margins to shrink, the way to financial and operational success is mud pump rental.Operational efficiency is the key to success and a mud pump can actually be the single biggest contributor to drilling operations. With a lot riding on the capacity and rugged build of a mud pump, a rental is definitely a better choice.

We, at Waters, believe in quality over quantity. For the past five decades, we have gathered enough inputs and experiences to ensure our clients go satisfied after the purchase of our mud pumps and parts.

We, therefore, offer a comprehensive price range on our mud pumps for drilling in Houston. We have both sparingly used and new mud pumps to suit our customers’ requirements. Whatever your budget is, we will provide you the best choice in mud pumps and promise to deliver quality products at an affordable price range.

We know how difficult it is to find that one perfect part or the whole mud pump to fit in your drilling operations. That is why; we keep minimum delivery time to ensure our customers do not suffer downtime.

If you are looking for a mud pump, we would be happy to help! Just call us with your requirements or talk to our experts to know more about our mud pumps and other products!

At Watersintl, our specialization in equipment for drilling, lends us with greater exposure on the all- important mud pump, permitting us to offer the best models. Choose from a wide range of models that feature on our list of equipment available for rental. Benefit from our technical expertise that improves the operational efficiency and reliability of every single mud pump we offer on rent. The inspection routines and servicing that we follow transforms every mud pump into a rugged workhorse that will help you improve operational ability. Browse through our extensive list of drilling equipment and benefit from qualitative superiority and our reputation as one of the very best in the industry.

INGERSOLL RAND RO-300(Ref#2450N) Manufactured 1983, PTO, mounted on 1981 International Paystar 5000 with Detroit 8V92T engine, 650/250 air compressor, 5 ½ x 8 mud pump, 8 ½" retractable table, 3" x 28" Kelly, hydraulic pulldown, mechanical clutches, breakout wrench, 4 hydraulic leveling jacks, hydraulic valve problem in rear, mast does not move, rig does not start, truck does not run  Price:  $35,000

INGERSOLL RAND RO-300 DRILL RIGS(Ref#1555Ta)  Detroit V8 engine, 11 speed transmission, 5 x 10 Gaso hydraulic mud pump, 42’ mast, 8-1/2” retractable table, 4-1/2” x 25’ fluted round kelly, hydraulic drive winch, mounted on 1980 International, 4 hyd jacks Price:  $137,500

INGERSOLL RAND RO-300 DRILL RIG(Ref#1555Tb)  Detroit V8 engine, 11 speed transmission, (2) 5 x 6 Gardner Denver hydraulic driven pumps, 8-1/2” retractable table, 42’ mast, hyd driven double drum winch, w/ram driven kelly, 5-1/2” x 25’ kelly, mounted on 1981 International Paystar truck, 4 hyd jacks  Price:  $137,500

CYCLONE RO-300(Ref#10000R)  Manufactured 1970, 330 Ford porpane deck engine, 5-1/4" table, 3 x 4 centrfigual pump, mounted on 1973 Mack truck with 237 Cummins engine, 30" mast, sandline, no hyd pulldown, has not run in several years, good for parts or rebuilding  Price:  $36,500

CYCLONE RO-300(Ref#1859N)  Manufactured 1975, 8" retractable table, 23-1/2" fluted kelly, mast for Range 2 casing, 8V71 Detroit engine, 600/150 LeRoi air compressor,mounted on 1975 Ford F950 tandem axle truck with Cummins diesel engine  Price:  $45,000

CYCLONE 300 DRILL RIG(Ref#8929T)  3 x 4 centrifugal mud pump, Leroi piston compressor (needs work), mounted on 1999 Ford Sterling tandem axle truck with diesel engine, PTO, rod box, 4 hydraulic leveling jacks, 100’ of 3-1/2” x 20’ drill pipe  Price:  $62,500

