oilwell a1700pt mud pump specifications in stock

Since the NOV A1700-PT Triplex Mud Pump was built approximately 60 years ago, the industry has widely accepted the three cylinder or triplex style pump. Triplex mud pumps are manufactured worldwide, and many companies have emulated the original design and developed an improved form of the triplex pump in the past decade.

NOV A1700-PT Triplex Mud Pumps have many advantages they weight 30% less than a duplex of equal horsepower or kilowatts. The lighter weight parts are easier to handle and therefore easier to maintain. The other advantages include;They cost less to operate

One of the more important advantages of triplex over duplex pumps, is that they can move large volumes of mud at the higher pressure is required for modern deep hole drilling.

NOV A1700-PT Triplex Mud Pump is gradually phasing out duplex units. In a triplex pump, the pistons discharge mud only when they move forward in the liner. Then, when they moved back they draw in mud on the same side of the piston. Because of this, they are also called “single acting.” Single acting triplex pumps, pump mud at a relatively high speeds. NOV A1700-PT Triplex Mud Pump has three pistons each moving in its own liner. It also has three intake valves and three discharge valves. It also has a pulsation dampener in the discharge line.

DESCRIPTIONLINERREFER TO GUIDE TO ORDERING CHART ON PG. 6 FOR TYPE (G); (Y); AND FOR BORE SIZE (XX)LINER GASKET(REFER TO GUIDE TO ORDERING CHART FOR TYPE AND SIZE (XX)WEARPLATEWEARPLATE GASKET (ALSO AVAILABLE IN URETHANE P# 2974-1U)PISTON(REFER TO GUIDE TO ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY)PISTON BUSHING(FROM 1-5/8 TO 1-1/2 STRAIGHT BORE)PISTON SEALPISTON ROD (WITH 1 -8 ELASTIC STOP NUT)PISTON ROD NUTPISTON ROD CONNECTING STUD(WITH WATER HOLE)SUB RODROD CLAMP(WITH WATER JACKET)HOSE (1/2 X 30 WITH 1/2 MALE X 3/8 MALE CONNECTIONS)PIPE (3/8 X 12 GALVANIZED AND THREADED ON ONE END)BOLT (5/8-11 GRADE 8 BOLT WITH LOCK NUT AND WASHER)PONY RODVALVE COMPLETEVALVE INSERTVALVE SPRINGVALVE SEATHYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG)SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 17-24)VALVE COVER FLANGESCREW GLANDPLUG (COMPLETE WITH VALVE GUIDE; BUSHING; AND SCREWS) INCLUDES ITEMS 21, 22, & 23HP VALVE COVER PLUG NITRILE SEAL(ALSO AVAILABLE IN URETHANE SEAL USE P# P129U)VALVE GUIDE (COMPLETE WITH BUSHING #4700I)VALVE GUIDE BUSHING (ALSO AVAILABLE IN URETHANE P# 4700IU)VALVE GUIDE SCREWVALVE COVER STUD (WITH SW PART# HHN1250-7 1 -7 HEAVY HEX NUT)OILWELL VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 22, AND ITEMS 25-28)VALVE COVER

Premium can make and supply Hy-Chrome liners and Zicornia/Ceramic Liners for Emsco, Brewster, National Oilwell, Ideco, Gardner Denver, Weatherford, Drillmec, Bomco, Honghua, RG, Rongsheng, TSC, LS NOV, POT, Bentec, Wirth, Southwest, Ewco, Lewco, Baker Forum, Mud King, OPI, Texma, Haihua Group and more. We also have extensive knowledge of older and obsolete mud pumps and their parts. Our reach extends to customers around the world.

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

BW160/BW200/BW250 mud pump are mainly used for irrigation agricultural machinery.the main characteristic is the high pressure,lift much,less engergy consumption,easy operation,high quality and duarable,easy to move,especially for mountain terraces of irrigation.

They are also the main equipment of the geological survey,the main role in the process of core drilling boreholes is to supply fluid(mud or water),making it circulate during drilling and carry rock waste back to the ground,in order to achieve and maintain the bottom hole clean and lubricate drill bits and drilling tools with cooling.

They are also the main equipment of the geological survey,the main role in the process of core drilling boreholes is to supply fluid(mud or water),making it circulate during drilling and carry rock waste back to the ground,in order to achieve and maintain the bottom hole clean and lubricate drill bits and drilling tools with cooling.

BW-250 Mud Pumps is equipped with drilling rigs to drill holes with mud. During drilling mud pump pumps slurry to the hole to provide coat to the wall, to lubricate the drilling tools and to carry the rock debris up to the ground. It is applied to geological core drilling and prospecting drilling with depth less than 1500 meter.

We have specilized in research, development and produce of rock blasting drilling rig, water well drilling rig, diamond core drilling rig, anchor drilling rig,Mud pump and relative accessories & drilling services. constantly provide professional drilling solutions for all customers with our advanced technology, excellent equipment, strict testing means and perfect service network, which establish our brand "JINCHENG" a good image of market, now,we products account for 50% of domestic market and have been export to more than 40 countries, and we awarded ISO9001: 2000 in November, 2002.

A: Normally mud pump products will take about 3-15 days to produce the ordered machines. Most of the time, we can have an immediate delivery of our regular machines in 15 days.

For spares we usually have at stock, for mud pump may need 15-20 days to delivery, and other drilling rig equipment need to quote the shortest delivery time according to your need.Spares packing in wooden box.Mud pump usually packing in nude.