triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

Mud pumps are the heart of your drilling operation. Bridges Equipment is the leading authority on the unitization of triplex mud pumps. As an OEM distributor for Caterpillar Rig Power, Detroit Diesel, and Joliet motors, we provide our customers with a wide range of options to meet their pump needs.

A malfunctioning mud pump can throw an entire drilling operation off schedule. Our fleet of mud pump packages are available to rent while the broken unit is being repaired, so your drilling operation never misses a beat.

Our Gardner Denver, RSF, and Continental Emsco triplex pump packages range from 500-1600 HP and can be fully customized to suit your project. Contracts are offered for as few as 10 days, so whether you need to replace a broken unit or need a long-term rental to act as a backup pump, we’ve got you covered.

triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

We pledge to provide exceptional products and service to our rental fleet customers. To meet this promise, each unit is rebuilt to like-new condition before delivery and uses only OEM parts. Packages processed through our rental depot in Odessa, Texas, are 100% function tested and painted to ensure full satisfaction upon start up. We strive to have the most up-to-date technology available on our rental fleet units. This means continually innovating, updating, and fabricating new units for the fleet and providing new service options to our customers.

triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

Triplex Pumps - We carry a wide range of Mud Pumps and Mud Pump packages. We have both duplex and triplex Emsco pumps and packages. We also carry of our line of Goldmark F-Series pump.... More Info

Triplex Pumps - Gardner Denver PAH skid mounted, powered by 8v71 Detroit, skid mounted, PTO driven charge pump, 2 valve discharge manifold and Spicer Manuel 5 speed transmission. More Info

Triplex Pumps - Quantity: 2. Gardner Denver PAH, triplex pump equipped with 5-inch pistons and liners, equipped with 8V9Z diesel engine through a manual transmission More Info

triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

If your project includes pumping water that contains large amounts of solids and debris, rent a trash water pump system designed specifically for your needs. At E-Pump, our in-house pump specialists can precisely fit the industry’s top performing diesel trash pump for your application.

E-Pump trash water pumps are ideal for sewer bypass systems and digester tank pumping and are the pump of choice for pumping drilling mud or fluid. Features include:

The Eradicator, a solids management system adaptor, should be used when a pumping project contains liquid with stringy and clog-prone materials, such as sanitary wipes, plastic bags, hair, sludge, feathers, et

triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

Sunbelt Rentals helps you determine the most productive and cost effective pumping equipment solution for all your fluid handling needs. In terms of pumping equipment, we operate an extensive, modern, and well-maintained pump rental fleet varying in total head pressure that includes both centrifugal pumps and positive displacement pumps. Specifically, we offer diesel and electric silenced and open frame trash pumps, air diaphragm pumps, submersible pumps, small utility pumps, and hydrostatic test pumps, as well as an assortment of specialty application pumps including chopper, diesel double diaphragm and high head models. We also carry a complete line of pumping accessories, from hoses, discharge pipes, valves, and flanges to fittings, transducers, and road ramps.

triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

It’s time for piston mud pumps to enter the 21st century. Centerline Mud Pumps utilize common, industry-proven, and easily obtained fluid end parts. Designed to give you better flow capacity, pressure, size and weight advantages, that you won’t find anywhere else. Centerline Mud Pumps are built to exceed the most demanding specifications in the industry. These pumps are built to last.

Centerline Manufacturing is pleased to introduce their line of hydraulic drive mud pumps. Since 1983, Centerline Manufacturing has been involved in the design, manufacture, and production of drilling equipment, support equipment, and tooling for the water well industry. Our line of mud pumps include several new milestone technologies not found anywhere else in the industry.

Provides 150-180* GPM (Gallon Per Minute) of standard mud flow at 350 psi continuous. The 180 GPM is a provisional condition that requires the mud pressure to be below 275 psi and the hydraulic oil temperature below 165 degrees F.

Provides 300-360* GPM (Gallon Per Minute) of standard mud flow at 350 psi Continuous.  The 360 GPM is a provisional condition that requires the mud pressure to be below 275 psi and the hydraulic oil temperature below 165 degrees F.