CYCLONE 300 DRILL RIG(Ref#373T)  Manufactured 1973, 871 Detroit diesel on deck, 450 cfm Bendix Westinghouse air compressor, no mud pumps but hydraulics are there, 4” kelly, 8” retractable table, bailing line, mounted on 1972 Ford F900 tandem axle truck with 434 gas engine, 3 hydraulic jacks, 200’ of 4-1/2” x 15’ drill pipe, sitting since 2019  Price:  $37,500

CYCLONE 300(Ref#5693R) Manufactured mid 1970"s, Ford 300 industrial deck engine, mounted on 1985 Ford 600 (not 4x4) with 429 gas engine, 4 x 3 Mission mud pump, Leroi developmental air compressor, 5 ¼" retractable table, 3-1/2" x 19" Kelly, hydraulic pulldown, mechanical clutches, 300 gallon mud pit with mixer & hoses, breakout wrench, rod box, 200" of 2 3/8" IF x 15" drill pipe, bits & subs, 3 hydraulic leveling jacks, ready to go    PRICE:  $45,000

CYCLONE 44R(Ref#1509), Manufactured 1970 - combination mud rotary and cable rig,  Ford 6 cylinder gasoline engine on deck, 5 x 6 GD duplex mud pump, 34" mast, 3 hydraulic leveling jacks,  Mounted on tandem axle truck, Diamond Reo powered by Cummins 220 diesel engine,  3" x 24" kelly, 2-3/8" x 20" drill pipe, 13"H x 8"W x 34"L, handling equipment, table bushings, tools  Price:$45,000

CYCLONE 43R COMBINATION CABLE/KELLY(Ref#4485)  12" x 600" capacity, Mounted on tandem axle Mack truck, 4 x 5 GD mud pump, 38" mast, 6 cyl gas Ford 300 engine runs drawworks and pump, Large rotary table, hydraulic leveling jacks  Price to be determined

CYCLONE 42R ROTARY/CABLE COMBINATION RIG(Ref#5173N)  Ford Industrial gas deck engine, mounted on 1972 Kaiser 6 x 6 truck with 6 cyl Turbo diesel engine, (both engines rebuilt), 5" stationary table, 4" x 12" square kelly, King swivel, portable mud pit, 5" and 6" tools, no mud or air, no leveling jacks, no pipe  Price:  $45,000

SANDERSON CYCLONE 36R COMBINATION ROTARY/SPUDDER RIG(Ref#11403Tb)  4 cylinder Ford diesel engine on deck, 38" hydraulically raised mast, 5-1/2" table retractable to 18" x 12" deep, 3-1/2" x 20" fluted Kelly, drill line drum, sandline drum and casing drum (no line on rig).  2-part block, shock in the crown for cable drilling,  Mounted on 1992 Ford L7000 all-wheel drive truck with 6 cyl Ford diesel engine, automatic transmission with big hydraulic pump, low miles, 3 hydraulic leveling jacks, needs new hoses and swivel, no rod box.  Price:  $32,500 – Oklahoma

SANDERSON CYCLONE(Ref#15013T)  4 cyl Red Seal Continental gas deck engine, 2 line machine, shortened mast, mounted on 2-1/2 ton Military truck with gas engine, no jacks, currently drilling, well maintained and ready to work POR

CYCLONE 36R COMBINATION CABLE TOOL/KELLY PARTS RIG(Ref#3999N)  Manufactured 1981, 4 x 3 Mission, White diesel deck engine, developmental air compressor, 5" retractable table, fluted kelly, Bean water injection pump, mounted on 1981 Ford (not 4x4) with diesel engine, bailing line, sandline, casing line, 4 hydraulic jacks, pulldown, mechanical clutches, truck does not run, sitting over 10 years Price:$14,500 - Michigan

CYCLONE 36 COMBINATION CABLE TOOL/TABLE DRIVE DRILLING RIG(Ref#2328Ta)  Gardner Denver 5 x 6 mud pump with auxiliary engine, 5 cylinder deck engine, mounted on Ford truck with propane engine, retractable table, 1 front and 2 rear hydraulic leveling jacks (hydraulics redone), no rod box, no pipe rack, no drill pipe  Price on Request- Florida

