2 mud pump hose manufacturer

Goodyear Pneumatic Jack Hammer Hose Assembly Application A quality hose for use with mobile air compressors to 150# working pressure. Construction Black, oil mist resistant rubber tube, two braid...

PYROFLEX® II Hot Air Blower Hose | Continental APPLICATION: For conveying hot air from compressors to tanks on bulk dry material carriers. CONSTRUCTION TUBE: Black heat-resistant...

Sand Blast Hose  For conducting sand, steel shot or other sharp abrasives at high velocity. Available with Aluminum Nozzle Holders and Hose Ends that attach over the hose. Hose ends and...

Mortar Polyurethane hose is an easy to handle concrete placement hose. The Lay-Flat design allows improved flow control and lower placement rates ideal...

High-pressure mud hose also called rotary hose, vibrator hose or jumper hose, is used to convey drilling fluid from mud pump to the mud standpipe manifold on the drill floor. It is available in bore sizes from 2" to 6" and up to 120 ft. length. To meet different requirements on the market, API end fittings such NPT thread and flange and other specified fittings are supplied.

Mud delivery hoses are lined with specially compounded synthetic rubber tube and cover. They have excellent resistance against abrasion and corrosion from oils.

Series 7309 is a heavy duty, high pressure discharge hose designed to handle drilling mud, mild chemicals, petroleum waste and water. The hose construction incorporates a heavy wall for durability and a static wire as a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, heat, mild chemicals and weathering. Series 7309 is available in 200-foot continuous lengths.

505 mud pump hose products are offered for sale by suppliers on Alibaba.comAbout 51% % of these are rubber hoses, 19%% are pumps, and 1%% are mud pump.

A wide variety of mud pump hose options are available to you, such as 1 year, not available and 2 years.You can also choose from new, mud pump hose,as well as from energy & mining, construction works , and machinery repair shops mud pump hose,and whether mud pump hose is 1.5 years, or unavailable.

Heavy wall thickness reinforced with multiple woven textile plies and static wire is used by HIC Universal in manufacturing drilling rotary hose pipe product, fully tested as per IS and international standards that covers full testing in well-equipped HIC’s Testing Laboratory and stamped with identification coding.

Warranty: Manufacturer warrantees mud pump hoses to be free from manufacturing defects and shall replace or repair if found defective in workmanship within 1 year from the date of shipment.

Roll Lengths manufactured are 3 meters Min. (= 9.85 feet Approx.) and 20 m Max up to 5inch Inner Diameter size hose. Above 125mm (=5”) NB, Max. Length produced is 10 meters.

Distributor of unreinforced, reinforced, FEP, lined, cell culture, braided, peristaltic pump, flexible, antimicrobial and chemical resistant hose. Made from polyvinyl chloride (PVC), polyurethane, nylon, polypropylene, polyethylene, polytetrafluoroethylene (PTFE), vinyl, Viton®, thermoplastic elastomer, polyetherimide, stainless steel, rubber and other materials. Available in various length and 1/16 to 12 in. dia. Serves the food and beverage, medical, surgical, hospital, laboratory, pharmaceutical and semiconductor industries. Most items available in stock. 24/7, pump repair, export and material identification services provided. Same day shipping.

White jacketed fire / mill discharge hose 2" x 50FT. Lay flat water discharge hose. Factory assembled with quick connect cam couplings MxF. Aluminum cam lock couplings.

◾50Ft. Series 1131 Mill Discharge Hose Assembly, Black SBR age resistant rubber tube. White single jacket all polyester cover. Will NOT absorb moisture. 125PSI @ 70F test pressure. Available with threaded NH or quick connect camlocks.

Max. Flow is based on reasonable friction loss for size hose over a 100FT length of hose (does not take into account any elevations). See Hose Friction loss chart for more information.

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

Afghanistan, Africa, Alaska/Hawaii, Argentina, Armenia, Azerbaijan Republic, Bahrain, Bangladesh, Barbados, Bermuda, Bhutan, Bolivia, Brunei Darussalam, Cambodia, Canada, Central America and Caribbean, Chile, Colombia, Ecuador, Falkland Islands (Islas Malvinas), French Guiana, French Polynesia, Georgia, Greenland, Guadeloupe, Guyana, Hong Kong, India, Indonesia, Iraq, Israel, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Laos, Lebanon, Libya, Macau, Malaysia, Maldives, Martinique, Middle East, Mongolia, Nepal, New Caledonia, Oceania, Oman, Pakistan, Paraguay, Peru, Philippines, Qatar, Reunion, Russian Federation, Saint Pierre and Miquelon, Saudi Arabia, Singapore, South Korea, Southeast Asia, Sri Lanka, Suriname, Taiwan, Tajikistan, Thailand, Turkey, Turkmenistan, Ukraine, United Arab Emirates, Uzbekistan, Venezuela, Vietnam, Yemen

The HMI HM-1 hydraulic mudjacking pump was the first concrete raising product engineered and manufactured by HMI, just over 40 years ago. It’s reliability and superior engineering maintains its place in the market, but has also acted as the springboard for other, more advanced models / options which offer various options of engine horsepower, hopper size, pumping pressure, and so much more.

Our largest, self-propelled, multi-functional pump. This rugged and durable pump is the top-of-the-line mudjacking unit. With the highest available pumping pressure, largest material hopper, most horsepower and versatility.

Our most popular model, the self-propelled, hydraulic mudjacking pump drives circles around the competition. Affordable and durable, the Power Pump is a great way to start-up or add to a concrete raising business.

The spiral flex suction hose has many uses in agricultural and cleaning industries. Its hard wall and spiral reinforcement make it ideal for use in trash pumps, sludge pumps, and other high volume suction applications.

This awesome pump turns your pressure washer into a high volume sludge pump that can pump rocks and debris up to 3/4" in diameter! This pump quickly attaches to your existing pressure hose. During use it will provide a 11 to 1 or higher vacuum (4GPM produces 44GPM vacuum). The sludge pump is great for removing water from low areas, getting started with waste water reclaim, pool emptying, and flood and disaster clean up.

Excellent hose for large inlet pumps (1-1/2"), or usage on sludge pumps for cleaning out flooded areas, or transferring water from ponds to water tanks.