oilwell a1700pt mud pump specifications free sample

Since the NOV A1700-PT Triplex Mud Pump was built approximately 60 years ago, the industry has widely accepted the three cylinder or triplex style pump. Triplex mud pumps are manufactured worldwide, and many companies have emulated the original design and developed an improved form of the triplex pump in the past decade.

NOV A1700-PT Triplex Mud Pumps have many advantages they weight 30% less than a duplex of equal horsepower or kilowatts. The lighter weight parts are easier to handle and therefore easier to maintain. The other advantages include;They cost less to operate

One of the more important advantages of triplex over duplex pumps, is that they can move large volumes of mud at the higher pressure is required for modern deep hole drilling.

NOV A1700-PT Triplex Mud Pump is gradually phasing out duplex units. In a triplex pump, the pistons discharge mud only when they move forward in the liner. Then, when they moved back they draw in mud on the same side of the piston. Because of this, they are also called “single acting.” Single acting triplex pumps, pump mud at a relatively high speeds. NOV A1700-PT Triplex Mud Pump has three pistons each moving in its own liner. It also has three intake valves and three discharge valves. It also has a pulsation dampener in the discharge line.

DESCRIPTIONLINERREFER TO GUIDE TO ORDERING CHART ON PG. 6 FOR TYPE (G); (Y); AND FOR BORE SIZE (XX)LINER GASKET(REFER TO GUIDE TO ORDERING CHART FOR TYPE AND SIZE (XX)WEARPLATEWEARPLATE GASKET (ALSO AVAILABLE IN URETHANE P# 2974-1U)PISTON(REFER TO GUIDE TO ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY)PISTON BUSHING(FROM 1-5/8 TO 1-1/2 STRAIGHT BORE)PISTON SEALPISTON ROD (WITH 1 -8 ELASTIC STOP NUT)PISTON ROD NUTPISTON ROD CONNECTING STUD(WITH WATER HOLE)SUB RODROD CLAMP(WITH WATER JACKET)HOSE (1/2 X 30 WITH 1/2 MALE X 3/8 MALE CONNECTIONS)PIPE (3/8 X 12 GALVANIZED AND THREADED ON ONE END)BOLT (5/8-11 GRADE 8 BOLT WITH LOCK NUT AND WASHER)PONY RODVALVE COMPLETEVALVE INSERTVALVE SPRINGVALVE SEATHYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION IN CATALOG)SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 17-24)VALVE COVER FLANGESCREW GLANDPLUG (COMPLETE WITH VALVE GUIDE; BUSHING; AND SCREWS) INCLUDES ITEMS 21, 22, & 23HP VALVE COVER PLUG NITRILE SEAL(ALSO AVAILABLE IN URETHANE SEAL USE P# P129U)VALVE GUIDE (COMPLETE WITH BUSHING #4700I)VALVE GUIDE BUSHING (ALSO AVAILABLE IN URETHANE P# 4700IU)VALVE GUIDE SCREWVALVE COVER STUD (WITH SW PART# HHN1250-7 1 -7 HEAVY HEX NUT)OILWELL VALVE COVER ASSEMBLY: (QTY PER ASSY CONSISTS OF ITEMS 22, AND ITEMS 25-28)VALVE COVER

The Double angle O-ring valve is made with a tough one-piece body to run more hours between change outs. It’s made with carburized premium alloy steel to resist wear, provide a positive seal, and help protect against wash out or damage to the pump.

NOV 12-P-160 Mud Pump is rated at 1600 input horsepower (1193 kw) at 120 strokes per minute, with a 12-inch (304.8 mm) stroke. Multiple liner sizes allow pressures and volumes to handle circulation requirements in deep drilling applications.

Flexibility: Compact engineering provides higher efficiency in less space. The NOV 12-P-160 Triplex Mud Pump light weight and flexible design make it easily adaptable to a variety of rig configurations. This provides flexibility as drilling requirements and conditions change.