CYCLONE 36R(Ref#3980N) combination cable/Kelly rig, manufactured 1960"s, (2) Ford gas deck engines, mounted on 1987 Freightliner with Cat engine, 3x4 Mission mud pump, 18" Kelly, 5 ¼" retractable table, hydraulic pulldown, mechanical clutches, mud pit, cone desander, 200" of 2 7/8" x 15" drill pipe, breakout wrench, hydraulic leveling jacks, 4" & 6" cable tools  Price:  $47,500

CYCLONE 36R COMBINATION CABLE/TABLE DRIVE DRILL RIG(Ref#7661Tb)  Gardner Denver 5 x 6 mud pump w/4 cyl John Deere engine, no air, 172 Industrial Ford gas deck engine, 5-1/4” retractable table, mounted on GMC tandem axle truck with gas engine, 3 hydraulic leveling jacks, pipe rack, 180’ drill pipe  Price:  $27,500

CYCLONE 36R COMBINATION RIG(Ref#11157)  2 Ford Industrial engines (one runs rig and one runs pump), mounted on 1964 International tandem truck with 220 Cummins, 5-1/2 x 6 Gardner Denver pump, 18" kelly, 5-1/4" retractable table, 2" swivel, 4" spudder tools, 375 gal attached swing-up mud pan, 180" of  Mayhew regular pipe  Price:  47,500

CYCLONE 36R(Ref#9430T)  Currently being rebuilt, 38" extended mast, Cummins 4BT deck engine, new 4 x 3 Mission mud pump, 8-1/2" Franks table, all new hydraulics, currently unmounted with no air compressor  POR

CYCLONE 35R(Ref#6558T)  5" Gardner Denver mud pump with 3 cyl diesel engine, no air, square kelly, retractable table, hydraulic pulldown, pipe rack, 4 cylinder diesel deck engine, mounted on 1985 Mack twin screw with diesel engine, 3 hyd leveling jacks, 300" of 2" x 16" drill pipe  Price:  $64,500

CYCLONE 35R COMBINATION MUD ROTARY CABLE TOOL RIG(Ref#10514T)  Built 1966, 5 x 6 mud pump, developmental air compressor, mounted on 1966 Ford F950 Super Duty with gas engine, (2) gas deck engines (one runs rig, one runs air compressor and mud pump), 240" drill rod, 15" sub and bit  Price:  $29,500

CYCLONE 35R(Ref#483N)  Manufactured 1969, Gardner Denver 3 x 2-1/2" pump (needs new pistons), mounted on 1977 International truck with DT466, 400" of 2-3/8 Mayhew Jr., stabilizers  Price:  $35,000

BUCYRUSERIE 30RT(Ref#13547)  220 Cummins deck engine, mounted on Crane Carrier with Red Diamond 6 cyl gas engine, 5 & 3 speed transmission, tools  Price:  $20,000

BUCYRUS ERIE 10R(Ref#5558Ta)  Manufactured 1974, mounted on 1974 Ford LN8000 with rebuilt Cat 3208, new front tires, no ruse, LeRoi compressor, 5 x 6 Gardner Denver mud pump, injection pump, new 2" plumbing, 8" retractable table, 3 hyd jacks, rod rack, 5 stabilizers 6"-12", 19 rods of 2-7/8", 26 rods of 3-1/2", several bits and subs 4"-10"

2005 FREIGHTLINER WATER TRUCK(Ref#5558Tb)  1000 gal water tank, C7 engine, tandem axle, 18,000# boom with 60" reach, 250 Miller welder and generator, grouter, 018" rack, toolboxes, air brake trailer package, hitch

BUCYRUS ERIE 10R(Ref#11705T)  Manufactured 1973, 5 x 6 Gardner Denver mud pump (new pistons and liners 2016), 50 SDS air compressor, bailing drum, 24’ kelly, 8-1/4” retractable table, hydraulic pulldown, air clutches, mounted on 1989 Chevy Topkick with Cat 3208T, rod box, 300’ of 3” drill stem, tools, well maintained  Price:  $47,500  Additional pipe available at extra cost.