Provides 450-540* GPM (Gallon per Minute) of standard mud flow ar 350 psi Continuous.  The 540 GPM is a provisional condition that requires the mud pressure to be below 275 psi and the hydraulic oil temperature below 165 degrees F.

triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

DRILLMEC’s GD Series is the new generation of Gear Driven Triplex Mud Pumps in the ranging from 1600 to 2400 hp for both onshore and offshore drilling operations.

The direct gear driven transmission between the AC motor and the cranshaft together with the top mounted configuration gives to the GD Series Mud Pumps a very compact design despite their high volume and high pressure capabilies.

triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

We also served as the acting shop and field repair representative for the Western Gear Company and as a manufacturing facility for Wilson Manufacturing Company based in Wichita Falls, Texas. Wilson was a manufacturer of well service rigs and mud pumps. SMC Inc. has served and currently serves as a manufacturing and repair center for Oil Well Supply, Cabot-Franks, National, Halliburton, The Western Company, B.J. Hughes, Gardner Denver and many others. We manufacture a triplex pump of 165 H.P. with parts interchangeable to the Gardner Denver model TEE and are currently developing a 500 H.P. pump with parts interchangeable to Oilwell"s SA-644-5 pump. SMC has a large warehouse full of quality replacement parts for various types of equipment such as Triplex Plunger Pumps, Mud Pumps, Swivels, Drawworks and Rotaries.

We manufacture positive displacement pumps and replacement parts vital to the oil industry worldwide. We have customers that include both domestic and foreign oil companies. We also manufacture and repair a variety of products used in routine maintenance by customers with rock crushers, aggregate and commercial cement manufacturing plants.

triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

The NOV 12-P-160 Mud Pumps includes (3) Three New National 12-P-160 Triplex Mud Pumps 1600 HP, 7-1/4″ bore x 12″ stroke, single acting. 5000 PSI fluid ends. 1600 HP Bare Mud Pumps are currently configured for Offshore Service. The NOV 12-P-160 Mud Pumps are located in Houston and ready to be unitized for service.

Forged Steel crankshaft, Individual forged steel two piece interchangeable standard modules, 6-1/2” mission fluid king liners, Standard polyurethane valves and seats, Two piece fast change piston rods, Supreme pistons, Metal to metal liner retention, Clamp type liner and piston rod connections, Fast change valve covers standard, Piston liner lubricant spray system, Liner spray pump, Power end lube system with filter. Mounted on Integral two runner skid, Suction Manifold with vertical suction stabilizer, Suction line pressure relief valve, set for 70 PSI

Includes: motor supports, motor frame, tensioning screws, 2 V-belt guards, 2 pump Sheaves, 2 motor sheaves, banded V-belts, Holes to be drilled to accept EDM D79 Or GE-752 Traction Motors

National Oilwell Varco (NOV) is an American multinational corporation based in Houston, Texas. It is a leading worldwide provider of equipment and components used in oil and gas drilling and production operations, oilfield services, and supply chain integration services to the upstream oil and gas industry. The company conducts operations in more than 600 locations across six continents, operating through three reporting segments: Rig Technologies, Wellbore Technologies, and Completion & Production Solutions. National Oilwell’s two main predecessors, Oilwell Supply and National Supply, were founded in 1862 and 1893, respectively. These two companies manufactured and distributed pumps and derricks.

triplex mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> rental factory

Distributor of engineered fluid handling pumps, packaged pumping systems, repairs, parts, & integrated pump control systems. Mud pumps, chiller/condenser pumps, plumbing pumps, boiler feed systems, in-line circulators, condensate systems, sump & sewage pumps, end suction pumps, submersible sump & sewage, non-clogs & grinders, self primers, packaged lift stations, variable speed pump systems, metering pumps, chemical injection systems, chemical mixing systems, peristaltic pumps for chemical feed, high viscous & shear sensitive fluids, self primers, stainless steel, trash pumps, hot oil pumps, vertical turbine pumps, sanitary pumps, marine pumps, industrial pumps, ANSI end suction, vertical cantilever, double suction, non-clogs, progressive cavity pumps, helical gear pumps, well pumps, lab pumps, hose pumps, control valves, check valves, air release valves, tanks, pressure vessels.