1.5 hp mud pump in stock

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

An effluent pump is typically used in septic tank applications. Effluent is the gray wastewater that remains after the solids settle out. - See more at: http://www.libertypumps.com/Category/effluent-pumps#sthash.s9eLcImw.dpuf

Sewage Ejector submersible pumps can handle raw sewage pumping jobs. These pumps are designed to pump raw sewage wastewater, usually from a pump station in a basement or just outside of the house, to your septic tank or aerobic treatment system.Residential and Light Commercial Waste Removal

Often referred to as Mud pumps or Sludge pumps, diaphragm pumps are designed to pump mud, slurry, sewage, and thick liquids that have the ability to flow. Designed for use with non-flammable liquids which are compatible with pump component materials.

Have questions about this product? Our pump experts are available toll-free at 888-817-8677. Our veteran engineers will help you quickly determine the best option for your application or project.

The AMT line of Diaphragm pumps features a 2-stage, heavy duty forged gear driven transmission. Often referred to as Mud or Sludge Pumps, diaphragm pumps are designed to pump mud, slurry, sewage and thick liquids that have the ability to flow. AMT Diaphragm pumps are available with a choice of drivers to meet your application requirements: single or three phase electric motor. Built-in check valve assures self-priming to 20 feet after initial prime. Heavy duty forged gear driven transmission is designed to operate pump at 40 strokes per minute for electric motor models and 60 strokes per minute for engine driven models. Each unit includes a 2" or 3" NPT steel suction strainer, two NPT nipples and a wheel kit for portability. Models 338E K6, 338G-K6, 337H-K6 and 337E-K6 are kits provided less motor or engine. Suction and discharge port sizes cannot be reduced.

Buy CG 15 HP 960 RPM (6 Pole) Foot Mounted (B3) General Purpose Induction Motor, Energy Efficiency Level 2 (IE2) Squirrel cage Induction Motor with E..

We have attained huge reputation as prominent manufacturer and supplier of Portable Dewatering Submersible Pumps. These pumps are well accepted in the market for their light weight, robust construction and excellent functional accuracy. We design these pumps by utilizing latest tools and techniques as per latest industrial norms with quality tested raw materials. We supply these machines in wide specifications at affordable price range to our customers.

• Portable submersible pumps are one of its kinds. We have a wide range of selection within the same Horse Power rating for these pumps. Our construction is robust compared to other make pumps and has proved its self in the market with its trouble free Operation

• Motor – submersible pumps are available in Single phase and three-phase squirrel cage induction dry motor with ‘F" class insulation and IP 68 protection

• We provide pumps with Aluminum MOC, which will make the pump very light and will be extremely handy for the operator. Trolley mounted construction is also an available option

Submersible sludge pumps JS and XJS are excellent for pumping dirty water and water mixed with solids. The slim design makes the pump easy to move and easy to handle. Pumps with built in AquaTronic unit will always have correct direction of impeller rotation, ensuring peak performance and reduced wear.

A wide variety of 1.5 hp submersible sewage pump options are available to you, You can also choose from high pressure, low pressure and ultra high pressure 1.5 hp submersible sewage pump,as well as from 3 years 1.5 hp submersible sewage pump and whether 1.5 hp submersible sewage pump is oem, odm, or obm.

The rugged DAE Pumps Gulfport D540H drainage pumps move clean and dirty water with small solids up to .32-inches. These submersible drainage pumps with 4-inch discharge can move liquid at 310 GPM up to 135-feet via 8.5 horsepower. This 60Hz pump is available in 575-600V.

Offering the same high-quality, the DAE Pumps Gulfport D540S drainage pumps move clean and dirty water with small solids up to .32-inches. These durable drainage pumps with 4-inch discharge can move liquid at 310 GPM up to 135-feet via 8.5 horsepower. This 60Hz pump is available in 460V and 575-600V.

DAE Pumps Gulfport D640X drainage pumps handle clean and dirty water with small solids up to .32-inches. These rugged drainage pumps with 4-inch discharge can move liquid at 260 GPM up to 250-feet via 11.5 horsepower. This 60Hz pump is available in 575-600V.

DAE Pumps Gulfport D640H drainage pumps move clean and dirty water with small solids up to .32-inches. These reliable drainage pumps with 4-inch discharge can move liquid at 340 GPM up to 170-feet via 11.5 horsepower. This 60Hz pump is available in 575-600V.

The reliable DAE Pumps Gulfport D640S drainage pumps handle clean and dirty water with small solids up to .32-inches. These durable submersible pumps with 4-inch discharge can move liquid at 700 GPM up to 100-feet via 11.5 horsepower.  This 60Hz pump is available in 460V and 575-600V.

The high-quality DAE Pumps Gulfport D740H drainage pumps move clean and dirty water with small solids up to .27-inches. These reliable drainage pumps with 4-inch discharge can move liquid at 300 GPM up to 254-feet via 15 horsepower. This 60Hz pump is available in 440-480V.