BUCYRUS ERIE 10R(Ref#13653T)  Manufactured 1972, 1500 drawworks, 5 x 6 mud pump, 680 cfm air compressor, 3-5/16" x 23" kelly (also a spare kelly), new stabilizer, breakout wrench, Myers water injection, 30" mast, 7-1/2" retractable table, pipe rack, mounted on 972 Ford L8000 truck with Cat 3208 engine, 3 hyd leveling jacks, 15 jts of 3-1/2" x 15" drill pipe (2-7/8 IF)  Price:  $52,500

BUCYRUS ERIE 10R(Ref#1402Ta)  Midway 1500 drawworks with 16" air cutches, 8-1/2" Midway rotary table operated by 8" twin disc clutch, Pullmaster hydraulic make up cathead, 45" derrick rigged up on 4 lines with King G53A swivel, 39" x 4-1/4" kelly, Detroit 6V71 Detroit deck engine, mounted on 1981 Western Star engine with Big Cam 400 Cummins engine, 10 speed transmission

Includes Gardner Denver FXZ 7-1/4 x 12 mud pump with 61381 Allis Chalmers 450 hp engine, air start, pump drive, belt guard, surge dampener, 500 gallon fuel tank mounted on tandem axle drop deck trailer

BUCYRUS ERIE 10R(Ref#1986Nc) Manufactured 1972, PTO, mounted on 1972 Ford F8000 with Cat 3208 engine, 5x6 piston mud pump, Leroi 50SDS air compressor, 8" retractable table, 5 ¼" table bushing, Myers water injection pump, line oiler, sandline, pipe rack, breakout wrench,  new water swivel, 40000# mast capacity, 16000# pulldown, mud pan, mud mixer, 1 front & 2 rear hydraulic leveling jacks, 270" of 2 7/8" OD x 20" drill pipe, 2 3/8" IF  Price on request

BUCYRUS ERIE 10R(Ref#14627)  Manufactured 1972, mounted on 1972 Ford truck, 300" of 3-1/2" x 15" drill pipe, 5 x 8 mud pump, small LeRoi compressor, rebuilt  Price:  $75,000

BUCYRUS ERIE 10RRef#826N)  Manufactured 1970"s, mounted on International Paystar truck, 3 line machine, Detroit 6V71 engine, PTO, no tools    PRICE:  $65,000

BUCYRUS ERIE 10R(Ref#7203N)  650/250 air compressor, no mud, 6 cyl Detroit on deck, mounted on 1978 Kenworth truck, 8V71 Detroit, water injection, no pipe or tools  Price:  $42,500

BUCYRUS ERIE 10R(Ref#2083N)  Manufactured 1970"s, 450/250 LeRoi air compressor, 6V71 Detroit deck engine, 8-1/2" retractable table, mechanical clutches, hydraulic pulldown, sandline, water injection, 23" kelly,  no pipe rack, no rod box, (15) 4-1/2" FJ x 15" drill rod, 3 hyd leveling jacks, needs new truck   Price:  $30,000

BUCYRUS ERIE 10RH(Ref#1161)  2 available - 500/250 air compressor, 671 Detroit diesel, mounted on Ford 750 tandem axle truck with gas engine, 23" x 4" kelly, parts, 400" of 4" x 20" drill pipe, (1) manufactured 1968 good condition, (1) manufactured 1963 needs work      Price for both:  $34,500

BUCYRUS ERIE 10R(Ref#1847N)  23" fluted kelly, table drive, LeRoi 450/250 air compressor, Mission 4 x 3 pump, mounted on Ford F800 tandem axle truck with gas engine, needs deck engine, hyd pump and rebuilding  Price:  $28,000

