350 series mud pump manufacturer

3NB series mud pumps are manufactured according to SY5138 standard (China Petroleum Industrial Ministry Standard). This series mud pumps are widely used in oilfields and other industrial mining enterprises for well drilling and well repairing in China. Its price is much more competitive comparing to EMSCO F series drilling pump.

We have been focusing on producing triplex single-action mud pump and its accessories since we built our company. So far, we can offer two series products that are respectively the F-series and 3NB-series. Our F-series drilling pumps including models of RLF-500, RLF-800, RLF-1000, RLF-1300, RLF-1600 and RLF-2200 are designed and manufactured strictly in accordance with the API 7K specification (Certificate No.: 7K-0130) based on the American Emsco F-series drilling pump. Our products of the 3NB-series cover models of 3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000A/D, 3NB-1300A/D and 3NB-1600. They are designed and produced following the standard formulated by Ministry of Petroleum Industry of China and can meet the needs of different customers.

Our F-series triplex mud pumps are designed and manufactured based on the American Emsco F-series mud pump strictly in accordance with API 7K specification. All of the expendable parts are interchangeable with any other similar spare parts produced according to API specification.

The optimized design helps to improve the suction performance of our products and extend the service life of the expendable parts. Triplex mud pumps of the RL3NB series are produced and tested strictly in accordance with the SY5138 standard formulated by Ministry of Petroleum Industry of China.

Customized Mud PumpWe can design and manufacture customized pump used for mud drilling according to customer"s requirement. We provide not only the mud pump itself, but also the power system and transmission system to make a pump package. After being assembled on the well site, the pump package is ready to work.

Since all the expendable parts are compatible with other similar parts made in accordance with the API specification, F-series mud pumps are easy to maintain all over the world.

Due to compact solid structure and small size, the F-series products have excellent performance to meet the drilling technological requirements of high pumping pressure and high displacement. Designed with longer stroke for lower working stroke rate, these products have fine water filling performance and buffering performance in suction pipelines. Meanwhile, the service life of the expendable parts in the fluid end will be extended as well. The power end of this series product is durable since its lubricating system combines forced lubrication and splash lubrication together.

Because of limited parts supply, the 3NB-series mud pumps mainly sell domestically. In resent years, due to cheaper price, they become more and more popular in oversea countries, especially in Kazakhstan and Russia.

We can also design mud pump package mainly composed of the power system, transmission system and the pump itself, according to customer’s environment. Other facilities like filling system, manifolds and control system are also available. Diesel engine driving and electric motor (DC/AC variable frequency motor) driving are optional. As to transmission mode, we provide gear reducer, hydraulic coupler and hydraulic torque converter for your selection. After being assembled on the well site, the pump package will go into operation.

Our F-series triplex mud pumps are designed and manufactured based on the American Emsco F-series mud pump strictly in accordance with API 7K specification. All of the expendable parts are interchangeable with any other similar spare parts produced according to API specification.

The optimized design helps to improve the suction performance of our products and extend the service life of the expendable parts. Triplex mud pumps of the RL3NB series are produced and tested strictly in accordance with the SY5138 standard formulated by Ministry of Petroleum Industry of China.

Customized Mud PumpWe can design and manufacture customized pump used for mud drilling according to customer"s requirement. We provide not only the mud pump itself, but also the power system and transmission system to make a pump package. After being assembled on the well site, the pump package is ready to work.

Tulsa Triplex is a Tulsa Rig Iron company. We manufacture pumps from 100 to 600 horsepower for drilling, reverse circulation, hydrostatic testing, water blast, and workover applications. Utilizing roller bearings throughout, our pumps are built to last. They are designed to be easily maintained and are capable of being completely rebuilt. Available as bare pump only, with chainbox, or complete pump packages.Our skids are built tough as an oilfield type with draw bars.

For the successful execution of your projects, it is important to find an appropriate company with a good track record. We help you in connecting with the top mud pump manufacturers and companies and get the best quotation.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

Yes. We help you find the best mud pumps irrespective of your location. We simplify your search by connecting you with top mud pump manufacturers and mud pump companies in your location, according to your budget and business requirement.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

The different parts of a mud pump are Housing itself, Liner with packing, Cover plus packing, Piston and piston rod, Suction valve and discharge valve with their seats, Stuffing box (only in double-acting pumps), Gland (only in double-acting pumps), and Pulsation dampener. A mud pump also includes mud pump liner, mud pump piston, modules, hydraulic seat pullers along with other parts.