DAE Pumps Gulfport D840H drainage pumps process clean and dirty water with small solids up to .47-inches. These rugged submersible pumps with 4-inch discharge can move liquid at 760 GPM up to 240-feet via 31 horsepower. This 60Hz pump is available in 460V, 480V, and 575-600V.

DAE Pumps Gulfport D940H drainage pumps handle clean and dirty water with small solids up to .27-inches. The most powerful of our 4-inch drainage pumps come with a 4-inch discharge and move liquid at 560 GPM up to 325-feet via 36 horsepower. This 60Hz pump is available in 440-480V.

The high-performing DAE Pumps Sonora S540 Submersible Sludge Pumps handle thick, soft, wet mud and sludge with solids up to 2-inches. These heavy-duty submersible sludge pumps with 4-inch discharge can move material at 365 GPM up to 92-feet via 7 horsepower. This 60Hz pump is available in 230V and 460V options.

DAE Pumps Sonora S640 Submersible Sludge Pumps offer the ultimate performance in moving mud and sludge with solids up to 2-inches. With a 4-inch discharge, these sludge pumps transfer material at 420 GPM up to 100-feet via a 9.2 HP motor.  This 60Hz pump is available in 230V and 460V options.

The rugged DAE Pumps Miramar L540 Submersible Slurry Pumps process abrasive materials with solids up to 1-inch. These durable slurry pumps with 4-inch discharge move material at 308 GPM up to 57-feet via a 7 HP motor.  This 60Hz pump is available in 460V.

Offering the same high-quality, the DAE Pumps Miramar L640 Submersible Slurry Pumps move abrasive materials with solids up to 1-inch. With a 4-inch discharge, these heavy-duty slurry pumps process material at 440 GPM up to 75-feet via a 12 HP motor.  This 60Hz pump is available in 460V.

The heavy-duty DAE Pumps Miramar L740 Submersible Slurry Pumps transfer abrasive materials with solids up to 1-inch. With a 4-inch discharge, the Miramar L740 slurry pumps move material at 616 GPM up to 85-feet via a 15 HP motor.  This 60Hz pump is available in 460V.

DAE Pumps Miramar L840 Submersible Slurry Pumps move abrasive materials with solids up to 1-inch. With a 4-inch discharge, these reliable slurry pumps process material at 660 GPM up to 98-feet via a 20 HP motor.  This 60Hz pump is available in 460V.

The high power 4-inch DAE Pumps Miramar L940 Submersible Slurry Pumps move abrasive materials with solids up to 1.5-inches. These 4-inch discharge submersible slurry pumps move liquids and solids at 880 GPM up to 171-feet via a 50 HP motor.  This 60Hz pump is available in 460V.

DAE Pumps Tampa 437 Submersible Slurry Pumps are rugged, reliable, and cost-effective pumps for transporting slurry, sand, and a variety of other abrasive materials. The durable DAE Pumps Tampa 437 offers an open stand or strainer, and agitator provides improved suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 437 submersible slurry pumps transfer solids and liquids at a flow rate of up to 476 GPM and with 5 HP.

DAE Pumps 455-P Submersible Slurry Pumps are rugged, reliable, and cost-effective pumps for transporting slurry, sand, and a variety of other abrasive materials. The DAE Pumps 455-P with an open stand and agitator allows for ideal suction and movement of solids up to 1-inch with a 4-inch discharge. The ergonomic 455-P submersible slurry pumps transfer solids and liquids at a flow rate of up to 594 GPM and with 7.5 HP.

DAE Pumps Tampa 455 Submersible Slurry Pumps are rugged, reliable, and cost-effective pumps for transporting slurry, sand, and a variety of other abrasive materials. DAE Pumps Tampa 455 offers an open stand or strainer, and agitator that provides greater suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 455 submersible slurry pumps transfer solids and liquids at a flow rate of up to 594 GPM and with 7.5 HP.

DAE Pumps Tampa 4110 Submersible Slurry Pumps are rugged, reliable, and cost-effective pumps for transporting slurry, sand, and a variety of other abrasive materials. The efficient DAE Pumps Tampa 4110 offers an open stand or strainer, and agitator that provides enhanced suction and movement of solids up to 1-inch through a 4-inch discharge. The ergonomic Tampa 4110 submersible slurry pumps transfer solids and liquids at a flow rate of up to 819 GPM and with 15 HP.

The heavy-duty and reliable DAE Pumps Galveston 3304 Submersible Sludge and Slurry Pumps are the latest technology in submersible pumps for transporting slurry, sand, and a variety of other abrasive materials. DAE Pumps Galveston 3304 pumps with a combined strainer with a partially open stand and agitator allows for ideal suction and movement of solids up to 1.5-inches with a 4-inch discharge. The Galveston 3304 submersible slurry pumps transfer solids and liquids at a flow rate of up to 792 GPM and with 30 HP.