BUCYRUS ERIE 10R(Ref#1502N)  (2) 5 x 6 mud pumps, (1) 3 x 4 Mission Magnum centrifugal pump (low hours), mounted on Crane Carrier, Detroit diesel engine, PTO, hydraulic pulldown, mechanical clutches, retractable table, 3-1/2" x 23" kelly, breakout wrench, good condition, currently drilling, 155" of 3-1/2" pipe, 200" of 20" stems  Price:$65,000

Manufactured 1998, 1602 hours, 4" plungers with hydraulic charge pump, Detroit Series 50 (rebuilt), 5 speed, Skid mounted with fuel tank, Rebuilt expendables with seals, valves, seats, packings and gaskets.  Price:  $72,500

Complete without traction motors.  9” bore x 15” stroke, single acting, working pressure up to 7500 psi, (3) interchangeable forged steel fluid end modules with separate suction and discharge sections, Premium grade fluid end expendables with 6-1/2” pistons and liners, suction manifold with (3) 12” flanged inlets, SD8 suction desurger, pressure manifold with (2) 5-1/8” 10,000# API flanged outlets, liner wash system, 1 x 1-1/2” mission centrifugal pump p/b 3 hp electric motor, external power end lubrication pump, steel skid, suction line pressure relief valve, set of standard service tools  Price:  $675,000

CENTERLINE 7-1/2 X 10 MUD PUMP(Ref#14556Tb)  high pressure, no engine, needs retaining liner cage and (1) side suction manifold needs replacing, unmounted  Price:  $39,500

3 available in India. 1600 HP, rated pump speed 140 strokes per minute, maximum fluid cylinder liner bore 6-3/4", stroke 10", 10,000 PSI hydrostatic pressure of standard cylinder. 2.853 ratio of gears. 10" suction connection, 6" discharge connection. Valve pot mod .7., steel fluid ends, 5,000 psi pulsation dampener. Oilfield skid mounted. Performance Data: at 120 strokes per minute with 6-3/4" liners, pump will produce 4305 PSI and 574gpm. Set up for electric power. Dimensions and weight: 84,000 lbs, 209"L x 113"W x 75"H. Built 1976. Located India, removed from offshore drilling rig. Price: $75,000 each

approx. 7000 hours, Cat 3512C (1476 hp), 5000 psi fluid end cylinder, 5-1/2" piston cylinder, antifreeze heaters, WPT W21-CG-300 Type 1 PTO clutch, 16 grooove drive sheave, 16 groove bullwheel, 16 groove Kevlar belt with necessary guards, 5 x 6 x 11 charge pump c/w 50 hp@1200 rpm electric motor.  Discharge plumbing: 2" 5M XXH B/W Oteco gate valve, 4" 5M XXH b/w Oteco gate valve, 3" 5M Oteco popoff valve w/1502 connection, 2" 5M type D Oteco mud gauge with 1502 connection, Hydril 20 gal 5M pulsation damper.  Mounted on oilfield skid with separate, with expendables cabinet, knowledge box and removable engine skid for breaking the engine and pump into separate smaller loads.  Winterization package, oilfield lighting, explosion proof starters for charge pump, rod oiler pump and liner wash pumps.  Price:  $695,000 - Make Offer

Two Available, each complete with Cat 3508 diesel engines, pulsation dampener, and mud tanks with desander, desilter, etc.  Price for Package:  $110,000

Cat 3408 engine air start with pump drive and belt guard, PD55 Hydril dampener, 750 gallon fuel tank, mounted on heavy duty drop deck tandem trailer,  low hours  Price:  $87,500