Fluid End Modules: NOV offers a choice of fluid end modules and valve covers for every P Series pump model to select the fluid end module that exactly matches drilling requirements. All pump models can be equipped with either the standard or premium forged, two-piece interchangeable fluid modules

The Oilfield Equipment related post NOV 12-P-160 Triplex Mud Pump Used [AE] is from Flowtech Energy. Looking for Oilfield Equipment including New, Used, Remanufactured and Surplus Oilfield Supply, check out our inventory or call our toll free number at 877-645-6693 for more information.

v Also Maintaining All Rig Assets Such As Cranes, Life Boats, Bulk Cement Tanks, Bulk Mud Tanks, Life Rafts,Co2 System, Fire Extinguishers, Skidding System, Jacking System, Void Tanks, Bilge System, STP, OWS, Loading Stations, Anchor Winches, Loose Gears, WTDS, Hatches, Safety Equips. SCBA.

· Reconditioning of pump motors, sump pumps, shale shakers, agitators, centrifugal pumps, wire drawing machines, hydraulic pump motors, lightning circuits, water well pumps etc.

Mid Career Hire (Chief Engineer) Day to day Maintenance on all equipment. Repairs & rebuilding of pumps and all drilling associated equipment. Manufacturing and machining of parts.

Day to day Maintenance on all equipment. Repairs & rebuilding of pumps and all support systems such as water purification and breathing air compressor. Manufacturing and machining of parts on Lathe, Milling and general workshop machines. Design and drawing parts for manufacturing, purchasing and training purposes.

Crane Maintenance and repairs. Maintenance and repairs on Crude oil separation plants, bull heading pumps and Crude oil transfer pumps. Repairs, replacement, modification and rebuilding of various types of valves. (Mechanical, Electrical and Pneumatic)

Mechanical/Diesel Technician Day to day Maintenance on all equipment. Repairs & rebuilding of pumps valves and all life support equipment. Manufacturing and machining of parts. Service and maintenance on all cranes. Maintenance and repairs on Natural Gas separation plants and transfer systems.

· Assist the Tool pusher daily to perform activities, ensure all timesheets filled for drilling crew, Supervises and coordinates activities of workers engaged in drilling oil and gas wells in area consisting of one or more well sites: Directs workers to erect, dismantle, and move drilling rigs, and drilling crews in setting up and operating power units, draw works and other drilling equipment, Plans delivery of drilling tools, fuel, water, and other supplies for use at drill site. Orders type of drilling bits to be used, according to type of strata encountered. Directs workers in mixing drilling mud and circulating mud in borehole, and in use of special drilling mud to prevent blowouts from gas pressure.

SAPESCO. Drilling & Work Over Co. Syria: working as Assistant Driller position. hand disk Brake & Kelly Drive Draw work capacity 1500 HP. Mud pumps 1600 HP also Triplex in Rig# 4 in Syria From 2012 till now

SAPESCO. Drilling & Work Over Co. Syria: worked as Derrick man hand disk Brake & Kelly Drive Draw work capacity 1500 HP. Mud pumps 1600 HP also Triplex in Rig# 4 in Syria From 2007 till 2008

Operates pump, rotary table, and draw works controls to drill ahead, change bits, run casing or tubing, run finishing or testing tools, change blowout preventer, install well-head equipment or to accomplish other work required in the rotary drilling process

Determines down the hole conditions by close observation and interpretation of mud weights, circulating pressures, pit levels, penetration rates, drilling string weights, drilling string torque, etc. and takes action as indicated.

Prepares tour report of drilling activity showing footage made, drilling, dead or lost time, and other work performed, including repairs made to mud pumps and other non-motive rig equipment.

* Receives and follows up Driller’s instructions for the repair and maintenance of various drilling equipment such as mud mixer, shale shaker, distiller and de-sander to ensure trouble free operations.