The wearing parts of a mud pump should be checked frequently for repairing needs or replacement. The wearing parts include pump casing, bearings, impeller, piston, liner, etc. Advanced anti-wear measures should be taken up to enhance the service life of the wearing parts. This can effectively bring down the project costs and improve production efficiency.

We mainly manufacturer Emsco F-500, F-800, F-1000, F-1300, F-1600,Gardner Denver PZ-9 and National 12-P-160 mud pumps. The quality products, competitive prices, respensive service and short delivery time earn a lot of reputation for us.

Product Instruction：we devoted to professionally manufacure and sales the mud pump in global,the quality and your satisfication are always being our achievement,we would,t say we are the best choice for u,but our product will tell u.+MORE

Product Instruction：This series mud pumps are strictly manufactured according to SY5138 standard of CNPC and are tested accordingly when leave factory.

Product Instruction：series mud pups are compatible and interchangeable with most of the F series mud pumps of other made like FB series (EMSCO, BOMCO and LSNOW), HHF/3NB-Fseries (Honghua), RSF (Huabei Rongsheng) RL-F series (Shandong Rongli), F series (Shandong Kerui), TFI F series (Texas First Industry),TSC, etc+MORE

Product Instruction：F-800light weight drilling pumpis designed for special drilling/workover application where equipment weight and dimension should be weill limited like drilling rig working onboard offshore platform,barge,drilling rig working in wetland,jungles and so on.it certainl can also work for conventional drillingrigs.+MORE

We are a supplier of aftermarket mud pump parts. Whether it’s a duplex or triplex pump, we offer a complete line of parts and spares that interchange with most brands. We supply everything from chrome and ceramic liners, seals, crankshafts, pistons and modules and everything in between.

Rundong offers a wide range of drilling mud pumps. The 3NB series mud pump is typically used in oilfield and industrial and mineral enterprises. It is also suitable for drilling, well workover and long distance transportation of liquid media.

The 3NB series mud pump is designed to have optimized parameters, providing increased stroke and capacity. We reduce the stroke rate reasonably to improve suction capability and extend service life of wearing parts. The followings are our 3NB series drilling mud pumps with different parameters.

Rundong is a professional drilling rig mud pump manufacturer. We also provide mud pump parts such as valve, liner, piston assembly and so on. These products are of reliable quality and low prices so that we have established stable long-term cooperation relationship with clients in the United States, Russia, Kazakhstan, and more. We have large manufacturing equipment and easy to purchase materials, we also offer OEM service to customers! If you want know more information about our products, please feel free to contact us!

Our F series mud pump are designed and manufactured on the basis of American Emsco F series mud pump strictly according to America Petroleum Institution API 7K Standard. All of its expendable parts are interchangeable with any other spare parts produced according to API standard. Therefore it is easy to repair and maintain internationally .

BEYOND products cover but not limited to: China-make oil drilling rigs, work over rigs, drill mud pump, wellhead and downhole tools, drilling tools, OCTG and other related equipment and parts. Meanwhile, BEYOND can offer technical services, personnel training and maintenance guide towards China-made drilling rigs. Only if it is what you need, BEYOND can get it for you: from best factories, with most competitive price and within shortest lead time.

A: We are professional trading company build base on our mud pump manufacturer, we are exclusive agent, and mainly products are oil drilling rig, drilling mud pump, related oilfield drilling equipment, construction machinery, water well drilling rig and etc. Our products have been exported to more than 20 countries of Azerbaijan, Kazakhstan, Asia, South America, Africa, India, Egypt, and get a good reputation in the world.

A: Generally for the pump spares we have in stock, and for mud pump and other drilling rig equipments, it will delivery in 30 working days, for 1 complete set of drilling rig, delivery time will be at least 60 working days.

The X-series mud pump type PD X-3.004 SG HDD manufactured by PRIME DRILLING impresses with its robust and low-wear design. The 7-fold bearing mounted drive shaft, which is equipped with 3 eccentric wheels, replaces the conventional crankshaft. Due to the revolution of these shafts and their maximum 230 rotations per minute operational wear of rubbers and liners are reduced to a minimum.

The pump is driven by a 470 kW CAT engine. This type of mud pump is exclusively manufactured in our Wenden plant, i.e. „made in Germany“. Its electronic gearshift in combination with eccentric wheels used instead of a crankshaft make it a high- power but low- maintenance product. All valves and plungers also comply with API standards.