14" stroke, 2" rod size, 400 hp, 75 strokes per minute, cast fluid ends, unitized on oilfield skid with Cat 3406 diesel engines, air start, new filters, oil and coolant, air receiver on deck, fluorescent lighting, drive belts with air clutch.  Gone over and in good operating condition, ready to be put into service.  Pumps currently have new 6" liners with production being 480 gpm @ 1000 psi.  All fluid end parts are brand new and never used, including the valves, gears, liners, pistons, rods, head gasket, and rod packing, equipped with pulsation dampener.  32" long x 11" wide x 7" high 50,000# weight

Manufactured 1996, new condition of gear and fluid ends, no engine, new 4" liners, new pistons, new chrome rods, new valves, new liner studs in head, new suction flange and gasket, new 2" steel discharge flange  Price:  $13,500

GARDNER DENVER TEE MUD PUMP(Ref#6440T)  New, unused, manufactured 2014, 4 available, bare pumps  Price:  $39,500 each  New Cat C7 engines available at additional cost

Pump only.  5" stroke, 300 hp, steel billet fluid end, 2-3/4" ceramic plungers, Delrim disc valves, 838 packing, 6" RF suction connection, 3" RTJ discharge connection, 231 gpm max, 2020 psi, max 360 rpm  Price:  $82,500

Two available, rebuilt, cast ductile iron fluid ends, used for oil service, bare pumps, no engines, unmounted, one is flanged for suction/discharge, one is threaded  Price:  $20,000 each

Cummins 150 hp reconditioned engine with snap-in clutch, 90 gal diesel tank with lock cap, Dayton oiler pump system and tank, 4” suction hose and winch boom, 4’ back up drill pipe bumper guard, front and rear loading hitches, epoxy primer and enamel paint, 44” bull wheel with power band belt, large belt guard Price: $82,500

5 x 8, drive shaft included, new gears and bearings 2019, new pistons and piston sleeves 2021, new valve rubber inserts and valve cup gaskets 2022, very good condition  Price:  $18,500

Detroit 671 engine with Snap-In clutch (Gen Set approx. 1500 hours),  replaced fluid end parts with 4” liners,  mounted on 8’ x 12’ trailer with adjustable pintle and DOT lighting, 75 gal diesel tank with lock cap, Dayton oiler pump system and tank, 4” suction hose and winch boom, epoxy primer and enamel paint, 44” bull wheel with power band belt, large belt guard, 2’ x 2’ x 5’ lockable HD toolbox, mouting beams and steel/bolts  Price:  $41,500

Air driven, used with cement for grouting wells, sitting 3-4 years, valves will need rebuilding, trailer mounted, air over hydraulic brakes, includes 28 joints of 21’ pipe  Price:  $39,500

8" x 17" base (mud boat), John Deere 145 hp reconditioned engine with WPI snap in clutch, 90 gal diesel tank, Dayton oiler pump system and tank, 4" suction hose and winch boom, 4" backup drill pipe bumper guard, front and rear loading hitches, 42" bull wheel with power band belt, belt guard  Price:  $99,000 PRICE REDUCED:  $73,500

Cat engines, 4 speed transmissions, rigged up with secondary containment, onboard lighting, winterization canvas for cold weather operations, Also available with Cummins or John Deere engines Priced from $77,500 to $97,500

16” stroke, 500 hp, ductile iron fluid end, Cat D353 diesel engine with radiator, 640 hp, 1300 rpm, inline 6 cylinder, 4 stroke, 6-1/4” bore x 8” stroke, (1473 in3) displacement, turbo charged (air to air aftercooled) aspiration, capable of 268 gpm @ 2720 psi with 4-3/4” pistons or 751 gpm @ 970 psi with 7-1/2” pistons.  Price:  $37,500

379 Cat didsel engine, Matco hi pressure forged steel fluid end, quick change valve heads, Hydril dampener, brand new expendables sill in box  Price:  $59,500

3 available, overhauled by National Oilwell (ready in 2-3 weeks after purchase), 1600 hp @ 120 stroke per minute, 12” stroke, 5000 psi, skid mounted, GE Amerimex 752 traction motors, new liners, seats, valves and pistons  Price:  $295,000 each

750 hp, 8" stroke, 6" suction inlet, 4" discharge outlet, piston size 4-1/2" - 7",  max rod load 85,000#, approx. weight 11,500#, lubrication force fed, steel pump power end, double helical gears, 4.95:1 gear ratio, rod bearings sheel type replaceable, main bearings straight roler, pinion bearings spherical roller, crankshaft 1pc forged alloy steel, connecting rod knuckle joint, crosshead guide bronze replaceable, piston type fluid end Monoblock design, from high strength alloy steel, treated and sonic tested, Cat D379 diesel engine, 500 HP max linear bore size 3-1/2 - 6-1/4 x 7-3/4" stroke, test pressure 10,000 psi, gear ratio 2.742.8" suction line to 4 discharge stroke, location South America  Price:  $110,000

Two available, Skidded, Detroit Series 60 diesel engine DDEC V (475 hp), Allison 750 (6-speed) transmission with lock up control pane, Mission 4 x 5 centrifugal suction pump, 4” plungers, pulsation dampener, pressure gauge, safety valve, 10,000 psi fluid end, 5000 psi working pressure, NOV plug valve control manifold (4-valve) configured for 15k operation.  Can be configured to kill wells, acidize, cement, reverse circulate, drill out frac plugs or run in tandem.  Self-contained with fuel and fluid tanks and controls.  Steel canopy over skids, covered battery boxes, new batteries and disconnect switches.  Well maintained and in excellent condition.  Low hours on pumps and motors.  Ready to work.  Price:  $154,500 each

Series 60 Detroit diesel, 14 liter engine w/Allison transmission, mounted on oilfield skid, major overhaul, completely unitized with fuel tank, fluid end rebuilt by Matco  Price:  $195,000

1600 hp, 12" stroke, 5000 psi, pulsation dampeners, pop off pressure release valve, pump pressure gauge, forged discharge manifold, overhead track for chain hoist, mounted on shipping skid, line washer pump, 6" liners, overall size:  192 x 128 x 105-3/4", inspection report available  Price:  $137,500

Manufactured 2018, 1800 hours, very excellent condition, Detroit 60 Series engine, Allison transmission, 800 psi, dims/weight 20’ x 10’ x 8’, 20,000 lbs  Price:  $320,000

14 liter Detroit Diesel, 6061 Allison automatic transmission, rebuilt power end, new expendables in fluid end, new charge pump, skid, tanks, Pilfer 5 valve manifold, 15k fluid end, new paint  Price:  $215,000

110mm (4.331") bore x 190mm (7.480") stroke, 5000 psig, 125 rpm, 151.6 gpm, 350 psig, stainless steel flud end, Cummins Big Cam, Model NTC-350, built 1980, Eaton 23-speed manual transmission, Philadelphia Model 13HP-2 gear reducer rated 496 hp ratio 14:1, input 1760 rpm, output 126 rpm, pressurized lubricant system, fuel tank 300 gal, trailer mounted, 11"7"H x 41"4"L x 8"1"W double frame triple axle, king pin to 5th wheel, air brakes and lights, approx. 68,700#, located South America  Price:  $90,000

Manufactured 1999, 1000 gal holding tank, (2) 3 x 4 Mission Magnum pumps with mechanical seals, MC255-2C mud cleaner, sand guzzler, Versa-drill rig jacks, Perkisn engine, spare hyd pump and filters, well maintained, ready to work  Price:  $59,500PRICE REDUCED: $49,500

Mounted on 12K GVRW trailer, hydraulic powered spool with approximately 500 of 2” hose, internally routed power and safety cable, 7.5 HP pump and motor, Whisper Watt 25kva 3-phase diesel generator with approx. 3100 hours  Price:  $45,000

Buyer acknowledges and agrees that all equipment / parts are sold as is / where is without guarantee or warranty of any kind, either expressed or implied.